[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

This week, prices of 304 stainless steel scrap off-cuts in east China strengthened to 10,000-10,100 yuan/mt; prices of stainless steel scrap off-cuts of the same specification in Foshan also rose, with the price range at 9,600-9,900 yuan/mt. In terms of raw material production costs, the current cost of producing stainless steel entirely from stainless steel scrap was about 14,098.03 yuan/mt, while the cost of production using only high-grade NPI was 14,786.98 yuan/mt. This week, stainless steel scrap prices fell back, mainly driven by macro sentiment disruptions, weak futures, and pressure on both supply and demand. Escalating geopolitical conflicts, coupled with hawkish remarks from the US Fed, dragged SS futures into the doldrums overall, with the bearish impact directly transmitted to the spot market. Stainless steel finished product prices also pulled back across the board, and market pessimism gradually spread. Prices of substitute raw materials also pulled back, while stainless steel mills showed a strong inclination to push for lower prices. NPI traders turned weaker in sentiment and sold at low prices, and the high-grade NPI market also softened. In addition, Tsingshan's April tender price for high-carbon ferrochrome was set low, not only below previous market expectations but also lower than current retail quotations, limiting room for ferrochrome prices to rise and eliminating the support from substitute raw materials for stainless steel scrap. Currently, inventory at stainless steel scrap yards remained relatively high. Coupled with tight tax invoice availability, stainless steel mills were not active in procurement tenders, and the procurement pace continued to slow down. Amid the resonance of multiple bearish factors, stainless steel scrap prices fell in line with futures and finished products. Although stainless steel scrap still maintained a clear economic advantage over high-grade NPI, under the overall weak market atmosphere, cost support was difficult to translate into price support and failed to reverse the downward price trend. Overall, the stainless steel scrap market this week showed a weak pattern of "futures drag, weaker raw materials, and pressure on supply and demand." In the short term, bearish factors are expected to dominate, and stainless steel scrap prices are expected to remain in the doldrums.

[SMM Stainless Steel Daily Review] SS Futures Stopped Falling and Rebounded, Stainless Steel Spot Quotations Rose in Tandem SMM News, March 20: SS futures stopped falling and rebounded. Base metals futures generally recovered, with SS futures showing particularly strong performance and basically recouping this week’s losses, closing at 14,160 yuan/mt by the midday close. In the spot market, driven by the strong rebound in SS futures and coupled with stainless steel mill agents’ efforts to hold prices firm, stainless steel retail quotations also moved higher accordingly; supported by improving market sentiment, both inquiry activity and trading picked up. High-grade NPI prices remained in the doldrums, and the steel mill tender price for high-carbon ferrochrome was announced below market expectations, leaving weak cost support for stainless steel. The most-traded SS futures contract stopped falling and recovered. At 10:15 a.m., SS2605 was quoted at 14,150 yuan/mt, up 220 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the 220-420 yuan/mt range. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose by 50 yuan/mt; for cold-rolled trimmed 304/2B coil, the average price in Wuxi rose by 100 yuan/mt, and the average price in Foshan rose by 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi was flat; hot-rolled 316L/NO.1 coil quotations in Wuxi were unchanged; cold-rolled 430/2B coil in both Wuxi and Foshan held steady. Entering the traditional September-October peak season, although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and procurement only...

SMM News, March 19: Total inventory in the two major stainless steel markets of Wuxi and Foshan declined further this week, falling from 998,100 mt on March 12, 2026 to 979,300 mt on March 19, down 1.88% WoW. Stainless steel social inventory extended its decline this week, with inventory in the two core markets of Wuxi and Foshan continuing to pull back WoW. Although the market has entered the traditional peak consumption season of "Golden March and Silver April," ongoing geopolitical conflicts continued to disrupt the market this week, while SS futures weakened and came under pressure, leading to a clear lack of market confidence. Overall transactions during the week were weaker than last week; even though the demand-side recovery fell short of expectations, downstream end-users still maintained a just-in-time procurement pace. Supply side, stainless steel mills faced the dual pressure of elevated production schedules and high inventory, and their willingness to ship stayed high; during the week, a major mainstream mill lowered its guidance price, directly boosting market transactions and becoming the core driver behind the slight pullback in inventory. Sentiment in both the spot market and futures was subdued. Coupled with geopolitical conflicts and limited upside in raw material prices, the market's earlier bullish sentiment completely faded, while downstream buyers only maintained just-in-time procurement with no willingness to stockpile, further constraining restocking room. Overall, this week's modest inventory drawdown mainly relied on active shipments by steel mills and support from just-in-time transactions. Current social inventory remained at a high level, and with March production schedule expectations still relatively high, pressure on inventory drawdown remained prominent. Although inventory posted consecutive declines in the short term, constrained by weak market confidence and the absence of downstream stockpiling demand, inventory is unlikely to see a substantial drawdown. Whether inventory can continue to decline steadily will still depend on close monitoring of how the geopolitical situation evolves and the pace of actual downstream demand release.

[SMM Stainless Steel Daily Review] SS Futures Continued to Pull Back, Stainless Steel Spot Quotes Were Lowered SMM News on March 19: SS futures extended their further downward pullback. Against the backdrop of hawkish remarks from the US Fed and escalating geopolitical conflicts, non-ferrous metal futures generally moved lower, with SS also declining in tandem and closing at 13,935 yuan/mt by the midday break. In the spot market, continued declines in SS futures significantly weakened market confidence; coupled with the recent pullback in high-grade NPI prices, market expectations for cost support also softened. In a market where transactions had already been sluggish this week, inquiries and deals weakened further; in addition, March supply remained high, prompting traders to lower their quotes for 304 stainless steel during the day. However, supported by news yesterday that steel mills were holding prices firm, 200-series stainless steel rose against the trend, with 201 stainless steel prices moving higher. Further attention should still be paid to downstream end-user purchase conditions. The most-traded SS futures contract fell and pulled back. As of 10:15 a.m., SS2605 was quoted at 13,930 yuan/mt, down 100 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 340-540 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose 50 yuan/mt; for cold-rolled trim-edge 304/2B coil, the average price in Wuxi fell 150 yuan/mt and in Foshan fell 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi fell 200 yuan/mt; for hot-rolled 316L/NO.1 coil, Wuxi quotes fell 100 yuan/mt; cold-rolled 430/2... in both Wuxi and Foshan.

[SMM Stainless Steel Daily Review] SS Futures Fluctuated, Rising First and Then Falling, While Spot Quotes Edged Lower and Transactions Recovered SMM News, March 17: SS futures moved sideways. During the day, SS futures rose first and then fell, overall maintaining a sideways movement pattern, and closed at 14,155 yuan/mt by the midday break. In the spot market, although SS futures were relatively strong in the morning, affected by the previous cuts in guidance prices by major stainless steel mills, trader quotes still edged slightly lower than yesterday. However, market sentiment had stabilized somewhat, and amid the price pullback, both inquiries and transactions increased to some extent. The most-traded SS futures contract fluctuated. As of 10:15 a.m., SS2605 was quoted at 14,220 yuan/mt, up 175 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi stood at 200-400 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi fell by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi fell by 50 yuan/mt, and the average price in Foshan also fell by 50 yuan/mt; cold-rolled 316L/2B coils in Wuxi were basically stable; hot-rolled 316L/NO.1 coils were quoted basically stable in Wuxi; cold-rolled 430/2B coils in both Wuxi and Foshan were basically stable. As the traditional peak consumption season of "Golden March and Silver April" began, the stainless steel market entered a window for demand recovery, with downstream end-users gradually recovering. Recently, activity in inquiries and purchases increased markedly, but stainless steel spot prices overall remained basically stable, with no obvious fluctuations. End-user procurement was still mainly driven by rigid demand, and the full bustle of the peak season had yet to emerge, ...

[SMM Stainless Steel Daily Review] SS Futures Fell Back as Steel Mill Price Adjustments Dampened Downstream Buying Interest SMM News, March 16: SS futures showed a downward pullback. Although the contract was relatively stable during Friday's night session, Monday's open was dragged lower by a broad decline across the nonferrous metals sector, with SS also pulling back to close at 14,185 yuan/mt by midday. In the spot market, affected by the decline in SS futures and an overall cut of 200 yuan/mt in the morning guidance prices from a major stainless steel mill, retail quotations in the market edged lower. Price fluctuations fueled stronger wait-and-see sentiment among downstream buyers, and intraday transactions were weak. However, market feedback indicated that transactions had been broadly steady earlier, and coupled with relatively strong expectations for the cost side of stainless steel, most market participants had not expected this round of price cuts. Traders' spot quotations fell by less than the reduction in the guidance price. The most-traded SS futures contract pulled back after falling. As of 10:15 a.m., SS2605 was quoted at 14,045 yuan/mt, down 230 yuan/mt from the previous trading day. Spot premiums for Wuxi 304/2B were in the range of 245-445 yuan/mt. In the spot market, Wuxi cold-rolled 201/2B coils were generally stable; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi fell by 50 yuan/mt and the average price in Foshan fell by 50 yuan/mt; Wuxi cold-rolled 316L/2B coils were stable; Wuxi quotations for hot-rolled 316L/NO.1 coils were stable; cold-rolled 430/2B coils in both Wuxi and Foshan were also stable. As the traditional peak consumption season of "Golden March and Silver April" begins, the stainless steel market is entering a window for demand recovery, with downstream end-users gradually resu...

Stainless steel spot prices were stable this week, but production costs rose somewhat, further squeezing stainless steel mills’ profit margins. Taking 304 cold-rolled products as an example, based on raw material prices on the day, the full-cost profit margin was -1.27% this week; calculated based on raw material inventory costs, it reached 2.21%. Nickel raw material cost side, high-grade NPI prices edged up further this week. Although a major stainless steel mill recently set relatively low procurement tender prices for high-grade NPI, strong nickel ore prices continued to provide solid cost support for NPI, traders showed strong willingness to hold prices firm, and the overall market remained bullish. Coupled with high stainless steel production schedules in March, downstream stainless steel mills maintained strong raw material demand, and the psychological price level also moved up gradually. In the short term, high-grade NPI prices were more likely to rise than fall. As of this Friday, high-grade NPI with a grade of 10-12% rose by 6.5 yuan per nickel unit to 1,094.5 yuan/nickel unit. Stainless steel scrap market side, stainless steel scrap prices strengthened this week, mainly due to the linkage with furnace charge, economic advantages, and demand support. Firm high-grade NPI and high-carbon ferrochrome prices boosted steel scrap prices higher. Stainless steel production schedules are expected to increase in March, boosting procurement demand. Stainless steel scrap still had an economic advantage over high-grade NPI, supporting bullish sentiment. However, downstream demand recovery remained limited, stainless steel social inventory stayed high, and finished product prices lacked momentum for further gains, constraining upside room for steel scrap prices. Overall, the market showed a pattern of “rising prices, raw material support, and demand under pressure,” and prices are expected to remain generally stable with slight rise going forward. As of this Friday, the price of 304 off-cuts in Shanghai rose by 600 yuan/mt to around 10,250 yuan/mt. Chrome raw material cost side, high-carbon ferrochrome prices rose slightly this week. Overseas market chrome ore futures prices continued to climb, and China chrome ore spot quotations moved up in tandem. Ferrochrome smelting costs increased, ferrochrome producers’ profits narrowed significantly, and with retail spot supply of high-carbon ferrochrome remaining tight and stainless steel production schedules staying high in March, ferrochrome prices were supported to edge up further. As of this Friday, high-carbon ferrochrome prices in Inner Mongolia rose 50 yuan/mt (50% metal content) WoW to 8,650 yuan/mt (50% metal content).

This week, prices of 304 stainless steel scrap off-cuts in east China strengthened to 10,400-10,500 yuan/mt; prices of stainless steel scrap off-cuts of the same specification in Foshan also rose, with the price range at 10,000-10,300 yuan/mt. From the raw material cost perspective, the current cost of producing stainless steel entirely with stainless steel scrap was about 14,364.47 yuan/mt, while the cost of producing it entirely with high-grade NPI was 14,640.04 yuan/mt. This week, stainless steel scrap prices strengthened and moved higher, mainly driven by the combined effects of linkage with furnace charge prices, cost-effectiveness advantages, and demand support. Stainless steel finished product prices have remained generally stable recently and struggled to rise; however, high-grade NPI prices still held firm, and high-carbon ferrochrome prices also moved higher in tandem recently. Following the trend of other furnace charge materials, stainless steel scrap also showed an upward trend. Stainless steel planned production for March is expected to rise significantly, boosting procurement demand for stainless steel scrap; meanwhile, supported by nickel ore and chrome ore, the pattern of high-grade NPI and high-carbon ferrochrome prices holding up well is unlikely to change, further driving stainless steel scrap prices higher. In addition, although the cost-effectiveness advantage of stainless steel scrap over high-grade NPI has narrowed somewhat, it still retains a considerable advantage at present, providing strong support for stainless steel scrap prices and reinforcing bullish market sentiment. However, it should be noted that the current recovery in downstream demand remains limited, and stainless steel social inventory is at a relatively high level. Stainless steel mills are facing considerable shipment pressure, causing stainless steel finished product prices to meet resistance in moving higher and in turn placing some constraints on further gains in stainless steel scrap prices. Overall, the stainless steel scrap market this week showed a pattern of "prices moving higher, raw material support, and demand under pressure." Although gains in finished product prices were capped by their struggle to rise, supported by stronger demand, firmer substitute raw materials, and cost-effectiveness advantages, stainless steel scrap prices are expected to remain generally stable with slight rise in the period ahead.

[SMM Stainless Steel Daily Review] SS Futures Struggled to Break Out of Rangebound Trading, Spot Market Held Prices Steady While Actively Shipping SMM News, March 13: SS futures remained in the doldrums. However, after opening higher in the night session, SS fluctuated downward, with the pace of pullback accelerating further in the afternoon, and closed at 14,190 yuan/mt. In the spot market, affected by fluctuations in futures, quotations were largely stable, with limited changes during the week. Although the recovery in downstream demand and cargo pick-up of previous orders provided support, and stainless steel social inventory stopped rising and pulled back this week, market expectations remained mediocre, with merchants mainly holding prices steady while actively making shipments. The most-traded SS futures contract fluctuated stronger. As of 10:15 a.m., SS2605 stood at 14,275 yuan/mt, down 15 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 245-445 yuan/mt. In the spot market, cold-rolled 201/2B coils in Wuxi were all basically stable; for cold-rolled trimmed 304/2B coils, the average prices in both Wuxi and Foshan were basically stable; cold-rolled 316L/2B coils in Wuxi were basically stable; hot-rolled 316L/NO.1 coils were quoted basically stable in Wuxi; and cold-rolled 430/2B coils in both Wuxi and Foshan were basically stable. Entering the traditional peak consumption season of “Golden March and Silver April,” the stainless steel market ushered in a window for demand recovery, with downstream end-users gradually recovering and inquiry and purchase activity having picked up notably recently. However, stainless steel spot prices overall remained basically stable, with no obvious fluctuations. End-user procurement mainly followed rigid demand, and a full-scale peak-season boom had yet to emerge, while wait-and-see sentiment still lingered in the market. On the futures side, affected by Yi...