Philippines Market: Tight Supply and Surging Freight Rates Supported Ore Prices to Fluctuate at Highs Philippine nickel ore prices rose sharply this week. In terms of prices, Philippine nickel ore CIF China quotes were $64-68/wmt for Ni 1.3% grade, $71-75/wmt for Ni 1.4% grade, and $78-82/wmt for Ni 1.5% grade, up $6 WoW. The average CIF price from the Philippines to Indonesia was $65.5/wmt for 1.3% grade and $72.5/wmt for 1.4% grade. Supply side, although the Philippines was transitioning into the dry season, mining hubs such as Surigao and Homonhon continued to see heavy rainfall due to a low-pressure area (LPA) east of Mindanao. Although Metro Manila and most parts of Luzon saw hot and sunny weather, the probability of rainfall exceeding 50 mm in Surigao and Caraga remained “very high.” Strong thunderstorms and scattered precipitation were expected to further intensify during March 9 to 13. Affected by the trough of the low-pressure area and the easterlies, persistent rainfall may continue to disrupt open-pit mining and vessel loading operations in southern regions. Market supply remained scarce. Driven by both supply tightness caused by cuts in Indonesia’s RKAB quotas and expected supply gaps, mainstream prices for Philippine nickel ore have surged recently. As of Friday, March 13, nickel ore inventory at Chinese ports stood at 5.23 million mt, down 500,000 mt WoW. Current total port inventory was equivalent to about 41,100 mt Ni in metal content. Demand side, China’s NPI prices rose this week, with spot transaction prices up about 1,089.9 yuan per nickel unit. As smelters had sufficient stockpiling earlier and showed limited acceptance of recently high-priced nickel ore, most were currently taking a wait-and-see stance. In terms of ocean freight rates, affected by a sharp jump in oil prices, nickel ore freight rates climbed, with the ocean freight rate from the Philippines to Lianyungang reaching $15/mt or above. Looking ahead, Philippine nickel ore prices are expected to continue fluctuating at highs. Indonesia Market: Under Weather Disruptions and RKAB Policy Clarification, Tight Supply Continued Indonesia's local nickel ore prices rose somewhat this week. Indonesia’s nickel ore benchmark price (HPM) for the first half of March was set at $17,104/dmt, down 3.21% MoM. According to SMM Indonesia nickel ore premium data, average premiums for 1.4%, 1.5%, and 1.6% grade laterite nickel ore were reported at $35, $39, and $39.5/wmt, respectively. Among them, the port arrivals under domestic trade price for 1.6% grade was $65.2-74.2/wmt. The simultaneous strengthening in premiums this month reflected both the release of smelters’ restocking demand and pessimistic expectations over RKAB quota cuts, while the delivered price of 1.2% grade limonite ore also edged up to $24-26/wmt. From the supply and demand fundamentals, as of March 13, Indonesia’s key nickel ore producing areas of Morowali, Konawe, and Halmahera were affected this week by strong thunderstorms and extremely high humidity of up to 94%. Weather continued to fluctuate, causing soil to become highly saturated and seriously hindering mine drying and transport operations. Morowali and Konawe will face a heavy rainfall system over the weekend with precipitation probability as high as 80%, while Halmahera, under high-humidity conditions, is expected to see rainfall intensity rebound again next Friday, with overall logistics capacity remaining constrained. At present, RKAB approvals for most small- and medium-sized mines remained pending. As existing quotas could no longer be used for next month’s production and sales, rising supply uncertainty was pushing nickel ore prices higher. Demand side, as some Indonesian smelters faced uncertainty over nickel ore resources and found it difficult to secure high-grade saprolite ore, nickel ore prices remained firm. To secure raw material supply, some smelters even raised trading bonuses. Overall, although the impact of the current MOMS system failure on mines had largely faded, overall nickel ore supply remained tight. Although spot supply of limonite ore was relatively sufficient, some related production lines were currently running at low load due to a tailings dam landslide accident at some MHP projects in an Indonesian industrial park, leading to temporary weakness in overall demand. However, considering concerns among some Indonesian smelters over RKAB approval uncertainty, raw material stockpiling demand from newly commissioned projects, and continued growth in demand from outer islands, limonite ore prices are expected to closely track saprolite ore and remain high. On the policy side, in response to recent market rumors that “production quotas (RKAB) will be uniformly supplemented by an additional 25%-30%,” Tri Winarno, Director General of Minerals and Coal at Indonesia’s Ministry of Energy and Mineral Resources (ESDM), clarified on March 3, 2026, that RKAB supplements would be based on individual assessments of enterprise production capacity and compliance, rather than a uniform proportional increase, and indicated that the approval process would start in H2 2026. Officials emphasized that this was a routine regulatory process for resource optimization, rather than a passive countermeasure to the previous output cap policy. Looking ahead, affected by the relatively slow progress of RKAB approvals, nickel ore prices are expected to remain more likely to rise than fall in April.

This week, Pr-Nd alloy prices generally fell first and then rose, and have now stabilized in the range of 980,000-1 million yuan/mt. This price fluctuation was mainly driven by the impact of news factors on market sentiment.

SMM March 13: This week, China’s domestic tungsten market exhibited high-level oscillations with intensified supply-demand competition. Multiple mines put products up for auction during the week, but transactions were bleak.As of March 13, tungsten prices remained largely stable, yet market sentiment became extremely divided.

Gold surged during the 12-day war with Iran last year and then gave up its gains when a ceasefire was announced. But, two weeks into the latest conflict, its price remains largely unmoved.

This week, ferrous metals rebounded from the bottom. At the start of the week, coking coal and coke led the futures higher, mainly driven by rising crude oil prices in the overseas market, which pushed the energy and chemicals sector stronger accordingly; mid-week, both the U.S. and Iran signaled a more relaxed stance toward war, easing geopolitical tensions, while coal prices fell in tandem, weakening the cost-side logic, and ferrous metals fluctuated at highs; in the latter half of the week, worsening short-term liquidity issues in BHP's iron ore port inventory triggered stronger iron ore prices in the overseas market, while the Middle East situation remained volatile, reinforcing cost support and pushing ferrous metals higher again. In the spot market, supported by futures, end-user and arbitrage purchase sentiment both improved WoW this week......

Stainless steel spot prices were stable this week, but production costs rose somewhat, further squeezing stainless steel mills’ profit margins. Taking 304 cold-rolled products as an example, based on raw material prices on the day, the full-cost profit margin was -1.27% this week; calculated based on raw material inventory costs, it reached 2.21%. Nickel raw material cost side, high-grade NPI prices edged up further this week. Although a major stainless steel mill recently set relatively low procurement tender prices for high-grade NPI, strong nickel ore prices continued to provide solid cost support for NPI, traders showed strong willingness to hold prices firm, and the overall market remained bullish. Coupled with high stainless steel production schedules in March, downstream stainless steel mills maintained strong raw material demand, and the psychological price level also moved up gradually. In the short term, high-grade NPI prices were more likely to rise than fall. As of this Friday, high-grade NPI with a grade of 10-12% rose by 6.5 yuan per nickel unit to 1,094.5 yuan/nickel unit. Stainless steel scrap market side, stainless steel scrap prices strengthened this week, mainly due to the linkage with furnace charge, economic advantages, and demand support. Firm high-grade NPI and high-carbon ferrochrome prices boosted steel scrap prices higher. Stainless steel production schedules are expected to increase in March, boosting procurement demand. Stainless steel scrap still had an economic advantage over high-grade NPI, supporting bullish sentiment. However, downstream demand recovery remained limited, stainless steel social inventory stayed high, and finished product prices lacked momentum for further gains, constraining upside room for steel scrap prices. Overall, the market showed a pattern of “rising prices, raw material support, and demand under pressure,” and prices are expected to remain generally stable with slight rise going forward. As of this Friday, the price of 304 off-cuts in Shanghai rose by 600 yuan/mt to around 10,250 yuan/mt. Chrome raw material cost side, high-carbon ferrochrome prices rose slightly this week. Overseas market chrome ore futures prices continued to climb, and China chrome ore spot quotations moved up in tandem. Ferrochrome smelting costs increased, ferrochrome producers’ profits narrowed significantly, and with retail spot supply of high-carbon ferrochrome remaining tight and stainless steel production schedules staying high in March, ferrochrome prices were supported to edge up further. As of this Friday, high-carbon ferrochrome prices in Inner Mongolia rose 50 yuan/mt (50% metal content) WoW to 8,650 yuan/mt (50% metal content).

SMM News, March 6: This week, LME lead opened at $1,940/mt. Early in the session, affected by the rapid fading of geopolitical safe-haven sentiment and broad weakness across the nonferrous metals sector, lead prices fluctuated downward and once fell to $1,927.5/mt. Subsequently, market sentiment somewhat recovered, and lead prices fluctuated upward, touching a high of $1,949/mt. As bullish momentum weakened, prices turned weaker again and finally closed at $1,933/mt, down $13/mt from the beginning of the week, a decline of about 0.67%. This week, the most-traded SHFE lead contract opened at around 16,780 yuan/mt, and early-session lead prices climbed to 16,815 yuan/mt. Subsequently, affected by both weak supply and weak demand in the spot market, prices fluctuated downward. During the session, lead prices rebounded slightly, but bearish strength remained strong, and the price center moved lower again. Near the close, after consolidating at lows, lead prices fell to 16,550 yuan/mt and finally closed at 16,555 yuan/mt, down about 220 yuan/mt from the beginning of the week, a decline of about 1.31%. 》Subscribe to View Historical SMM Metal Spot Prices

[Supply Disruptions Persist, Imported TCs Continued to Decline]: Weekly data showed that the average weekly TC of SMM Zn50 domestic ore was unchanged at 1,550 yuan/mt in metal content, and the SMM imported zinc concentrate index fell $4.13/dmt MoM to $11.25/dmt...

[SMM Analysis: Weak End-User Demand but Firm Costs, High-Grade NPI Prices Rose Steadily] The average SMM 10-12% high-grade NPI price rose 2.2 yuan/nickel unit WoW to 1,089.9 yuan/nickel unit (ex-factory, tax included), while the average Indonesian NPI FOB index price increased $0.39/nickel unit WoW to $138.93/nickel unit. This week, mainstream steel mills released tender prices, and the market came under brief pressure.

Among precious and rare metals, osmium is a niche yet irreplaceable material, overshadowed by gold, silver, platinum and palladium but critical for high-end industry and scientific research thanks to its unique physical and chemical properties. This report breaks down osmium’s core attributes, supply, applications and market traits to unveil the “densest natural metal”. I. Basic Profile: A Distinct Platinum Group Metal Osmium (Os, atomic number 76) is a Group Ⅷ transition metal and part of the platinum group metals (PGMs), extremely scarce in nature. It has no independent deposits, only extracted and purified via platinum ore smelting alongside platinum, iridium, ruthenium, rhodium and palladium, ruling out large-scale standalone mining. Its standout properties: unmatched density (22.59g/cm³ at 20℃, higher than gold and platinum), exceptional heat resistance (melting point 3033℃, boiling point over 5000℃), and high hardness & corrosion resistance (Mohs hardness 7). It is highly brittle with poor plasticity, mostly used in powder or alloy forms. Key Safety Warning: Osmium oxidizes to toxic, volatile osmium tetroxide (OsO₄) when heated above 100℃ in air. Full-process operations (smelting, storage, transport, processing) require inert gas protection, raising production and application thresholds. II. Supply Landscape: Extreme Scarcity & Monopolized Output Osmium is far rarer than gold and platinum, with a crustal abundance of just 0.001ppm, one of the lowest stable elements globally. Proven recoverable reserves are extremely limited and highly concentrated. Global output hinges entirely on platinum mining and smelting, staying at a tiny scale: annual global production is roughly 1 ton (data from International Platinum Group Metals Association), while China’s annual output is less than 100kg. South Africa and Russia dominate global osmium resources and smelting capacity, forming a highly monopolized, inelastic supply market. Tight supply-demand balance persists, supporting strong price resilience and volatility. III. Core Applications: High-End & Irreplaceable Scenarios Despite low production and narrow application scope, osmium is a rigid material for high-precision sectors with no low-cost substitutes, focusing on four key fields: Special Hard Alloys: Osmium-based alloys excel in hardness, wear and corrosion resistance, used for high-precision bearings (luxury watches, instruments), premium pen nibs, medical scalpels and high-end mechanical wear parts. Industrial Catalysis: Osmium and its compounds act as high-efficiency catalysts for fine chemical and organic synthesis (hydrogenation, oxidation), boosting process efficiency and product purity with stable low-volume demand. Scientific Research: Toxic osmium tetroxide is an irreplaceable stain for electron microscopy samples in materials and life sciences; high-purity osmium powder serves as a specialty lab consumable. Aerospace & Military: Leveraging high density and thermal stability, osmium is used for specialty high-temperature components, precision guidance parts and high-end electrical contacts, with high added value and growing demand amid industrial upgrading. IV. Core Market Traits Osmium is a niche PGM marked by extreme resource scarcity, monopolized inelastic supply, rigid high-end demand and total irreplaceability. Unlike bulk commodities, its market is driven by supply shifts, high-end industrial demand and compliance costs, with a small scale and low trading frequency, remaining a critical material for high-end industry and scientific research.