Hoa Phat’s 2025 results marked a major step-up driven by the ramp-up of Dung Quat 2, pushing crude steel output above 11 million tons and lifting earnings through higher volumes and cost dilution despite weak global steel prices. Growth was supported by stronger HRC and downstream sales, a rising export mix, and continued domestic dominance. The year also signals a strategic shift toward higher-value products and future capacity expansion into rail and special steels.

Over the past half-century of industrialisation, the global seaborne iron ore market consolidated around a duopoly dominated by Australia's Pilbara region and Brazil's Carajás and Iron Quadrangle districts. However, driven by macroeconomic cycle evolution, a structural shift in China's growth engine, and the steel industry's irreversible push toward low-carbon and green transformation, this traditional supply map is undergoing an unprecedented reshaping. On 26 November 2025, the first commercial vessel loaded with Simandou iron ore departed from the Port of Mabarya, marking the official commissioning of Guinea's Simandou Iron Ore Project — the world's largest undeveloped high-grade greenfield iron ore deposit by reserve. This milestone signals that the African continent, long relegated to secondary status, is progressively emerging as a significant new force in the global ferrous metals market. Africa's iron ore resources are widely regarded as the third-largest iron ore supply region globally, after Brazil's Carajás and Australia's Pilbara. With an estimated 13.8% share of global iron ore resources, and representing the most significant supply-side growth driver over the next five years, shifts in African iron ore dynamics will be a key determinant of international iron ore pricing over the long term. I. Global Iron Ore Market Background According to SMM research data, global iron ore production in 2025 is estimated at approximately 2.472 billion tonnes (bt). Africa contributes roughly 95 million tonnes (Mt), representing close to 4% of global output. As major mining projects progressively come on stream, Africa's iron ore production capacity is forecast to double by 2030, reaching approximately 259 Mt. Assuming no production curtailments elsewhere, Africa's global market share could rise to nearly 10%, while the overall global iron ore supply surplus is projected to widen to approximately 220 Mt. Although the international iron ore market has already entered a prolonged loose supply cycle, the substantive supply shock from African iron ore is expected to materialise gradually over the next five years. In the near term, Africa's estimated incremental shipment of approximately 15 Mt in 2026 — bolstered by its superior high-grade characteristics — is expected to be absorbed relatively smoothly by steelmakers seeking low-carbon blending feedstocks, resulting in a relatively moderate impact on absolute benchmark pricing. The critical inflection point is projected to fall in 2028–2029. As rail and port infrastructure currently under construction in West Africa is fully commissioned, a surge in high-grade iron ore output will exert heavy downward pressure on the right-hand side of the global iron ore cost curve. This will not only systematically compress the iron ore price floor but will trigger intense structural displacement — squeezing the operating margin of low-grade, high-cost producers. The current price downcycle is expected to persist through 2028. When international ore prices breach the USD 90/tonne marginal cost support level, higher-cost non-mainstream small and mid-size mines will be forced into curtailment and exit. The resulting supply shakeout will reshape the global iron ore supply structure into a multi-oligopoly dominated by ultra-large, low-cost operations (including the new African mines), complemented by quality mid-tier producers. II. Africa's Current Market Landscape: South Africa as Dominant Producer, West Africa Expanding Aggressively Building on the global context, this section focuses on Africa's overall iron ore landscape. As the primary driver of supply growth over the next five years, Africa's iron ore production is concentrated in West Africa and South Africa, currently dominated by three key countries. South Africa South Africa is the continent's largest producer, with 2025 output reaching approximately 67 Mt and export shipments maintaining an overwhelming 65% share of total African iron ore exports. However, South Africa's iron ore sector faces structural constraints limiting its organic growth headroom. As other emerging African resource nations commission significant new projects, South Africa's share of total African export volumes is projected to face sustained compression. Mauritania Mauritania is Africa's second-largest iron ore producer, with 2025 output of 15 Mt and export volumes of approximately 12 Mt, representing approximately 12% of the African market. Strategically situated adjacent to the Atlantic Ocean with high-grade iron ore deposits deep within the Sahara Desert, Mauritania possesses highly advantageous geographic and mineralogical characteristics. Its proximity to European and Middle Eastern markets — both in urgent need of green industrial raw materials — provides ideal conditions for the country to become a hub for global green metallurgy capacity relocation. Mauritania is expected to emerge as a highly promising iron ore supply nation going forward. Sierra Leone Sierra Leone is another important regional supply pole, with projected 2025 output also reaching approximately 12 Mt, holding a stable share of approximately 12% in the African export market. Chinese-invested iron ore mines within the country are actively scaling up their operations. Trade Flow Overview Based on full-year 2024 trade data, the proportion of African iron ore shipped to China is relatively low compared to traditional mainstream ore origins, at approximately 60%. The broader Pan-Asian market — encompassing China, Japan, and South Korea — absorbs approximately 70% of total African iron ore shipments. Western European countries, led by the Netherlands and Germany, constitute Africa's core secondary destination, accounting for close to 14% of trade flows. The remaining marginal trade flows are broadly diversified, extending to emerging steelmaking capacity clusters in the Middle East, including Bahrain, Oman, and Saudi Arabia. Key Corporate Players At the corporate level, South Africa's Kumba Iron Ore and Assmang rank as Africa's largest and second-largest iron ore producers, with annual output of approximately 37 Mt and 17 Mt respectively. Kumba Iron Ore: Kumba's mining operations — including the Sishen mine — are globally recognised for producing high-grade fines (Fe >62%) and metallurgically superior premium lump ore (Fe 65.2%). Under the prevailing trend of blast furnace (BF) emission reduction, this type of direct-charge lump ore — which reduces sintering-related carbon emissions — commands strong market demand and a substantial price premium. Assmang: Assmang similarly holds high-quality iron ore assets, operated as a 50:50 joint venture between African Rainbow Minerals (ARM) and Assore. Its Assmang Fines and Assmang Lump products (Fe 64–65%) are also direct-charge, high-quality materials. However, the company's key bottleneck lies not at the pithead but on the rail. Heavy dependence on Transnet Freight Rail (TFR) for haulage means logistics constraints frequently cap its achievable shipment volumes. SNIM (Société Nationale Industrielle et Minière): Mauritania's state-owned mining company is Africa's third-largest iron ore producer after the two South African majors. Unlike mainstream Australian and Brazilian ores, SNIM products occupy a distinctive niche in terms of physicochemical specifications and market segment. Its most widely traded product, TZFC fines, is characterised by extremely low alumina (Al2O3) and phosphorus (P) content. As an excellent blending ore, major steelmakers regularly blend SNIM fines with high-alumina Australian fines (such as certain Pilbara blend products) to significantly dilute the impurity ratio in the burden, thereby optimising blast furnace performance metrics. III. Africa's Market Transformation: Major Producers Facing Stagnation; Emerging Projects as Primary Growth Drivers Where does future growth lie? According to SMM observations, Africa is expected to undergo a significant structural transformation within the next five years. Multiple large-scale iron ore projects across the continent are currently under construction, with scheduled commissioning prior to 2030. Based on our modelling, African iron ore supply is forecast to grow substantially from the current approximately 95 Mt to 260 Mt over five years — a cumulative increase of 85%. The market structure is also expected to shift from South Africa-dominated Western-oriented exports to a Guinea-led export paradigm. Guinea — Simandou Iron Ore Project The primary growth driver will be Guinea's renowned Simandou iron ore project, jointly developed by multiple entities and representing the world's largest undeveloped high-grade open-pit hematite deposit. The project holds reserves in excess of 5 billion tonnes (bt) and a designed production capacity of 120 Mt per annum, making it the project with the greatest strategic potential to reshape the existing iron ore market structure. Since first ore shipments in late November 2025, cumulative exports from the principal export hub — the Port of Mabarya — reached approximately 1.6 Mt through Q1 2026. Blocks 1 & 2, developed under the Winning Consortium Simandou (WCS), have successfully commenced production, with 2026 capacity expected to reach nameplate and ramp-up to 60 Mt per annum projected over the next two to three years. Blocks 3 & 4, led by Simfer (a Rio Tinto and Baowu joint venture), are forecast to commission in Q1 2026, with estimated 2026 shipments of 5 Mt and a 30-month ramp-up timeline to reach 60 Mt per annum. In aggregate, Guinea is projected to achieve 120 Mt per annum before 2030, becoming the world's second-largest single iron ore project by capacity — second only to Vale's S11D project in Brazil (designed capacity of 200 Mt post-expansion, expected by 2030). Other African Countries — Key Development Projects Other nations — including Liberia, Gabon, Sierra Leone, and the Republic of Congo — all have iron ore projects under development. Projects scheduled for commissioning before 2030 account for a combined planned capacity of approximately 46 Mt. The largest single project is ArcelorMittal Liberia's (AML) Tokadeh Phase II, expected to commission in H2 2026 and reach a nameplate capacity of 20 Mt per annum by year-end, producing iron ore concentrate with an estimated grade exceeding Fe 66%. Given that AML's European steelmaking capacity cannot absorb such a large volume increment in the near term, the majority of Tokadeh's output is expected to enter the international seaborne market, exerting pricing pressure on the iron ore concentrate segment. South Africa — Structural Constraints on Production Growth South Africa's output is expected to remain broadly stable in the 63–67 Mt range, with mild downside risk. The primary underlying cause is the country's heavy dependence on the heavy-haul Sishen–Saldanha Bay rail corridor, operated by Transnet Freight Rail (TFR). In recent years, TFR has suffered a severe reduction in effective haulage capacity due to locomotive fleet shortages, frequent cable theft incidents, and chronic infrastructure underinvestment, materially constraining the rail transport of major bulk commodities including iron ore and coal. In its FY2025 annual results published in February 2026, Kumba Iron Ore — South Africa's dominant iron ore producer — reported total finished goods inventory of 7.5 Mt, up from 6.9 Mt at end-2024. With rail haulage capacity unable to match mine production, South Africa's major iron ore producers have been compelled to stockpile large volumes at mine sites. To avoid inventory saturation, miners have been forced to proactively revise production guidance downward. While producers are actively addressing haulage constraints, the deeply entrenched structural issues on the rail network are unlikely to be resolved in the short term. Mauritania — SNIM Long-Term Strategic Growth Blueprint Post-2030, attention turns to SNIM's strategic growth roadmap. Under its Horizon 1 programme, the company plans to raise annual production capacity to 45 Mt by 2031, through the implementation of lean manufacturing practices, equipment and technology upgrades, and the co-development of new mineral reserves. Of this total, 20 Mt will be produced under SNIM's wholly owned capacity, while the remaining 25 Mt will be realised through joint ventures with international capital partners. SNIM has further set a long-term target to expand annual capacity to 80 Mt by 2045 under its Horizon 3 plan. Democratic Republic of Congo (DRC) — MIFOR (Grand Est Iron Ore Project) On 26 March 2026, the DRC and China signed a Memorandum of Understanding designating the MIFOR project as a priority flagship initiative. The deposit is estimated to hold cumulative resources of 15–20 bt, with an average grade exceeding Fe 60% — a potential scale approximately 2.5 times that of Guinea's Simandou. Phase I capital expenditure is estimated at USD 28.9 billion, encompassing the construction of a heavy-haul railway and the utilisation of Congo River navigation, ultimately linking to a deep-water port at Banana on the Atlantic coast. Phase I design capacity stands at 50 Mt per annum, with a long-term target of scaling to 300 Mt per annum. These projects collectively underscore Africa's inevitable emergence as an indispensable iron ore supply source for the global steel industry. IV. Global Steel Industry Chain Transformation: Can Africa, as a Hub for High-Grade Ore, Enable DRI Production? High-Grade Ore as a DRI Feedstock Advantage Notably, the majority of Africa's current and planned iron ore projects produce ore at average total iron (Fe) grades predominantly above 65%, with extremely low impurity content. This scarce, high-grade ore is the ideal feedstock for the Direct Reduced Iron (DRI) process. As the DRI-Electric Arc Furnace (EAF) green steel route gains traction across Europe, the Americas, and China, demand for iron ore at Fe 65% and above will grow exponentially on the demand side. This will confer a substantial 'grade premium' on major projects, including South Africa's Kumba, Guinea's Simandou, and other future African producers. Over the longer term, iron ore pricing benchmarks are inexorably shifting away from the traditional Platts 62% Fe index, and African ore producers will gain bargaining leverage when renewing long-term supply agreements, thereby reshaping the global industry chain profit distribution structure. DRI Investment Pipeline in Africa In alignment with global carbon neutrality objectives, international investors — encouraged by local governments — are actively deploying capital into high value-added downstream processing facilities, including DRI plants and high-grade pellet facilities, aimed at leveraging Africa's abundant high-grade iron ore resources and vast renewable energy potential for DRI production. According to SMM observations, Africa is projected to add approximately 20 Mt of DRI capacity by 2030. The largest single project is a Libyan integrated DRI complex, jointly developed by Turkish steelmaker Tosyali and the Libyan National Steel Company, with a total design capacity of 8.1 Mt. China's Decarbonisation Push and the Global Green Steel Transition As China advances its dual carbon targets — carbon peaking by 2030 and carbon neutrality by 2060 — the domestic steelmaking sector is undergoing significant adjustment. The traditional carbon-intensive Blast Furnace–Basic Oxygen Furnace (BF-BOF) long route faces increasingly stringent capacity replacement policies and environmental regulations. Simultaneously, the global trade system is accelerating the imposition of carbon costs, most notably through the EU Carbon Border Adjustment Mechanism (CBAM), compelling global steel supply chains to accelerate the transition from the source toward a low-carbon, ultimately zero-carbon 'green steel' era. In the context of this irreversible transition, the DRI-EAF short-route process has become the most commercially viable decarbonisation pathway. To meet surging global demand for green steel, market projections indicate that global DRI designed production capacity will need to expand by hundreds of millions of tonnes during the 2030s. This scale of expansion will profoundly alter the global steel supply structure: the share of traditional hot metal (pig iron) production will progressively decline, while low-carbon DRI supply will directly determine the competitiveness of major economies in the global green steel market. In particular, 'hydrogen metallurgy' — using green hydrogen to replace natural gas and coking coal as the reductant in iron ore reduction — is widely recognised by the industry as the core technology for achieving ultimate zero-carbon steelmaking. Africa as the Future 'Green Iron' Production Hub Represented by world-class high-grade iron ore projects such as Guinea's Simandou, the progressive commissioning of these mega-mines is expected to inject over 100 Mt of high-grade iron ore per year into the global market, substantially alleviating the global scarcity of DRI-grade ore. More critically, North Africa and West Africa possess world-leading solar and wind energy potential, enabling large-scale, low-cost green hydrogen production in situ. This perfect combination of 'high-grade ore + low-cost green hydrogen' is increasingly inclinng multinational capital and steel majors toward establishing DRI production lines directly on African soil — reducing iron ore to low-carbon Hot Briquetted Iron (HBI) on-site for ocean transport to EAF facilities in Asia and Europe. Africa is thus formally transitioning from its historical role as a raw material exporter to become an indispensable link in the green iron production chain of the future.

Driven by global economic integration and technological innovation, electromagnetic wire, as a fundamental material for the electrical power and electronics industries, has seen continuously climbing demand. In 2025, the rapid development of industries such as NEVs and smart power grids in China injected strong momentum into the electromagnetic wire industry. Meanwhile, tightening environmental protection regulations and rising technological barriers have accelerated the industry's transition toward green production and intelligent manufacturing. The eastern region has demonstrated a notable industrial clustering effect, the central and western regions have accelerated their industrial layout leveraging resources and policies, and the northeast has embraced new opportunities through the Belt and Road Initiative. Against this backdrop, Jiangxi Zhongde Mage Technology Co., Ltd. joined hands with SMM to jointly produce the . Through data collection and regional analysis, the industry distribution map was created to reveal development characteristics and trends, providing a scientific basis for enterprise strategies, policy formulation, and investment decisions, and facilitating the high-quality development of China's electromagnetic wire industry. (Claim the distribution map for free:) — Leader in Intelligent Horizontal Enamelling Machines — Jiangxi Zhongde Mage Technology Co., Ltd. is a leading Chinese enterprise specializing in the manufacturing of copper and aluminum round and flat enamelled wire equipment, and is a national high-tech enterprise integrating product R&D, design, manufacturing, and services. The company covers an area of 45 mu, with a total building area of approximately 30,000 ㎡, nearly 100 employees, and an annual production of over 200 horizontal enamelling machines. Adhering to the core values of "striving for excellence and achieving a win-win future," the company upholds the product philosophy of "high technology and high quality" and the service philosophy of "serving clients wholeheartedly," earning unanimous acclaim from clients in and outside China! The company holds multiple core patented technologies for enamelling machines and currently possesses the capability to design, produce, and manufacture products covering wire gauge ranges of 0.015–3.5 mm, at high, medium, and low speeds, in copper, aluminum, alloy, and other specifications. Its product lineup covers single-head fine wire machines, multi-head standard machines, multi-head medium-speed drawing-and-enamelling machines, single-head high-speed drawing-and-enamelling machines, and flat wire high-speed integrated machines. Drawing and enamelling can be integrated, with automatic reel changeover, automatic reel loading and unloading, and full data chain connectivity across the entire machine, enabling truly digitalized and unmanned workshops. Key features are as follows: 1. Fully automatic reel changeover for wire collection, with a success rate of ≥99%, improving the level of automation, reducing worker labor intensity, and enhancing production efficiency. 2. Large-reel wire collection, with collection weight reaching up to 25 kg for wire below 0.1 mm, reducing reel changeover frequency and lowering work intensity. 3. Double-cone take-up: For wire below 0.1mm, double-cone large-capacity wire rods are used, enabling high-speed pay-off and winding. 4. Energy-saving and environmental protection: The multi-head machine consumes 250-600 kWh/24h, with emissions meeting national standards. 5. High-end intelligent medium-speed drawing and enameling integrated machine (including automatic loading/unloading, transportation, weighing, marking, automatic palletizing, and packaging). 6. Information IoT: All data from each machine is consolidated in the master control computer. Multiple machines in the entire workshop can be linked and consolidated to the server, analyzed to generate data reports. All wire specifications, production, power consumption, uptime rate, efficiency ratio, fault analysis, as well as weekly, monthly, quarterly, and annual reports can be realized. Hotline: 13510000123 Website: http://www.jxzdmg.com Address: Cable Industry Park, Economic Development Zone, Guixi City, Jiangxi Province SMM Contact Zhang Guolei 166 0190 0190 Long press to scan the QR code for a free distribution map

SMM May 18: Metals market: As of the midday close, domestic base metals fell across the board. SHFE copper dropped 1.47%, SHFE aluminum fell 1.22%, SHFE lead declined 0.67%, SHFE zinc lost 0.91%, SHFE tin slid 3.26%, and SHFE nickel fell 1.17%. In addition, the most-traded casting aluminum alloy futures fell 1.1%, the most-traded alumina contract dropped 0.54%, the most-traded lithium carbonate contract rose 0.12%, the most-traded silicon metal contract fell 0.82%, and the most-traded polysilicon futures declined 0.98%. Ferrous metals mostly fell. Iron ore dropped 0.99%, rebar fell 1.02%, hot-rolled coil declined 0.89%, and stainless steel lost 1.41%. Coking coal and coke: the most-traded coking coal contract rose 0.12%, while the most-traded coke contract fell 0.74%. Overseas base metals: as of 11:41, LME metals declined across the board. LME copper fell 0.28%, LME aluminum dropped 0.63%, LME lead lost 0.2%, LME zinc declined 0.81%, LME tin slipped 0.05%, and LME nickel fell 0.35%. Precious metals: as of 11:41, COMEX gold fell 0.59%, hitting an intraday low of $4,483.5/oz; COMEX silver dropped 3.34%. Domestic precious metals: the most-traded SHFE gold contract fell 1.61%, and the most-traded SHFE silver contract declined 9.38%. In addition, as of the midday close, the most-traded platinum futures fell 2.36%, and the most-traded palladium futures dropped 1.92%. As of the midday close, the most-traded Europe containerized freight index contract rose 3.77% to 2,590 points. As of 11:41 on May 18, midday futures quotes for selected contracts: Spot Market and Fundamentals Copper: Today in Guangdong, #1 copper cathode spot prices against the front-month contract: high-quality copper was quoted at a premium of 260 yuan/mt, down 10 yuan/mt from the previous trading day; standard-quality copper was quoted at a premium of 180 yuan/mt, down 20 yuan/mt from the previous trading day; SX-EW copper was quoted at a premium of 110 yuan/mt, down 20 yuan/mt from the previous trading day. The average price of Guangdong #1 copper cathode was 104,235 yuan/mt, down 1,515 yuan/mt from the previous trading day, and the average price of SX-EW copper was 104,160 yuan/mt, down 1,485 yuan/mt from the previous trading day. Spot market: Guangdong inventory increased again today... Macro Front China: [NBS: Industrial value-added output of enterprises above designated size grew 5.6% in January-April; the national economy maintained a steady and progressive development trend] From January to April, under the strong leadership of the CPC Central Committee with Comrade Xi Jinping at its core, all regions and departments earnestly implemented the decisions and plans of the CPC Central Committee and the State Council, adhered to the general principle of seeking progress while maintaining stability, fully and faithfully applied the new development philosophy, accelerated the construction of a new development paradigm, effectively implemented more proactive and impactful macro policies, and focused on stabilizing employment, enterprises, markets, and expectations. Production and supply grew steadily, market sales continued to expand, foreign trade resilience remained evident, employment and prices were generally stable, new growth drivers strengthened, and high-quality development continued to advance toward new and better outcomes. Data from the National Bureau of Statistics (NBS) showed that from January to April, the value added of industrial enterprises above designated size nationwide grew 5.6% YoY. By three major categories, the value added of the mining industry grew 5.5% YoY, manufacturing grew 5.8%, and the production and supply of electricity, heat, gas, and water grew 4.5%. The value added of equipment manufacturing grew 8.7% YoY, and that of high-tech manufacturing grew 12.6%, which were 3.1 and 7.0 percentage points faster than the overall industrial value added above designated size, respectively. By economic type, the value added of state-owned holding enterprises grew 4.4% YoY; joint-stock enterprises grew 6.0%, foreign-invested and Hong Kong, Macao, and Taiwan-invested enterprises grew 3.9%; and private enterprises grew 5.2%. By product, the production of 3D printing equipment, lithium-ion batteries, and industrial robots grew 50.9%, 36.0%, and 25.7% YoY, respectively. In April, the value added of industrial enterprises above designated size nationwide grew 4.1% YoY, up 0.05% MoM. In April, the manufacturing PMI was 50.3%; the business production and operation activity expectations index was 54.5%, up 1.1 percentage points from the previous month. From January to March, industrial enterprises above designated size nationwide achieved total profits of 1,696 billion yuan, up 15.5% YoY. [NBS: In April, new home selling prices in first-tier cities rose MoM, while declines in second- and third-tier cities narrowed or remained the same as the previous month] NBS: In April, new home selling prices in first-tier cities rose 0.1% MoM, with the increase pulling back 0.1 percentage points from the previous month. Among them, Shanghai, Guangzhou, and Shenzhen rose 0.4%, 0.1%, and 0.1% respectively, while Beijing fell 0.2%. New home selling prices in second-tier cities fell 0.1% MoM, with the decline narrowing 0.1 percentage points from the previous month. New home selling prices in third-tier cities fell 0.3% MoM, with the decline the same as the previous month. Among the 70 large and medium-sized cities, 21 cities saw new home selling prices rise or remain flat MoM, an increase of 5 from the previous month. [Shenzhen property market heat continues, housing provident fund loan share rises significantly] The latest statistics showed that after the new policy, the share of housing provident fund loans rose significantly, reflecting from one perspective that the new policy precisely released rigid and improvement-oriented housing demand, market confidence strengthened, and transaction heat continued. As of May 17, citywide first-hand and second-hand residential net signings totaled 5,526 units, up 39.2% YoY. (Shenzhen Release) US dollar: As of 11:41, the US dollar index was up 0.09% at 99.34. According to the UK's Financial Times, two US Fed officials nominated by US President Trump opposed allowing Powell to serve as interim Fed chairman "without a time limit." This underscores that political divisions within the central bank are deepening as the White House continues its attacks on the US Fed. Fed Chairman Powell's second term ended on Friday. Powell was appointed as interim chairman to carry out duties before his formal successor, Warsh, completes his inauguration. Milan and Bowman, nominated by Trump to join the US Fed's Board of Governors, said in a joint statement that they supported Powell serving temporarily as interim chairman, but because the arrangement was "without a time limit," they "could not support this action." Milan cast a dissenting vote, while Bowman chose to abstain. Milan and Bowman stated that Powell's arrangement as interim chairman "should be limited to a clear and finite timeframe, at least one week," but they "could support a maximum term of one month." DoubleLine Capital CEO Gundlach said investors would not see an interest rate cut at the next US Fed policy meeting. "Previously, expectations were for two interest rate cuts this year, but the inflation market is simply not cooperating," Gundlach said. "In my view, when the two-year Treasury yield is nearly 50 basis points above the federal funds rate, it is simply impossible to cut interest rates." Gundlach said Kevin Warsh, who was just confirmed as Fed Chairman, is taking office during a "difficult period." Gundlach said: "DoubleLine's model suggests that the leading digit of the next CPI reading will be '4'." In addition, according to the CME "FedWatch": the probability of the US Fed holding rates unchanged through June is 99.2%, with a 0.8% probability of a cumulative 25-basis-point interest rate cut. The probability of the US Fed holding rates unchanged through July is 95.0%, with a 0.7% probability of a cumulative 25-basis-point interest rate cut and a 4.2% probability of a cumulative 25-basis-point rate hike. (Jin10 Data) Ed Yardeni, president and chief investment strategist at Yardeni Research, said that as investors grow increasingly concerned about inflation, the US Fed needs to keep pace with the bond market or risk losing control over borrowing costs. He noted that given the current market environment is "no longer" suited for an easing stance, the US Fed should remove its easing bias at the June meeting. "If the US Fed fails to remove this bias, investors will conclude that the US Fed is falling behind the inflation curve and will demand a higher inflation risk premium," Yardeni said. "We expect the US Fed to hold rates unchanged at the June meeting and shift to a tightening policy stance."Yardeni added that the current economic backdrop no longer justified a dovish lean, let alone interest rate cuts. On the contrary, he believed that a more hawkish Warsh than the market expected could actually benefit Trump by helping to suppress long-term Treasury yields. (Jin10 Data) Data: The US May NAHB Housing Market Index and China's April total electricity consumption YoY (TBD) were scheduled for release today. Also noteworthy: the State Council Information Office held a press conference on the national economic performance; the National Energy Administration publishes total electricity consumption data around the 15th of each month; the G7 finance ministers and central bank governors meeting was held through May 19. Crude oil: As of 11:41, oil prices in both markets rose, with WTI up 2.21% and Brent up 1.83%. US-Iran tensions escalated again, as Netanyahu spoke with Trump to "discuss the possibility of resuming military operations against Iran." Trump warned, "Time is running out for Iran, they'd better act fast or they'll get nothing. Time is of the essence!" Brown Brothers Harriman's Global Head of Market Strategy Elias Haddad noted: "The Strait of Hormuz blockade will continue to be the dominant driver for markets, as there is no clear resolution in sight, and the global oil inventory buffer is shrinking rapidly. Therefore, crude oil prices face further upside risk, which will simultaneously weigh on global bond and equity markets." (Wallstreetcn) Iraq's new Oil Minister Basim Mohammed Khudair stated at a press conference on the 16th that the country exported approximately 10 million barrels of crude oil through the Strait of Hormuz in April, far below the roughly 93 million barrels per month before the US-Israel-Iran conflict broke out. Khudair said Iraq currently plans to increase the flow through the pipeline connecting Kirkuk in Iraq to the port of Ceyhan in Turkey to boost exports. However, unless the war ends, Iraq's crude oil exports cannot return to pre-war levels. Iraq plans to engage in dialogue and cooperation with the Organization of the Petroleum Exporting Countries (OPEC) to enhance the country's export capacity. (Jin10 Data) In addition, Ukraine's Security Service said Ukraine struck a refinery and two oil pumping stations in Russia's Moscow region. Meanwhile, a latest opinion poll in Japan showed that amid crude oil undersupply, 70% of Japanese citizens believed the government should call for energy-saving measures. Recently, Japan's crude oil imports plummeted, and the country has released strategic petroleum reserves twice, sparking widespread concern. Kyodo News conducted a telephone survey from the 16th to the 17th, asking the public about issues including the undersupply of crude oil and its derivatives. The survey released on the 17th showed that 70.5% of respondents believe the Japanese government should call for measures to conserve energy and resources. Regarding naphtha, a key raw material for plastic production, 70.6% of respondents said they "feel uneasy" about its undersupply. (Jin10 Data) Spot market overview: ► ► ► ► ► ► ► ► ► ► ►

The 2026 SMM London H1 Seminar concluded on April 29 with great success, bringing together global metals and commodities leaders for a day of high-level dialogue and actionable insights. The seminar drew over 160 valid pre-registrations and more than 100 on-site attendees, gathering core practitioners, senior experts, research scholars and institutional representatives across the global non-ferrous metals industrial chain. Centered on copper, aluminum, lead and zinc, the event delivered in-depth insights into current industry performance, supply-demand shifts and future market outlooks. It also featured two high-level panel sessions with distinguished guests, who exchanged views on key industry highlights such as geopolitical impacts, global trade restructuring, cross-market arbitrage and divergent commodity fundamentals. The event comprehensively reviewed the macro backdrop of commodities as well as opportunities and risks in base metals, offering professional references and forward-looking insights for global non-ferrous market participants. SMM Industry Analysis: Copper, Aluminum, Nickel, Lead & Zinc Geopolitics and Metals: Pricing the New Global Risk Premium How rising geopolitical tensions are reshaping global supply chains, macro risk, and base metal price formation. Dr. Yanchen Wang, Managing Director of SMM Global UK Ltd., provided analysis on macro trends and the aluminum and nickel markets. From a macro perspective, he noted that global economic uncertainty has intensified, with the IMF cutting global GDP growth forecast. China's exports may serve as a key economic pillar in 2026. Power sector investment increased significantly from January to February 2026. The State Grid Corporation of China will ramp up investment during the "15th Five-Year Plan" period. In terms of the aluminum market, Chinese smelters saw improved profitability and higher operating rates. Weak demand in Q1 combined with rising aluminum prices drove inventory to rise. Outside China, new aluminum capacity additions in Indonesia in 2026 are expected to be substantial, with SMM estimating approximately 950,000 mt of new aluminum smelting capacity potentially coming online in Indonesia in 2026. Angola is attracting Chinese investment thanks to its hydropower advantages. In the nickel market, given the Indonesian government's tightening of quotas, SMM estimates Indonesia's RKAB supplementary quotas this year at approximately 15%-20%. In terms of supply outside China, constrained by a lack of new projects, imports from the Philippines are expected to remain at around 19 million mt. Considering the impact of the rainy season on production, the market is expected to maintain a tight balance. Shairaz Ahmed, Principal Market Analyst & Client Advisor at SMM, shared insights on the global copper market. He noted that global copper cathode demand will continue to grow from 2025 to 2030, with demand potentially reaching around 32 million mt by 2030 in an optimistic scenario. China's copper concentrates still rely on imports, and global copper concentrates supply will remain tight from 2026 to 2028, with the downward trend in spot TC not yet over. Meanwhile, global copper cathode production growth will slow down in the future, and the market will most likely fall into a supply deficit from 2027 to 2030, providing long-term support for copper prices. Yueang He, Senior Lead & Zinc Analyst at SMM, interpreted the lead-zinc market trends for 2026. Looking at the global zinc concentrates market in 2026, he stated that although production in China, Africa, and some projects continues to ramp up, production cuts at large mines are suppressing overall supply, with China's zinc concentrates production estimated to be up 4.8% YoY to 3.95 million mt in 2026; European smelting, affected by electricity prices fluctuations, may see selective minor production cuts of 60,000-100,000 mt. Overall, the zinc concentrates market in and outside China will maintain a tight balance in 2026, with refined zinc showing a surplus in China and a deficit ex-China. In terms of lead market, he stated that global lead mine supply is gradually recovering, but the concentrates market remains tight, and TC is unlikely to rebound significantly in the short term. He estimates that the loose supply situation in the global refined lead market will persist until 2028, with high visible inventory on both exchanges combined with slightly soft battery demand in China limiting the upside room for lead prices. Panel Session — Positioning and Price Signals: What Are Commodity Markets Telling Us? Understanding market positioning, inventory signals, and cross-market arbitrage. Moderator: Shairaz Ahmed, Principal Analyst & Client Advisor at SMM Panelists: David Lilley, Director and Co-CIO at Drakewood Capital Management Limited Maruis Van Straaten, Metals Research Analyst at Squarepoint Gregory Shearer, Head of Base Metals and Precious Metals Strategy at J.P. Morgan Loic Jonchery, Base Metals Trader at Gunvor The panelists focused on current mainstream cross-market arbitrage strategies, emphasizing the need to closely track premiums and futures price spreads across various commodities, while comparing price spread performance across upstream and downstream categories such as cathode materials, scrap, and intermediate products, leveraging signals to identify arbitrage opportunities. The current market is subject to multiple influences including policy constraints, supply adjustments, and changes in industry rules, with the overall landscape becoming increasingly fragmented. China's policies have imposed a supply ceiling, compounded by industry framework adjustments and lengthy implementation cycles, keeping small and medium-sized enterprise operations and the supply side persistently tight, increasing market friction, and creating significant uncertainty in arbitrage trading. In this complex environment, price spread fluctuations have amplified and ranges continued to widen, with enhanced trend continuity in underlying markets; combined with cross-regional approval processes and circulation restrictions, traditional arbitrage logic has broken down and trade execution difficulty has increased. At the sub-sector level, the copper market attracted high attention, while structural distortions in nickel and other categories became prominent, making conventional arbitrage and sales models difficult to execute consistently; quality arbitrage opportunities concentrated among entities with balance sheet advantages, while ordinary participants became more cautious in decision-making, with overall trading behavior turning more conservative. Overall, the guests believed that there is no universally applicable, low-risk cross-market arbitrage strategy in the current market. Logic across different sub-markets has diverged significantly, and conducting related trades requires thorough assessment of policy, circulation, and fundamental risks. Panel Session: Superpowers and the Battle for Base Metals Moderator: Dr. Yanchen Wang, Managing Director of SMM Global UK Ltd. Panelists: Natalie Scott-Gray, Senior Metals Analyst, Middle East, North Africa and Asia, StoneX Max Layton, Global Head of Commodities Strategy, Citi Helen Amos, Managing Director and Commodities Analyst, BMO Capital Markets Amy Gower, Executive Director, Head of Metals and Mining Commodities Strategy, Morgan Stanley Amy Gower stated that since H2 last year, they have held a structurally bullish view on aluminum fundamentals: China's aluminum capacity is approaching its ceiling, and combined with expectations of incremental supply from Indonesia, the bullish logic for the aluminum industry is concentrated in H2. Currently, supply-side tightening in the aluminum market has gradually materialized, but the tightness has not been fully reflected in futures prices, and is instead more evident in strengthening spot premiums. Year-to-date, three-month aluminum has risen 18%, with European spot premiums at 27%. In addition, the guests noted that due to geopolitical factors, countries are increasingly prioritizing self-sufficiency and controllability of critical material supply chains, rather than relying on globalized supply allocation. Combined with various policy interventions, the previously freely flowing global commodities market is gradually moving toward regionalization and localized fragmentation. On the trade front, markets have become more unpredictable, and understanding the market is crucial. Some guests mentioned that interest rate trajectory is a key variable, and they expect that after interest rates decline from 2027 to 2028, supply-demand and inventory dynamics will further materialize. Meanwhile, upgraded supply chain governance and the normalization of strategic reserves across countries will provide long-term support for commodities price resilience. Session 4: How Do SMM Data and Information Products Empower Commodities Decision-Makers? As a globally renowned non-ferrous metals price assessment platform, Shanghai Metals Market (SMM) is committed to providing superior data to clients worldwide, empowering them to make more precise decisions. SMM understands that in a complex and ever-changing market environment, accurate and timely data is the key to success. To this end, SMM has built a comprehensive data platform covering multiple metals including copper, aluminum, lead, zinc, and nickel. Taking the copper market as an example, the SMM database covers the entire industry chain from mines, smelting, trading, and inventory to downstream demand, offering over 10,000 key indicators across sub-categories such as copper cathode, copper scrap, copper concentrates, copper anode, and sulphuric acid, including real-time spot prices, futures data, supply-demand balance tables, operating rates, and social inventory, comprehensively meeting clients' analytical needs. To make data access simpler and more convenient, SMM launched the SMM Excel Add-in. Users need no programming or API knowledge to browse, select, and sync massive amounts of data with a single click within the familiar Excel environment. In addition to easy-to-use data tools, SMM also offers professional price membership services and in-depth market analysis reports. Whether you are a trader who needs real-time price references, an analyst who relies on granular data to build models, or an enterprise manager seeking market insights, you can find the right solution at SMM. Coffee Break and Networking With this, the 2026 SMM H1 London Seminar has come to a successful conclusion. SMM sincerely appreciates the strong support from all industry peers and partners.

Editor's Note: During the Labour Day holiday when the Chinese market was closed, global macro developments, commodity markets, and ex-China policy dynamics continued to evolve, with multiple external factors potentially impacting post-holiday market performance. To help market participants accurately grasp market trends and conduct rational market analysis, SMM has systematically compiled key macro developments and major industry news during the holiday, along with a summary of this week's critical data and event periods, for industry reference. Internationally, geopolitical developments, energy landscape, ex-China monetary policy, and trade policy all saw significant changes. Geopolitical tensions resurfaced, intermittently disrupting global energy markets and briefly driving international oil prices into a rapid short-term rise. Major global central bank policies continued to diverge. The US Fed released its latest policy signal — New York Fed President Williams publicly stated on Monday that if inflation continues to pull back toward the 2% policy target, the US Fed will cut interest rates at an appropriate time. Meanwhile, the Reserve Bank of Australia announced its third consecutive rate hike on Tuesday, raising the cash rate from 4.1% to 4.35%, officially reversing its previous accommodative monetary policy cycle, further widening the divergence in global liquidity landscape. On the energy export front, according to Bloomberg on May 4, US crude oil exports continued to climb over the past nine weeks, with cumulative exports exceeding 250 million barrels, surpassing Saudi Arabia to reclaim the position of the world's largest crude oil exporter. Global trade and foreign exchange markets also saw notable shifts. In trade, according to CCTV News, on May 1 local time, US President Trump stated that due to the EU's failure to fulfill a previously agreed trade deal, the US would impose additional tariffs on automobiles and trucks imported from the EU next week, raising the rate to 25% — subsequent changes in the global trade landscape warrant continued attention. In the foreign exchange market, Japan intervened in the currency market three times between April 30 and May 4. A relevant official from Japan's Ministry of Finance simultaneously interpreted related IMF rules, explicitly classifying the three-day intervention operations as a single operation, with a clear intent to stabilize the yen exchange rate. On industrial policy, Indonesia introduced resource export control measures, planning to levy export taxes and windfall taxes on coal and nickel products, which may impact global energy and non-ferrous metal supply chains, pricing systems, and related commodity markets. This week, major economic data in and outside China will be released in quick succession. Highly watched data including China's foreign exchange reserves, gold reserves data, China's import and export data (TBD), and US April non-farm payrolls data will be published sequentially. Meanwhile, SMM will comprehensively review price movements across metal categories during the holiday, and combining the latest variables in and outside China, is expected to publish post-holiday market trend outlooks to provide professional reference for industry trading, production, and strategic planning. Stay tuned. ※Holiday Macro News ►Domestic [Baiyun Airport Port Sees Record-High Canton Fair Foreign Arrivals Exceeding 540,000] On the last day of the Labour Day holiday, coinciding with the closing of the 139th Canton Fair, reporters learned from the Baiyun Border Inspection Station that since the opening of this Canton Fair, as of 0:00 on May 5, Baiyun Airport port handled over 1.14 million inbound and outbound passengers, up 14.5% YoY. Foreign business travelers became the core driver of port passenger flow growth, with inbound and outbound foreigners exceeding 540,000, up 20.8% YoY, setting a new historical record for port passenger flow during the same Canton Fair period. (CCTV News) [National Railways Carried Over 100 Million Passengers Cumulatively During Labour Day Holiday] According to China State Railway Group Co., Ltd., national railways carried 20.383 million passengers on May 4. Since the launch of Labour Day holiday transport on April 29, national railways have cumulatively carried 117 million passengers, with transport operations safe, stable, and orderly. On May 5, return passenger flows continue to rise, with national railways expected to carry 23 million passengers and 2,225 additional passenger trains planned. (CCTV News) [China Bulk Commodity Price Index at 132.1 Points in April, Up 20.2% YoY] The China Federation of Logistics and Purchasing released the April China Bulk Commodity Price Index on May 5. The index stood at 132.1 points in April, up 1.7% MoM and up 20.2% YoY. Among the 50 bulk commodities under key monitoring by the federation, 38 saw MoM price increases in April. Among them, paraxylene, methanol, and polypropylene led the gains, up 22.4%, 14.5%, and 11.8% MoM respectively. ►Overseas [US Illegal Tariff Refunds Delayed by One Day, Earliest Distribution Starting May 12] US Customs and Border Protection (CBP) stated that the first batch of electronic refunds for tariffs ruled illegal by the US Supreme Court is expected to begin distribution no earlier than May 12. The US Court of International Trade had previously expected refunds to start on May 11, but this has been delayed by one day for undisclosed reasons. (CCTV News) [Senior Iranian Commander: Iran Is Controlling the Strait of Hormuz, US Cannot Reverse the Current Situation] Senior commander of Iran's Islamic Revolutionary Guard Corps Yadollah Javani confirmed in an interview on May 4 that Iran is controlling the Strait of Hormuz, that any passing vessel must obtain Iranian permission to ensure safe passage, and that hostile forces' ships attempting forced transit will be dealt with resolutely. Yadollah Javani dismissed US President Trump's claim of "clearing" the strait's shipping lanes for humanitarian reasons as a lie, stating that Iran would prevail if the confrontation escalated. He said the US could never restore the situation to before February 28, nor reverse the current state of affairs. (CCTV News) [Trump refuses to confirm whether US-Iran ceasefire agreement remains in effect] On May 4, US President Trump refused to clarify whether the ceasefire agreement between the US and Iran remained in effect during an interview. When asked whether the ceasefire had ended and whether military strikes could resume, Trump said: "I can't tell you that. If I answered, you'd say this guy isn't smart enough to be president." Earlier that day, Trump warned in an interview that if Iran attempted to attack US ships in the Strait of Hormuz or the Persian Gulf, they "will be totally destroyed." However, he subsequently stated that from a military standpoint, the conflict with Iran was "essentially over." (CCTV) [Qatar condemns attack on UAE oil tanker in Strait of Hormuz] Qatar's Ministry of Foreign Affairs issued a statement on the 4th, strongly condemning a drone attack on an oil tanker operated by Abu Dhabi National Oil Company of the UAE while passing through the Strait of Hormuz, calling it a serious violation of international law and the principle of freedom of navigation. The statement said Qatar firmly opposes using the Strait of Hormuz as a pressure tool, called for the unconditional reopening of the strait, and emphasized that freedom of navigation through this vital waterway is an established principle that cannot be compromised. The statement noted that the continued closure of the strait would jeopardize the vital interests of countries in the region. Qatar's Ministry of Foreign Affairs reaffirmed its support for all measures taken by the UAE to protect its assets. (Xinhua) [US Fed "No. 3" speaks: Interest rate cuts will eventually come if inflation pulls back, but timing has been forced to delay] New York Fed President Williams publicly stated on Monday that as long as inflation pulls back toward the US Fed's 2% target as expected, the US Fed will eventually need to cut interest rates . However, due to inflation running higher than expectations this year, the timing of interest rate cuts has been forced to delay, though the overall policy direction has not fundamentally changed. Williams told reporters after delivering a speech in New York on Monday: "As inflation moves lower, we will eventually need to cut interest rates at some point to match fundamentals. Inflation has been higher than previously expected this year, and in my view, this only delays the timing of rate cuts and does not change the overall policy logic." Last week, the US Fed decided to keep the benchmark interest rate unchanged, but internal policy disagreements became prominent, with three officials opposing the easing bias implied in the meeting statement, preferring more neutral language to release signals that rates could move either up or down going forward. Regarding the controversial wording, Williams was clear in his stance: he fully endorsed the current statement's language, believing that based on day-to-day economic data, there was no sufficient reason to support a rate hike in the short term. [IMF Chief Warns: Prolonged Middle East Conflict Could Trigger More Severe Inflation and Growth Shocks] The head of the International Monetary Fund (IMF) warned that inflation has begun to intensify, and if the Middle East war continues into 2027 with oil prices rising to around $125 per barrel, the global economy could face a "worse scenario." IMF Managing Director Georgieva stated that the continuation of the war means the organization's previous assumption of only a mild slowdown in global economic growth and only a slight edge up in prices no longer holds. Therefore, the "adverse scenario" set by the IMF has effectively begun to materialize. Speaking at a conference hosted by the Milken Institute, Georgieva noted that long-term inflation expectations remain anchored for now and financial conditions have not yet tightened, but this could change if the war persists. [RBA Raises Rates by 25 Basis Points as Expected — Entering Wait-and-See Mode After "Triple Hike"?] The Reserve Bank of Australia (RBA) announced its third consecutive rate hike on Tuesday, raising the cash rate from 4.1% to 4.35%, completely reversing last year's monetary easing cycle. The move underscored the central bank's determination to suppress stubborn inflation, making it an outlier among major global central banks — decisively embarking on a new tightening cycle while the US-Iran conflict fueled uncertainty and many central banks chose to stand pat. The RBA's nine-member policy committee approved the rate hike with a vote of 8 in favor and 1 against . RBA Governor Michele Bullock will hold a press conference at 1:30 PM Beijing time to explain the policy decision. The committee emphasized in its statement: "After three rate hikes, monetary policy now has sufficient room to respond to changing conditions , and the committee will focus on its dual mandate of price stability and full employment, taking all necessary measures to achieve its objectives." [Japan Intervened to Boost Yen on "3 Consecutive Days" During Holiday, Claims It "Counts as 1" Under IMF Rule of "Maximum 3 Interventions Within 6 Months"] Japan intervened in the foreign exchange market on three consecutive days during Golden Week, but Japanese officials promptly cited IMF rules stating that the three actions "count as one" — a statement reflecting the government's careful calculation of intervention frequency. A Ministry of Finance official told reporters on May 5 that under relevant IMF regulations, foreign exchange market interventions over three consecutive business days are considered a "single action."The official made the above remarks while accompanying Finance Minister Satsuki Katayama at an international conference held in Samarkand, Uzbekistan. By this calculation, the three interventions on April 30, May 2 (Friday), and May 4 (Monday) were counted as one combined action. The official added that even when Japan was on public holiday, interventions could still be counted as long as global markets were open; May 4 was therefore recognized as the last of three consecutive business days starting from April 30. This round of intervention began on April 30, triggered when USD/JPY broke above 160.72. According to Bloomberg's analysis, authorities deployed approximately $34.5 billion that day to support the yen, and the exchange rate rebounded to around 155. However, the effectiveness of the subsequent two interventions diminished notably—the yen briefly strengthened after each intervention before pulling back again. The two subsequent interventions reportedly cost a combined approximately $20 billion. In total, the three interventions in this round are estimated to have exceeded $54 billion in scale. ※Industry News and Corporate Developments [Indonesia Plans to Impose Export and Windfall Taxes on Coal and Nickel to Ease Subsidy Pressure] Indonesia plans to impose export taxes and windfall taxes on coal and nickel as one of the measures to offset the growing subsidy costs in the national budget. Indonesia's Finance Minister Purbaya Yudhi Sadewa stated that the proposed measures are still under discussion with the Ministry of Energy and Mineral Resources. "Discussions with the Energy Ministry are ongoing, but what is clear is that the related revenue will be sufficient to help bridge the subsidy gap." Purbaya noted that coal and nickel exports had not previously been subject to export taxes, creating regulatory loopholes that could foster under-invoicing and smuggling, while also limiting customs authorities' ability to inspect goods before shipment. The implementation of export taxes is expected to grant the Directorate General of Customs and Excise (DJBC) greater authority to conduct inspections before goods are exported, thereby helping to close tax loopholes and prevent fiscal leakage. (Wallstreetcn) [250 Million Barrels of Crude Oil Shipped Outside China, US Inventory Falls for Four Consecutive Weeks—How Long Can the World's "Last Supplier" Hold Out?] Over the past nine weeks, a large number of tankers sailed intensively toward the US, loading up along the coast of Alaska and the Gulf of Mexico before heading to destinations such as Japan, Thailand, and even Australia. During this period, the US cumulatively exported over 250 million barrels of crude oil outside China, once again surpassing Saudi Arabia to become the world's largest crude oil exporter. Against the backdrop of the Strait of Hormuz nearing shutdown and Middle Eastern supply disruptions, the US has effectively assumed the role of a critical global energy source. However, this rapid surge in export volume also exposed potential risks. US domestic inventory has been declining notably, with total crude oil and refined product reserves falling for four consecutive weeks and dropping below historical averages, while the production side also faced pressure to maintain output. (Jin Shi Data) [Trump: US Is Taking "Hundreds of Millions of Barrels of Oil" from Venezuela] On May 4, US President Trump spoke at a small business summit on the topic of energy cooperation with Venezuela. Trump stated that the US currently has a "good relationship" with Venezuela and said related actions were "going well." He noted that major energy enterprises had begun entering Venezuela to develop resources. On energy cooperation, Trump said the US was obtaining "hundreds of millions of barrels of oil" from Venezuela and shipping them to US regions including Houston for refining, describing the bilateral relationship as "almost like a partnership." He also emphasized that US oil and natural gas production had reached record highs. (Wallstreetcn) [Trump: Will Impose 25% Tariff on EU Cars and Trucks Exported to the US Next Week] According to CCTV News, on May 1 local time, US President Trump stated that because the EU had not fulfilled the trade agreement already reached between the two sides, the US would impose additional tariffs on cars and trucks imported from the EU next week, raising the rate to 25%. Trump said that if relevant enterprises set up factories and produced in the US, they could be exempt from tariffs. [Hainan LNG Phase II Project Achieved Major Milestone, Expected to Be Fully Completed by 2027] According to PipeChina, a major oil and gas infrastructure project in China — the Hainan LNG Phase II Project — completed the 821-mt dome air-raising operation for Tank No. 3, marking a major milestone for the project. The Hainan LNG receiving terminal Phase I project has construction completed and commissioned 2 LNG storage tanks of 160,000 m³ each, while the Phase II project is constructing 3 new prestressed concrete full-containment LNG storage tanks of 220,000 m³ each. Currently, the overall progress of the Phase II project is approaching 50%, and it is expected to be fully completed by 2027. Once completed, it will add 400 million m³ of gas storage capacity, doubling the peak shaving capacity, and significantly enhancing emergency peak shaving and secure supply capabilities for the entire Hainan Island and the South China coastal region. (CCTV News) [Dongyang Guangming: Subsidiary Signs Computing Power Service Procurement Framework Contract with Estimated Total Value of 16 Billion to 19 Billion Yuan] Dongyang Guangming announced that its subsidiary Dongguan Dongyang Guang Cloud Computing Technology Co., Ltd. signed a Computing Power Service Procurement Framework Contract with a certain Enterprise A, with an estimated total contract value ranging from 16 billion yuan to 19 billion yuan (tax inclusive). The contract term is 60 months after order acceptance, with service fees paid monthly. This cooperation aims to deepen the company's presence in AI computing power and high performance server supporting services, but faces multiple uncertainties including policy and regulatory risks, performance capability, and funding, with uncertain impact on the company's future performance. ※Weekly Macro Preview May 6 Data to be released include China's April RatingDog Services PMI, France's March industrial output MoM, France's April Services PMI final, Germany's April Services PMI final, Eurozone April Services PMI final, UK April Services PMI final, Eurozone March PPI MoM, US April ADP employment, and US April Global Supply Chain Pressure Index. Also notable: 2028 FOMC voter and St. Louis Fed President Musalem will speak on the economic outlook and monetary policy. May 7 Data to be released include France's March trade balance, Switzerland's April seasonally adjusted unemployment rate, Eurozone March retail sales MoM, US April Challenger enterprise layoffs, US initial jobless claims for the week ending May 2, US March construction spending MoM, US April New York Fed 1-year inflation expectations, and China's April foreign exchange reserves. Also notable: 2027 FOMC voter and Chicago Fed President Goolsbee will participate in a panel discussion at a conference. May 8 Data to be released include Germany's March seasonally adjusted industrial output MoM, Germany's March seasonally adjusted trade balance, UK April Halifax seasonally adjusted house price index MoM, Switzerland's April consumer confidence index, Canada's April employment, US April unemployment rate, US April seasonally adjusted nonfarm payrolls, US April average hourly earnings YoY, US April average hourly earnings MoM, US May 1-year inflation expectations preliminary, US May University of Michigan consumer sentiment index preliminary, and US March wholesale sales MoM. Also notable: 2026 FOMC voter and Cleveland Fed President Hammack will speak; FOMC permanent voter and New York Fed President Williams will speak; China's refined oil products will enter a new price adjustment window. May 9 Data to be released include China's April trade balance in US dollar terms (TBD) and China's April trade balance (TBD). Also notable: Chicago Fed President Goolsbee and San Francisco Fed President Daly will participate in a panel discussion at the Hoover Institution's 2026 Monetary Policy Conference.

Although recent conflicts in the Middle East have caused short-term volatility in gold prices, the medium- and long-term outlook remains positive as high geopolitical risks, increasing fiscal deficits, and continued buying by central banks will continue to support the price of the precious metal.

On April 14, a delegation from SMM Information & Technology Co., Ltd. (SMM), including Ye Jianhua, Director and Supervisor of SMM's Industry Research Department, Feng Chundi, Expert at SMM's Industry Research Institute, and Wu Tao, SMM's Copper and Tin Overseas Marketing Manager, visited Chambishi Copper Smelter Limited (CCS) for exchange and survey. The delegation received warm hospitality from CCS's leadership. During the visit, both parties engaged in pragmatic communication based on their respective core businesses. Leveraging its core strengths in non-ferrous metal price index R&D, industry chain big data monitoring, copper market analysis and forecasting, in-depth industry research, and global non-ferrous resource connectivity, SMM shared insights on international copper market operating logic and price trend analysis with the enterprise, in the context of the current global copper smelting supply-demand pattern, raw material procurement landscape, and TC fluctuation trends. As a core copper smelting producer outside China, CCS provided a detailed introduction to its production and operation status, smelting process advantages, capacity release pace, raw material procurement, and product exports layout, and elaborated on the practical experience of ex-China copper smelters in production management, cost control, green production, and localized operations. Meanwhile, both parties exchanged views on common industry topics including development pain points of the copper smelting industry outside China, raw material supply security, finished product circulation and trade, industry policy changes, and low-carbon smelting development trends. They also reached preliminary consensus on future directions such as industry chain information sharing, market data exchange, joint market analysis, and industry resource coordination, laying a solid foundation for deepening regular exchanges and promoting high-quality collaborative development of the copper smelting industry chain. Introduction to Chambishi Copper Smelter Limited (CCS) Chambishi Copper Smelter Limited (CCS) is the first large-scale modern pyrometallurgy copper smelting enterprise invested by China overseas, entirely self-designed and constructed. Located in the Zambia-China Economic and Trade Cooperation Zone, the company has 170 Chinese staff and 1,600 Zambian employees. The company has always focused on its vision of "building an internationally first-class smelting enterprise with enduring prosperity," upheld the corporate spirit of "self-transcendence, continuous breakthroughs, and pursuit of excellence," benchmarked against first-class standards with meticulous craftsmanship, and continuously strengthened and optimized enterprise management, with its comprehensive competitiveness steadily improving. As of the end of 2024, the company had produced over 3.3 million mt of copper products and 8.7 million mt of sulphuric acid, with cumulative sales revenue of approximately $21 billion, effectively driving local economic development in Zambia and becoming a shining pearl along the Belt and Road! Enterprise History and Development Achievements (Pursuing Excellence, Benchmarking Against the Best and Forging Ahead) To extend the industry chain and retain more added value locally, in 2006, China Nonferrous Metal Mining (Group) Co., Ltd. cooperated with Yunnan Copper to introduce the advanced ISA copper smelting process to Zambia, with shareholding ratios of 60% and 40% respectively. From the design stage, the Company drew on successful experience in China and incorporated the characteristics of Zambian raw materials to re-optimize and re-innovate the key processes and technologies of the ISASMELT process, strengthening system integration. This resulted in multiple innovative achievements, including "Integration Innovation and Application of ISASMELT Furnace" and "Comprehensive Automated Control System," which were awarded the First Prize for Scientific and Technological Progress by China Nonferrous Metals Industry Association (CNIA) in 2010. The ISASMELT furnace campaign life broke world records multiple times, with the second campaign reaching 218 weeks and the third campaign reaching 244 weeks, establishing an international benchmark. In 2021 and 2022, the Company's copper production exceeded the designed capacity of 250,000 mt for two consecutive years, making history. In 2024, production further surpassed 260,000 mt, setting a new historical record. In September 2013, the Company was honored with the title of Advanced Collective of Central State-Owned Enterprises. In July 2021, it was successfully selected as a Benchmarking Enterprise under the administration of the State-owned Assets Supervision and Administration Commission of the State Council (SASAC). Process Flow (Dedicated and Professional, Striving for Excellence to Drive Development) The Company adopts the internationally advanced and mature process of "oxygen-enriched top-blown submerged bath smelting, electric furnace settling and separation, PS converter blowing, and anode furnace pyrometallurgy refining" to produce copper anode, and employs the "double-conversion double-absorption" process to produce sulphuric acid. Adhering to the concept of sustainable development, the Company has built a slag flotation recovery system with a daily processing capacity of 1,500 mt of furnace slag, and a bismuth recovery system with a daily processing capacity of 6 mt of flue dust, continuing to recover metals such as copper, cobalt, and bismuth from smelting slag and flue dust. Social Responsibility (Cooperation and Sharing, Giving Back to Society with Strong Responsibility) The Company actively practices its core values of "Dedication, Cooperation, and Sharing," consistently focusing on its core business of copper pyrometallurgy smelting, engaging in extensive cooperation with upstream and downstream clients, and sharing development achievements with employees and local communities. Since its establishment, the Company has cumulatively paid over $300 million in various taxes and fees in Zambia, created over 5,000 employment opportunities, and cooperated with more than 300 local suppliers, contributing to Zambia's green, harmonious, and shared development. The Company actively fulfills its social responsibilities by increasing investment in social welfare programs for local communities in Zambia, covering infrastructure, education, healthcare, and sanitation. These efforts include sponsoring the renovation of clinics in Kalulushi, supporting the Bushifire Orphanage, donating the construction of classrooms at Buyantashi School, Luato Market, Kankuko Bridge, Chibuluma Community Tennis Court, Chimfunshi Chimpanzee Rescue Center, and Modern Stars Football Club, among others. With a cumulative investment of over $4 million, the Company has earned high praise from local government and warm welcome from the public, establishing a strong corporate image. The Company actively promotes employee localization and continuously achieves skills transfer. The company invested over 5 million Kwacha, and externally carried out technical and non-technical training programs in electric welding, electrical power, pneumatics, technical control, management supervision, and equipment maintenance through the China-Zambia Vocational and Technical College, the TEVETA Fund, and other channels. Internally, through mentorship programs and other approaches, the company conducted business training in masonry, fitting, and other skills. The localization rate of the company's employees reached over 92%, the skills of local employees were significantly enhanced, and technical expertise was exported to the DRC. Vision and Outlook (Staying True to Our Original Aspiration, Building Tomorrow with a Shared Destiny) Innovation-driven development knows no bounds. Over the past decade and more, the company has upheld a sense of survival crisis and market competition awareness, adhered to innovation-driven development, and achieved high-quality growth. In 2021, the company's information technology infrastructure was completed and successfully put into use, with a commitment to building an automated, digitalized, and intelligent factory. In August 2023, the company's anode furnace pyrometallurgy refining system technical renovation project was completed and put into operation. In November 2024, the company's three-year action plan for technology-empowered safety and environmental protection was officially finalized, focusing on technology empowerment and fostering new quality productive forces, propelling the company's high-quality development to a new level. Through collaborative development, benchmarking against first-class standards, technological innovation, and increased production and efficiency, the company continues to advance toward its corporate vision of "becoming an evergreen, world-class smelter." The conference is scheduled to be held on September 15–16, 2026 in Lusaka, Zambia. You are cordially invited to participate! Conference Contact : Wu Tao: 18270916376 jennywu@smm.cn

According to Deutsche Bank's analysis, as central banks around the world continue to increase the share of gold in their reserve assets, the precious metal still has room for further gains. Sachdeva, Mallika, a strategist at the bank, noted in a report published on Monday that as monetary policymakers seek tools to hedge against geopolitical turmoil, gold's share in global central bank reserves has risen from about 10% in the 1990s to 30% today. Meanwhile, the US dollar's share in foreign central bank reserves has fallen from over 60% to 40%. Sachdeva said: "The gap between the dollar and gold's share in reserves is now only 10 percentage points, which is extremely noteworthy." The London-based strategist believes that central banks appear to be reversing the 1990s trend, when they shifted asset allocations from gold to the US dollar. Sachdeva also acknowledged that about 80% of the increase in gold's share of central bank reserves was due to the rise in gold prices themselves rather than new purchases. Last year, gold posted its strongest annual gain since 1979 — ironically, the year of the Iranian Revolution. Over the past 12 months, gold prices have risen by more than 40% cumulatively. However, Sachdeva pointed out that central bank purchases still accounted for a significant share of the growth in reserve holdings, and it was often central bank buying that drove gold prices higher. He said: "Therefore, there is an endogenous link between purchases and prices, and the two together have driven the increase in gold's share." Gold has long been regarded by investors as a safe-haven asset during times of global conflict. Since 2022, this attribute has continuously driven investors toward gold — first due to the Russia-Ukraine conflict, and then the US and Israeli strikes against Iran. The strategist said that the next move in gold prices will partly depend on how much gold and US dollars emerging economy central banks will ultimately hold. Deutsche Bank's analysis of International Monetary Fund (IMF) data showed that since the global financial crisis, all central bank gold purchases have come from emerging market central banks. Sachdeva further stated that even if total foreign exchange reserves in emerging markets decline to $5 trillion, as long as they set a target of 40% for gold's share in their reserves, gold prices could reach $8,000 per ounce over the next five years. This level would be approximately 70% above current gold prices.

【SMM Steel】The UK TRA released an SEF for interim findings on an AD investigation into S.Korean hot rolled steel plates. The TRA prefers imposing duties only on plates >600mm but 600mm scope, due to an Economic Interest Test. Full scope duties would hurt downstream UK industries (renewables, shipbuilding) that depend on imports. Narrow plates are produced domestically. Proposed duties: 7.04-22.27% for narrow plates vs 5.98-24.28% for full scope. Public comments due by May 21, 2026. The injury period: Apr 1, 2021 - Mar 31, 2025; investigation period: Apr 1, 2024 - Mar 31, 2025.