JSL has successfully commissioned a new 1.2 million tonnes per annum (MTPA) stainless steel melt shop (SMS) in Indonesia ahead of schedule through a joint venture. This milestone brings the company's total annual melting capacity to 4.2 MTPA, reinforcing its raw material security and integrated growth strategy. Concurrently, JSL announced a fresh investment of approximately $108 million (₹900 crore) to augment its cold rolling capacities at its Hisar and Kharagpur facilities in India, expected to be operational by Q2 FY28. These combined upstream and downstream expansions are tailored to produce high-value, thinner cold-rolled products, strategically positioning the company to target a global sales volume of 3.5 MTPA by FY29 with a projected double-digit compound annual growth rate.

[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

The operating rate of major copper cathode rod enterprises in China stood at 81.51% last week (March 13–March 19), marking the fourth consecutive week of MoM improvement since the Chinese New Year, with industry sentiment continuing to recover. The strong rebound in the operating rate in this round was mainly driven by two factors: first, the relatively weak operating rates of secondary copper rod enterprises, coupled with the price difference between copper cathode and copper scrap remaining at a relatively low level, significantly weakened the substitution effect between copper cathode and copper scrap, leaving more market room for copper cathode rod; second, improving orders for downstream wire and cable and enamelled wire boosted a faster drawdown in enterprises' finished product inventories. As copper prices broke above low-level support, downstream procurement sentiment continued to heat up, and new orders for copper cathode rod enterprises showed a pattern of concentrated volume release. Most enterprises reported that their production pace could no longer keep up with shipment progress, and some had already begun to proactively control the pace of taking orders to ensure contract fulfillment. From the downstream industry perspective, wire and cable as well as enamelled wire enterprises also benefited from the pullback in copper prices, with operating rates steadily rebounding, further boosting demand for copper rod. Inventory side, although the pullback in copper prices boosted enterprises' willingness to restock, constrained by limited room for capacity release, enterprises did not excessively stockpile on dips and mostly maintained normal production raw material reserves. Meanwhile, due to continued downstream pick-up of goods, enterprises' capacity was unable to fully match order demand, accelerating the drawdown of finished product inventories. Enterprises Raise Processing Fees and Increase Margin Requirements to Control Risks After copper prices pulled back sharply, downstream purchase willingness increased significantly, and order concentration rose markedly. To reasonably control the pace of taking orders, some enterprises urgently raised processing fees. At the same time, affected by the increased uncertainty in the pace of cargo pick-up caused by concentrated downstream order placement, as well as the continued decline in copper prices, enterprises became more concerned about the default risk of earlier high-priced orders, and some enterprises simultaneously increased margin ratios to strengthen risk control. Looking ahead, with copper prices rising at present, downstream procurement sentiment has clearly weakened. To ensure stable deliveries, copper cathode rod enterprises are expected to maintain relatively high operating loads. Although rigid demand is gradually being fully released, against the backdrop of low finished product inventories, enterprises will still maintain high operating rates to replenish inventory. Accordingly, SMM expects the operating rate of China's copper cathode rod enterprises to fluctuate at highs in March.

Recently, Mingyang Hydrogen’s MYH-K-1000 electrolyzer completed the authoritative evaluation under the China Hydrogen Alliance’s “Leader Program” and received the official test report. With multiple industry-leading performance indicators, it has established a new benchmark for alkaline electrolyzers adapted to fluctuating new energy scenarios, marking a major technological milestone for the company in the field of hydrogen energy equipment. This product is the first 1,000 Nm³/h-class alkaline electrolyzer on the China Hydrogen Alliance’s field-testing platform to achieve the “15th Five-Year Plan” target of 20%–120% ultra-wide flexible load regulation . At the 20% minimum load, it can stably control hydrogen content in oxygen to within 1.5%, enabling long-term stable operation. It also features rapid load response capability of 5%/s to 10%/s. Its core performance is industry-leading and perfectly suited to the flexible operating conditions of wind and solar power generation, providing robust support for the development of the green fuel industry. The test certification presentation ceremony was held at Mingyang Hydrogen’s Beijing Center. Yu Tianxiao, Director of the Quality Value Center at Guoneng Hydrogen Innovation and Deputy General Manager of Hydrogen Testing Technology, presented the certification report to Pan Yongle, Executive Director and CEO of Mingyang Hydrogen, and both parties witnessed this important moment together. Rigorous Field Testing Validates Outstanding Performance, Strong Results Under Extreme Cold Conditions According to the alliance’s field-test data, under 100% rated load, the MYH-K-1000 kept hydrogen content in oxygen below 0.5% and successfully passed load ramp-up and ramp-down tests at 3%/s and 5%/s. Under the ultra-low load of 20%, hydrogen content in oxygen remained compliant, while DC power consumption was as low as 3.85 kWh, achieving efficient and stable operation. This long-duration test was conducted throughout in an outdoor environment at minus 20°C . The product still demonstrated excellent cold and hot start capabilities, as well as high reliability, high safety, and fully flexible operating characteristics, overcoming the longstanding low-temperature operating limitations of traditional electrolyzers and enabling adaptation to more extreme application scenarios. Breakthroughs in Core Technology Innovation Set a New Industry Benchmark This electrolyzer adopts advanced integrated die-casting technology, delivering high consistency in its internal structure. The area of its electrolysis unit is 75% larger than that of traditional designs, and it overcomes sealing challenges on the basis of zero-electrode-gap technology, significantly improving product performance and production efficiency and setting a new technological benchmark for the industry. Company Statement: Continuous Innovation-Driven Development and Deepening Commitment to Hydrogen Energy Equipment Pan Yongle, CEO of Mingyang Hydrogen, stated that this certification is the result of the team’s technological breakthroughs. The company will continue to uphold the philosophy of “innovation-driven, green future,” further increase R&D investment, launch more high performance products, provide global clients with high-quality hydrogen energy solutions, and support the industry’s high-quality development.

[SMM Tin Brief Commentary: SHFE Tin Stopped Falling and Rebounded, Closing Up 2.94% as Macro Pressure and Bottom Support Vied Against Each Other]

[SMM Analysis:Rare Earth Ore Imports Surge in Early 2026, Exceeding Demand and Causing Surplus] According to the latest data from the General Administration of Customs, from January to February 2026, China’s imports of mixed rare earth carbonate were about 3,013.7 mt, up 321% YoY. Over the same period, imports of unlisted rare earth oxides were about 12,860.4 mt, also posting a sharp increase of 209% YoY.

[SMM Stainless Steel Daily Review] SS Futures Stopped Falling and Rebounded, Stainless Steel Spot Quotations Rose in Tandem SMM News, March 20: SS futures stopped falling and rebounded. Base metals futures generally recovered, with SS futures showing particularly strong performance and basically recouping this week’s losses, closing at 14,160 yuan/mt by the midday close. In the spot market, driven by the strong rebound in SS futures and coupled with stainless steel mill agents’ efforts to hold prices firm, stainless steel retail quotations also moved higher accordingly; supported by improving market sentiment, both inquiry activity and trading picked up. High-grade NPI prices remained in the doldrums, and the steel mill tender price for high-carbon ferrochrome was announced below market expectations, leaving weak cost support for stainless steel. The most-traded SS futures contract stopped falling and recovered. At 10:15 a.m., SS2605 was quoted at 14,150 yuan/mt, up 220 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the 220-420 yuan/mt range. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose by 50 yuan/mt; for cold-rolled trimmed 304/2B coil, the average price in Wuxi rose by 100 yuan/mt, and the average price in Foshan rose by 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi was flat; hot-rolled 316L/NO.1 coil quotations in Wuxi were unchanged; cold-rolled 430/2B coil in both Wuxi and Foshan held steady. Entering the traditional September-October peak season, although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and procurement only...

SMM Morning Meeting Summary: Overnight, LME copper opened at $11,816/mt. After dipping to $11,798/mt in early trading, its center rose sharply to a high of $12,395/mt, then hovered at highs, and finally closed at $12,221/mt, up 3.27%. Trading volume reached 52,000 lots, and open interest stood at 292,000 lots, down 944 lots from the previous trading day, mainly reflecting bears cutting positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 95,010 yuan/mt. After the opening, its center moved higher to a high of 95,900 yuan/mt, after which copper prices maintained a fluctuating trend at highs. Near the close, it dipped to 94,530 yuan/mt and finally closed at 93,840 yuan/mt, up 2.12%. Trading volume reached 120,000 lots, and open interest stood at 198,000 lots, down 6,741 lots from the previous trading day, mainly reflecting bears cutting positions throughout the day.

“Gold’s status as a haven may now be tarnished in the eyes of some as the precious metal is falling in price even as war roils the Middle East and financial markets alike, and some may even be tempted to say that the third major bull run in the commodity since 1971 is now over,” says AJ Bell investment director Russ Mould.

As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.