[China Iron Ore Brief Review: Iron Ore in Shandong May Continue to Edge Higher] This week, at mines and beneficiation plants in Shandong, the ex-mine quote for 64 grade alkaline fines on a dry basis, before tax and settled by bank acceptance, was 899, up 17 yuan/mt. Steelmakers raised prices in tandem, most miners maintained normal production, and some mines slightly increased output. Steel mills showed moderate willingness to purchase, mainly under long-term contracts, while shipments from small plants and traders were also relatively good, with overall transactions improving; after a large mine in Zaozhuang resumed production

As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.

[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

Indian steelmakers, led by JSW Steel, are increasingly sourcing high-grade Pilbara ores from Australia as China imposes selective import restrictions on certain BHP Group products. Industry reports indicate that Indian mills are leveraging these supply diversions to secure premium ores at competitive spot-market rates, stabilizing feedstock availability for their expanding integrated plants. This trend supports India's aggressive capacity growth targets while allowing Australian exporters to diversify their demand base away from a single dominant market.

[SMM Nickel Flash] News on March 23: Supply side, supply issues on the ore side continued to support the production cost of high-grade NPI, while nickel prices recovered and the market's low-price sell-off ended. Demand side, steel mills still showed a stronger preference for purchasing steel scrap, and their current willingness to purchase high-grade NPI remained low. Overall, the transaction center of high-grade NPI stabilized, and the market expects a rebound in stainless steel prices to boost the ceiling for raw material prices.

Dalian iron ore futures rose in early trading and pulled back in the afternoon. The most-traded contract, I2605, finally closed at 824 yuan/mt, up 0.55% from the previous trading session. Spot prices rose by about 2-5 yuan from the previous trading day. Traders were relatively active in offering quotes, while steel mills made fewer inquiries and purchased cautiously, with overall transactions in the spot market remaining average. In terms of fundamental data, blast furnace maintenance intensity continued to pull back this week, with maintenance affecting hot metal production by 1.65 million mt, down 206,500 mt WoW. It was expected to decrease by a further 180,000 mt next week to 1.4684 million mt, indicating a gradual improvement on the demand side. In terms of supply, tight supply still persisted in the market, and there was no news of any significant adjustment, which remained supportive for iron ore in the short term. However, some funds, out of concern over downstream risks, tended to stay on the sidelines, and overall wait-and-see sentiment was strong. In summary, iron ore prices were expected to hover at highs in the short term.

Italy’s crude steel production increased by 8.1% month-on-month in February 2026, signaling a recovery in Southern European industrial activity. This rebound follows a period of stabilization and reflects improved demand from domestic manufacturing and construction sectors as energy price volatility subsides. The increase in output from Italian mills contributes to a moderately positive outlook for non-Chinese steel demand in 2026, which is projected to grow as interest rates decline and borrowing costs for major infrastructure projects soften globally.

The United States reported a 45.9% year-on-year reduction in imports of rolled steel during early 2026, reflecting the impact of newly implemented trade measures and heightened tariffs under Section 122. This sharp decline in foreign supply has significantly tightened the domestic market, allowing major US mills to increase spot market prices for hot-rolled coil to over $1,015 per tonne. Analysts suggest that the new tariff regime, which applies a 10% across-the-board duty on nearly all imports, is forcing a localized supply chain shift for North American manufacturers.

[SMM Daily Review: High-Grade NPI May Still Have Downside Room Under the Dual Pressure of End-Users and Steel Scrap] March 24 News: SMM's upstream sentiment factor for high-grade NPI was 2.88, up 0.01 MoM, while the downstream sentiment factor for high-grade NPI was 1.59, down 0.04 MoM.

Strait of Hormuz disruptions and Iran tensions are driving up aluminum prices and premiums. Aluminium Bahrain and Qatalum have cut output, while feedstock is tight. Rerouting via Port of Sohar or Saudi ports raises costs and delays. Buyers are turning to China, India, Russia, Canada, and scrap to offset risk. Prolonged disruption could reduce Middle East market share and reprice it as higher-risk supply.