The gold price is currently causing nervousness once again. Since the start of the war involving the USA and Israel against Iran, the precious metal has recorded a daily loss of 4% for the second time.

“Gold’s status as a haven may now be tarnished in the eyes of some as the precious metal is falling in price even as war roils the Middle East and financial markets alike, and some may even be tempted to say that the third major bull run in the commodity since 1971 is now over,” says AJ Bell investment director Russ Mould.

Silver prices fell sharply today, and spot market premium quotations varied widely. Suppliers generally held back sales and stayed on the sidelines, while some smelters cut prices to sell off cargoes. In the Shanghai market, during early trading, mainstream quotations from suppliers of national-standard silver ingots were quoted at premiums of 150-200 yuan/kg against TD, but transactions were difficult. Some suppliers lowered premiums against TD to 100-120 yuan/kg, with only a small amount of rigid-demand transactions concluded. Spot cargo circulating in the market was relatively sufficient, and cargoes self-picked up from production site from smelters were sold off at premiums of 50-100 yuan/kg against TD or quoted at a premium of 50 yuan/kg against the SHFE silver 2606 contract. Downstream consumption weakened, and most downstream enterprises purchased cautiously for fear of further price declines, resulting in sluggish silver ingot transactions during the day.

SMM, March 23: Last Friday, LME lead opened at $1,893/mt. In early trading, prices consolidated within the range of $1,882–1,895/mt, and briefly dipped to $1,880/mt intraday. Bulls then stepped in, driving prices sharply higher to a high of $1,908/mt. After consolidating at high levels, bullish momentum weakened somewhat, and LME lead turned into a fluctuating downward trend. LME lead prices saw wide swings within the range of $1,888–1,898/mt, and finally closed at $1,889/mt. It posted a small bearish candlestick, down $8/mt, or 0.42%. Last Friday night, the most-traded SHFE lead 2605 contract opened higher with a gap at 16,360 yuan/mt. In early trading, SHFE lead prices fell rapidly, hitting a low of 16,325 yuan/mt. SHFE lead then fluctuated upward, but failed to break through resistance, and lead prices fluctuated downward again. After 22:30, prices gradually stabilized and rebounded, reaching a high of 16,445 yuan/mt. SHFE lead prices then fluctuated rangebound within the range of 16,410–16,445 yuan/mt. It finally closed at 16,415 yuan/mt. It posted a small bullish candlestick, up 125 yuan/mt, or 0.77%. Supply side, with lead prices running at low levels, primary lead enterprises showed weak willingness to sell, while secondary lead enterprises held prices firm and were reluctant to sell on cost support, leaving overall market trading sluggish. Demand side, downstream battery plants only maintained rigid-demand procurement through long-term contracts, while remaining cautious and wait-and-see toward spot order purchases. SMM expects SHFE lead prices to remain in the doldrums in the short term.

[SMM Tin Midday Commentary: The Most-Traded SHFE Tin Contract Continued Its Weak Consolidation, and Market Wait-and-See Sentiment Was Strong]

SMM, March 23: According to market sources, Nandan County Jilang Indium Co., Ltd. is expected to offer crude indium ingots for external sale on the 23rd of this month, with indium purity ≥99.00%, approximately 1,000 kg, subject to YS/T 1163-2016 Crude Indium. Delivery location: the warehouse of Nandan County Jilang Indium Co., Ltd. (Industrial Park, Chehe Town, Nandan County, Hechi City). The seller is responsible for loading and weighbridge measurement, and the freight shall be borne by the buyer. The bidding deadline is before 16:00 on March 23, 2026, after which it will be invalid.

[SMM Chrome Daily Review: Price Gains Slowed, and the Chrome Market Operated Steadily] March 23, 2026 News: Quotations for chrome ore and ferrochrome remained unchanged for the time being...

[SMM Silicon-Based PV Morning Meeting Summary: Polysilicon Prices Remained Slightly Weak, While Module Prices Were Overtly Stable but Softened in Practice] Over the weekend, N-type recharging polysilicon was quoted at 39.5-47.5 yuan/kg, the N-type polysilicon price index stood at 43.64 yuan/kg, and granular polysilicon was quoted at 40-43 yuan/kg. Polysilicon prices still appeared slightly weak over the weekend, with reports of some transactions concluded at low prices. Bearish sentiment among upstream and downstream enterprises persisted, and prices were expected to remain weak.

According to SMM data, during the second half of the traditional "Golden March" peak consumption season (March 16 - March 20, 2026), the most-traded stainless steel futures contract (SS2605) trended lower from its highs under the dual pressure of macroeconomic headwinds and tepid actual demand. By the close on March 20, the contract retreated to 14,150 yuan/mt (approx. $2,051/mt), down 125 yuan/mt (approx. $18/mt) from last Friday's close of 14,275 yuan/mt (approx. $2,069/mt). The market's core feature this week was the marginal weakening of previous bullish factors: international macro signals tilted hawkish, raw material upward momentum stalled, and the substantive recovery of end-user demand during the peak season remained lackluster, prompting a rational pullback in futures prices after hitting resistance. Macro-Economy: Divergence Between Global Hawkishness and Chinese Resilience On the macroeconomic front, a significant divergence emerged between global and Chinese economic data and policy directions. Internationally, the U.S. Federal Reserve ushered in a "Super Central Bank Week," deciding to hold its benchmark interest rate steady at 3.5%-3.75%. Influenced by developments in the Middle East and sticky inflation, the Fed's latest dot plot—despite maintaining expectations for one rate cut this year and next—revealed a distinctly hawkish tilt. Market bets on rate cuts for the entire year were slashed to less than 11 basis points. The dashed hopes for loose dollar liquidity weighed on the overall valuation of the base metals sector. In China, the National Bureau of Statistics released January-February economic data showing a stable start to the year. Value-added industrial output grew by 6.3% year-on-year, and total retail sales of consumer goods increased by 2.8%, though real estate development investment still fell by 11.1% YoY. This structural divergence indicates a certain resilience in Chinese manufacturing, but the drag from the property sector continues to cap the upward elasticity of end-user consumption. Fundamentals: Destocking Continues, But Spot Market Feels Lukewarm Fundamentally, social inventories maintained a destocking trend, but the spot market still lacked vigor. The latest SMM data shows social inventories falling further to 979,300 mt this week, a decrease of 18,800 mt from last week's 998,100 mt. The continuous decline in inventories sent a positive industry signal, stabilizing market sentiment to some extent. However, the spot market still felt cold. Overall quotes remained stable, and end-user procurement strictly followed a just-in-time purchasing model, failing to exhibit the across-the-board boom expected during a peak season and leading to a strong wait-and-see sentiment. Currently, although the destocking trend is preserved, constrained by high absolute inventory levels and the anticipated supply increment from March steel mill resumptions, traders are maintaining a steady pace of shipments without resorting to aggressive panic selling. Costs: High-Level Loosening Pauses Cost-Driven Logic The cost side also showed signs of loosening from its highs. As of March 20, high-grade nickel pig iron (NPI) quotes ended their previous unilateral rally, edging down to 1,084 yuan/mtu (approx. $157/mtu), while high-carbon ferrochrome prices held steady at 8,650 yuan/50 mt (approx. $1,254/50 mt). With the pullback in futures prices and the sustained caution of steel mills regarding high-priced raw materials, NPI faced resistance in breaching the 1,100 yuan mark. The stabilization of raw material prices at high levels, coupled with slight price concessions, has temporarily alleviated the upward pressure on steel mills' cost centers, bringing the previously strong "cost-driven" logic to a temporary halt. Outlook and Strategy In conclusion, the stainless steel market this week entered a "deep water" zone where peak season expectations are repeatedly tested against reality. The Fed's hawkish stance pressured macro sentiment, while the "tepid" state of just-in-time end-user demand left fundamentals lacking intrinsic upward momentum. However, two consecutive weeks of steady destocking and stable spot quotes have effectively limited the depth of the market's correction. Looking ahead to next week, the market will continue to seek a balance between "high inventories + supply increments" and "continuous destocking + just-in-time demand floor." The key focus will be whether the destocking slope reverses due to concentrated arrivals at steel mills. In the short term, the most-traded SS contract is expected to shift into a broad range-bound trend.

Gold is doing the opposite of what it should. The metal is falling for a reason most investors did not see coming. Wall Street's biggest banks have not changed their outlook. Here is why that matters.