July 24, 2026 News: Ferrochrome and Chrome Ore Markets Fluctuate Slightly...

The latest data from the General Administration of Customs shows that in June 2026, China's air conditioner exports reached 5.11 million units, up 11.5% YoY; cumulative exports from January to June totaled 39.16 million units, down 4.6% YoY.

In H1 2026, China’s aluminum extrusion industry ran under three clear traits: feeble domestic demand recovery, overseas demand sliding first then bouncing back, and a sharp split between booming and sluggish product segments.

[SMM Molybdenum Analysis: Mainstream Mine Auction Prices Advanced Firmly, Molybdenum Market Advanced Firmly] SMM, July 15: Today, mainstream mines in China launched open auctions for molybdenum concentrates, with all rounds fully transacted at premiums. Futures prices rose steadily, with standout trading performance, breaking the traditional off-season weakness and showing a typical pattern of strong rally amid off-season and tight spot cargo supply.

SMM, July 12: In the first half of 2026, China's aluminum extrusion industry presented an extreme pattern of structural divergence. Traditional construction extrusion demand remained persistently weak, dragging down the industry’s overall operating load, while industrial extrusion maintained high prosperity, underpinned by new energy, power, and heat dissipation sectors, serving as the core pillar of the industry. Meanwhile, linked volatility in aluminum prices intensified both in and outside China, with the price spread repeatedly narrowing. The export market experienced a "deep V-shaped recovery" trajectory, and the overall industry performance was characterized by "weak recovery in domestic demand, initial suppression followed by recovery in overseas demand, and a stark contrast between strong and weak structural segments." 1. Extrusion Operating Rates: Construction Extrusion Continued to Drag, Industrial Extrusion Resilience Supported the Industry After the 2026 Chinese New Year, the industry entered its traditional peak season for resuming work. In March, extrusion enterprises concentrated on production resumptions and downstream clients engaged in concentrated restocking, pushing the industry's composite operating rate to its H1 peak of 50.6%. Entering Q2, genuine downstream demand follow-through was insufficient, raw material prices fluctuated at high levels, and the industry was further impacted by the rainy season in south China and environmental protection inspections in some regions. As a result, the industry operating rate continued to pull back mildly, falling to 47.6% in June, with the overall operating level weaker than the average for the same period over the past three years. Construction extrusion was the core weak spot dragging down the industry’s overall operations. In H1, data on commercial housing transactions and new construction starts in China remained persistently weak; developers' financial positions showed no significant improvement, and payment returns from project sites were slow. Orders for housing construction-related doors, windows, and curtain wall extrusions continued to shrink. From January to May, domestic aluminum prices generally consolidated at highs, and downstream end-users exhibited strong resistance to high-priced raw materials. Traders and processing plants generally maintained low inventory levels, moving goods in and out quickly, with low willingness to initiate restocking. Although the industry actively expanded non-residential construction demand from industrial parks, standard factories, and government and enterprise public buildings, and home decoration for existing home renovations and home decoration retail recovered slightly, the incremental volume was limited, completely failing to offset the decline in bulk project orders. In H1, construction extrusion operations remained under pressure, making it the biggest drag on the industry. The structural prosperity of the industrial extrusion segment continued to rise, strongly underpinning the industry's operating rates. Demand for power transmission and transformation, energy storage structural components, industrial heat dissipation extrusions, and rail transit supporting profiles maintained steady growth. For PV extrusion, affected by the official cancellation of the export tax rebate policy for PV-related products on April 1, overseas clients concentrated on front-loading orders and enterprises rushed to meet production deadlines in Q1, driving the operating rates for PV frames and mounting extrusions to stage a temporary surge. After the policy took effect, the bonus from overseas rush orders faded, and PV extrusion production schedules returned to rationality, maintaining stable operation from April to June. NEV extrusions showed structural divergence: demand for lightweight extrusions for auto body and chassis remained robust, while demand for ordinary interior extrusions weakened. Overall, the resonance of prosperity across multiple industrial extrusion tracks effectively offset the weak demand for traditional construction materials, highlighting the structural resilience of the industry. 2. Aluminum Extrusion Exports: Deeply Under Pressure in Q1, Continuous Recovery in Q2, V-Shaped Reversal in H1 In H1 2026, China's aluminum extrusion exports followed a V-shaped trend overall, with a sharp decline in Q1 followed by consecutive recoveries in Q2. The driving logic shifted from price inversions and off-season effects overseas at the beginning of the year, towards the release of demand in emerging markets and the transfer of China's processing and manufacturing advantages. Q1: Domestic and Overseas Aluminum Price Inversions Combined with Overseas Off-Season Led to Sharply Weaker Exports Exports from January to February showed off-season resilience, mainly supported by deliveries for orders placed ahead of the Chinese New Year. In January, China exported 81,000 mt of aluminum extrusions, up slightly by 1.4% MoM but down slightly by 5.3% YoY. In February, disruptions from the Chinese New Year holiday saw exports fall to 64,000 mt, a 20.4% MoM decrease but a sharp 62% YoY increase, significantly outperforming the precipitous declines of past Chinese New Year periods. The core reason was that secondary aluminum extrusion enterprises in Guangdong and Fujian concentrated on delivering orders for Southeast Asia and the Middle East before the holiday, while some industrial extrusion enterprises adopted a model of "preliminary domestic processing and deep processing overseas" to speed up contract fulfillment, supporting export volumes at the start of the year. In March, industry exports hit their low point for the first half of the year, with monthly exports of only 48,000 mt, down 24.8% MoM and plunging 32.8% YoY. The core reason for this export slump was not a single geopolitical factor but the resonance of multiple negative factors: first, orders placed ahead of the Chinese New Year overdrew demand from February and March, after which overseas markets entered the traditional consumption off-season; second, LME aluminum saw wild swings in March, and domestic and overseas aluminum prices quickly inverted, compressing export profits for domestic extrusions and leading enterprises to proactively control volumes and take fewer orders; third, the European and US CBAM carbon tariff continued to suppress high-end extrusion exports, causing continuous market shrinkage there, coupled with a slowdown in logistics and customs clearance in some Middle Eastern regions. These multiple factors caused a substantial pullback in export volumes in March. Q2: Emerging Market Volume Surge, Exports See Double YoY and MoM Growth for Two Consecutive Months Starting in April, the price spread between China and overseas markets gradually recovered, the overseas off-season ended, and industry exports began a continuous recovery channel. Exports that month were 76,000 mt, surging 56.8% MoM and up 6.9% YoY, returning to the normal range for past years. Trade and logistics order in the Middle East recovered, stockpiling in Southeast Asia ahead of the rainy season began, and domestic enterprises accelerated their layout in emerging markets in Central Asia and Latin America. Leveraging overseas affiliated warehouses and cross-border stockpiling models to continuously take on rigid demand orders for overseas doors, windows, and curtain walls, export prosperity recovered rapidly. Exports in May continued their high-growth momentum, hitting the monthly peak for H1 at 87,000 mt, up 14.6% MoM and 20.1% YoY. The export structure continued to optimize; low-end construction extrusions saw steady incremental growth, while the export share of high-value-added industrial aluminum components, outdoor aluminum semis, and PV supporting extrusions continued to rise. Southeast Asia, Australia, South America, and Central Asia became the four core growth markets for domestic extrusion exports, effectively offsetting the shrinking demand in European and US markets. 3. H2 2026 Industry Outlook: Weakly Stable Domestic Demand, Marginal Export Weakness, Continued Structural Divergence Looking ahead to H2 2026, the structural divergence pattern in China's aluminum extrusion industry is expected to become further entrenched, with overall operations characterized by "consolidation on a subdued note, industrial support, and construction material drag." On the domestic demand side, the fundamentals of the real estate sector are hard-pressed to see a substantive repair in the short term. Commercial housing new starts and project payment returns are expected to remain weak, and construction extrusion demand will continue to operate in a low range without a trending recovery. Non-residential infrastructure and home decoration retail can only provide a slight offset, unable to reverse the overall weakness of construction extrusions. Industrial extrusion will remain the core pillar of the industry: in H2, steady climbing of domestic PV installations will drive the continued release of demand for PV frames and mounting extrusions; demand for new-type energy storage, data center heat dissipation, and power equipment extrusions will maintain steady incremental growth. NEV extrusions will show a divergence between strong and weak segments; demand for high-end lightweight structural components will be firm, but overall industry overcapacity and intensifying end-user competition will exert marginal contraction pressure on demand for ordinary automotive extrusions. Overall, industrial extrusion can defend the industry’s baseline but can hardly offset the downward pressure from construction extrusions. In H2, the industry's overall operating rate may be slightly lower than in H1. Pressure on the export front will gradually emerge, with the trend potentially turning from the high growth of Q2 to a mild slowdown. In H2, the bonus from overseas traditional peak seasons will gradually fade, while the domestic-overseas aluminum price spread narrows, export processing profits are compressed, and overseas local aluminum processing capacity continues to be released, alongside persistent trade barriers against Chinese aluminum semis in some countries. This will gradually weaken the price advantage of domestic extrusion exports. Although secondary aluminum extrusion exports may still hold cost advantages, homogenized competition in low-end products is fierce and profits remain compressed. The export growth rate for aluminum extrusions is expected to slow down gradually in H2, with overall volumes weaker than in Q2. In summary, throughout 2026, the aluminum extrusion industry is expected to continuously exhibit structural characteristics of weak construction, strong industrial, stable but weak domestic demand, and exports that are high in the first half and low in the second. Industry competition will further concentrate on high-end industrial extrusion, high-value-added deep processing, and overseas emerging markets, with low-end construction extrusion capacity continuously entering a phase of being cleared.

SMM expects secondary lead prices to remain in the doldrums in H2. High scrap battery costs provide rigid bottom support for lead prices, but triple negative factors—macro rate hike expectations, high LME inventories, and the downstream consumption off-season—continue to cap the upside room……

[SMM Cast Aluminum Alloy Morning Comment: Off-Season Demand Hard to Improve, Aluminum Alloy Prices Mainly Move Sideways] The ADC12 market sees coexistence of price adjustments, following rises, and a wait-and-see attitude. The price rise lacks effective support from the demand side, and the market continues to consolidate in the short term.

In H1 2026, the aluminum scrap market faced the dual pressures of tightening policies and weak demand, which weighed on production growth. Coupled with falling primary aluminum prices, an early indicator of a "high opening, low ending" pattern for the year had already emerged. 1. Price Difference Between Primary Aluminum and Scrap In H1 2026, the primary-scrap price difference went through four phases: starting at lows, rapidly widening, consolidating at highs, and then sharply narrowing, falling to a multi-year low by end-June. Phase 1: The price difference was at a relatively low level at the start of the year, with the Shanghai machinery aluminum tense scrap spread ranging between 2,267 and 2,690 yuan/mt. Before Chinese New Year, downstream enterprises gradually entered their holiday break, terminal restocking willingness was low, and the market was marked by "prices without substantial trading." Phase 2: After the holiday, scrap yards gradually resumed operations. Coupled with the US-Iran geopolitical conflict driving up primary aluminum prices sharply, A00 aluminum prices surged from around 23,100 yuan/mt to 25,590 yuan/mt. Aluminum scrap followed the uptrend but at a slower pace, causing the primary-scrap price difference to widen passively. On March 12, the Shanghai machinery aluminum tense scrap spread hit its H1 peak of 3,848 yuan/mt, while the aluminum extrusion scrap spread reached 3,338 yuan/mt. Phase 3: Primary aluminum prices pulled back from highs. Scrap aluminum, affected by policy compliance requirements, saw tighter supply of invoiced material and thus declined by a smaller margin, allowing the price difference to gradually narrow from elevated levels. Moreover, during the "Golden March and Silver April" peak season, demand fell short of expectations, and downstream scrap utilization enterprises mainly purchased as needed. Phase 4: In late June, A00 aluminum prices accelerated their decline, but scrap aluminum showed resilience due to cost support from the reverse invoicing policy, resulting in a rapid narrowing of the price difference. As of July 7, the Shanghai machinery aluminum tense scrap spread stood at 2,080 yuan/mt, and the aluminum extrusion scrap spread had narrowed to 1,588 yuan/mt. Some cast aluminum alloy producers had already begun to consider substituting A00 aluminum ingots for scrap. 2. Scrap Yard Inventories and Warehouse Withdrawals At the start of the year, after environmental protection-driven production restrictions were lifted in central China, inventories of wrought aluminum scrap approached saturation. However, downstream enterprises had extremely low willingness to stockpile due to high aluminum prices, and some planned to shut down early. The overall domestic scrap market showed resistance to high prices and a "price without market" situation, with scrap yard withdrawals continuing to decline alongside downstream production cuts. Around the Chinese New Year period, scrap yards and scrap utilization enterprises gradually closed for the holiday. Outbound shipments were completely suspended, with only a small amount of delayed arrivals contributing minor inbound volumes, and market trading activity was nearly frozen. After the holiday, as scrap yards fully resumed operations, the release of supply increased somewhat. Downstream restarts accelerated, and restocking demand was slowly released. However, constrained by the reverse invoicing policy, overall trading remained relatively sluggish, with withdrawals dominated by small, need-based orders. Meanwhile, at high aluminum prices, scrap yards held back from selling, and warehouse inflows rose with climbing scrap production, causing social inventories to shift from destocking to accumulation. Following the crackdown on invoice-related irregularities and the tightening of the reverse invoicing policy, YoY inflows at mainstream yards in some regions declined, and inventories showed a mild buildup trend. In contrast, inventories of aluminum tense scrap actually decreased. Over the same period, downstream sectors entered the traditional consumption off-season. Operating rates at scrap utilization enterprises stayed low, end-user orders lacked momentum, and the procurement pace turned more conservative. 3. Policy Since the "reverse invoicing" policy was rolled out in 2025, its enforcement was continuously tightened in H1 2026, but local implementation standards diverged significantly — regulatory oversight was relatively stringent in Anhui, Jiangxi, Hubei, and other regions. Some provinces saw the cancellation of tax refunds and intensified tax audits. Shandong also saw reports that reverse invoicing would be suspended from July, with the overall tax burden reaching up to 10.5%. This policy environment has directly led to persistently high tax compliance costs in the aluminum scrap recycling segment. Moreover, under the invoice-based economy norms, traders' invoicing quotas generally declined, causing a structural shortage of compliant invoiced scrap cargoes and notably tightening aluminum scrap liquidity. For scrap utilization enterprises, the impact has propagated along a chain of "tighter raw materials/rising costs — production cuts/suspensions — substitution risks": first, rising prices of invoiced raw materials directly pushed up procurement costs; subsequently, many small and medium-sized scrap utilization enterprises in regions such as Anhui, Jiangxi, and Hubei suffered losses and cut or suspended production; ultimately, the price difference between primary metal and scrap narrowed rapidly to historical lows as aluminum scrap held firm while primary aluminum fell, sharply eroding the cost advantage of scrap over primary aluminum. Some cast aluminum alloy enterprises are already considering using A00 aluminum ingots to replace aluminum scrap in production, posing a risk that the market demand base for aluminum scrap could be eroded. 4. Aluminum Scrap Production In terms of total volume, China's cumulative aluminum scrap production in January-June 2026 was 4.2928 million mt, up approximately 11.58% YoY from 3.8472 million mt in the same period of 2025. January production stood at 765,700 mt, surging 48.97% YoY, primarily due to the later Chinese New Year, leading to far more effective production days than the same period last year, coupled with front-load orders caused by the phase-out of auto industry policies. Affected by the Chinese New Year break, February production seasonally pulled back to 541,200 mt, but still grew by 10% YoY. March-April entered the traditional peak season, with production rebounding to 753,400 mt and 781,200 mt, posting YoY growth of 5.14% and 12.81%, respectively. The peak of the season was in April, and capacity release and the pace of work resumption remained normal. However, May production pulled back to 739,300 mt, with YoY growth narrowing to only 4.13%, indicating that the squeeze from the reverse invoicing policy on small and medium-sized scrap utilization enterprises began spreading from isolated cases to a broader scale. This trend accelerated in June, as production further dropped to 712,000 mt, turning negative YoY at -1.4% and down 3.69% MoM from May, making it the only month in H1 with negative YoY growth. The key reasons for the June decline were: the rising compliance costs caused by the reverse invoicing policy had already driven many small and medium-sized scrap utilization enterprises in Anhui, Jiangxi, Hubei, and other areas into losses and production cutbacks, while the price spread between primary metal and scrap narrowed to historical lows, sharply diminishing the cost advantage of aluminum scrap. This dampened collection enthusiasm and caused a supply contraction at the source. Therefore, beneath the surface of "total volume growth but a front-loaded, then decelerating pace" in H1 aluminum scrap production, the reality is that the policy shock is rapidly transmitting from the cost side to the supply side, and the downward pressure on H2 production cannot be underestimated. 5. Aluminum Scrap Imports China’s cumulative aluminum scrap imports from January to May 2026 stood at approximately 849,300 mt, edging down 0.84% YoY from 856,500 mt in the same period of 2025. On the surface, the total volume was almost flat, but the monthly trend showed a pronounced “high-then-low” pattern, and the driving force shifted from ample overseas supply in Q1 to a combination of multiple bearish factors in Q2. Q1 cumulative imports grew 3.9% YoY, with Thailand as the largest source country maintaining steady shipments. At the beginning of the year, relatively ample overseas aluminum scrap supply and active stockpiling by domestic secondary aluminum enterprises together supported the high imports. Entering Q2, the situation took a sharp turn for the worse: April imports were 171,000 mt, down 10.4% YoY, and May imports further dropped to 152,000 mt, down 4.8% YoY and 10.9% MoM, forming a contraction pattern of declining volumes and prices. The bearish factors behind this were multidimensional and mutually reinforcing. First, the US-Iran geopolitical conflict drove LME aluminum prices sharply higher, and overseas spot aluminum scrap prices rose accordingly. The overall landed cost for domestic import traders was significantly higher than domestic aluminum scrap prices, and the persistent inversion of the price spread between Chinese and overseas markets directly dampened procurement enthusiasm. Second, high energy prices in Europe intensified competition among local secondary aluminum enterprises for aluminum scrap raw materials, and shipments to China from traditional source countries such as the UK, Spain, Belgium, and France all pulled back to varying degrees. A more far-reaching impact came from policy tightening in exporting countries: the UAE imposed a four-month temporary ban on aluminum scrap exports starting June 3, and the EU also plans to impose an additional 15% tariff starting September. Both factors tightened the availability of high-quality scrap in the Asian region from both immediate and expected aspects. In addition, aluminum scrap imports typically have a shipping lead time of 1-3 months. The significant reduction in purchases by traders in Q2 will be reflected in landing data in Q3, creating a “lagged impact.” Overall, although the total imports from January to May only edged down slightly, the driving structure has reversed from “stable volumes and rising prices” in Q1 to “declining volumes and prices” in Q2. Moreover, the contraction in overseas supply has only just begun to materialize, and the import outlook for H2 faces greater downward pressure. 6. H2 Outlook The aluminum scrap market is expected to continue consolidating on a subdued note in H2, but with significant bottom support. The price difference between primary metal and scrap has narrowed to a historic low, and the reverse invoicing policy constraint continues to establish a floor for aluminum scrap prices. If primary aluminum prices stabilize and rebound, there is room for a slight recovery in the spread, but the extent is limited; if primary aluminum continues to decline, the substitution effect of aluminum scrap will materialize at a faster pace, putting further pressure on the spread, and an extreme scenario of price inversion between scrap and primary aluminum may even emerge. The reverse invoicing policy is unlikely to see substantive easing in the near term, and the tightness of compliant, invoiced supply is expected to persist. Close attention should be paid to the policy implementation standards in newly joined provinces such as Shandong, changes in local tax inspection intensity, and whether there will be a window for optimizing and adjusting policy details. Overall, the core tension in the aluminum scrap market in H2 remains the tug-of-war between "supply contraction driven by policy tightening" and "consumption weakness caused by sluggish demand." Close attention also needs to be paid to progress in US-Iran negotiations and navigation conditions in the Strait of Hormuz, the pace of aluminum scrap arrivals from outside China and enforcement of the UAE ban, the compliance progress pace of the reverse invoicing policy and differences in local implementation, changes in aluminum ingot inventories, and when the inflection point for secondary aluminum alloy ingot inventory will appear. [Data source statement: Data other than public information is derived from public information, market communication, and SMM's internal database models, processed by SMM for reference only and does not constitute decision-making advice.]

SMM Analysis: In H1 2026, the core operating logic of China’s copper anode market can be summarized as follows: overseas project startups drove a recovery in imports, but the tightening of domestic secondary copper policies rapidly shifted the supply-demand pattern from a surplus in Q1 to tightening in Q2...

[ADC12 Price Daily: ADC12 Prices Generally Stable with Slight Rise, Inverted Domestic-Overseas Spread Continues to Narrow] Quotes in the secondary aluminum alloy market predominantly held steady with a slight rise today. The SMM ADC12 price increased by 50 yuan/mt from the previous trading day to 24,050 yuan/mt. The rebound in aluminum prices and high cost-side operations remained key factors supporting enterprise quotes. Tight supply of aluminum scrap and persistently high procurement costs kept enterprises' willingness to cut prices low.