Intermediate Product Nickel Market Trading Was Sluggish, Awaiting Guidance From Papua New Guinea Tender Results

As of now, the FOB price of Indonesian MHP nickel was $15,418/mt Ni in metal content, and the FOB price of Indonesian MHP cobalt was $49,918/mt Co. MHP payables (against the SMM battery-grade nickel sulphate index) were 85.5-86.5, and the payable indicator for MHP cobalt element (against SMM refined cobalt (Rotterdam warehouse)) was 91. The FOB price of Indonesian high-grade nickel matte was $15,777/mt Ni in metal content.

After the Lantern Festival, brass billet enterprises basically fully resumed work and production, driving the industry operating rate this week (2.27-3.5) up 26.1 percentage points MoM to 43.23%. However, overall market performance remained cautious. As downstream sectors such as hardware and sanitary ware resumed work and production slowly, new orders were limited, leading to weak stockpiling sentiment among enterprises. This week, days of raw material inventories at sampled enterprises only held at a mid-to-low level of 4.29 days, while days of finished product inventories were 5.19 days, also at a mid-level. This reflected that the industry was still in a wait-and-see phase amid destocking, with overall trading activity average. Looking ahead to next week (3.6-3.12), as the traditional peak consumption season approaches and downstream further resumes work, new orders are expected to increase gradually. SMM expected the operating rate to rise 2.69 percentage points MoM to 45.92%, and market activity was expected to improve.

[Downstream Held Some Raw Material Inventory; Trading Remained Weak During the Week]: This week, spot discounts in Ningbo widened, while the weekly average price was basically flat WoW. As of this Friday, spot prices in Ningbo against the 2604 contract were at a discount of 70 yuan/mt, and a premium of 30 yuan/mt against Shanghai. The premium against Shanghai fluctuated during the week.

This week, ferrous metals held up well within a narrow range. Over the weekend, turmoil in the Middle East and the escalation of the U.S.-Iran conflict triggered wild swings in the international energy market, sending energy and precious metals sharply higher, while ferrous metals—except coking coal and coke—mostly retreated after rapid rise following the open; mid-week, although there were bullish expectations around the Two Sessions, no new news emerged, the steel market remained relatively stable, and the pattern of raw materials outperforming finished steel products continued; in the latter half of the week, the Two Sessions’ macro conclusions met expectations, but had already been priced in by futures earlier, and high-level fluctuations in international oil prices continued to support raw materials, in turn pushing ferrous metals to edge higher on a steady footing. In the spot market, in the second week after the holiday, the market gradually resumed work and resumed production, but with insufficient momentum from futures, overall willingness to purchase was not high, and transactions were mainly concluded at low prices......

SMM News, March 6: This week, LME lead opened at around $1,962.0/mt. In early trading, amid a tug-of-war between longs and shorts, it saw wide swings around $1,966/mt, hitting a high of $1,981.5/mt. As overseas geopolitical risks intensified, base metals broadly fell during the European session, and the center of LME lead moved down to around $1,943.5/mt, once dipping to the weekly low of $1,927/mt. Sentiment then recovered, and lead prices fluctuated upward but struggled to rebound, failing to break through resistance. It weakened again toward the close and finally settled at $1,948.5/mt, down $11/mt from the start of the week, a decline of about 0.56%. This week, the most-traded SHFE lead contract opened at around 16,805 yuan/mt. Boosted by geopolitical factors, broad gains in the base metals sector drove lead prices to strengthen amid fluctuations, reaching a high of 17,020 yuan/mt. Subsequently, affected by weak supply and demand in the spot market, prices lacked support and pulled back amid fluctuations, dipping to 16,710 yuan/mt. Mid-week, it fluctuated rangebound around the daily moving average. It rebounded slightly toward the close but remained at low levels overall, finally settling at around 16,775 yuan/mt, down about 65 yuan/mt WoW, a decline of about 0.39%. > Subscribe to view SMM historical spot metal prices

DCE iron ore held up well today and dropped back slightly before the close. The most-traded contract, I2605, finally closed at 772 yuan/mt, up 1.38% from the previous trading session. The spot price rose 10-15 yuan from the previous trading day. Traders were moderately active in quoting, while steel mills made fewer inquiries. Spot trading sentiment was subdued. According to SMM statistics, total iron ore inventory at 35 major ports nationwide stood at 154.8 million mt, down 590,000 mt MoM, indicating a slight destocking trend. Over the same period, the daily average port pick-up volume rebounded to 2.55 million mt, up 145,000 mt MoM, suggesting a faster pace of port shipments. Demand improved slightly. The core logic supporting iron ore prices is gradually shifting from macro demand to structural contradictions on the supply side. Market concerns over structural shortages of certain mainstream mid- to high-grade ore types are fermenting, and these expectations have strengthened bullish sentiment, providing solid bottom support for prices. Looking ahead, the market is expected to see a tug-of-war between supply and demand in the short term. On the one hand, based on the production schedule, enforcement of blast furnace maintenance is expected to strengthen next week, which will create a phased restraint on immediate iron ore consumption. Against this backdrop of weaker demand, the aforementioned structural tightness on the supply side may be temporarily less apparent. However, once this round of concentrated maintenance ends and blast furnaces resume production as planned, iron ore demand is set to warm up in the short term. Driven by a rebound in demand, the structural shortage contradiction on the supply side will quickly stand out as the market’s main trading logic, and iron ore prices are expected to, overall, hold up well at that time.

[Geopolitical Tensions Disrupted the Market, With SHFE and LME Closing Lower Over the Week] At the beginning of the week, continued overseas destocking supported a higher center for LME zinc; subsequently, as geopolitical tensions fueled inflation concerns, a stronger US dollar pressured the base metals sector, and LME zinc retreated after rapid rise, with its center moving lower......

[French Lithium Company Launches Geothermal Well Testing at the Schwabwiller Site in Alsace] The first geothermal exploration well drilled by the French lithium company at the Schwabwiller site in the Grand Ried department of Alsace, France, has begun well testing. This phase will last 3–5 weeks and is intended to verify the resource’s potential for geothermal heating and lithium production. Drilling at the Schwabwiller site began in November 2025, with a target depth of approximately 2,400 meters. The project is expected to drill a pair of wells, with a bottom-hole spacing of about 1,000 meters. The drilling campaign is expected to take a total of seven months. If results are positive, the French lithium company’s project is expected to provide geothermal heating for enterprises, farms, and local communities in northern Alsace. In addition, extracting lithium from geothermal brine will produce lithium with a lower environmental footprint, with carbon dioxide emissions reduced by about 70% compared with lithium currently on the market. Source: https://www.thinkgeoenergy.com/ [Li-FT Power Strategic Assessment of the Yellowknife Lithium Carbonate Conversion Plant Project] The global lithium chemicals supply chain is at a crossroads, with traditional production models facing unprecedented pressure from accelerating electrification demand. The market landscape is increasingly tilting toward integrated producers, which can capture value across the full chain—from raw ore mining to refining and producing battery-grade lithium chemicals. This shift reflects a broader strategic realignment across the industry: enterprises are enhancing operational resilience through vertical integration rather than relying on fragmented commodity supply chains. Li-FT Power’s recently announced Yellowknife lithium carbonate conversion plant project is a representative case of this strategic evolution. The proposed facility targets annual production of 30,000 mt LCE, positioning the company within North America’s emerging battery materials ecosystem. This capacity scale reflects an intentional mid-end positioning, balancing capital efficiency with meaningful market participation. Source: https://discoveryalert.com.au/ [Zimbabwe Clarifies Why It Hastily Banned Exports of Some of Its Most Critical Minerals] Recently, Zimbabwe’s Minister of Mines, Polit Kambamura, reiterated this rationale, stating that miners’ under-reporting of declared volumes constitutes a serious problem that cannot be ignored. He noted that the issue has become so widespread that the government was forced to bring forward the disciplinary timetable by one year. The government had originally planned to begin imposing an export ban on lithium concentrates next year, but due to rising production and newly issued export permits, it moved to launch the ban as quickly as possible. At a press conference after a Cabinet meeting in the country’s capital, Harare, Kambamura told reporters: “The ban will remain in effect until the conditions proposed by the government or new expectations are met.” Source: https://africa.businessinsider.com/ [Rock Tech and Siemens Plan to Build a Lithium Converter in Canada] The lithium converter that Rock Tech Lithium is developing in Guben, eastern Germany, is intended to serve as a blueprint for building a similar facility in Canada in cooperation with Siemens. The project will use Siemens’ digital twin technology to digitally replicate, optimize, and scale up the plant’s design and operating processes. The lithium converter that Rock Tech is currently building in Guben, Germany, is designed for an annual output of 24,000 mt of battery-grade lithium hydroxide. The company said this will become the largest facility of its kind in Europe. It is expected to start operations in 2027. The target capacity is equivalent to about 30 Gwh of battery capacity, sufficient to meet demand for about 500,000 EV units per year. Rock Tech also plans to build a similar facility in Red Rock, Ontario, Canada. Siemens AG’s technology will be deployed for the plant’s construction and operations. The two companies have signed a non-binding memorandum of understanding to establish a long-term, multi-phase strategic partnership focused on developing modern lithium converter capacity. Source: https://www.electrive.com/

SMM News on March 5: The most-traded SHFE lead 2604 contract opened at 16,775 yuan/mt today. After a slight pull back in early trading, it fluctuated rangebound around 16,825 yuan/mt, with the tug-of-war between longs and shorts relatively stalemated. During the session, lead prices quickly dipped, and although they rebounded slightly toward the close, the overall center gradually moved lower. It eventually closed at a low of 16,770 yuan/mt, forming a doji, down about 65 yuan from the previous trading day’s settlement price, a decline of about 0.39%. Secondary lead smelters postponed resuming production to mid-to-late March due to poor profitability. After the holiday, scrap collection by recyclers remained tight, and raw material shortages at smelters provided cost support. Downstream battery producers mainly focused on digesting pre-holiday inventory, making small-lot purchases for rigid demand. The dual weakness in supply and demand in the lead market continued, and lead price fluctuations are expected to be limited in the short term. Data Source Statement: Except for public information, all other data are processed by SMM based on public information, market communication, and SMM’s internal database models, and are for reference only and do not constitute decision-making advice.