As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.

On Tuesday, Eastern Time, Chicago Fed President Goolsbee warned that the energy shock stemming from the Middle East conflict is threatening the US Fed’s dual mandate, complicating its monetary policy outlook and potentially delaying interest rate cuts—echoing earlier remarks by Fed Governor Barr that inflation risks and oil prices support keeping rates unchanged for longer. Specifically, the energy price shock poses risks to both sides of the US Fed’s dual mandate, making the trade-off between controlling inflation and supporting economic growth more complex. “The new shock has undoubtedly disrupted the US Fed’s plans... and inflation was already uncomfortably high even before the shock occurred,” Goolsbee said bluntly. Goolsbee noted that central bank policymakers around the world lack clear historical experience to draw on in dealing with the current mix of geopolitical risks and inflationary pressures, and therefore “this is a bad situation for central banks.” Goolsbee stressed that the current path of interest rates at central banks around the world still depends heavily on how the conflict evolves, especially its impact on energy markets. As for the US Fed, he said he is not yet able to judge whether it will be able to cut interest rates again, because that outlook depends on the duration of the conflict and the extent to which rising oil prices affect overall inflation. “Only if inflation shows improvement can one realistically expect rates to fall this year,” he added, further reinforcing the US Fed’s data-dependent stance. The US Fed’s Internal Stance Is Turning More Cautious These remarks by Goolsbee were highly consistent with earlier comments by Fed Governor Michael Barr. Barr had previously also emphasized that, given that US inflation remains above target and elevated oil prices are further pushing up inflation, interest rates may need to remain unchanged “for some time.” In addition, Barr likewise pointed out that although the US labour market appears to be stabilizing, US Fed officials need to see clear evidence of sustained disinflation before considering interest rate cuts. Taken together, these comments highlight the US Fed’s increasingly cautious shift in stance. As geopolitical developments exert a growing influence on the US inflation outlook, the combination of persistent price pressures and external shocks has reinforced expectations that high inflation will last longer, while also creating uncertainty over the feasibility of further policy easing in the near term. For markets, the key point is that after the Russia-Ukraine shock several years ago, energy-driven inflation risks have now been firmly incorporated into the US Fed’s reaction function. As a result, US Fed rate expectations may remain sensitive not only to economic data, but also to developments in the Middle East conflict and their impact on oil prices.

As of March 24, titanium dioxide prices continued to rise, with the SMM index up 4.6% since early 2026. Two rounds of price hikes were issued in March amid low inventories. Strong exports and production cuts supported gains, though sustainability post-peak season remains uncertain, hinging on downstream acceptance.

[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.

Jan-Feb 2026 China magnesium exports reached 72.7kt, up 3.4kt YoY. Magnesium alloy led with +33.1% YoY, orders booked through April. Magnesium ingot fell 6.8% due to weak European demand, while powder grew 10.3%. However, US-Israel conflict disrupted Middle East aluminum plants, halting regional magnesium orders and pressuring Q2 outlook despite the strong start.

[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

SMM Morning Meeting Summary: Overnight, LME copper opened at $12,016.5/mt. After dipping to $11,955.5/mt in early trading, its center rose sharply to a high of $12,160/mt, and then continued to hover at highs, finally closing at $12,092.5/mt, down 1.05%. Trading volume reached 23,000 lots, open interest stood at 293,000 lots, up 406 lots from the previous trading day, mainly reflecting increased short positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 93,600 yuan/mt and touched a low of 93,480 yuan/mt at the open. Its center then moved higher to a high of 94,990 yuan/mt, after which copper prices maintained a fluctuating trend at highs, finally closing at 94,670 yuan/mt, up 0.17%. Trading volume reached 51,000 lots, open interest stood at 198,000 lots, down 533 lots from the previous trading day, mainly reflecting reduced short positions throughout the day.

According to data from the General Administration of Customs, China’s copper plate/sheet and strip exports were 13,233.73 mt in January 2026, up 30.59% MoM and up 27.53% YoY; in February, exports were 8,395.28 mt, down 36.56% MoM and up 11.87% YoY. In January-February, China’s cumulative copper plate/sheet and strip exports reached 21,629.01 mt, up 20.96% YoY cumulatively. In January-February 2026, China’s copper plate/sheet and strip exports rose 20.96% YoY, maintaining overall steady growth, with exports covering 120 countries and regions. In terms of export pattern, Vietnam and South Korea ranked first and second, with export volumes of 2,549 mt and 2,542 mt, up 13.6% YoY and 42.5% YoY, respectively. India maintained steady growth and ranked third with exports of 1,898 mt, with the YoY growth rate reaching 29.6%; Taiwan, China and Japan followed, with export volumes of 1,864 mt and 1,375 mt, respectively. Among them, Taiwan, China was up 5.4% YoY, while Japan was the only major destination market to post a YoY decline, down 16.7%. In terms of growth rates, emerging markets were particularly outstanding: Mexico’s YoY growth rate reached as high as 149.0%, with exports surging from 304 mt to 757 mt, making it the most prominent growth market. Malaysia, Thailand, and Germany also performed strongly, with YoY growth rates of 47.0%, 47.2%, and 44.6%, respectively, all achieving growth of more than 40%. The structure of China’s copper plate/sheet and strip export trade modes continued the characteristics seen in the previous period. Customs data showed that in January-February, processing trade with imported materials remained the core export mode, with exports of 14,335 mt, accounting for 66.3% and firmly maintaining its dominant position; Processing and Assembling exports were 3,655 mt, accounting for 16.9%; Ordinary Trade exports were 2,182 mt, accounting for 10.1%; and other trade modes totaled 1,458 mt, accounting for 6.7%. In terms of detailed product structure, in January-February 2026, China’s copper plate/sheet and strip exports were still dominated by copper strip, with exports of 14,151 mt, accounting for 65% and up 23.8% YoY, serving as the core driver boosting overall exports. Bronze strip performed strongly, with a YoY growth rate of 34.8%, the fastest among major categories; cupronickel strip, brass strip, and other categories also achieved YoY growth, with the overall structure remaining stable and growth momentum abundant. (HS code 74091110,74091190,74091900,74092100,74092900,74093100,74093900,74094000,74099000)

[SMM Morning Zinc Briefing: Stronger US Dollar Index Put LME Zinc Under Pressure and Slightly Lower]: Overnight, LME zinc opened at $3,095/mt. After the opening, LME zinc fluctuated downward along the daily average line, hitting an intraday high of $3,097/mt. Near the close, LME zinc fell to a low of $3,027/mt, and finally closed down at $3,038.5/mt, down $64.5/mt, a decline of 2.08%, while trading volume decreased to 11,298 lots...

Strait of Hormuz disruptions and Iran tensions are driving up aluminum prices and premiums. Aluminium Bahrain and Qatalum have cut output, while feedstock is tight. Rerouting via Port of Sohar or Saudi ports raises costs and delays. Buyers are turning to China, India, Russia, Canada, and scrap to offset risk. Prolonged disruption could reduce Middle East market share and reprice it as higher-risk supply.