JSL has successfully commissioned a new 1.2 million tonnes per annum (MTPA) stainless steel melt shop (SMS) in Indonesia ahead of schedule through a joint venture. This milestone brings the company's total annual melting capacity to 4.2 MTPA, reinforcing its raw material security and integrated growth strategy. Concurrently, JSL announced a fresh investment of approximately $108 million (₹900 crore) to augment its cold rolling capacities at its Hisar and Kharagpur facilities in India, expected to be operational by Q2 FY28. These combined upstream and downstream expansions are tailored to produce high-value, thinner cold-rolled products, strategically positioning the company to target a global sales volume of 3.5 MTPA by FY29 with a projected double-digit compound annual growth rate.

[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

SMM Nickel News, March 26: Macro and Market News: (1) On March 25, COSCO SHIPPING Lines issued a service notice announcing the immediate resumption of new bookings for services from the Far East to the following Middle East countries (dry containers): the UAE, Saudi Arabia, Bahrain, Qatar, Kuwait, and Iraq. The resumption of shipments did not mean that COSCO SHIPPING container vessels could pass through the Strait of Hormuz. (2) In the early hours of March 25, Tehran time, Iran's Permanent Mission to the United Nations said in a statement on social media that non-hostile vessels could safely pass through the Strait of Hormuz in coordination with relevant Iranian authorities, provided that the countries to which they belong or with which they are associated neither participate in nor support acts of aggression against Iran, and fully comply with the announced safety and security regulations. Spot Market: On March 26, the SMM price of #1 refined nickel rose by 1,550 yuan/mt from the previous trading day. In terms of spot premiums, the average premium for Jinchuan #1 refined nickel was 5,400 yuan/mt, down 750 yuan/mt from the previous trading day; domestic mainstream electrodeposited nickel was at -400-400 yuan/mt. Futures Market: The most-traded SHFE nickel contract (2605) opened sharply higher in last night's session and then fluctuated downward, closing the morning session today at 135,250 yuan/mt, up 0.50%. Policy expectations that Indonesia may impose a nickel export tax, together with firm ore prices on the raw material side and easing macro sentiment, jointly drove nickel prices to rebound. Nickel prices are expected to hold up well in the short term, with the core trading range of the most-traded SHFE nickel contract at 133,000-143,000 yuan/mt.

Precious metals staged their first coordinated rally in nearly two weeks on Tuesday as the prospect of a diplomatic resolution to the U.S.-Iran conflict continued to lift market sentiment and weaken the dollar.

Silver has seen one of the sharpest pullbacks in recent years within just a few weeks. From the high of US$97.30 on March 2, the price fell to US$61.21 by March 23, losing around 37%. For the market, this was an abrupt break from the previous momentum.

Recently, Mingyang Hydrogen’s MYH-K-1000 electrolyzer completed the authoritative evaluation under the China Hydrogen Alliance’s “Leader Program” and received the official test report. With multiple industry-leading performance indicators, it has established a new benchmark for alkaline electrolyzers adapted to fluctuating new energy scenarios, marking a major technological milestone for the company in the field of hydrogen energy equipment. This product is the first 1,000 Nm³/h-class alkaline electrolyzer on the China Hydrogen Alliance’s field-testing platform to achieve the “15th Five-Year Plan” target of 20%–120% ultra-wide flexible load regulation . At the 20% minimum load, it can stably control hydrogen content in oxygen to within 1.5%, enabling long-term stable operation. It also features rapid load response capability of 5%/s to 10%/s. Its core performance is industry-leading and perfectly suited to the flexible operating conditions of wind and solar power generation, providing robust support for the development of the green fuel industry. The test certification presentation ceremony was held at Mingyang Hydrogen’s Beijing Center. Yu Tianxiao, Director of the Quality Value Center at Guoneng Hydrogen Innovation and Deputy General Manager of Hydrogen Testing Technology, presented the certification report to Pan Yongle, Executive Director and CEO of Mingyang Hydrogen, and both parties witnessed this important moment together. Rigorous Field Testing Validates Outstanding Performance, Strong Results Under Extreme Cold Conditions According to the alliance’s field-test data, under 100% rated load, the MYH-K-1000 kept hydrogen content in oxygen below 0.5% and successfully passed load ramp-up and ramp-down tests at 3%/s and 5%/s. Under the ultra-low load of 20%, hydrogen content in oxygen remained compliant, while DC power consumption was as low as 3.85 kWh, achieving efficient and stable operation. This long-duration test was conducted throughout in an outdoor environment at minus 20°C . The product still demonstrated excellent cold and hot start capabilities, as well as high reliability, high safety, and fully flexible operating characteristics, overcoming the longstanding low-temperature operating limitations of traditional electrolyzers and enabling adaptation to more extreme application scenarios. Breakthroughs in Core Technology Innovation Set a New Industry Benchmark This electrolyzer adopts advanced integrated die-casting technology, delivering high consistency in its internal structure. The area of its electrolysis unit is 75% larger than that of traditional designs, and it overcomes sealing challenges on the basis of zero-electrode-gap technology, significantly improving product performance and production efficiency and setting a new technological benchmark for the industry. Company Statement: Continuous Innovation-Driven Development and Deepening Commitment to Hydrogen Energy Equipment Pan Yongle, CEO of Mingyang Hydrogen, stated that this certification is the result of the team’s technological breakthroughs. The company will continue to uphold the philosophy of “innovation-driven, green future,” further increase R&D investment, launch more high performance products, provide global clients with high-quality hydrogen energy solutions, and support the industry’s high-quality development.

[SMM Tin Brief Commentary: SHFE Tin Stopped Falling and Rebounded, Closing Up 2.94% as Macro Pressure and Bottom Support Vied Against Each Other]

[SMM Stainless Steel Daily Review] SS Futures Stopped Falling and Rebounded, Stainless Steel Spot Quotations Rose in Tandem SMM News, March 20: SS futures stopped falling and rebounded. Base metals futures generally recovered, with SS futures showing particularly strong performance and basically recouping this week’s losses, closing at 14,160 yuan/mt by the midday close. In the spot market, driven by the strong rebound in SS futures and coupled with stainless steel mill agents’ efforts to hold prices firm, stainless steel retail quotations also moved higher accordingly; supported by improving market sentiment, both inquiry activity and trading picked up. High-grade NPI prices remained in the doldrums, and the steel mill tender price for high-carbon ferrochrome was announced below market expectations, leaving weak cost support for stainless steel. The most-traded SS futures contract stopped falling and recovered. At 10:15 a.m., SS2605 was quoted at 14,150 yuan/mt, up 220 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the 220-420 yuan/mt range. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose by 50 yuan/mt; for cold-rolled trimmed 304/2B coil, the average price in Wuxi rose by 100 yuan/mt, and the average price in Foshan rose by 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi was flat; hot-rolled 316L/NO.1 coil quotations in Wuxi were unchanged; cold-rolled 430/2B coil in both Wuxi and Foshan held steady. Entering the traditional September-October peak season, although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and procurement only...

SMM Morning Meeting Summary: Overnight, LME copper opened at $11,816/mt. After dipping to $11,798/mt in early trading, its center rose sharply to a high of $12,395/mt, then hovered at highs, and finally closed at $12,221/mt, up 3.27%. Trading volume reached 52,000 lots, and open interest stood at 292,000 lots, down 944 lots from the previous trading day, mainly reflecting bears cutting positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 95,010 yuan/mt. After the opening, its center moved higher to a high of 95,900 yuan/mt, after which copper prices maintained a fluctuating trend at highs. Near the close, it dipped to 94,530 yuan/mt and finally closed at 93,840 yuan/mt, up 2.12%. Trading volume reached 120,000 lots, and open interest stood at 198,000 lots, down 6,741 lots from the previous trading day, mainly reflecting bears cutting positions throughout the day.

[SMM Stainless Steel Daily Review] SS Futures Continued to Pull Back, Stainless Steel Spot Quotes Were Lowered SMM News on March 19: SS futures extended their further downward pullback. Against the backdrop of hawkish remarks from the US Fed and escalating geopolitical conflicts, non-ferrous metal futures generally moved lower, with SS also declining in tandem and closing at 13,935 yuan/mt by the midday break. In the spot market, continued declines in SS futures significantly weakened market confidence; coupled with the recent pullback in high-grade NPI prices, market expectations for cost support also softened. In a market where transactions had already been sluggish this week, inquiries and deals weakened further; in addition, March supply remained high, prompting traders to lower their quotes for 304 stainless steel during the day. However, supported by news yesterday that steel mills were holding prices firm, 200-series stainless steel rose against the trend, with 201 stainless steel prices moving higher. Further attention should still be paid to downstream end-user purchase conditions. The most-traded SS futures contract fell and pulled back. As of 10:15 a.m., SS2605 was quoted at 13,930 yuan/mt, down 100 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 340-540 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose 50 yuan/mt; for cold-rolled trim-edge 304/2B coil, the average price in Wuxi fell 150 yuan/mt and in Foshan fell 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi fell 200 yuan/mt; for hot-rolled 316L/NO.1 coil, Wuxi quotes fell 100 yuan/mt; cold-rolled 430/2... in both Wuxi and Foshan.