According to SMM data, the week of March 23–27, 2026 marked the final stretch of China’s traditional peak-demand season known as “Golden March.” During the week, the most-active stainless steel futures contract ( SS2605 ) posted a firmer, rangebound rebound as weak fundamentals clashed with renewed macro support. By the close on March 27 , the contract had risen to RMB 14,355/mt (about USD 2,076/mt) , up RMB 205/mt (about USD 29.65/mt) from RMB 14,150/mt (about USD 2,047/mt) a week earlier. The week’s defining feature was a sharp contrast between weak spot fundamentals and resilient market expectations. Physical demand remained mediocre, and social inventories moved back into accumulation. Even so, stainless futures found strong support from easing concerns over the Middle East, policy-related uncertainty in Indonesia’s nickel sector, and liquidity support from China’s central bank. As a result, prices managed to hold the lower end of the recent trading range and rebound from there. Macro backdrop: easing geopolitical stress, but rates remain a headwind At the macro level, both overseas and China-related developments saw important shifts. In the Middle East, the nearly month-long Strait of Hormuz crisis showed signs of easing after Iran’s mission to the United Nations said that non-hostile vessels could still pass safely through the strait in coordination with Iranian authorities. That helped cool fears of a major energy supply disruption. However, the inflation fallout from the earlier oil price spike has already shown up in global rates markets. US Treasury yields remained elevated, further reducing room for aggressive Fed easing expectations. In China, the central bank conducted a RMB 500 billion one-year MLF operation , equivalent to about USD 72.32 billion , helping keep liquidity conditions reasonably ample. While this was largely a routine move, it did help ease some of the valuation pressure created by a high global interest-rate environment and offered a degree of support to the market floor. Fundamentals: destocking stalls as inventories edge higher again On the fundamentals side, the destocking trend came to an abrupt halt, and “Golden March” ended on a disappointing note. The latest SMM data showed that social inventories failed to extend the declines seen over the previous two weeks and instead edged up to 982,000 mt , from 979,300 mt the week before, an increase of 2,700 mt . That renewed inventory build hit a sensitive spot for the market. In the spot market, downstream buyers continued to replenish only as needed, with very little appetite for stocking up. Throughout March, trading activity never showed the kind of momentum normally associated with a true seasonal demand peak. At the same time, mills have maintained relatively high production schedules, creating a mismatch between concentrated arrivals and lukewarm demand. As a result, inventory digestion is becoming more difficult rather than less, placing a clear cap on further upside in both futures and spot prices. Cost support stays firm as Indonesia policy rumors stir the market The cost side remained notably resilient, with fresh policy speculation adding another layer of support. As of March 27 , high-grade NPI was quoted at RMB 1,083.5 per nickel unit (about USD 156.71 per nickel unit) , while high-carbon ferrochrome held firm at RMB 8,650 per 50-basis mt (about USD 1,251.07 per 50-basis mt) . Although weak spot fundamentals still left mills inclined to push back against expensive raw materials, the market was unsettled this week by reports and rumors surrounding possible Indonesian export taxes and windfall taxes on nickel products. That policy uncertainty quickly revived bullish sentiment and helped upstream prices stabilize even as the market faced correction pressure. With raw material costs remaining elevated, downside room in stainless steel futures continued to look limited. Outlook: macro support sets the floor, weak demand caps the upside Overall, this week’s market was a clear example of macro support defining the downside floor while weak fundamentals capped the upside. “Golden March” ended without delivering the demand strength many had hoped for, and the return to inventory accumulation undermined the bullish case from a fundamental perspective. Even so, the combined effect of China’s RMB 500 billion MLF injection, easing Middle East tensions, and Indonesian tax-related speculation helped prevent a breakdown and instead allowed prices to rebound. Looking ahead, the market is now moving into the “Silver April” period. With inventories still high and mill output still elevated, there is little in the current fundamentals to support a strong one-way rally. At the same time, cost support remains firm enough to make a deep decline difficult. In the near term, the most-active stainless steel futures contract is expected to remain in a broad trading range. Market participants should pay close attention to whether Indonesian policy measures are formally implemented and how quickly spot inventories are absorbed after the holiday period. For now, chasing prices higher aggressively still looks risky. Written by: Bruce Chew | bruce.chew@smm.cn +601167087088

[SMM Morning Meeting Summary: Support from the Macro Front Was Relatively Evident, and Tin Prices Were Expected to Maintain a Fluctuating Trend in the Short Term]

[SMM Aluminum Morning Meeting Minutes: Geopolitical Risks in the Middle East Cool Significantly; Aluminum Prices to Fluctuate at Highs in the Short Term] Overall, from a macro perspective, easing geopolitical risks and the continued buildup of domestic social inventory have created bearish pressure on aluminum prices. However, the geopolitical situation in the Middle East remains unclear; if the conflict persists, expectations for a tightening of global aluminum supply are strong, and aluminum prices still have solid upward momentum. In the short term, aluminum prices are still expected to hold up well.

Market Overview According to SMM data, during the first trading week following the Lunar New Year holiday (February 24 – February 27, 2026), the dominant stainless steel contract (SS2604) opened high and maintained a strong trend, driven by significantly rising raw material costs. By the close on February 27, the contract price had climbed to 14,150 CNY/mt ($2,065.69/mt) , an increase of 385 CNY/mt ($56.20/mt) or +2.80% compared to the pre-holiday closing price of 13,765 CNY/mt ($2,009.49/mt) . In the early post-holiday period, the market's upward logic was primarily dominated by rising costs on the supply side. However, as the price center shifted upward rapidly, the substantial accumulation of social inventory during the holiday formed a tangible suppression on the upside potential. Consequently, futures prices maintained a fluctuating struggle within the 14,100–14,200 CNY ($2,058.39–$2,072.99) range. Macroeconomic Analysis From a macro perspective, the market is navigating an interplay between reasonably ample domestic liquidity and uncertainties regarding overseas trade policies. Domestic: On February 25, the central bank conducted a 600 billion CNY ($87.59 billion) one-year Medium-term Lending Facility (MLF) operation. This continued to maintain ample liquidity in the banking system, providing macro support for the traditional "Golden March and Silver April" peak consumption season and stabilizing market expectations. Overseas: The U.S. Trade Representative stated they would continue to advance the Section 301 investigation regarding the Phase One trade agreement, with proposals to raise "global import tariff" rates from 10% to 15% or higher. Potential tariff changes have intensified uncertainty in the external macro environment, which may have a negative impact on future export expectations for stainless steel and related end-products. Fundamentals: Inventory & Demand Fundamentally, the post-holiday market faces the reality of a massive inventory buildup while end-user demand is still in a recovery phase. Inventory: Latest SMM data shows that, due to the long Spring Festival holiday, social inventory significantly increased to 1.0161 million tons this week. This is an increase of 121,600 tons compared to the pre-holiday level of 894,500 tons , breaching the one-million-ton mark. Spot Transactions: The market is currently in a gradual restart phase. Downstream processing factories have not yet fully resumed work, and current spot circulation is mostly concentrated on resource allocation between traders. The end-market's actual ability to digest current high-priced resources remains to be verified after enterprises fully resume work next week. Sentiment: In the short term, high inventory levels pose significant pressure on prices. However, supported by expectations for the "Golden March and Silver April" peak season, holders' sentiment remains temporarily stable, with no large-scale sell-offs observed. Cost Analysis The significant strengthening of the cost side was the core driver for the high market opening this week. Driven by news of tighter Indonesian nickel ore quotas and fluctuating rises in nickel prices post-holiday, there is a strong willingness to support prices on the raw material side. High-grade Nickel Pig Iron (NPI): As of February 27, quotes were raised significantly, rising by 33.5 CNY ($4.89) in a single week to 1,085 CNY/nickel point ($158.39/nickel point) . High Carbon Ferrochrome: Prices remained temporarily stable at 8,550 CNY/50 basis tons ($1,248.18/50 basis tons) . The expectation of tight ore supply materialized quickly after the holiday, substantially raising the immediate production costs for steel mills. The upward shift in the cost center effectively limited the room for market correction and forced a passive, steady rise in the center of spot transaction prices. Outlook & Strategy Overall, the stainless steel market in the first week after the holiday presented a tug-of-war pattern: "Strong Expectations & High Costs" vs. "Weak Reality & High Inventory." While the sharp rise in NPI prices established a tone for a strong fluctuating market, the social inventory exceeding one million tons—coupled with end-user demand that has yet to kick in—constrained further upside potential. Looking ahead to next week, the market trading logic will gradually shift from "sentiment-driven" to "fundamental verification." Short-term: Futures prices are expected to maintain a strong fluctuation at high levels. Medium-to-long-term: The trend will depend on the actual realization of demand during the "Golden March and Silver April" peak season after downstream sectors fully resume work. Industrial clients are advised to closely monitor the inventory inflection point (destocking) and actual spot transaction conditions next week. Carefully assess the risks of chasing highs and reasonably utilize hedging tools to manage exposure.

[SMM Aluminum Morning Meeting Minutes: Overall Warm Macro Front Contends with Inventory Buildup Reality, Aluminum Prices Under Pressure and Fluctuating in the Short Term] In summary, aluminum prices are expected to continue their fluctuating trend under pressure in the short term, constrained above by the reality of inventory buildup and supported below by macro expectations. They are anticipated to remain in the doldrums with limited room for a rebound.

[SMM Aluminum Morning Meeting Summary: Macro Support Coexists with Tug-of-War Between Sellers and Buyers, Aluminum Prices Show Both Resilience and Pressure in the Short Term] Overall, favorable macro conditions provide a floor for aluminum prices, and low inventory further strengthens price resilience. However, the pressure of the off-season on the demand side limits the upside room. In the short term, attention should be paid to the performance of domestic and overseas demand, as well as the supply situation of bauxite.

【4.25 Morning Meeting Minutes】Indonesia's local ore premiums remained stable, smelter cost lines were generally stable with a slight rise, while spot prices have fallen below the cost lines of some smelters, leading to a simultaneous weakening in production drivers and domestic trade, with overall production remaining stable. Demand side, stainless steel spot prices are at low levels in recent years, and the immediate raw material costs have already shown an inversion.

【4.23 Morning Meeting Minutes】LME nickel prices rebounded significantly recently, driven by cost support and the fading of negative sentiment from US policies, which strengthened the support range for nickel salt production costs. Under the effect of cost transmission, the production cost pressure on nickel salt smelters continued to rise. Supply side, the availability of nickel salt for sale from smelters tightened this month, with the overall industry inventory level remaining low. Influenced by the MHP coefficient and its persistently high prices, the sentiment to stand firm on quotes among nickel salt smelters persisted.

【4.22 Morning Meeting Minutes】Today, the SS futures price showed a fluctuating trend. The adjustment of US tariff policies significantly impacted export-oriented stainless steel enterprises, coupled with the continued weakening of stainless steel cost support, severely dampening market confidence. The anticipated pre-Labour Day holiday stockpiling purchases did not materialize as expected, and market transactions remained sluggish.

【4.21 Morning Meeting Minutes】Last week, nickel ore prices in the Philippines remained stable. From the perspective of supply and demand, the rainy season in the southern Philippines has basically ended, and shipments of medium-grade nickel ore from mines in the Surigao region are expected to increase. On the demand side, domestic NPI prices continued to decline during the week, and domestic smelters' acceptance of high-priced nickel ore decreased.