[SMM Platinum and Palladium Weekly Review] This week (March 9–March 13), the most-traded platinum futures contract PT2606 opened at 534 yuan/gram and closed at 541.6 yuan/gram, down 15.7 yuan/gram WoW from last week’s settlement price, a decline of 2.82%. The weekly highest price was 577.85 yuan/gram, and the weekly lowest price was 522.6 yuan/gram; the most-traded palladium futures contract PD2606 opened at 408.75 yuan/gram and closed at 408.1 yuan/gram, down 13.8 yuan/gram WoW from last week’s settlement price, down 3.27% WoW from last week’s settlement price. The weekly highest price was 430 yuan/gram, and the weekly lowest price was 397 yuan/gram. Futures trading: The most-traded platinum futures contract PT2606 recorded total trading volume of 31,227 lots during the week, with total turnover of 17.368 billion yuan and open interest of 19,989 lots; open interest decreased by 1,894 lots WoW. The most-traded palladium futures contract PD2606 recorded total trading volume of 11,077 lots during the week, with total turnover of 4.616 billion yuan and open interest of 7,612 lots; open interest increased by 11 lots WoW. At present, the US–Iran conflict remained dominated by political expectations, while the reality on the ground was still unresolved. On the political-expectations front, Trump frequently released marginal de-escalation signals to curb oil prices, saying the Iran issue was only a short-term military operation and expressing willingness to engage in dialogue with Iran; the TACO trade pulled oil prices back to around 90. On the reality front, Mojtaba, son of Khamenei, formally succeeded to power, and Iran entered the “Era of Avengers,” beginning to threaten the Strait of Hormuz; its foreign minister said the new leadership would refuse to negotiate with Trump. If the US–Iran conflict continues to escalate, it will push up oil prices and trigger concerns over imported inflation in the US, thereby delaying the Fed’s progress on interest rate cuts. On tariffs, after reciprocal tariff was overturned by the Supreme Court, the Trump administration will seek a more solid legal basis to rebuild the tariff framework. The risk of re-inflation remained relatively high, and disputes over new tax rates and tax rebates lifted policy uncertainty to some extent. In the short term, Trump filled the tariff-rate vacuum through the 122 temporary tariff; in the medium and long-term, he may maintain a high-tariff framework via 232 and 301. In addition, the massive tax rebate pressure brought about after reciprocal tariff was ruled illegal will further increase the US fiscal burden, thereby reinforcing the logic of a weaker US dollar and providing support to precious metals overall. Supply side, NERSA announced it had formally approved Eskom’s electricity price adjustment plan for the next two years: electricity prices will be raised by 8.76% in April this year and raised again by 8.83% in April 2027. As South Africa’s PGM mining is highly dependent on electricity, rising electricity prices will continue to lift the cost center for platinum and palladium. The US Department of Commerce issued an announcement, making an affirmative preliminary anti-dumping determination on unwrought palladium imported from Russia, preliminarily determining the dumping margin for all Russian exporters/producers at 132.83%. In terms of valuation, watch changes in the US dollar index, which involve the relative strength of currencies such as the euro and the yen. Pay attention to details on the new administrator announced by the LME. Pay attention to the March 19 FOMC meeting, changes in economic data, and the impact of Wosh’s remarks on monetary policy expectations. The precious metals sector mainly benefited from the policy and political-environment tug-of-war during the US Fed’s midterm-election time window. From a medium- and long-term perspective, the foundation for a bull market in platinum and palladium remained intact. In the short term, be alert to the risk of a phased adjustment driven by a delay in expectations for an interest rate cut; pullbacks should be viewed as medium- and long-term opportunities to add long positions. Amid high fluctuations in platinum and palladium, pay attention to position sizing. As domestic and overseas markets are not continuous, the opening price of platinum and palladium often references the overseas night session; investors should monitor trading prices in international markets and be wary of opening gaps. Spot market, this week most traders holding cargo actively quoted prices. Some traders reported that supply was currently relatively ample while the market was relatively sluggish. Most downstream clients had sufficient inventory and mainly stayed on the sidelines, with only some downstream buyers making small, negotiated purchases to meet order demand. Along with continued cooling in investment demand, transactions were relatively difficult and price involution was severe. Overall, spot market trading this week was generally subdued.

[SMM Analysis] On March 12, 2026, the US International Trade Commission (ITC) ruled against imposing tariffs on Chinese graphite imports. Below is the complete timeline of the US anti-dumping and countervailing duty (AD/CVD) investigations into active anode material (graphite anode) from China, the duty rates at each stage, and the latest results as of March 12, 2026.

March 13 News: Northern ports: South African high-grade ore, 32.5-35.4 yuan/mtu, prices up WoW from last Friday; South African semi-carbonate, 38.9-39.4 yuan/mtu, prices up WoW from last Friday; Gabon ore, 44.3-44.9 yuan/mtu, prices up WoW from last Friday; 46% Australian lumps, 44.9-45.4 yuan/mtu, prices up WoW from last Friday. South China ports: South African high-grade ore, 33-33.5 yuan/mtu, prices flat WoW from last Friday; South African semi-carbonate, 35.9-36.4 yuan/mtu, prices up WoW from last Friday; Gabon ore, 42-42.5 yuan/mtu, prices flat WoW from last Friday; 46% Australian lumps, 43.4-43.9 yuan/mtu, prices flat WoW from last Friday.

It was learned that the weekly composite operating rate of lead-acid battery enterprises across five provinces tracked by SMM stood at 73.45% from March 6 to March 12, 2026, up 1.78 percentage points WoW from the previous week. In March, major lead-acid battery enterprises basically resumed normal production. The last batch of enterprises that resumed work in early March also recently completed production ramp-up on their production lines, with operating rates of 80-100% at medium and large enterprises and 50-80% at small enterprises. At present, most orders for e-bike and automotive battery enterprises came from dealers' routine post-Chinese New Year restocking, but actual improvement in end-use market consumption remained limited. Among them, battery exports were affected by factors such as tariffs, the SHFE/LME price ratio, and transportation, and export-oriented enterprises saw weak order performance. In addition, orders for ESS battery enterprises were moderate, especially tender orders from data centers, and the production lines of such enterprises were operating at full capacity.

Recently, Dr. Du from US Plug Power, a globally leading provider of hydrogen energy solutions, and his delegation visited Suzhou Xinsichuang Hydrogen Energy Technology Co., Ltd. for exchanges. The two sides held in-depth discussions on hydrogen technology R&D, industry ecosystem development, and global market positioning, laying a foundation for subsequent cross-border collaborative cooperation. As a pioneer in the hydrogen fuel cell industry, Plug Power has cultivated the hydrogen energy sector for many years and is committed to building an entire industry chain ecosystem covering green hydrogen production, storage, transportation, and terminal power generation. Its business is extensively deployed across diverse scenarios such as material handling, stationary power supply, and on-road EVs, making it a benchmark enterprise in the development of the global green hydrogen industry. During the field trip, Dr. Du and his delegation visited Xinsichuang’s production workshop and gained a detailed understanding of the company’s hydrogen equipment manufacturing capabilities and latest progress in technology R&D. At present, Xinsichuang is accelerating its transformation from a hydrogen equipment manufacturer into a **comprehensive green electricity and green fuels service provider**. Leveraging its core technological advantages in hydrogen production equipment, the company is making every effort to connect the entire chain of the hydrogen industry from the manufacturing end to the supply end and build differentiated competitive advantages. During the discussion session, General Manager Zeng of Xinsichuang highlighted the company’s project deployment and implementation in Hainan, Indonesia, the Middle East, and other regions, as well as the progress of exporting its hydrogen equipment technologies to Japan, Singapore, Europe, and other countries and regions. Dr. Du expressed strong interest in Xinsichuang’s strategic transformation direction and pace of global expansion. The two sides conducted thorough exchanges on topics including collaborative technological innovation and jointly building a global hydrogen energy ecosystem, and reached multiple cooperation consensuses. As the global energy transition continues to accelerate, the hydrogen energy industry has moved from the technology validation stage into a window period for large-scale application. Xinsichuang stated that in the future, it will continue to uphold an open and cooperative philosophy, deepen exchanges and collaboration with leading global hydrogen energy enterprises, steadily advance project implementation in China and overseas, bring high-quality green energy solutions to broader markets, and contribute to the high-quality development of the global hydrogen energy industry.

The Indian Stainless Steel Development Association (ISSDA) has recently urged the government to permanently remove customs duties on imported scrap and ferroalloys, and to classify chromium as a critical mineral, in order to support the country’s planned expansion of stainless steel capacity from 7 million mt to 11 million mt. At the same time, ISSDA has also called for stronger measures to address the impact of low-priced Chinese products, warning that some Chinese material may be entering India through third countries such as Vietnam, thereby bypassing existing trade protection measures. These statements suggest that the Indian stainless steel industry is no longer simply asking for “growth support.” Instead, it has entered a more complex phase, where it wants to accelerate capacity expansion while also defending itself against external competition. Capacity Expansion Is Clear, and India’s Stainless Steel Industry Has Entered a Critical Phase At first glance, these may look like two conflicting policy demands. On the one hand, the industry wants lower import duties on raw materials to reduce production costs. On the other hand, it is asking the government to tighten import restrictions and strengthen trade protection. But when viewed within the broader industry cycle that India’s stainless steel sector is currently going through, these two demands are not contradictory. They are simply two sides of the same expansion cycle. For domestic stainless steel producers in India, the most important goal over the next few years is to build up local supply capacity while domestic demand is still growing. ISSDA has previously estimated that stainless steel demand in India will continue to grow by 7%–8% annually over the next two to three years. Against this backdrop, the industry wants to keep raw material costs as low as possible during the expansion phase, while also preventing low-priced imported finished products from eroding returns before local capacity expansion is complete. In other words, what worries India’s stainless steel industry most right now is not the absence of market demand, but the possibility that demand exists while the gains from expansion are undermined by imports. That is why ISSDA is simultaneously calling for the permanent removal of duties on scrap and ferroalloy imports, while also highlighting the threat posed by low-priced Chinese products. In the industry’s view, lower tariffs on raw materials would improve the competitiveness of domestic manufacturing, while stronger protection on finished products would buy time for local investment, expansion, and capacity ramp-up. This policy logic of “opening the upstream while defending the downstream” is, in essence, a typical industrial development strategy. Raw Material Security Has Become the Core Condition Behind Expansion This also reflects the industry’s growing concern over raw material supply. Scrap and ferroalloys are key inputs for stainless steel production, while chromium is a critical element in the stainless alloy system. ISSDA’s specific call to classify chromium as a critical mineral shows that its focus is no longer limited to short-term price issues, but has shifted toward medium- to long-term resource security. India has long been the world’s largest importer of stainless steel scrap. Data shows that its stainless scrap imports rose to 1.58 million mt in 2025, up significantly from 2024, further underscoring India’s continued reliance on overseas scrap supply. For a country aiming to expand stainless steel capacity from 7 million mt to 11 million mt, whether the raw material supply system can scale up in parallel will directly determine whether that expansion can actually be delivered. If import costs for scrap and ferroalloys remain high, or if chromium supply security proves insufficient, then even the most ambitious capacity plans could face rising costs, margin pressure, or slower project execution in practice. From the industry’s perspective, therefore, removing duties on imported raw materials and strengthening critical mineral management are not isolated policy demands. They are essential supporting measures for the broader expansion target. India’s stainless steel industry wants to secure the raw material base first before further releasing capacity, reflecting a deeper concern for supply chain completeness and long-term sustainability. Demand Continues to Grow, but Cheap External Supply Creates Real Pressure On the demand side, India is still seen as one of the most important growth markets for stainless steel consumption globally. With the development of manufacturing, continued infrastructure investment, and upgrading in end-use consumption, India’s stainless steel demand is expected to maintain relatively strong growth, providing a solid foundation for capacity expansion. The challenge, however, is that demand growth does not automatically mean domestic producers will benefit. If most of the incremental demand is captured by imported material, India may see consumption expand without domestic industry benefiting to the same extent. In this context, ISSDA’s concerns over Chinese oversupply spilling into India become particularly sensitive. According to media reports, ISSDA believes China has more than 8 million mt of excess stainless steel melting capacity, and that this material is seeking overseas outlets, with India standing out as one of the most attractive target markets. The reason is straightforward. On the one hand, India is itself a growth market. On the other hand, its domestic supply system is still in the process of expanding and has not yet built an unshakable market barrier, making it more exposed to external supply pressure. For Indian mills, this pressure is not only reflected in price competition, but also in investment expectations. When an industry is in the middle of an expansion phase, companies need a relatively predictable margin environment to support new investments, depreciation costs, and capacity ramp-up. If large volumes of low-priced imports continue to flow in during this period, domestic producers may struggle to convert rising demand into actual returns. The Risk of Rerouted Trade Is One of India’s Bigger Concerns Another important point in ISSDA’s latest statement is the issue of rerouted trade. The association warned that some Chinese steel products may be entering India through third countries such as Vietnam, thereby bypassing existing trade protection measures. This concern is easy to understand. In recent years, amid ongoing global trade friction and stricter origin management, practices such as third-country rerouting, supply chain detours, and origin restructuring have come under increasing scrutiny. For India, this means that even if trade protection measures exist on paper, actual import pressure may not disappear in practice. In other words, what truly concerns the industry is not simply whether tariffs or barriers exist, but whether these measures can actually work as intended. If external supply can continue entering India through more complex trade routes, then the competitive pressure facing domestic producers will not ease in any meaningful way, weakening the real impact of policy protection. India’s Core Objective Is to Turn Demand Advantage Into Industrial Advantage At a deeper level, India’s stainless steel industry is moving from a stage of demand-driven growth to one of broader industrial competition. In the past, discussion of India’s stainless steel market often focused on its consumption growth potential, including its large population base, urbanization, and manufacturing upgrade. But as consumption continues to expand, the question is no longer simply whether demand will grow, but who will ultimately capture that growth. If domestic demand keeps rising while most of the incremental market is filled by imports, India may become a major consumption market without necessarily becoming a true manufacturing powerhouse. What ISSDA is now pushing for is, in effect, the key step needed to turn India’s demand advantage into industrial advantage. That is why the industry is asking the government to lower upstream raw material costs while at the same time strengthening trade defense at the finished-product end. The underlying logic is not simply to reject imports, but to create a more supportive environment for domestic manufacturing to grow and attract investment. The Direction of Future Policy Is Worth Watching Viewed within the broader competitive landscape of the Asian stainless steel market, India’s position is actually becoming quite clear. It does not want to remain merely a consumption market. It wants to become a more complete domestic manufacturing center. That means its policy stance is likely to continue along a dual-track approach: more openness toward key raw materials, and greater caution toward finished-product imports. For the market, there are several developments worth watching. First, whether India will further reduce import duties on scrap and ferroalloys on a long-term basis, or even establish a more stable policy framework for raw material support. Second, whether chromium will be formally included in the country’s critical mineral system, thereby strengthening resource security. Third, whether India will step up anti-dumping, anti-circumvention, and origin-related scrutiny, especially against third-country rerouting paths. If these directions gradually materialize, they could reshape competition in India’s stainless steel market, alter its import structure, and even change broader resource flows across Asia. Conclusion Overall, ISSDA’s latest public stance does not simply signal another trade friction issue. It reflects the broader priorities of India’s stainless steel industry as it enters a new stage: securing raw material supply and cost competitiveness for expansion, while also preventing low-priced external supply from undermining domestic industry during a critical window. Whether India’s stainless steel story can evolve from one of consumption growth into one of manufacturing rise may depend not only on the pace of demand growth itself, but also on whether the government can build a policy mix that effectively balances resources, tariffs, and trade protection in a way that genuinely supports domestic industrial upgrading. Written by: Bruce Chew | bruce.chew@metal.com +601167087088

[SMM Stainless Steel Daily Review] SS Futures Struggled to Break Out of Rangebound Trading, Spot Market Held Prices Steady While Actively Shipping SMM News, March 13: SS futures remained in the doldrums. However, after opening higher in the night session, SS fluctuated downward, with the pace of pullback accelerating further in the afternoon, and closed at 14,190 yuan/mt. In the spot market, affected by fluctuations in futures, quotations were largely stable, with limited changes during the week. Although the recovery in downstream demand and cargo pick-up of previous orders provided support, and stainless steel social inventory stopped rising and pulled back this week, market expectations remained mediocre, with merchants mainly holding prices steady while actively making shipments. The most-traded SS futures contract fluctuated stronger. As of 10:15 a.m., SS2605 stood at 14,275 yuan/mt, down 15 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 245-445 yuan/mt. In the spot market, cold-rolled 201/2B coils in Wuxi were all basically stable; for cold-rolled trimmed 304/2B coils, the average prices in both Wuxi and Foshan were basically stable; cold-rolled 316L/2B coils in Wuxi were basically stable; hot-rolled 316L/NO.1 coils were quoted basically stable in Wuxi; and cold-rolled 430/2B coils in both Wuxi and Foshan were basically stable. Entering the traditional peak consumption season of “Golden March and Silver April,” the stainless steel market ushered in a window for demand recovery, with downstream end-users gradually recovering and inquiry and purchase activity having picked up notably recently. However, stainless steel spot prices overall remained basically stable, with no obvious fluctuations. End-user procurement mainly followed rigid demand, and a full-scale peak-season boom had yet to emerge, while wait-and-see sentiment still lingered in the market. On the futures side, affected by Yi...

◼ At the beginning of 2026, Musk’s SpaceX plan for 100 GW of annual space PV capacity ignited the A-share market, with multiple concept stocks rising by more than 30 in a single month. At the same time, however, earnings previews from leading PV companies generally showed losses for 2025, and industry fundamentals remained in a deep winter. Behind the stark divergence between the speculative frenzy around the Musk-SpaceX concept and the earnings trough, is the market overly expecting a “second growth curve,” or is this a genuine signal of industrial transformation? ◼ As the global PV industry moves from rapid expansion into a new stage of rational development, its value has gone beyond that of clean energy alone: Against the backdrop of explosive growth in AI computing power driving massive electricity demand, compounded by energy security anxiety triggered by geopolitical conflict in the Middle East, developing PV may become a core strategic choice for countries to achieve their “dual-carbon” goals, build autonomous and controllable energy systems, and reduce electricity costs for end-users. ◼ Since the escalation of the U.S.-Iran conflict at the end of February, the world’s four major benchmark crude oil prices have entered a rapid upward trajectory. Before the outbreak of the conflict, oil prices had remained broadly stable; however, starting on March 2, as the fighting expanded and spread to the Persian Gulf, oil prices immediately entered a sharp uptrend. Note: Shanghai crude oil prices are converted based on the settlement-date exchange rate of 1:0.15. Source: Public information, SMM. ◼ Although the impact borne by different regions varies due to differences in energy mix, geopolitical location, and policy response, the surge in imported crude oil costs driving a broad rise in energy prices has become a common challenge facing all countries. Europe is a case in point. Although Europe’s direct dependence on Middle Eastern crude oil was not high, at only about 5 according to data from energy market intelligence firm Kpler, it remained highly dependent on the region for refined products such as diesel and aviation kerosene, as well as liquefied natural gas. Disruptions in the Strait of Hormuz caused by the conflict directly pushed up Europe’s terminal energy prices—fuel prices at gas stations across the region surged, and natural gas prices broke above EUR 60 per megawatt hour on the 9th, reaching a new high since 2022. The continued rise in energy prices is bound to transmit into broader areas of the economy, increasing overall inflationary pressure and once again underscoring the importance of building secure and controllable energy systems. Accelerating the Clean Transition of the Global Energy Mix, the PV Industry Advances Toward High-Quality Development ◼ The International Energy Agency (IEA) forecasts that, despite economic pressure, global electricity demand momentum remains strong in 2025, with growth rates in 2025 and 2026 expected to be 3.3% and 3.7%, respectively. Data from 2020 to 2025 showed that the global power market followed a trajectory of continued overall growth alongside structural transition toward cleaner energy , with the share of renewable energy sources such as solar rising significantly, although fossil fuels still accounted for the dominant share. ◼ According to the IEA’s Net Zero Emissions Scenario, solar power’s share in the energy mix is expected to rise from less than 2% at present to 12% in 2035 and 28% in 2050. This means PV installations are still far from reaching their ceiling, with substantial room for future growth. ◼ The past five years marked a critical period in which the global PV market shifted from rapid expansion toward rational development. The IEA forecasts that total global new PV installations over the next five years will reach about 3.68 TW, accounting for nearly 80% of new renewable energy additions over the same period, and are expected to become the world’s largest renewable energy source by the end of 2030. This is mainly due to its widening economic advantages—by 2024, the cost of solar PV power generation had already fallen 41% below the cheapest fossil fuel alternative, and these cost advantages are driving rapid growth in both PV installations and power generation share. Source: IEA, public information, SMM. ◼ As a key carrier of PV installations, especially the backbone of utility-scale power plants, solar panel mounting bracket installations are expected to maintain annual average growth of 5%-6% alongside installation growth. Specifically, to achieve annual average new PV installations of 500-600 GW, corresponding module demand is estimated at about 550-700 GW based on the capacity ratio. Assuming a conventional 1:1 module-to-bracket configuration, the annual average installation scale of brackets required for utility-scale PV plants alone would reach at least 250-300 GW. Source: public information, SMM. Escalating Challenges Reshape the Development Logic of the Global PV Market ◼ The PV industry is undergoing resonating internal and external pressures. Internally, the global economic slowdown has become intertwined with social issues, while the industry itself has entered a rational development stage after rapid expansion, making slower installation growth a certain trend. Externally, global trade frictions continue to intensify, with the US, Europe, and other regions erecting nearly insurmountable cost gaps through barriers such as anti-dumping and countervailing duties as well as local content requirements. Challenge 1: Global Trade Frictions and Escalating Trade Barriers ◼ In recent years, countries have introduced a series of policies to build PV trade barriers and reshape the global competitive landscape of the industry. The US imposed “double anti-” duties of as much as 3,403.96% on PV products from four Southeast Asian countries, South Africa raised module tariffs to 10%, and Brazil increased out-of-quota tariffs sharply from 9.6% to 25% through a quota system. Market access requirements for PV in India and Türkiye have also become increasingly stringent. Meanwhile, new supply chain control rules represented by the EU’s Net-Zero Industry Act (NZIA) have extended trade barriers deeper into the industry chain. By setting red lines on “third-country dependence,” they have established quantitative standards for supply chain restructuring. This series of changes has reshaped the competitive dimensions of the international PV industry and significantly raised the threshold for PV product imports and exports. Source: public information, SMM. Challenge 2: New Dynamics in the PV Market, with Incentive and Restrictive Policies Coexisting Source: public information, SMM. Outside China Enterprises Pursue Multi-Dimensional Breakthroughs Through Internal and External Efforts ◼ The practices of solar panel mounting bracket enterprises in the US, India, and other countries show that the key to coping with policy shifts overseas lies in combining “service-oriented” and “high-value” strategies. First, vertically extending from single-equipment sales to a service ecosystem covering the entire life cycle. Second, deepening horizontally by continuously optimizing business structure and extracting value from higher value-added segments. Solution 1: Launch Dedicated Plans Closely Aligned with Government Policies and Local Demand ◼ The global PV industry has now entered a new stage deeply reshaped by both market forces and policy. The growth logic of enterprises is shifting from the past single dimension of relying on technology iteration and cost declines to multi-dimensional competition closely integrating complex policy environments with localized demand. Against this backdrop, the key to corporate success lies in accurately interpreting policy intentions and launching development plans aligned with both market and policy. Tata Power Renewable Energy Limited (TPREL) precisely aligned with India’s “PM Surya Ghar: Muft Bijli Yojana” and launched the dedicated “solar for every home” plan while continuing to provide customized PV solutions. In Q1 FY2026, it added 220 MW of new rooftop PV installations, surging 416% YoY. TPREL also actively responded to local manufacturing policies by establishing 4.3 GW of solar cell and module capacity, ensuring supply while avoiding import tariffs. Through the synergy of “policy response + local capacity + customized services,” TPREL has effectively translated policy dividends into market competitiveness and steadily consolidated its leading position in India’s PV market. Solution 2: Use Acquisitions as a Link to Integrate Resources and Extend from Single Products to the Entire Industry Chain ◼ Competition in the global PV industry has fully escalated into a contest of entire industry chain system integration capabilities, and enterprises’ growth engines are shifting from past reliance on advantages in a single segment to a new model of providing integrated solutions through resource integration. In 2025, Nextracker used acquisitions as the core to integrate resources across the full chain, successively acquiring foundation engineering firms such as Solar Pile International and Ojjo, module supporting firms such as Origami Solar, and electrical system firms such as Bentek, thereby building a full-chain product matrix spanning structural, electrical, and digital solutions. Its performance continued to surge, with revenue rising from $1.9 billion in FY2023 to $3.4 billion in the trailing twelve months ended September 2025. It ultimately announced its transformation into a comprehensive energy solutions provider by renaming itself Nextpower, targeting revenue of more than $5.6 billion in FY2030. This strategy enabled its successful transformation from a single-product supplier into an entire industry chain service provider, solidifying its leading position in the global market. Solution 3: Optimize Business Structure ◼ Trade protectionism in the current PV market continues to intensify, with various trade barriers being layered on one after another. In response to this challenge, PV enterprises can achieve the dual objectives of “compliant operations” and “market retention” through business structure optimization. To avoid the equity constraints on FEOC under the US OBBB Act, Canadian Solar Inc. initiated a US business restructuring with its controlling shareholder CSIQ: it established two new joint ventures to separately manage PV and energy storage businesses, with its own stake set at 24.9% to precisely meet compliance requirements. At the same time, it transferred out 75.1% equity in three overseas plants supplying the US market, receiving a one-off consideration of 352 million yuan. This move enabled Canadian Solar Inc. to retain earnings from the US market through dividends and rental income. In the first three quarters of 2025, it achieved net profit of 990 million yuan, while large-scale energy storage shipments rose 32% YoY. After the adjustment, it focused on strengthening its advantages in non-US markets and successfully stabilized its global business layout with a compliant structure, providing a typical model for the industry in addressing trade barriers. ◼ For Chinese enterprises, in the face of trade frictions and overseas capacity gaps, they need to break through via three paths—“building plants near core markets, reducing costs and improving efficiency through technological innovation, and coordinating both within and outside the industry chain”— by pursuing localized deployment in Southeast Asia, Mexico, and other regions to avoid frequent trade frictions; promoting standardized production and high-end product R&D to enhance competitiveness; and building a “China + overseas” dual-circulation supply chain to stabilize costs. However, overseas expansion still faces challenges such as land and environmental protection costs, talent shortages, and supply chain fluctuations, requiring enterprises to conduct sound risk assessments, leverage policy support, and improve overseas investment service systems. Only by deeply integrating scientific capacity deployment, technological innovation, and industry chain coordination can the mounting bracket industry upgrade from “Made in China” to “Globally Intelligent Manufacturing” and achieve long-term development under the “dual carbon” goals. New Requirements Under the 15th Five-Year Plan, New Topics for PV Enterprises ◼ In a global market full of uncertainties, the consistency and strength of domestic policy have provided fertile ground for the growth of China’s solar panel mounting bracket enterprises. The newly released 15th Five-Year Plan further clarified China’s path for energy and industrial development. On the one hand, the construction of a new-type power system centered on consumption capacity has been listed as a priority task, and green manufacturing and full life cycle management have been formally incorporated into the assessment system. On the other hand, technological self-reliance and self-strengthening together with new quality productive forces have replaced scale competition as the main line of the new development stage. This series of changes signals that the country is driving a profound shift from “competing on capacity” to “competing on system value,” with the core goal of achieving autonomous and controllable energy structure. It is estimated that after the Two Sessions, various departments will successively roll out detailed plans to promote the full implementation of the blueprint. ◼ Key implementation measures include: 1) establishing a “dual controls” system for total carbon emissions and carbon intensity, while improving incentive and restraint mechanisms; 2) vigorously developing non-fossil energy and promoting the efficient use of fossil energy, while strengthening the construction of a new-type power system to ensure stable supply of green electricity; 3) applying both “addition and subtraction” by fostering green and low-carbon industries and promoting energy conservation and carbon reduction in key industry; 4) in addition, accelerating the green transformation of production and lifestyles to consolidate the foundation for green development. ◼ From the perspective of regional development layout, during the 15th Five-Year Plan period, China’s PV industry will show characteristics of regional coordination: north-west China will become the strategic focus by virtue of its natural endowments, exporting electricity through cross-provincial green electricity trading and other means to achieve two-way matching between energy resources and power load; eastern regions, by contrast, will focus on local consumption by high-energy-consuming industries and zero-carbon industrial parks. Source: public information, SMM. ◼ SMM forecasts that China’s new PV installations are expected to reach 208 GW in 2025 and continue growing at an annual average rate of 9% over the next five years, exceeding 292 GW by the end of the 15th Five-Year Plan period. Utility-scale PV will remain dominant, with its installation share staying above 50%. Based on the same logic, we estimate that China’s PV installation market will maintain annual incremental growth of at least 100-120 GW. Source: public information, SMM. ◼ Focusing on China’s steel consumption market for solar panel mounting brackets, SMM estimates that annual steel consumption in China’s PV mounting bracket sector will average about 4-4.5 million mt from 2026 to 2030, accounting for about 30% of total steel consumption in the PV industry over the same period (based on 2026 data). Note: only installation demand for utility-scale PV mounting brackets is included, excluding distributed steel structures, replacement from existing asset depreciation, and exports. Source: public information, SMM. SMM Ferrous Consulting Based on its understanding of the global steel industry chain and regional markets, as well as its strong industry database and network resources, SMM is committed to providing clients with consulting services across the upstream, midstream, and downstream industry chain. Services include market supply and demand research and forecasts, market entry strategies, competitor cost research, and more, covering end-use industry from iron ore, coal, coke, and steel. SMM Ferrous has successfully served more than 300 Fortune Global 500 companies, China Top 500 companies, central state-owned enterprises, state-owned enterprises, publicly listed firms, and start-ups. Data Source Statement: Except for public information, all other data are processed and derived by SMM based on public information, market communication, and SMM’s internal database models, and are for reference only and do not constitute decision-making advice. *This report is an original work and/or compilation work exclusively created by SMM Information & Technology Co., Ltd. (hereinafter referred to as “SMM”), over which SMM lawfully enjoys copyright, protected by the Copyright Law of the People’s Republic of China and other applicable laws, regulations, and international treaties. Without written permission, it may not be reproduced, modified, sold, transferred, displayed, translated, compiled, disseminated, or otherwise disclosed to any third party or licensed to any third party for use in any form. Otherwise, upon discovery, SMM will pursue legal liability for infringement by legal means, including but not limited to claims for breach of contract liability, disgorgement of unjust enrichment, and compensation for direct and indirect economic losses. All content contained in this report, including but not limited to news, articles, data, charts, images, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, and any or all other information, is protected by the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, the Anti-Unfair Competition Law of the People's Republic of China, and other relevant laws and regulations, as well as applicable international treaties relating to copyright, trademark rights, domain name rights, proprietary rights in commercial data and information, and other rights, and is owned or held by SMM and its relevant rights holders. Without prior written permission, no organization or individual may reproduce, modify, use, sell, transfer, display, translate, compile, disseminate, or otherwise disclose the above content to any third party or permit any third party to use it in any form whatsoever. Otherwise, upon discovery, SMM will pursue legal action to hold the infringing party liable, including but not limited to requiring the assumption of liability for breach of contract, disgorgement of unjust enrichment, and compensation for direct and indirect economic losses. The English translation of the above text is:

Capacity side, according to incomplete statistics, China’s alkaline electrolyzer market remained at 43.77 GW and the PEM electrolyzer market remained at 2.7 GW, with no new capacity added. No offline delivery information was available this week. Project-related developments: Jiangsu Guofu Hydrogen Energy Technology Equipment Co., Ltd.: Its indirectly wholly owned subsidiary, Xinjiang Guofu Mingzhi Hydrogen Energy Technology Co., Ltd., entered into a sales agreement with independent third party Hefei Zhongke Hecheng Green Energy Co., Ltd. for hydrogen production equipment for a green fuel base demonstration project featuring 20,000 mt of green electricity-based hydrogen production and flexible synthetic ammonia. The total contract value exceeded 55 million yuan. Under the agreement, Guofu Mingzhi will supply the client with six sets of 1,000 Nm³/hour alkaline electrolyzers and auxiliary equipment, such as rectifier transformers, rectifier cabinets, and separation and purification equipment. Xizang Zangqing Energy Equipment Co., Ltd.: A tender announcement was officially issued for the EPC project covering design and construction of Phase I of the zero-carbon intelligent equipment base for the new energy industry of green hydrogen and green methanol in the Zangqing Industrial Park. It is understood that the project mainly includes: an annual output of 100 sets of 1,500 Nm³-2,000 Nm³ alkaline electrolyzers; a 500 MW/year production line for plateau-type PEM electrolyzers; a standardized production line for a 40,000 t/d methanol synthesis unit and components; an annual output of 120 sets of 500 kW integrated hydrogen-oxygen heat and power co-generation units; and an annual output of 50 sets of 500 kg/day skid-mounted integrated methanol hydrogen refueling station equipment. Renewable Green Hydrogen Energy (Inner Mongolia) Co., Ltd.: An announcement was issued on the signing of the EPC general contract for the Phase I, Stage I green ammonia project of the integrated 800,000 mt/year wind and solar power-hydrogen-ammonia project with Donghua Technology. It is understood that the contract was signed by both parties on March 5, with a contract value of 2.026 billion yuan (provisional estimate), and the construction period (mechanical completion) will run until June 18, 2028. Donghua Engineering Technology Co., Ltd. will mainly undertake the design, procurement, construction, operation assurance services, and guidance for startup and commissioning of the EPC project. Tangshan Haitai New Energy Technology Co., Ltd. : During the visit by the deputy secretary of the Abaqa Banner Committee in Inner Mongolia, the two sides further deepened cooperation on the 10 GW integrated wind and solar power-to-hydrogen project, working together to advance the project’s early commencement and commissioning. Maoming Binhai New Area Urban Investment Development Co., Ltd.: A public notice was issued on the shortlisted candidates for the construction of Phase I of the supporting road network project for the Green Chemical and Hydrogen Energy Industrial Park in Maoming Binhai New Area. The first shortlisted candidate was CCCC Fourth Harbor Engineering Co., Ltd., with a bid price of 98.210593 million yuan; the second shortlisted candidate was Hebei Xiangda Road & Bridge Engineering Co., Ltd., with a bid price of 98.23076 million yuan; and the third shortlisted candidate was Jiangxi Sitong Road & Bridge Construction Group Co., Ltd., with a bid price of 98.008929 million yuan. Fujian Tianchen Yaolong New Materials Co., Ltd.: A tender announcement was issued for the equipment procurement project for the hydrogen purification unit of the cyclohexanone technology upgrade and renovation project. It is understood that the project plans to procure one set of hydrogen purification unit equipment, with a maximum bid price of 7 million yuan. Inner Mongolia Juliyong Hydrogen New Energy Technology Co., Ltd.: Its new-type high-density, low-pressure solid-state hydrogen energy power R&D and industrialisation project was filed. The project will be constructed in Ordos City—Ordos Airport Logistics Park—Phase II, First Floor, Standardised Factory Buildings, Ordos Comprehensive Bonded Zone, Ejin Horo Banner, Ordos City, Inner Mongolia. The project is expected to be built in two phases, with a total investment of approximately 120 million yuan. It requires 10 million yuan in policy support funding, with Phase I investment of 40 million yuan and Phase II investment of 80 million yuan. The construction period is three years, and after completion, the project is expected to generate annual profit of 30 million yuan. Policy Review 1. At the press conference held during the fourth session of the 14th National People's Congress, Zheng Shanjie, Chairman of the National Development and Reform Commission, said that China would focus on developing the “six emerging pillar industries” and the “six future industries.” Among them, “green hydrogen energy and nuclear fusion energy” were included in the category of future industries. 2. The People's Government of Shandong Province issued the Implementation Plan on Supporting Jining in Accelerating Green and Low-Carbon Transformation and Building New Advantages in High-Quality Development. The document proposed supporting Jining in fostering and developing emerging industries and future industries such as hydrogen energy production, storage, and transportation, and supporting the construction of future industry acceleration parks; advancing R&D breakthroughs in key technologies such as hydrogen fuel cell vessels, building a leading inland new energy vessel manufacturing base in China; and supporting technological innovation and the promotion and application in fields such as hydrogen energy. 3. With the approval of the National Energy Administration, the Standardisation Technical Committee for the Hydrogen Energy Sector of the Energy Industry was established in Beijing. The establishment of the committee aims to improve the industry standard system, lead technological innovation, and regulate market order. Enterprise Updates Qinghang Times (Shenzhen) Technology Co., Ltd. : Qinghang Times was established on January 5, 2026, with a registered capital of 1 million yuan and legal representative He Rongjie. It was founded by a Tsinghua University master's and doctoral team, received support from Tsinghua innovation and entrepreneurship platforms such as Tsinghua i-Space and Tsinghua Chuang+, and was selected for the Sci-Tech Innovation Light “Future Sci-Tech Entrepreneur Program.” Through its technical solution combining liquid hydrogen storage and a high-temperature PEM hydrogen-electric coupling system, it increased aircraft driving range by more than 10 times and payload by 2–3 times. Recently, it completed seed-round financing worth several million yuan, with the investor undisclosed. Shenzhen Hydrogen Energy Co., Ltd.: Completed A+ round financing, with Shenzhen Energy Investment as the investor. Anhui Shuishui New Energy Technology Co., Ltd. : Anhui Shuishui Technology completed an A-round financing of over 100 million yuan, led by NIO Capital. This round of funding will be primarily used to fulfill large orders, increase R&D reserves, construct new factories, and support daily operations, in order to drive the integration and upgrading of the industry chain. SPIC Green Energy Co., Ltd.: held talks with Beijing Energy International Holding Co., Ltd., with both sides focusing on areas such as the construction of green electricity transmission channels into Beijing and pipeline transportation of green hydrogen, and conducting in-depth exchanges on deepening cooperation. Beijing Hydrosys Technology Co., Ltd. : helped successfully complete hydrogen refueling at Yunnan’s first integrated “PV–green electricity–hydrogen” refueling station. China Classification Society ​​​​​​​: supported the successful completion of the 16,136 TEU methanol dual-fuel container ship project. China Classification Society​​​​​​​​​​​​​​: the “COSCO 9802,” a single methanol-powered chemical tanker for which it carried out drawing approval and construction inspection, was successfully delivered. ​​Patent Applications​​ 1. Shanghai Institute of Ceramics, Chinese Academy of Sciences​​ (China) disclosed patent CN2025110028, developing a ceramic-based anion exchange membrane with a laboratory-tested lifespan of 80,000 hours. ​​2. Johnson Matthey​​ (UK) filed patent WO2025109876, disclosing a Fe-Ni-Mo ternary non-precious metal catalyst formulation with activity close to platinum-based materials. Technology Footprint/Technical Specifications​​ 1. A team from Xi’an Jiaotong University and Peking University jointly developed a new-type osmium-based catalyst, significantly improving the efficiency and economics of hydrogen production from AEM water electrolysis and supporting the large-scale deployment of low-cost green hydrogen. 2. Johnson Matthey and Syensqo achieved efficient recycling and reuse of platinum group metals and ionomers in PEM fuel cells and electrolyzers, substantially reducing the carbon footprint. 3.​​Research teams from the School of Electrical Engineering of Xi’an Jiaotong University and the State Key Laboratory of Electrical Materials and Electrical Insulation successfully developed the Ru/Ti3C2Ox@NF bifunctional electrocatalyst for seawater electrolysis. 4. The group standard Technical Specification for Wind and Solar Power, PV+ESS, and Green Electricity Coupled Electrolysis Hydrogen Production (No. T/CIEP 0272—2025) was released and implemented by the China Industrial Environmental Protection Promotion Association. Zhongneng Dayou Energy Technology Co., Ltd. successfully developed a 100 kW-class PEM electrolyzer hydrogen production multi-field coupling test device. 5. GKN Powder Metallurgy announced that it had developed a next-generation high performance, high-porosity, high-purity porous transport layer (HP-PTL) for proton exchange membrane (PEM) electrolysis.

[SMM Aluminum Morning Meeting Summary: The SHFE/LME Price Ratio Continued to Weaken, and Aluminum Prices Were Expected to Fluctuate at Highs in the Short Term] Against the backdrop of continued tightening LME liquidity, LME aluminum still had upward momentum, with strong support from overseas prices, and the backwardation structure was expected to persist in the short term. China was in a phase of high inventory + weak fundamentals, and its upward momentum was clearly weaker than that outside China. Amid diverging domestic and external drivers, the SHFE/LME price ratio was expected to continue weakening, and aluminum prices were expected to continue fluctuating at highs in the short term.