Stainless steel spot prices were stable this week, but production costs rose somewhat, further squeezing stainless steel mills’ profit margins. Taking 304 cold-rolled products as an example, based on raw material prices on the day, the full-cost profit margin was -1.27% this week; calculated based on raw material inventory costs, it reached 2.21%. Nickel raw material cost side, high-grade NPI prices edged up further this week. Although a major stainless steel mill recently set relatively low procurement tender prices for high-grade NPI, strong nickel ore prices continued to provide solid cost support for NPI, traders showed strong willingness to hold prices firm, and the overall market remained bullish. Coupled with high stainless steel production schedules in March, downstream stainless steel mills maintained strong raw material demand, and the psychological price level also moved up gradually. In the short term, high-grade NPI prices were more likely to rise than fall. As of this Friday, high-grade NPI with a grade of 10-12% rose by 6.5 yuan per nickel unit to 1,094.5 yuan/nickel unit. Stainless steel scrap market side, stainless steel scrap prices strengthened this week, mainly due to the linkage with furnace charge, economic advantages, and demand support. Firm high-grade NPI and high-carbon ferrochrome prices boosted steel scrap prices higher. Stainless steel production schedules are expected to increase in March, boosting procurement demand. Stainless steel scrap still had an economic advantage over high-grade NPI, supporting bullish sentiment. However, downstream demand recovery remained limited, stainless steel social inventory stayed high, and finished product prices lacked momentum for further gains, constraining upside room for steel scrap prices. Overall, the market showed a pattern of “rising prices, raw material support, and demand under pressure,” and prices are expected to remain generally stable with slight rise going forward. As of this Friday, the price of 304 off-cuts in Shanghai rose by 600 yuan/mt to around 10,250 yuan/mt. Chrome raw material cost side, high-carbon ferrochrome prices rose slightly this week. Overseas market chrome ore futures prices continued to climb, and China chrome ore spot quotations moved up in tandem. Ferrochrome smelting costs increased, ferrochrome producers’ profits narrowed significantly, and with retail spot supply of high-carbon ferrochrome remaining tight and stainless steel production schedules staying high in March, ferrochrome prices were supported to edge up further. As of this Friday, high-carbon ferrochrome prices in Inner Mongolia rose 50 yuan/mt (50% metal content) WoW to 8,650 yuan/mt (50% metal content).

This week, prices of 304 stainless steel scrap off-cuts in east China strengthened to 10,400-10,500 yuan/mt; prices of stainless steel scrap off-cuts of the same specification in Foshan also rose, with the price range at 10,000-10,300 yuan/mt. From the raw material cost perspective, the current cost of producing stainless steel entirely with stainless steel scrap was about 14,364.47 yuan/mt, while the cost of producing it entirely with high-grade NPI was 14,640.04 yuan/mt. This week, stainless steel scrap prices strengthened and moved higher, mainly driven by the combined effects of linkage with furnace charge prices, cost-effectiveness advantages, and demand support. Stainless steel finished product prices have remained generally stable recently and struggled to rise; however, high-grade NPI prices still held firm, and high-carbon ferrochrome prices also moved higher in tandem recently. Following the trend of other furnace charge materials, stainless steel scrap also showed an upward trend. Stainless steel planned production for March is expected to rise significantly, boosting procurement demand for stainless steel scrap; meanwhile, supported by nickel ore and chrome ore, the pattern of high-grade NPI and high-carbon ferrochrome prices holding up well is unlikely to change, further driving stainless steel scrap prices higher. In addition, although the cost-effectiveness advantage of stainless steel scrap over high-grade NPI has narrowed somewhat, it still retains a considerable advantage at present, providing strong support for stainless steel scrap prices and reinforcing bullish market sentiment. However, it should be noted that the current recovery in downstream demand remains limited, and stainless steel social inventory is at a relatively high level. Stainless steel mills are facing considerable shipment pressure, causing stainless steel finished product prices to meet resistance in moving higher and in turn placing some constraints on further gains in stainless steel scrap prices. Overall, the stainless steel scrap market this week showed a pattern of "prices moving higher, raw material support, and demand under pressure." Although gains in finished product prices were capped by their struggle to rise, supported by stronger demand, firmer substitute raw materials, and cost-effectiveness advantages, stainless steel scrap prices are expected to remain generally stable with slight rise in the period ahead.

[SMM Stainless Steel Daily Review] SS Futures Struggled to Break Out of Rangebound Trading, Spot Market Held Prices Steady While Actively Shipping SMM News, March 13: SS futures remained in the doldrums. However, after opening higher in the night session, SS fluctuated downward, with the pace of pullback accelerating further in the afternoon, and closed at 14,190 yuan/mt. In the spot market, affected by fluctuations in futures, quotations were largely stable, with limited changes during the week. Although the recovery in downstream demand and cargo pick-up of previous orders provided support, and stainless steel social inventory stopped rising and pulled back this week, market expectations remained mediocre, with merchants mainly holding prices steady while actively making shipments. The most-traded SS futures contract fluctuated stronger. As of 10:15 a.m., SS2605 stood at 14,275 yuan/mt, down 15 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 245-445 yuan/mt. In the spot market, cold-rolled 201/2B coils in Wuxi were all basically stable; for cold-rolled trimmed 304/2B coils, the average prices in both Wuxi and Foshan were basically stable; cold-rolled 316L/2B coils in Wuxi were basically stable; hot-rolled 316L/NO.1 coils were quoted basically stable in Wuxi; and cold-rolled 430/2B coils in both Wuxi and Foshan were basically stable. Entering the traditional peak consumption season of “Golden March and Silver April,” the stainless steel market ushered in a window for demand recovery, with downstream end-users gradually recovering and inquiry and purchase activity having picked up notably recently. However, stainless steel spot prices overall remained basically stable, with no obvious fluctuations. End-user procurement mainly followed rigid demand, and a full-scale peak-season boom had yet to emerge, while wait-and-see sentiment still lingered in the market. On the futures side, affected by Yi...

[SMM Nickel Flash] March 13 News: Supply side, as rising ore prices provided strong cost support, upstream offer prices remained firm. Demand side, as market activity gradually rebounded, steel mills' indicative prices also saw some increases. Overall, market trading activity gradually recovered, and high-grade NPI prices were supported.

The Indian Stainless Steel Development Association (ISSDA) has recently urged the government to permanently remove customs duties on imported scrap and ferroalloys, and to classify chromium as a critical mineral, in order to support the country’s planned expansion of stainless steel capacity from 7 million mt to 11 million mt. At the same time, ISSDA has also called for stronger measures to address the impact of low-priced Chinese products, warning that some Chinese material may be entering India through third countries such as Vietnam, thereby bypassing existing trade protection measures. These statements suggest that the Indian stainless steel industry is no longer simply asking for “growth support.” Instead, it has entered a more complex phase, where it wants to accelerate capacity expansion while also defending itself against external competition. Capacity Expansion Is Clear, and India’s Stainless Steel Industry Has Entered a Critical Phase At first glance, these may look like two conflicting policy demands. On the one hand, the industry wants lower import duties on raw materials to reduce production costs. On the other hand, it is asking the government to tighten import restrictions and strengthen trade protection. But when viewed within the broader industry cycle that India’s stainless steel sector is currently going through, these two demands are not contradictory. They are simply two sides of the same expansion cycle. For domestic stainless steel producers in India, the most important goal over the next few years is to build up local supply capacity while domestic demand is still growing. ISSDA has previously estimated that stainless steel demand in India will continue to grow by 7%–8% annually over the next two to three years. Against this backdrop, the industry wants to keep raw material costs as low as possible during the expansion phase, while also preventing low-priced imported finished products from eroding returns before local capacity expansion is complete. In other words, what worries India’s stainless steel industry most right now is not the absence of market demand, but the possibility that demand exists while the gains from expansion are undermined by imports. That is why ISSDA is simultaneously calling for the permanent removal of duties on scrap and ferroalloy imports, while also highlighting the threat posed by low-priced Chinese products. In the industry’s view, lower tariffs on raw materials would improve the competitiveness of domestic manufacturing, while stronger protection on finished products would buy time for local investment, expansion, and capacity ramp-up. This policy logic of “opening the upstream while defending the downstream” is, in essence, a typical industrial development strategy. Raw Material Security Has Become the Core Condition Behind Expansion This also reflects the industry’s growing concern over raw material supply. Scrap and ferroalloys are key inputs for stainless steel production, while chromium is a critical element in the stainless alloy system. ISSDA’s specific call to classify chromium as a critical mineral shows that its focus is no longer limited to short-term price issues, but has shifted toward medium- to long-term resource security. India has long been the world’s largest importer of stainless steel scrap. Data shows that its stainless scrap imports rose to 1.58 million mt in 2025, up significantly from 2024, further underscoring India’s continued reliance on overseas scrap supply. For a country aiming to expand stainless steel capacity from 7 million mt to 11 million mt, whether the raw material supply system can scale up in parallel will directly determine whether that expansion can actually be delivered. If import costs for scrap and ferroalloys remain high, or if chromium supply security proves insufficient, then even the most ambitious capacity plans could face rising costs, margin pressure, or slower project execution in practice. From the industry’s perspective, therefore, removing duties on imported raw materials and strengthening critical mineral management are not isolated policy demands. They are essential supporting measures for the broader expansion target. India’s stainless steel industry wants to secure the raw material base first before further releasing capacity, reflecting a deeper concern for supply chain completeness and long-term sustainability. Demand Continues to Grow, but Cheap External Supply Creates Real Pressure On the demand side, India is still seen as one of the most important growth markets for stainless steel consumption globally. With the development of manufacturing, continued infrastructure investment, and upgrading in end-use consumption, India’s stainless steel demand is expected to maintain relatively strong growth, providing a solid foundation for capacity expansion. The challenge, however, is that demand growth does not automatically mean domestic producers will benefit. If most of the incremental demand is captured by imported material, India may see consumption expand without domestic industry benefiting to the same extent. In this context, ISSDA’s concerns over Chinese oversupply spilling into India become particularly sensitive. According to media reports, ISSDA believes China has more than 8 million mt of excess stainless steel melting capacity, and that this material is seeking overseas outlets, with India standing out as one of the most attractive target markets. The reason is straightforward. On the one hand, India is itself a growth market. On the other hand, its domestic supply system is still in the process of expanding and has not yet built an unshakable market barrier, making it more exposed to external supply pressure. For Indian mills, this pressure is not only reflected in price competition, but also in investment expectations. When an industry is in the middle of an expansion phase, companies need a relatively predictable margin environment to support new investments, depreciation costs, and capacity ramp-up. If large volumes of low-priced imports continue to flow in during this period, domestic producers may struggle to convert rising demand into actual returns. The Risk of Rerouted Trade Is One of India’s Bigger Concerns Another important point in ISSDA’s latest statement is the issue of rerouted trade. The association warned that some Chinese steel products may be entering India through third countries such as Vietnam, thereby bypassing existing trade protection measures. This concern is easy to understand. In recent years, amid ongoing global trade friction and stricter origin management, practices such as third-country rerouting, supply chain detours, and origin restructuring have come under increasing scrutiny. For India, this means that even if trade protection measures exist on paper, actual import pressure may not disappear in practice. In other words, what truly concerns the industry is not simply whether tariffs or barriers exist, but whether these measures can actually work as intended. If external supply can continue entering India through more complex trade routes, then the competitive pressure facing domestic producers will not ease in any meaningful way, weakening the real impact of policy protection. India’s Core Objective Is to Turn Demand Advantage Into Industrial Advantage At a deeper level, India’s stainless steel industry is moving from a stage of demand-driven growth to one of broader industrial competition. In the past, discussion of India’s stainless steel market often focused on its consumption growth potential, including its large population base, urbanization, and manufacturing upgrade. But as consumption continues to expand, the question is no longer simply whether demand will grow, but who will ultimately capture that growth. If domestic demand keeps rising while most of the incremental market is filled by imports, India may become a major consumption market without necessarily becoming a true manufacturing powerhouse. What ISSDA is now pushing for is, in effect, the key step needed to turn India’s demand advantage into industrial advantage. That is why the industry is asking the government to lower upstream raw material costs while at the same time strengthening trade defense at the finished-product end. The underlying logic is not simply to reject imports, but to create a more supportive environment for domestic manufacturing to grow and attract investment. The Direction of Future Policy Is Worth Watching Viewed within the broader competitive landscape of the Asian stainless steel market, India’s position is actually becoming quite clear. It does not want to remain merely a consumption market. It wants to become a more complete domestic manufacturing center. That means its policy stance is likely to continue along a dual-track approach: more openness toward key raw materials, and greater caution toward finished-product imports. For the market, there are several developments worth watching. First, whether India will further reduce import duties on scrap and ferroalloys on a long-term basis, or even establish a more stable policy framework for raw material support. Second, whether chromium will be formally included in the country’s critical mineral system, thereby strengthening resource security. Third, whether India will step up anti-dumping, anti-circumvention, and origin-related scrutiny, especially against third-country rerouting paths. If these directions gradually materialize, they could reshape competition in India’s stainless steel market, alter its import structure, and even change broader resource flows across Asia. Conclusion Overall, ISSDA’s latest public stance does not simply signal another trade friction issue. It reflects the broader priorities of India’s stainless steel industry as it enters a new stage: securing raw material supply and cost competitiveness for expansion, while also preventing low-priced external supply from undermining domestic industry during a critical window. Whether India’s stainless steel story can evolve from one of consumption growth into one of manufacturing rise may depend not only on the pace of demand growth itself, but also on whether the government can build a policy mix that effectively balances resources, tariffs, and trade protection in a way that genuinely supports domestic industrial upgrading. Written by: Bruce Chew | bruce.chew@metal.com +601167087088

This week, ferrous metals rebounded from the bottom. At the start of the week, coking coal and coke led the futures higher, mainly driven by rising crude oil prices in the overseas market, which pushed the energy and chemicals sector stronger accordingly; mid-week, both the U.S. and Iran signaled a more relaxed stance toward war, easing geopolitical tensions, while coal prices fell in tandem, weakening the cost-side logic, and ferrous metals fluctuated at highs; in the latter half of the week, worsening short-term liquidity issues in BHP's iron ore port inventory triggered stronger iron ore prices in the overseas market, while the Middle East situation remained volatile, reinforcing cost support and pushing ferrous metals higher again. In the spot market, supported by futures, end-user and arbitrage purchase sentiment both improved WoW this week......

[SMM Daily Brief Review of Coking Coal and Coke] In terms of supply, costs edged down slightly, coke producers' profits improved somewhat, and the overall operating rate remained moderate. However, downstream purchasing sentiment was average, the shipment pace of some coke producers slowed down, and inventory pressure persisted to some extent. On the demand side, steel mills' profitability did not improve significantly, and the procurement pace of some steel mills slowed down, with purchase as needed remaining the main approach for coke. Overall, the coke market may remain temporarily stable next week, and expectations for price cuts have temporarily dissipated.

According to SMM research, as of the 12th of March, total iron ore inventories across the 10 major ports surveyed stood at 118.99 million tonnes, an increase of 1.08 million tonnes compared to the previous week. Within this total, inventories of coarse fines and lump ore saw a marginal decrease, while stocks of concentrate and pellets continued to accumulate.

[SMM Analysis: Weak End-User Demand but Firm Costs, High-Grade NPI Prices Rose Steadily] The average SMM 10-12% high-grade NPI price rose 2.2 yuan/nickel unit WoW to 1,089.9 yuan/nickel unit (ex-factory, tax included), while the average Indonesian NPI FOB index price increased $0.39/nickel unit WoW to $138.93/nickel unit. This week, mainstream steel mills released tender prices, and the market came under brief pressure.

[SMM Steel] India’s Jindal Steel secured the Rengalaberha North-East Extension and Nuagan West iron ore block in Odisha through a state auction, offering a 111.15% premium over the base price. The mine is estimated to hold around 38 million tonnes of reserves, including about 29 mt of high-grade iron ore with Fe content near 60%, while the overall average grade is 57.87% Fe.