Philippines Market: Tight Supply and Surging Freight Rates Supported Ore Prices to Fluctuate at Highs Philippine nickel ore prices rose sharply this week. In terms of prices, Philippine nickel ore CIF China quotes were $64-68/wmt for Ni 1.3% grade, $71-75/wmt for Ni 1.4% grade, and $78-82/wmt for Ni 1.5% grade, up $6 WoW. The average CIF price from the Philippines to Indonesia was $65.5/wmt for 1.3% grade and $72.5/wmt for 1.4% grade. Supply side, although the Philippines was transitioning into the dry season, mining hubs such as Surigao and Homonhon continued to see heavy rainfall due to a low-pressure area (LPA) east of Mindanao. Although Metro Manila and most parts of Luzon saw hot and sunny weather, the probability of rainfall exceeding 50 mm in Surigao and Caraga remained “very high.” Strong thunderstorms and scattered precipitation were expected to further intensify during March 9 to 13. Affected by the trough of the low-pressure area and the easterlies, persistent rainfall may continue to disrupt open-pit mining and vessel loading operations in southern regions. Market supply remained scarce. Driven by both supply tightness caused by cuts in Indonesia’s RKAB quotas and expected supply gaps, mainstream prices for Philippine nickel ore have surged recently. As of Friday, March 13, nickel ore inventory at Chinese ports stood at 5.23 million mt, down 500,000 mt WoW. Current total port inventory was equivalent to about 41,100 mt Ni in metal content. Demand side, China’s NPI prices rose this week, with spot transaction prices up about 1,089.9 yuan per nickel unit. As smelters had sufficient stockpiling earlier and showed limited acceptance of recently high-priced nickel ore, most were currently taking a wait-and-see stance. In terms of ocean freight rates, affected by a sharp jump in oil prices, nickel ore freight rates climbed, with the ocean freight rate from the Philippines to Lianyungang reaching $15/mt or above. Looking ahead, Philippine nickel ore prices are expected to continue fluctuating at highs. Indonesia Market: Under Weather Disruptions and RKAB Policy Clarification, Tight Supply Continued Indonesia's local nickel ore prices rose somewhat this week. Indonesia’s nickel ore benchmark price (HPM) for the first half of March was set at $17,104/dmt, down 3.21% MoM. According to SMM Indonesia nickel ore premium data, average premiums for 1.4%, 1.5%, and 1.6% grade laterite nickel ore were reported at $35, $39, and $39.5/wmt, respectively. Among them, the port arrivals under domestic trade price for 1.6% grade was $65.2-74.2/wmt. The simultaneous strengthening in premiums this month reflected both the release of smelters’ restocking demand and pessimistic expectations over RKAB quota cuts, while the delivered price of 1.2% grade limonite ore also edged up to $24-26/wmt. From the supply and demand fundamentals, as of March 13, Indonesia’s key nickel ore producing areas of Morowali, Konawe, and Halmahera were affected this week by strong thunderstorms and extremely high humidity of up to 94%. Weather continued to fluctuate, causing soil to become highly saturated and seriously hindering mine drying and transport operations. Morowali and Konawe will face a heavy rainfall system over the weekend with precipitation probability as high as 80%, while Halmahera, under high-humidity conditions, is expected to see rainfall intensity rebound again next Friday, with overall logistics capacity remaining constrained. At present, RKAB approvals for most small- and medium-sized mines remained pending. As existing quotas could no longer be used for next month’s production and sales, rising supply uncertainty was pushing nickel ore prices higher. Demand side, as some Indonesian smelters faced uncertainty over nickel ore resources and found it difficult to secure high-grade saprolite ore, nickel ore prices remained firm. To secure raw material supply, some smelters even raised trading bonuses. Overall, although the impact of the current MOMS system failure on mines had largely faded, overall nickel ore supply remained tight. Although spot supply of limonite ore was relatively sufficient, some related production lines were currently running at low load due to a tailings dam landslide accident at some MHP projects in an Indonesian industrial park, leading to temporary weakness in overall demand. However, considering concerns among some Indonesian smelters over RKAB approval uncertainty, raw material stockpiling demand from newly commissioned projects, and continued growth in demand from outer islands, limonite ore prices are expected to closely track saprolite ore and remain high. On the policy side, in response to recent market rumors that “production quotas (RKAB) will be uniformly supplemented by an additional 25%-30%,” Tri Winarno, Director General of Minerals and Coal at Indonesia’s Ministry of Energy and Mineral Resources (ESDM), clarified on March 3, 2026, that RKAB supplements would be based on individual assessments of enterprise production capacity and compliance, rather than a uniform proportional increase, and indicated that the approval process would start in H2 2026. Officials emphasized that this was a routine regulatory process for resource optimization, rather than a passive countermeasure to the previous output cap policy. Looking ahead, affected by the relatively slow progress of RKAB approvals, nickel ore prices are expected to remain more likely to rise than fall in April.

On March 13, the average price of SMM battery-grade nickel sulphate rose slightly.

SMM March 13: This week, China’s domestic tungsten market exhibited high-level oscillations with intensified supply-demand competition. Multiple mines put products up for auction during the week, but transactions were bleak.As of March 13, tungsten prices remained largely stable, yet market sentiment became extremely divided.

[SMM Analysis: Weak End-User Demand but Firm Costs, High-Grade NPI Prices Rose Steadily] The average SMM 10-12% high-grade NPI price rose 2.2 yuan/nickel unit WoW to 1,089.9 yuan/nickel unit (ex-factory, tax included), while the average Indonesian NPI FOB index price increased $0.39/nickel unit WoW to $138.93/nickel unit. This week, mainstream steel mills released tender prices, and the market came under brief pressure.

According to SMM data, during the week of March 9–13, 2026 , China’s stainless steel market moved into the middle phase of the traditional peak-demand season known as “Golden March,” while trading in the most-active stainless steel futures contract rolled smoothly into SS2605 . Against a backdrop of escalating geopolitical tensions and a visible turn in inventory trends, stainless steel futures continued to trade at relatively elevated levels. As of 10:15 a.m. on March 13 , the contract stood at RMB 14,275/mt (about USD 2,068/mt) , up RMB 40/mt (about USD 5.80/mt) from the previous Friday’s close. This week’s key market tension remained the mismatch between rising supply and only a modest recovery in demand. Although fundamentals have yet to show strong upward momentum, geopolitical risk premiums and persistently high raw material costs have kept downside pressure limited, preventing a broader correction from taking shape. Macro backdrop: geopolitics abroad, policy support in China At the macro level, external black swan risks and policy support in China have created a clear contrast. Iran reiterated that it would maintain the effective closure of the Strait of Hormuz, reinforcing safe-haven demand and pushing the US dollar index higher. That, in turn, capped upside in dollar-denominated base metals. Meanwhile, US core CPI rose 2.5% year on year in February , in line with expectations, easing immediate inflation concerns. Even so, the market remains wary of a potential surge in energy prices in March. In China, the Ministry of Finance has signaled that fiscal policy in 2026 will remain more proactive, with RMB 100 billion (about USD 14.49 billion) allocated to strengthen coordination between fiscal and financial policy, particularly in support of household consumption and private-sector investment. That measured policy support has helped improve expectations for a broader recovery in commodity demand. Inventory draw emerges, but spot demand remains cautious On the fundamentals side, the stainless market has finally reached a meaningful inflection point in destocking, although spot trading still appears underwhelming. The latest SMM data shows that social inventories fell to 998,100 mt this week from 1,016,400 mt the previous week, a decline of 18,300 mt , taking inventories back below the psychologically important 1 million mt threshold. As downstream processing plants gradually resumed operations, demand continued to recover. However, while spot transactions improved from earlier levels, trading activity still fell short of the strength typically associated with the seasonal peak. End-users have largely remained focused on buying only what they need, with little appetite for active restocking. At present, the supply increase resulting from concentrated mill restarts in March is meeting only a slow improvement in end-use demand. That still-fragile recovery continues to limit market confidence in any stronger upside breakout during the peak season. Raw material costs remain the key floor Raw material costs continued to trend higher and remain the market’s main source of downside support. With geopolitical tensions lingering and tight ore supply from Indonesia continuing to feed through the market, upstream quotations kept rising. As of March 13 , high-grade NPI moved up further to RMB 1,094.5 per nickel unit (about USD 158.61 per nickel unit) , up RMB 6.5 (about USD 0.94) from a week earlier. High-carbon ferrochrome also climbed to RMB 8,650 per 50-basis mt (about USD 1,253.50 per 50-basis mt) . As raw material prices continue to move higher, stainless mills’ production cost floors are also rising. Although downstream buyers remain resistant to expensive material, room for mills to offer discounts has narrowed sharply under the pressure of high costs and, in some cases, negative margins. As a result, cost support for both futures and spot prices has become increasingly firm. Outlook: high-level consolidation likely to continue Overall, the stainless steel market is now caught in a complex tug-of-war defined by rising supply, only a weak recovery in demand, firm cost support, and a clear turn in inventories. The safe-haven and inflation-hedging logic stemming from the Strait of Hormuz crisis, together with NPI prices approaching the 1,100 threshold, has effectively limited downside in the futures market. At the same time, subdued spot order activity has capped upside momentum. Looking ahead to next week, the market will be watching closely to see whether the destocking trend can continue. The main focus will shift to actual arrivals following mill restarts and the pace at which downstream orders improve. In the near term, the most-active stainless steel futures contract is expected to remain rangebound at relatively high levels. Market participants are advised to closely monitor geopolitical developments and nickel ore price movements, as both could trigger sudden directional swings. Written by: Bruce Chew | bruce.chew@smm.cn +601167087088

Stainless steel spot prices were stable this week, but production costs rose somewhat, further squeezing stainless steel mills’ profit margins. Taking 304 cold-rolled products as an example, based on raw material prices on the day, the full-cost profit margin was -1.27% this week; calculated based on raw material inventory costs, it reached 2.21%. Nickel raw material cost side, high-grade NPI prices edged up further this week. Although a major stainless steel mill recently set relatively low procurement tender prices for high-grade NPI, strong nickel ore prices continued to provide solid cost support for NPI, traders showed strong willingness to hold prices firm, and the overall market remained bullish. Coupled with high stainless steel production schedules in March, downstream stainless steel mills maintained strong raw material demand, and the psychological price level also moved up gradually. In the short term, high-grade NPI prices were more likely to rise than fall. As of this Friday, high-grade NPI with a grade of 10-12% rose by 6.5 yuan per nickel unit to 1,094.5 yuan/nickel unit. Stainless steel scrap market side, stainless steel scrap prices strengthened this week, mainly due to the linkage with furnace charge, economic advantages, and demand support. Firm high-grade NPI and high-carbon ferrochrome prices boosted steel scrap prices higher. Stainless steel production schedules are expected to increase in March, boosting procurement demand. Stainless steel scrap still had an economic advantage over high-grade NPI, supporting bullish sentiment. However, downstream demand recovery remained limited, stainless steel social inventory stayed high, and finished product prices lacked momentum for further gains, constraining upside room for steel scrap prices. Overall, the market showed a pattern of “rising prices, raw material support, and demand under pressure,” and prices are expected to remain generally stable with slight rise going forward. As of this Friday, the price of 304 off-cuts in Shanghai rose by 600 yuan/mt to around 10,250 yuan/mt. Chrome raw material cost side, high-carbon ferrochrome prices rose slightly this week. Overseas market chrome ore futures prices continued to climb, and China chrome ore spot quotations moved up in tandem. Ferrochrome smelting costs increased, ferrochrome producers’ profits narrowed significantly, and with retail spot supply of high-carbon ferrochrome remaining tight and stainless steel production schedules staying high in March, ferrochrome prices were supported to edge up further. As of this Friday, high-carbon ferrochrome prices in Inner Mongolia rose 50 yuan/mt (50% metal content) WoW to 8,650 yuan/mt (50% metal content).

March 13 News: Northern ports: South African high-grade ore, 32.5-35.4 yuan/mtu, prices up WoW from last Friday; South African semi-carbonate, 38.9-39.4 yuan/mtu, prices up WoW from last Friday; Gabon ore, 44.3-44.9 yuan/mtu, prices up WoW from last Friday; 46% Australian lumps, 44.9-45.4 yuan/mtu, prices up WoW from last Friday. South China ports: South African high-grade ore, 33-33.5 yuan/mtu, prices flat WoW from last Friday; South African semi-carbonate, 35.9-36.4 yuan/mtu, prices up WoW from last Friday; Gabon ore, 42-42.5 yuan/mtu, prices flat WoW from last Friday; 46% Australian lumps, 43.4-43.9 yuan/mtu, prices flat WoW from last Friday.

Among them, the Gulf region was an important consumer market for China in the Middle East: China’s exports of aluminum plate/sheet and strip to Saudi Arabia reached 42,500 mt, and aluminum foil 58,000 mt; exports of aluminum plate/sheet and strip to the UAE reached 103,500 mt, and aluminum foil 93,800 mt; the other four countries (Bahrain, Qatar, Kuwait, and Oman) accounted for combined exports of about 22,000 mt of aluminum plate/sheet and strip and about 11,000 mt of aluminum foil.

This week, the center of nickel prices moved lower WoW, with the most-traded SHFE nickel contract fluctuating within 132,000-140,000 yuan/mt. Early in the week, it fell below the 135,000 yuan mark amid weaker macro sentiment, but in the latter part of the week, rumors of maintenance at HPAL projects provided strong support around 133,000 yuan, and prices eventually returned to fluctuate around 137,000 yuan/mt. As of Friday's close, the most-traded SHFE nickel contract rose 0.14% WoW, while LME nickel gained 0.06% WoW. In the spot market, the average SMM #1 refined nickel price was 140,510 yuan/mt this week, up 850 yuan/mt WoW. The average premium for Jinchuan nickel was 6,800 yuan/mt this week, down 100 yuan/mt WoW, while premiums for mainstream electrodeposited nickel brands in China ranged from -300 to 400 yuan/mt. Overall spot transactions were mediocre this week. On the macro front, geopolitical risks escalated markedly this week. In his first statement after taking office, Iran's new supreme leader said the Strait of Hormuz would remain closed and that a new front would be opened if necessary. US ADP employment increased by 63,000 in February, above market expectations. As a result, the US dollar index strengthened लगातार, putting pressure on non-ferrous metal prices. Pan Gongsheng, governor of China's central bank, said the next step would be to build a scientific and prudent monetary policy framework, continue to effectively implement a moderately accommodative monetary policy, and strengthen counter-cyclical and cross-cyclical adjustments. Inventory side, inventory in the Shanghai Bonded Zone was about 2,200 mt this week, flat WoW. China's social inventory was about 87,000 mt, with an inventory buildup of about 3,000 mt WoW. In Indonesia's Morowali region, some HPAL plants cut production due to tailings accidents. Meanwhile, tensions in the Middle East raised the risk of sulfur supply disruptions, and the market expected future MHP intermediate product supply to be tight, with strong willingness to hold prices firm, which would provide some cost support for nickel prices. However, the area above 140,000 yuan/mt still faced strong resistance from high inventory and weak demand. The core trading range for the most-traded SHFE nickel contract next week is expected to be 135,000-145,000 yuan/mt.

[Supply Disruptions Persist, Imported TCs Continued to Decline]: Weekly data showed that the average weekly TC of SMM Zn50 domestic ore was unchanged at 1,550 yuan/mt in metal content, and the SMM imported zinc concentrate index fell $4.13/dmt MoM to $11.25/dmt...