SMM March 13: This week, China’s domestic tungsten market exhibited high-level oscillations with intensified supply-demand competition. Multiple mines put products up for auction during the week, but transactions were bleak.As of March 13, tungsten prices remained largely stable, yet market sentiment became extremely divided.

Philippines Market: Tight Supply and Surging Freight Rates Supported Ore Prices to Fluctuate at Highs Philippine nickel ore prices rose sharply this week. In terms of prices, Philippine nickel ore CIF China quotes were $64-68/wmt for Ni 1.3% grade, $71-75/wmt for Ni 1.4% grade, and $78-82/wmt for Ni 1.5% grade, up $6 WoW. The average CIF price from the Philippines to Indonesia was $65.5/wmt for 1.3% grade and $72.5/wmt for 1.4% grade. Supply side, although the Philippines was transitioning into the dry season, mining hubs such as Surigao and Homonhon continued to see heavy rainfall due to a low-pressure area (LPA) east of Mindanao. Although Metro Manila and most parts of Luzon saw hot and sunny weather, the probability of rainfall exceeding 50 mm in Surigao and Caraga remained “very high.” Strong thunderstorms and scattered precipitation were expected to further intensify during March 9 to 13. Affected by the trough of the low-pressure area and the easterlies, persistent rainfall may continue to disrupt open-pit mining and vessel loading operations in southern regions. Market supply remained scarce. Driven by both supply tightness caused by cuts in Indonesia’s RKAB quotas and expected supply gaps, mainstream prices for Philippine nickel ore have surged recently. As of Friday, March 13, nickel ore inventory at Chinese ports stood at 5.23 million mt, down 500,000 mt WoW. Current total port inventory was equivalent to about 41,100 mt Ni in metal content. Demand side, China’s NPI prices rose this week, with spot transaction prices up about 1,089.9 yuan per nickel unit. As smelters had sufficient stockpiling earlier and showed limited acceptance of recently high-priced nickel ore, most were currently taking a wait-and-see stance. In terms of ocean freight rates, affected by a sharp jump in oil prices, nickel ore freight rates climbed, with the ocean freight rate from the Philippines to Lianyungang reaching $15/mt or above. Looking ahead, Philippine nickel ore prices are expected to continue fluctuating at highs. Indonesia Market: Under Weather Disruptions and RKAB Policy Clarification, Tight Supply Continued Indonesia's local nickel ore prices rose somewhat this week. Indonesia’s nickel ore benchmark price (HPM) for the first half of March was set at $17,104/dmt, down 3.21% MoM. According to SMM Indonesia nickel ore premium data, average premiums for 1.4%, 1.5%, and 1.6% grade laterite nickel ore were reported at $35, $39, and $39.5/wmt, respectively. Among them, the port arrivals under domestic trade price for 1.6% grade was $65.2-74.2/wmt. The simultaneous strengthening in premiums this month reflected both the release of smelters’ restocking demand and pessimistic expectations over RKAB quota cuts, while the delivered price of 1.2% grade limonite ore also edged up to $24-26/wmt. From the supply and demand fundamentals, as of March 13, Indonesia’s key nickel ore producing areas of Morowali, Konawe, and Halmahera were affected this week by strong thunderstorms and extremely high humidity of up to 94%. Weather continued to fluctuate, causing soil to become highly saturated and seriously hindering mine drying and transport operations. Morowali and Konawe will face a heavy rainfall system over the weekend with precipitation probability as high as 80%, while Halmahera, under high-humidity conditions, is expected to see rainfall intensity rebound again next Friday, with overall logistics capacity remaining constrained. At present, RKAB approvals for most small- and medium-sized mines remained pending. As existing quotas could no longer be used for next month’s production and sales, rising supply uncertainty was pushing nickel ore prices higher. Demand side, as some Indonesian smelters faced uncertainty over nickel ore resources and found it difficult to secure high-grade saprolite ore, nickel ore prices remained firm. To secure raw material supply, some smelters even raised trading bonuses. Overall, although the impact of the current MOMS system failure on mines had largely faded, overall nickel ore supply remained tight. Although spot supply of limonite ore was relatively sufficient, some related production lines were currently running at low load due to a tailings dam landslide accident at some MHP projects in an Indonesian industrial park, leading to temporary weakness in overall demand. However, considering concerns among some Indonesian smelters over RKAB approval uncertainty, raw material stockpiling demand from newly commissioned projects, and continued growth in demand from outer islands, limonite ore prices are expected to closely track saprolite ore and remain high. On the policy side, in response to recent market rumors that “production quotas (RKAB) will be uniformly supplemented by an additional 25%-30%,” Tri Winarno, Director General of Minerals and Coal at Indonesia’s Ministry of Energy and Mineral Resources (ESDM), clarified on March 3, 2026, that RKAB supplements would be based on individual assessments of enterprise production capacity and compliance, rather than a uniform proportional increase, and indicated that the approval process would start in H2 2026. Officials emphasized that this was a routine regulatory process for resource optimization, rather than a passive countermeasure to the previous output cap policy. Looking ahead, affected by the relatively slow progress of RKAB approvals, nickel ore prices are expected to remain more likely to rise than fall in April.

[SMM Morning Comment on Cast Aluminum Alloy: Alloy Prices Continued to Hover at Highs, While Market Demand Was Significantly Suppressed] This week, secondary aluminum alloy prices continued to rise, but the pace of demand follow-up was relatively slow. In the short term, raw material costs remained at high levels, providing strong support for ADC12 prices; however, if prices continue to rise, the suppressive effect of high prices on demand will become increasingly evident. Meanwhile, as operating rates gradually recover, there are also expectations of a mild increase on the supply side. ADC12 prices are expected to fluctuate at highs in the short term. Going forward, it is recommended to focus on the pace of downstream order release, the pressure on the market from the supply recovery process, and the impact of the Middle East situation on aluminum prices.

[SMM Silicone Weekly Review: Downstream Procurement Sentiment in the Silicone Market Remained Cautious, and New Order Transactions Were Relatively Weak] After completing the price increase last week, quoted prices generally remained stable this week, but actual market transactions were relatively weak. Cost side, affected by geopolitical developments, raw material methanol prices held up well, which also provided some support for silicone DMC prices. However, subsequent impacts and changes still require close attention to the extent of raw material price fluctuations and the duration of their effects.

[Spot Silicon Metal Prices Probe Higher as Market Transactions Remain Stagnant; Polysilicon Price Trend Declines]: On the supply side, production release from silicon metal capacity that resumed production in early March increased total silicon metal supply compared with early March. Recently, there have been scattered production resumptions in Southwest China, but these have not yet become widespread, so their impact on supply growth has been very limited. On the cost side, spot prices of silicon coal and electrodes have remained temporarily stable recently, while petroleum coke prices rose slightly. Coupled with higher gasoline prices, road transport freight rates were raised slightly, providing relatively strong cost support for silicon metal. On the demand side, performance has mainly remained stable recently. During the week, spot silicon metal transactions were stagnant, inventory in the intermediate segment stayed at a high level, and downstream demand was weak, so silicon metal prices had limited room to rise or fall and were mainly range-bound in consolidation.

This week, Pr-Nd alloy prices generally fell first and then rose, and have now stabilized in the range of 980,000-1 million yuan/mt. This price fluctuation was mainly driven by the impact of news factors on market sentiment.

[SMM Analysis: Weak End-User Demand but Firm Costs, High-Grade NPI Prices Rose Steadily] The average SMM 10-12% high-grade NPI price rose 2.2 yuan/nickel unit WoW to 1,089.9 yuan/nickel unit (ex-factory, tax included), while the average Indonesian NPI FOB index price increased $0.39/nickel unit WoW to $138.93/nickel unit. This week, mainstream steel mills released tender prices, and the market came under brief pressure.

[SMM Titanium Weekly Review: Titanium Dioxide Showed Signs of Recovery; Diverging Strength Across the Titanium Industry Chain Market This Week] This week, the titanium industry chain in China showed pronounced structural divergence, with the tug-of-war between sellers and buyers across upstream and downstream segments intensifying and cost pass-through facing obstacles. Overall, the sector was characterized by a combination of weak recovery and localized strong support. Trading in upstream titanium ore and titanium slag was sluggish. Downstream processing enterprises tightly controlled costs, with procurement consistently maintained at a pace driven by rigid demand. Coupled with inventory at high levels across the industry, the raw material end remained under pressure, enterprises’ willingness to operate stayed weak, capacity release was constrained, and the supply-demand imbalance continued to stand out. In the midstream titanium dioxide segment, pressure from elevated costs of raw materials and energy sharply increased production-side strain. Enterprises held prices firm and showed a strong willingness to sell, and while domestic trade demand did not see a noticeable increase in volume—relying only on rigid-demand support—overseas markets still demonstrated a certain degree of resilience, leaving the overall market running relatively strong. The downstream sponge titanium and titanium products segments performed impressively: sponge titanium inventories remained low, and, together with robust downstream restocking demand, top-tier enterprises proactively adjusted prices, with enterprises showing strong confidence in holding prices firm. The titanium products market saw stable supply and demand: the supply-side operating rate was steady, while demand-side differentiation was evident. Civilian applications were mainly driven by rigid-demand restocking, while orders in high-end fields such as aerospace and military industries were steady. The market recovered steadily, and differences in the pace across segments of the industry chain also set the tone for subsequent market dynamics.

In contrast to the typical price declines seen during the traditional spring festival low season from January to February in previous years, China’s domestic manganese sulfate market has recently staged an independent rally of “strong performance amid the off-season”, with prices rising steadily along the way.

Stainless steel spot prices were stable this week, but production costs rose somewhat, further squeezing stainless steel mills’ profit margins. Taking 304 cold-rolled products as an example, based on raw material prices on the day, the full-cost profit margin was -1.27% this week; calculated based on raw material inventory costs, it reached 2.21%. Nickel raw material cost side, high-grade NPI prices edged up further this week. Although a major stainless steel mill recently set relatively low procurement tender prices for high-grade NPI, strong nickel ore prices continued to provide solid cost support for NPI, traders showed strong willingness to hold prices firm, and the overall market remained bullish. Coupled with high stainless steel production schedules in March, downstream stainless steel mills maintained strong raw material demand, and the psychological price level also moved up gradually. In the short term, high-grade NPI prices were more likely to rise than fall. As of this Friday, high-grade NPI with a grade of 10-12% rose by 6.5 yuan per nickel unit to 1,094.5 yuan/nickel unit. Stainless steel scrap market side, stainless steel scrap prices strengthened this week, mainly due to the linkage with furnace charge, economic advantages, and demand support. Firm high-grade NPI and high-carbon ferrochrome prices boosted steel scrap prices higher. Stainless steel production schedules are expected to increase in March, boosting procurement demand. Stainless steel scrap still had an economic advantage over high-grade NPI, supporting bullish sentiment. However, downstream demand recovery remained limited, stainless steel social inventory stayed high, and finished product prices lacked momentum for further gains, constraining upside room for steel scrap prices. Overall, the market showed a pattern of “rising prices, raw material support, and demand under pressure,” and prices are expected to remain generally stable with slight rise going forward. As of this Friday, the price of 304 off-cuts in Shanghai rose by 600 yuan/mt to around 10,250 yuan/mt. Chrome raw material cost side, high-carbon ferrochrome prices rose slightly this week. Overseas market chrome ore futures prices continued to climb, and China chrome ore spot quotations moved up in tandem. Ferrochrome smelting costs increased, ferrochrome producers’ profits narrowed significantly, and with retail spot supply of high-carbon ferrochrome remaining tight and stainless steel production schedules staying high in March, ferrochrome prices were supported to edge up further. As of this Friday, high-carbon ferrochrome prices in Inner Mongolia rose 50 yuan/mt (50% metal content) WoW to 8,650 yuan/mt (50% metal content).