SMM Nickel News, March 24: Macro and Market News: (1) Iran’s Parliament Speaker Qalibaf denied having held talks with the US side and accused fake news of manipulating the financial and oil markets; Iran’s Islamic Revolutionary Guard Corps said it would launch new attacks on US targets and called Trump’s remarks “psychological warfare” (2) Israeli officials said Washington had set April 9 as the target date for ending the war. Talks between Iran and the US were expected to be held later this week in Pakistan, adding that Washington had not yet informed Israel of any contact with Iran’s Parliament Speaker Qalibaf. Spot Market: On March 24, the SMM price of #1 refined nickel fell 1,700 yuan/mt from the previous trading day. In spot premiums, Jinchuan #1 refined nickel averaged 6,250 yuan/mt, down 300 yuan/mt from the previous trading day; China’s mainstream brands of electrodeposited nickel were at -300-400 yuan/mt. Futures Market: After surging sharply in the night session, the most-traded SHFE nickel 2605 contract pulled back in the morning session, closing the morning session at 132,830 yuan/mt, up 0.69%. Current nickel prices were in a stage of intense tug-of-war between macro headwinds and supply risks. Short term, tighter Indonesian RKAB quotas, continued gains in ore prices, and the risk of sulfur supply disruptions provided solid support below, but high inventory and the slow recovery in end-use demand still capped upside room. The core trading range of the most-traded SHFE nickel contract was expected at 130,000-140,000 yuan/mt in the short term.

[SMM Tin Midday Commentary: SHFE Tin Pulled Back Under Pressure in Early Trading After Rebounding, and Spot Transactions Weakened]

[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

[SMM Daily Review: High-Grade NPI May Still Have Downside Room Under the Dual Pressure of End-Users and Steel Scrap] March 24 News: SMM's upstream sentiment factor for high-grade NPI was 2.88, up 0.01 MoM, while the downstream sentiment factor for high-grade NPI was 1.59, down 0.04 MoM.

[SMM Tin Morning Briefing: The Most-Traded SHFE Tin Contract Opened Sharply Higher in the Night Session and Then Rebounded in Volatile Trading, While the Spot Market Will Gradually Cool Down]

SMM News: Following our previous analysis of the transportation and wind power sectors, this installment shifts focus to the critical demand drivers in the consumer and construction domains: White Goods , Consumer Electronics , and Real Estate-related applications (Elevators and Power Tools). While these sectors individually consume less magnetic material per unit compared to New Energy Vehicles (NEVs), their sheer aggregate volume makes them indispensable pillars of the Neodymium-Praseodymium (Pr-Nd) market. However, data from early 2026 reveals a troubling trend of stagnation and structural contraction across these traditional strongholds. I. White Goods: The Dual Pressure of Production Slumps and Material Substitution In the white goods sector, Neodymium-Iron-Boron (NdFeB) magnets are primarily utilized in two key applications: compressors for inverter air conditioners and motors for drum and impeller washing machines . 1. Air Conditioners: A Sharp Contraction in Output and Dosage According to data from the National Bureau of Statistics (NBS), China’s cumulative air conditioner production for January-February 2026 stood at 40.118 million units , a staggering 35% year-on-year (YoY) decline compared to the 61.921 million units produced in the same period of 2025. (Reason: This drastic drop is attributed to a combination of factors: firstly, an unusually mild winter across major consumption regions significantly dampened heating demand, leading to a destocking cycle among distributors. Secondly, the real estate sector’s continued downturn has severely curtailed new housing completions, directly reducing the installation of centralized and split AC systems. Lastly, high inventory levels carried over from 2025 forced manufacturers to aggressively cut production schedules in Q1 2026 to avoid capital lock-up.) Looking at the full year, SMM forecasts a marginal growth of 0.96% for 2026, with total annual production projected at 271.095 million units . (Reason: The near-flat growth outlook reflects a mature market saturation where replacement demand, rather than new installations, drives volume. While export markets offer some resilience against domestic weakness, rising trade barriers and logistical costs in key regions like Europe and North America are expected to cap significant expansion.) Applying SMM’s calculation model: Inverter Penetration: 99% NdFeB Motor Penetration: 92% Specific Consumption: Assumed at 100g/unit for 2026. Based on these parameters, the total NdFeB consumption for the air conditioner sector in 2026 is estimated at 24,691 tons , representing a 23% decrease from the 29,163 tons consumed in 2025. The core driver of this decline is twofold: first, the persistently high prices of Pr-Nd since the second half of 2025 have accelerated the industry’s cost-reduction initiatives. Second, there is a clear technological shift towards minimizing rare earth usage. The average single-unit dosage has dropped from 120g/unit in 2025 to 100g/unit in 2026 , as manufacturers optimize motor designs and, in some lower-end models, substitute with ferrite magnets or induction motor technologies where efficiency standards allow. 2. Washing Machines: A Slow Erosion of Demand For January-February 2026, China’s cumulative washing machine production was 18.58 million units , a slight 0.3% YoY decline from the 18.51 million units in the same period of 2025. (Reason: The stability in production volumes masks underlying weakness. The slight dip is primarily due to weak consumer confidence impacting discretionary spending on home appliance upgrades. Furthermore, the export market for washing machines has faced headwinds from sluggish global economic growth and intensified competition from Southeast Asian manufacturing hubs, offsetting modest domestic recovery efforts.) SMM projects a full-year growth rate of 3.1% for 2026. (Reason: This modest recovery is underpinned by government-led "trade-in" subsidy policies aimed at boosting domestic consumption of energy-efficient appliances. Additionally, product innovation in the high-end segment, such as washer-dryer combos and smart features, is expected to stimulate some replacement demand, though the overall ceiling remains low.) Demand Calculation Logic: Drum Washer Penetration: 63% (High-end, 98% use NdFeB) Impeller Washer Penetration: 28% (Mid-range, 50% use NdFeB) Specific Consumption: 290g/unit for drum washers; 240g/unit for impeller washers. Under this model, the total NdFeB demand for washing machines in 2026 is estimated at 27,204.52 tons , a 0.2% decrease from 27,262 tons in 2025. The sector is experiencing a slow but steady erosion of demand. While high-end drum washers rely heavily on efficient NdFeB motors to meet stringent energy labels, the volatility of rare earth prices is prompting manufacturers to cautiously explore alternative motor designs or reduce magnet grades in non-critical applications. Consequently, the industry has adopted a strategy of gradual reduction rather than abrupt substitution, balancing performance requirements with cost control. Outlook: The trajectory for white goods in 2026 is undeniably pessimistic. Both production volumes and technical intensity (dosage per unit) are trending downward, creating a double drag on Pr-Nd demand. II. Consumer Electronics: Volume Resilience vs. Intensity Decline The consumer electronics sector, modeled by SMM, comprises four main segments: Mobile Phones , Tablets , Desktops/Laptops , and Smartwatches . These devices utilize NdFeB primarily for acoustic components (speakers/receivers) and haptic feedback motors, with emerging uses in magnetic charging interfaces. The specific consumption is generally low, ranging from 2-5g/unit , except for desktops which average 15g/unit . Market Performance (Jan-Feb 2026): Mobile Phones: 220 million units (+6.8% YoY). Micro-computer Equipment: 41.956 million units (-31% YoY). Breakdown: 21% Tablets, 27% Desktops, 52% Laptops. Smartwatches: 8.196 million units (+7.8% YoY). (Reason: The divergence in performance is stark. Mobile phone growth is driven by the global rollout of AI-enabled handsets and the replacement cycle for 5G devices, particularly in emerging markets. Conversely, the sharp collapse in micro-computer equipment reflects the post-pandemic normalization of demand; the massive stockpiling of devices during 2020-2022 has led to a prolonged digestion phase. Additionally, extended device lifespans due to improved hardware durability have further suppressed replacement rates for PCs and tablets.) 2026 Full-Year Forecast: SMM anticipates a 1% growth for mobile phones and micro-computers combined, and a 5% growth for smartwatches. (Reason: The muted outlook for computing devices stems from persistent macroeconomic uncertainty and corporate IT budget tightening. For smartwatches, growth is fueled by increasing health-monitoring capabilities and deeper ecosystem integration with smartphones. However, the entire sector faces a cloud of uncertainty due to escalating geopolitical tensions affecting supply chains and rising memory chip prices, which may force OEMs to revise production targets downward later in the year.) Demand Estimation: Mobile Phones: 3,109.8 tons Micro-computers: 2,018.9 tons Smartwatches: 125.06 tons Total 2026 Demand: 5,253.76 tons , a 3% decline from 5,421.19 tons in 2025. The primary driver for this decline is the continuous, albeit slow, reduction in specific consumption. As miniaturization advances and alternative magnetic materials improve, the amount of NdFeB required per device is shrinking. Despite the relatively low single-unit dosage, the massive scale of the consumer electronics industry ensures it remains a significant consumer of NdFeB. Moreover, this sector is characterized by highly standardized supply chains, where major OEMs maintain binding agreements with certified magnet suppliers, making demand relatively stable but resistant to price-driven spikes. III. Real Estate Related: Elevators and Power Tools The final segment covers industries tightly coupled with the real estate cycle: Elevators and Handheld Power Tools . 1. Elevators: Policy Support vs. Structural Headwinds In January-February 2026, elevator production reached 150,000 units , a 7.1% YoY increase . (Reason: This short-term surge is largely attributable to the acceleration of projects that were delayed in late 2025, as developers rushed to meet pre-delivery deadlines before stricter regulatory inspections took effect. Additionally, government mandates for retrofitting old residential communities with elevators in urban renewal zones provided a temporary boost to order books.) However, SMM forecasts a full-year contraction of -3% for 2026. (Reason: The long-term outlook is grim due to the fundamental slowdown in new residential construction starts, which remain at multi-year lows. The debt crisis plaguing major property developers continues to stall new project launches, directly impacting the demand for new elevator installations. While the retrofit market offers some support, it is insufficient to offset the collapse in new building commissions.) Calculation: Energy-saving Elevator Penetration: 90% Specific Consumption: 6 kg/unit (for energy-saving models). Total 2026 Demand: 7,222.6 tons , a 1.3% increase from 7,125.3 tons in 2025. (Reason for Growth: The slight increase in total tonnage despite falling production volumes is entirely driven by the rising penetration of energy-saving elevators. Stricter national energy efficiency standards (GB standards) are forcing manufacturers to adopt permanent magnet synchronous motors (PMSM) over traditional asynchronous motors, thereby increasing the average NdFeB dosage per unit even as the total number of units declines.) 2. Handheld Power Tools: A Direct Casualty of Property Slump Production of handheld power tools in Jan-Feb 2026 was 29.566 million units , down 0.24% YoY . SMM projects a -3% decline for the full year 2026. (Reason: The downturn is inextricably linked to the stagnation in the global and domestic real estate markets. Reduced renovation activities and a slowdown in infrastructure projects have dampened demand for professional-grade tools. Furthermore, high inventory levels in distribution channels across North America and Europe, resulting from over-ordering in 2024, have led to a prolonged period of destocking.) Definition & Scope: According to the National Bureau of Statistics, handheld electric tools refer to portable motor-driven tools operated by hand, including electric drills, grinders, sanders, saws, and screwdrivers . These products are highly sensitive to housing turnover and renovation rates. Demand Calculation: NdFeB Penetration: 60% Specific Consumption: 80g/unit Total 2026 Demand: 9,134 tons , a sharp 13.4% drop from 10,548 tons in 2025. The significant contraction in this sector underscores the deep correlation between the property market and industrial metal demand. As the real estate sector remains in a prolonged adjustment phase, the downstream demand for power tools—and consequently NdFeB—faces sustained pressure. Conclusion The analysis of white goods, consumer electronics, and real estate-related sectors paints a picture of structural weakness for 2026. While niche policy drivers (like energy-saving elevator mandates) provide isolated pockets of growth, the overarching trends are defined by production saturation, inventory destocking, and aggressive material substitution . The combined effect of lower production volumes and reduced single-unit dosages creates a formidable headwind for Pr-Nd prices. In the final installment of this series, we will pivot to the future: examining the burgeoning demand from Low-Altitude Economy (eVTOLs), Robotics (Industrial and Service), and the relentless expansion of Electric Two-Wheelers . These emerging sectors may hold the key to offsetting the declines observed in traditional industries and reshaping the long-term demand curve for rare earth magnets.

[SMM Shanghai Spot Copper] Copper prices rose from yesterday, but both buying and selling sentiment pulled back intraday, indicating that downstream acceptance of current price levels remained limited. In terms of market structure, under the current price spread between futures contracts structure, suppliers showed strong willingness to sell, with some offloading cargo, driving overall spot discounts down rapidly, while downstream willingness to make counteroffers was relatively evident. Entering the second trading session, after premiums were cut further, market transactions improved somewhat, but downstream procurement remained generally cautious, mainly focused on restocking on dips, with insufficient willingness to chase higher prices. Overall, amid the tug-of-war between suppliers actively selling and downstream buyers purchasing cautiously, Shanghai spot copper discounts were expected to remain under pressure tomorrow.

According to the latest data from China Customs, China imported a total of 5,561 mt in metal content of nickel sulphate in February 2026, down 20% MoM and up 54% YoY. China exported 33 mt in metal content of nickel sulphate, down 74% MoM and down 75% YoY. China's net imports of nickel sulphate were 5,528 mt in metal content in February 2026, down 19% MoM and up 59% YoY. By country, exports to Japan pulled back this month, dragging down total exports; on the import side, imports from Indonesia and other countries also pulled back this month. Although imports from Finland increased, total imports still declined. Net imports of nickel salts also pulled back this month, broadly in line with last month's expectations.

SMM News, March 24: Today, in Guangdong, spot prices for #1 copper cathode against the front-month contract were reported at a premium of 70 yuan/mt for high-quality copper, down 30 yuan/mt from the previous trading day; a discount of 30 yuan/mt for standard-quality copper, down 20 yuan/mt from yesterday; and a discount of 90 yuan/mt for SX-EW copper, down 20 yuan/mt from yesterday. The average price of #1 copper cathode in Guangdong was 94,030 yuan/mt, up 1,045 yuan/mt from the previous trading day, while the average price of SX-EW copper was 93,920 yuan/mt, up 1,055 yuan/mt from the previous trading day. Spot market: Guangdong inventory declined for six consecutive days, mainly due to limited arrivals and higher shipments. Although inventory continued to fall, downstream users showed weak restocking interest as copper prices surged sharply. Suppliers had to keep lowering spot premiums to conclude deals. Overall, trading activity in the market was noticeably weaker today than yesterday. Today, the purchasing sentiment for copper cathode in Guangdong was 2.48, down 0.15 from the previous trading day, and the shipment sentiment was 3.31, down 0.11 from the previous trading day (historical data is available in the database). Overall, after the sharp rebound in copper prices, downstream buying sentiment weakened, and spot premiums moved lower.

SMM, March 24: Overnight, LME lead opened at $1,889/mt. In early trading, LME lead fluctuated downward, dipping to $1,873.5/mt. Then bulls stepped in, driving prices sharply higher, with wide swings in the $1,888.5-1,909/mt range and a session high of $1,909/mt. Near the close, bullish momentum somewhat faded, and LME lead edged down slightly to finally close at $1,898.5/mt. It posted a small bullish candlestick, up $9.5/mt, or 0.5%. Overnight, the most-traded SHFE lead 2605 contract opened higher with a gap at 16,495 yuan/mt. In early trading, SHFE lead prices briefly fluctuated upward, reaching a high of 16,510 yuan/mt. It then saw wide swings in the 16,440-16,500 yuan/mt range. During the session, SHFE lead fluctuated downward, falling to 16,405 yuan/mt. Late in the session, SHFE lead prices stabilized slightly and rebounded, finally closing at 16,435 yuan/mt. It posted a small bearish candlestick, up 40 yuan/mt, or 0.24%. Supply side, discounts quoted by primary lead enterprises narrowed slightly WoW, and among cargoes self-picked up from production site, heavily discounted cargoes were also hard to find. The number of enterprises quoting secondary refined lead was relatively small, and there were clear differences between upstream and downstream in price acceptance: downstream had low acceptance of premiums, while upstream held firm offers and showed cautious willingness to sell. Demand side, procurement by downstream enterprises was somewhat scattered. Some mainly made purchases under long-term contracts, while others bought the dip as needed, resulting in differentiated market transactions. SMM expects SHFE lead prices to remain in the doldrums in the short term.