[SMM Stainless Steel Daily Review] SS Futures Fell Back as Steel Mill Price Adjustments Dampened Downstream Buying Interest SMM News, March 16: SS futures showed a downward pullback. Although the contract was relatively stable during Friday's night session, Monday's open was dragged lower by a broad decline across the nonferrous metals sector, with SS also pulling back to close at 14,185 yuan/mt by midday. In the spot market, affected by the decline in SS futures and an overall cut of 200 yuan/mt in the morning guidance prices from a major stainless steel mill, retail quotations in the market edged lower. Price fluctuations fueled stronger wait-and-see sentiment among downstream buyers, and intraday transactions were weak. However, market feedback indicated that transactions had been broadly steady earlier, and coupled with relatively strong expectations for the cost side of stainless steel, most market participants had not expected this round of price cuts. Traders' spot quotations fell by less than the reduction in the guidance price. The most-traded SS futures contract pulled back after falling. As of 10:15 a.m., SS2605 was quoted at 14,045 yuan/mt, down 230 yuan/mt from the previous trading day. Spot premiums for Wuxi 304/2B were in the range of 245-445 yuan/mt. In the spot market, Wuxi cold-rolled 201/2B coils were generally stable; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi fell by 50 yuan/mt and the average price in Foshan fell by 50 yuan/mt; Wuxi cold-rolled 316L/2B coils were stable; Wuxi quotations for hot-rolled 316L/NO.1 coils were stable; cold-rolled 430/2B coils in both Wuxi and Foshan were also stable. As the traditional peak consumption season of "Golden March and Silver April" begins, the stainless steel market is entering a window for demand recovery, with downstream end-users gradually resu...

[SMM Daily Review: Cost Support Met Cooling Downstream Prices, Putting Pressure on High-Grade NPI Prices] March 16 News: SMM's upstream sentiment factor for high-grade NPI was 2.89, down 0.03 MoM, while the downstream sentiment factor for high-grade NPI was 1.63, down 0.09 MoM.

The 2026 SMM (3rd) Global Renewable Metal Industry Chain Summit & Battery Recycling Forum will be held in Tokyo, Japan, from May 11–12, 2026. The summit aims to bring together leading global enterprises, research institutions, industry experts, and policymakers in the fields of renewable metals and battery recycling.

[SMM Daily Chrome Commentary: Ore Prices Continued to Rise, While Ferrochrome Remained Temporarily Stable] March 16, 2026: Spot chrome ore prices continued to rise, while ferrochrome quotations saw no adjustment for the time being...

In early March 2026, Qatalum—the 648,000-tonne-per-year primary aluminum smelter in Qatar, a 50/50 joint venture between Norsk Hydro and Qatar Aluminum Manufacturing Company initiated a controlled shutdown of production. The decision, effective from March 3, followed a warning from gas supplier QatarEnergy that natural gas deliveries would be fully suspended due to disruptions linked to the ongoing U.S.-Israel-Iran conflict, including attacks on regional energy infrastructure.

According to the Fu'an City Development and Reform Bureau, as outlined in its 2026 economic and social development plan released on March 6, the city is set to continuously consolidate its leading advantage in the stainless steel new materials industry. A key focus for the year is accelerating the construction and implementation of major downstream projects, specifically highlighting Runhengxin's 600,000-ton stainless steel cold-rolling project and a new titanium alloy materials manufacturing industrial park. Through these strategic capacity expansions, Fu'an aims to push the total output value of its stainless steel new materials industry to 246 billion RMB in 2026, targeting a year-on-year growth rate of over 5%.

This week, ferrous metals rebounded from the bottom. At the start of the week, coking coal and coke led the futures higher, mainly driven by rising crude oil prices in the overseas market, which pushed the energy and chemicals sector stronger accordingly; mid-week, both the U.S. and Iran signaled a more relaxed stance toward war, easing geopolitical tensions, while coal prices fell in tandem, weakening the cost-side logic, and ferrous metals fluctuated at highs; in the latter half of the week, worsening short-term liquidity issues in BHP's iron ore port inventory triggered stronger iron ore prices in the overseas market, while the Middle East situation remained volatile, reinforcing cost support and pushing ferrous metals higher again. In the spot market, supported by futures, end-user and arbitrage purchase sentiment both improved WoW this week......

Secondary Zinc Oxide Production Fell in February, While Secondary Zinc Oxide Payables Remained Relatively Firm. What Trend Will Secondary Zinc Oxide Show in March?

This week, prices of 304 stainless steel scrap off-cuts in east China strengthened to 10,400-10,500 yuan/mt; prices of stainless steel scrap off-cuts of the same specification in Foshan also rose, with the price range at 10,000-10,300 yuan/mt. From the raw material cost perspective, the current cost of producing stainless steel entirely with stainless steel scrap was about 14,364.47 yuan/mt, while the cost of producing it entirely with high-grade NPI was 14,640.04 yuan/mt. This week, stainless steel scrap prices strengthened and moved higher, mainly driven by the combined effects of linkage with furnace charge prices, cost-effectiveness advantages, and demand support. Stainless steel finished product prices have remained generally stable recently and struggled to rise; however, high-grade NPI prices still held firm, and high-carbon ferrochrome prices also moved higher in tandem recently. Following the trend of other furnace charge materials, stainless steel scrap also showed an upward trend. Stainless steel planned production for March is expected to rise significantly, boosting procurement demand for stainless steel scrap; meanwhile, supported by nickel ore and chrome ore, the pattern of high-grade NPI and high-carbon ferrochrome prices holding up well is unlikely to change, further driving stainless steel scrap prices higher. In addition, although the cost-effectiveness advantage of stainless steel scrap over high-grade NPI has narrowed somewhat, it still retains a considerable advantage at present, providing strong support for stainless steel scrap prices and reinforcing bullish market sentiment. However, it should be noted that the current recovery in downstream demand remains limited, and stainless steel social inventory is at a relatively high level. Stainless steel mills are facing considerable shipment pressure, causing stainless steel finished product prices to meet resistance in moving higher and in turn placing some constraints on further gains in stainless steel scrap prices. Overall, the stainless steel scrap market this week showed a pattern of "prices moving higher, raw material support, and demand under pressure." Although gains in finished product prices were capped by their struggle to rise, supported by stronger demand, firmer substitute raw materials, and cost-effectiveness advantages, stainless steel scrap prices are expected to remain generally stable with slight rise in the period ahead.

Stainless steel spot prices were stable this week, but production costs rose somewhat, further squeezing stainless steel mills’ profit margins. Taking 304 cold-rolled products as an example, based on raw material prices on the day, the full-cost profit margin was -1.27% this week; calculated based on raw material inventory costs, it reached 2.21%. Nickel raw material cost side, high-grade NPI prices edged up further this week. Although a major stainless steel mill recently set relatively low procurement tender prices for high-grade NPI, strong nickel ore prices continued to provide solid cost support for NPI, traders showed strong willingness to hold prices firm, and the overall market remained bullish. Coupled with high stainless steel production schedules in March, downstream stainless steel mills maintained strong raw material demand, and the psychological price level also moved up gradually. In the short term, high-grade NPI prices were more likely to rise than fall. As of this Friday, high-grade NPI with a grade of 10-12% rose by 6.5 yuan per nickel unit to 1,094.5 yuan/nickel unit. Stainless steel scrap market side, stainless steel scrap prices strengthened this week, mainly due to the linkage with furnace charge, economic advantages, and demand support. Firm high-grade NPI and high-carbon ferrochrome prices boosted steel scrap prices higher. Stainless steel production schedules are expected to increase in March, boosting procurement demand. Stainless steel scrap still had an economic advantage over high-grade NPI, supporting bullish sentiment. However, downstream demand recovery remained limited, stainless steel social inventory stayed high, and finished product prices lacked momentum for further gains, constraining upside room for steel scrap prices. Overall, the market showed a pattern of “rising prices, raw material support, and demand under pressure,” and prices are expected to remain generally stable with slight rise going forward. As of this Friday, the price of 304 off-cuts in Shanghai rose by 600 yuan/mt to around 10,250 yuan/mt. Chrome raw material cost side, high-carbon ferrochrome prices rose slightly this week. Overseas market chrome ore futures prices continued to climb, and China chrome ore spot quotations moved up in tandem. Ferrochrome smelting costs increased, ferrochrome producers’ profits narrowed significantly, and with retail spot supply of high-carbon ferrochrome remaining tight and stainless steel production schedules staying high in March, ferrochrome prices were supported to edge up further. As of this Friday, high-carbon ferrochrome prices in Inner Mongolia rose 50 yuan/mt (50% metal content) WoW to 8,650 yuan/mt (50% metal content).