This week, prices of 304 stainless steel scrap off-cuts in east China strengthened to 10,200-10,300 yuan/mt; stainless steel scrap off-cuts of the same grade in Foshan rose, with a price range of 9,900-10,200 yuan/mt. From the perspective of raw material-side production costs, the current cost of producing stainless steel entirely with stainless steel scrap was about 14,127.63 yuan/mt, while the production cost using only high-grade NPI was 14,789.63 yuan/mt. This week, stainless steel scrap prices strengthened and moved higher, mainly supported by the recovery in restarts, catch-up demand, and cost advantages. Entering March, the market fully resumed operations, yard shipments accelerated, and downstream inquiries and transactions increased significantly, lifting trading activity and laying the groundwork for prices to rise. On the futures and raw material side, SS futures saw a pause in gains this week, stainless steel spot prices posted limited increases, the pace of high-grade NPI price hikes slowed, and heat in the raw material market cooled. However, stainless steel scrap had previously been affected by the Chinese New Year holiday, and prices failed to keep pace; this week’s catch-up rally became the key driver of the price strength. In terms of supporting factors, stainless steel mills’ March production schedules rose sharply, boosting stainless steel scrap procurement demand; coupled with expectations for the “Golden March and Silver April” peak season, bullish sentiment was strong. Meanwhile, stainless steel scrap’s economic advantages over high-grade NPI were evident, lifting substitution demand and further supporting prices. However, downstream end-use demand recovered slowly, and stainless steel finished product inventory remained high, suppressing upward movement in finished product prices and transmitting to the stainless steel scrap market, thereby limiting the increase. Overall, the market this week showed a pattern of “restart recovery, increased transactions, and a catch-up price rise.” In the short term, there was still upward momentum, but gains were limited; over the longer term, attention should be paid to the pace of end-use demand recovery.

Nickel prices came under pressure and pulled back this week. Early in the week, rumors of tighter approvals for RKAB on the Indonesian ore side spurred the futures market to rally briefly, but it later retreated as US Fed officials repeatedly delivered hawkish remarks, the US dollar index held above 106, and global risk assets came under broad pressure. With tensions in the Middle East rising, macro risk-off sentiment strengthened, and nickel prices on SHFE and LME corrected notably. The most-traded SHFE nickel contract closed at 137,140 yuan/mt on Friday, down 1.6% on the week. The LME nickel 3M contract fluctuated between $17,000-17,900/mt this week, with a weekly decline of 2%. In the spot market, the weekly average price of SMM #1 refined nickel was 140,600 yuan/mt, down 2,150 yuan/mt WoW. The weekly average Jinchuan nickel premium was 6,900 yuan/mt, down 1,100 yuan/mt versus the week before Chinese New Year. Premiums for mainstream domestic brands of electrodeposited nickel ranged from -400-400 yuan/mt. After nickel prices fell this week, downstream restocking driven by rigid demand became more evident, and overall spot nickel plate shipments increased WoW. On the macro front, US ADP employment in February increased by 63,000, the largest rise since November 2025 and above the market expectation of 50,000, weakening expectations for US Fed interest rate cuts. Meanwhile, US January PCE and core PCE inflation data rose above expectations, and the US dollar index rebounded, creating short-term pressure on base metal prices. Geopolitical tensions continued to escalate this week, with Iran announcing the closure of the Strait of Hormuz, posing a potential threat to the sulfur supply chain. Domestically, the Two Sessions emphasized medium and long-term benefits from national defense spending, improving expectations for alloy demand in sectors such as defense industry and shipbuilding, which supported nickel alloy consumption. Inventory: Shanghai Bonded Zone inventory was about 2,200 mt this week, flat WoW. Domestic social inventory was about 85,000 mt, with an inventory buildup of about 8,000 mt WoW. Nickel prices are currently in a stalemate, with firmer cost support but unchanged near-term pressure. Tighter Indonesian RKAB quotas and tight nickel ore supply provided strong support for nickel prices, but levels above 140,000 yuan/mt faced strong resistance from high inventory and weak demand. The core expected trading range for the most-traded SHFE nickel contract next week is 130,000-140,000 yuan/mt.

Intermediate Product Nickel Market Trading Was Sluggish, Awaiting Guidance From Papua New Guinea Tender Results

[SMM Cast Aluminum Alloy Morning Comment: Overseas ADC12 Prices Surged to USD 3,200, with Import Losses Expanding Sharply] In the overnight session, the aluminum alloy 2604 contract in the night session moved downwards after a higher opening and fluctuated downward. After opening at 23,295 yuan/mt, it rose to 23,420 yuan/mt, then continued to pull back, dipping to a low of 23,000 yuan/mt, and closed at 23,170 yuan/mt in late trading, down 1.07% from the previous close. Open interest continued to decline, with bulls clearly reducing positions; trading volume edged up, and the price center moved lower.

This week, ferrous metals held up well within a narrow range. Over the weekend, turmoil in the Middle East and the escalation of the U.S.-Iran conflict triggered wild swings in the international energy market, sending energy and precious metals sharply higher, while ferrous metals—except coking coal and coke—mostly retreated after rapid rise following the open; mid-week, although there were bullish expectations around the Two Sessions, no new news emerged, the steel market remained relatively stable, and the pattern of raw materials outperforming finished steel products continued; in the latter half of the week, the Two Sessions’ macro conclusions met expectations, but had already been priced in by futures earlier, and high-level fluctuations in international oil prices continued to support raw materials, in turn pushing ferrous metals to edge higher on a steady footing. In the spot market, in the second week after the holiday, the market gradually resumed work and resumed production, but with insufficient momentum from futures, overall willingness to purchase was not high, and transactions were mainly concluded at low prices......

SMM Nickel News, March 6: Macro and Market Updates: (1) The central bank announced that, to keep liquidity in the banking system ample, on March 6, 2026, the People’s Bank of China will conduct 800 billion yuan outright reverse repo operations via fixed-amount, interest-rate tender with multiple-price allotment. The tenor will be three months (91 days). (2) Amir Heydari, deputy commander of Iran’s Khatam al-Anbiya Central Headquarters, said in an interview on the morning of the 5th local time that Iran had not actually closed the Strait of Hormuz. In a statement, the Islamic Revolutionary Guard Corps said that military and commercial vessels belonging to the US, Israel, and European countries and their supporters are strictly prohibited from transiting the waters; once discovered, they will be struck. Spot Market: On March 6, SMM #1 refined nickel prices rose by 150 yuan/mt from the previous trading day. For spot premiums, the average for Jinchuan #1 refined nickel was 6,750 yuan/mt, up 100 yuan/mt from the previous trading day; the range for domestically mainstream brands of electrodeposited nickel was -400-400 yuan/mt. Futures Market: The most-traded SHFE nickel contract (2605) opened lower and then fluctuated upward, closing the morning session at 137,580 yuan/mt, up 0.65%. A rebound in the US dollar index put pressure on nonferrous metal prices. In the short term, nickel prices are expected to maintain a fluctuate upward trend, and the most-traded SHFE nickel contract may trade in the 135,000-143,000 yuan/mt range.

[SMM Daily Review: End-Use Consumption Recovery Remained Limited, High-Grade Supply Scarcity Was Significant] News on March 6: The upstream sentiment factor for SMM high-grade NPI was 2.88, up 0.01 MoM, and the downstream sentiment factor for high-grade NPI was 1.37, up 0.05 MoM.

SMM News on March 6: This week, secondary lead premiums showed clear regional divergence, with parity prevailing overall, and most suppliers refusing to ship at a discount; only some cargoes in South China and Central China were offered at a discount of 100-50 yuan/mt against the SMM #1 lead average price. In terms of profits, scrap battery prices stayed firm, making it difficult for smelters to reduce costs, and industry losses continued. As of March 6, 2026, the theoretical comprehensive profit/loss for large-scale enterprises was -330 yuan/mt, and -543 yuan/mt for small and medium-sized enterprises (by-product revenue in the model excluded tin and antimony). Looking into next week, SMM expected supply tightness in raw materials to persist, leading the secondary lead operating rate to maintain its downward trend; under loss pressure, suppliers were likely to narrow discounts or keep parity offers, while downstream battery producers still made just-in-time procurement on a wait-and-see basis, resulting in relatively light market transactions. 》Subscribe to view SMM metal spot historical prices

As of now, the FOB price of Indonesian MHP nickel was $15,418/mt Ni in metal content, and the FOB price of Indonesian MHP cobalt was $49,918/mt Co. MHP payables (against the SMM battery-grade nickel sulphate index) were 85.5-86.5, and the payable indicator for MHP cobalt element (against SMM refined cobalt (Rotterdam warehouse)) was 91. The FOB price of Indonesian high-grade nickel matte was $15,777/mt Ni in metal content.

[SMM Analysis]Macro Factors Drove, and Supply and Demand Gradually Recovered,ADC12 Prices Were Expected to Rise in March