[SMM Analysis] Steel Billet Sees Notable YoY Growth, UAE's Decline Hits a New Low By product: Steel billet continued to achieve high growth, while HRC remained the product with the largest decline. In January-May 2026, China's cumulative steel billet exports reached 6.76 million mt (compared with 4.72 million mt in the same period last year), a substantial increase of 2.04 million mt, with growth momentum still strong. This was mainly due to periodic supply-demand mismatch in overseas supply chains and the subsequent impact of global buyers' active inquiries to China, especially the marginal support from purchasing sentiment in markets like Southeast Asia. In contrast, HRC exports plummeted from 10.51 million mt in the same period last year to 7.21 million mt, a decrease of 3.3 million mt, closely related to the implementation of anti-dumping policies on HRC outside China and the high base effect. Data Source: SMM, General Administration of Customs By country: Singapore replaced Djibouti as the top contributor to growth. Its product breakdown pie chart clearly shows that bars (61%) and wire rod (12%) formed the dominant products, together accounting for 73%. As a global shipping and trade settlement hub, Singapore's significant growth was mainly due to concentrated procurement and trade settlement by ASEAN and China-invested construction projects there, providing strong support for China's exports of bars, wire rod, and related infrastructure supporting products. On the decline list, the UAE (down 1.18 million mt), Brazil (down 850,000 mt), Vietnam (down 780,000 mt), and Saudi Arabia (down 570,000 mt) were the main losers, mainly affected by geopolitical uncertainties in the Middle East and the direct impact of trade barrier policies in some regions. Data Source: SMM, General Administration of Customs Outlook According to SMM's latest data on steel export orders, the US-Iran conflict remains volatile in the short term, and amid uncertainty, Middle Eastern buyers will be relatively cautious in procurement. China's export price advantage over other markets continues to narrow, and the overall export order volume is unlikely to improve significantly. However, considering the noticeable decline in sheets & plates transactions last week, some recovery is expected in the short term. Data Source: SMM Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[India] This week, the assessed CFR Europe price for Indian HRC fell 10 USD/tonne to 640 USD/tonne (FOB indications at 560–570 USD/tonne). Although nominal CFR offers remained at 650–660 USD/tonne, actual transaction prices for large orders have been pushed down to 635–640 USD/tonne (small orders quoted at 650 USD/tonne and above). Over the past two weeks, EU clients have ordered a total of around 100,000 tonnes, prompting Indian steel mills to rush shipments; currently, of the EU's total HRC quota of 149,319 tonnes for India, less than 50,000 tonnes remains uncleared, with shipments concentrated in July-August to ensure arrivals at ports from end-August to early September. Additionally, trade with the Middle East has been disrupted by shipping and port congestion, and the detailed rules for sharing quotas under the EU free trade agreement remain uncertain.

The Turkish Steel Exporters' Association (CIB) said in a statement on July 7 that total steel exports from Turkish steel mills rose 23.3% MoM to 2.1 million mt in June, driven by strong demand from key export destinations and increased shipments. Rebar remained the main export product for Turkish producers, with exports rising 62.2% MoM to 445,500 mt in June. Exports of almost all steel products increased MoM in June, except for hot-rolled coil and welded steel pipe. HRC exports fell 5.1% MoM to 324,500 mt, while welded steel pipe exports declined 1.8% MoM to 169,000 mt.

On July 14, data from the General Administration of Customs showed that China exported 10.32 million mt of steel in June 2026, down 21,000 mt MoM or 0.2% MoM. Cumulative exports from January to June reached 54.874 million mt, down 5.6% YoY. In June 2026, China imported 441,000 mt of steel, down 10,000 mt MoM or 2.2% MoM. Cumulative imports from January to June were 2.696 million mt, down 11.3% YoY. Table 1: Overview of Steel Imports and Exports, January-June Source: SMM Steel Exports Remained High in June According to SMM's June export production schedule survey, planned HRC export volume for the month stood at 1.05 million mt, slightly lower than actual exports in May, with a relatively limited decline. Meanwhile, SMM export order data showed that steel export orders remained high in mid-April, laying the foundation for high steel exports in May-June. Table 2: China’s Total Steel Exports Source: SMM Steel Imports Stayed Low in June On the import side, steel imports in June were 441,000 mt, down MoM. January-June cumulative imports were 2.696 million mt, down 11.3% YoY. Net steel exports reached 52.178 million mt. Short-Term Steel Export Outlook 1. Global Manufacturing Declined MoM; Domestic New Export Orders Recovered Marginally According to J.P. Morgan global PMI data, the global manufacturing PMI stood at 52.2 in June 2026, still in expansion territory but with momentum slowing for a second consecutive month, mainly due to earlier stockpiling to avoid Middle East shipping risks, while preventive stockpiling demand waned in June. In addition, end-use consumer goods demand in Europe and the US was weak, global export orders fell below the 50 mark, and the ASEAN composite PMI dropped 1 point MoM, with regional sentiment cooling significantly. China's manufacturing new export orders index at 50.1% in June, up 1.5 percentage points MoM, pointed to a marginal recovery in external demand. 2. Supply Outside China Rose MoM; Overall Supply Pressure Intensified Global crude steel production fell 0.3% YoY to 157.9 million mt in May 2026. In China, against a severe backdrop of finished steel destocking falling short of expectations and losses, steel mills proactively brought forward maintenance plans to defensively control output. Excluding China, production in the rest of the world rose 28.8% YoY. The Asian market was unusually resilient, with India's crude steel production recording 14.1 million mt. Meanwhile, Vietnam's production surged 27.2% YoY, driven not by a stress response to trade barriers but by downstream manufacturing entering a concentrated stockpiling phase, coupled with genuine demand from infrastructure projects rushing to meet deadlines ahead of the monsoon season. In contrast, production in the Middle East plunged 19.4% YoY in May, with previous war damage from geopolitical conflicts and wartime energy controls remaining an invisible and heavy ceiling suppressing production resumptions in the region. Production regions in Europe and the US (the US up 9.2% YoY, Germany up 7.3% YoY) maintained relatively active operating rates, supported by new-type data center infrastructure and anticipatory moves to preempt regional trade barriers such as the EU's Carbon Border Adjustment Mechanism (CBAM). It is reported that the Middle East recently started offering billet exports and concluded deals. Meanwhile, increased production in India, Vietnam and others also put some pressure on domestic exports. Figure 1: Global Crude Steel Production by Region Source: SMM 3. Price Advantage Narrowed Significantly; Pressure on Export Orders Intensified As of July 16, 2026, HRC export quotations (FOB) for India, Turkey, and the CIS were $510/mt, $408/mt, and $530/mt, respectively, while China's HRC export quotation (FOB) was $493/mt. Currently, China's HRC export quotations are $17/mt, $115/mt, and $37/mt lower than those countries. China's steel export price advantage narrowed significantly MoM from June. The overseas market remained in the off-season, and low-price export promotion remained the main channel for them to relieve domestic pressure. In China, prices remained relatively firm supported by costs. The price spread between Chinese and overseas markets narrowed markedly, intensifying pressure on export orders. Figure 2: HRC Quotations in Major Global Markets Source: SMM 4. Export Orders Remained at Low Levels in May-June; A Sudden Increase Is Difficult According to SMM's latest steel mill export order schedule, planned HRC exports for this month totaled 1.059 million mt, up 5.2% MoM from actual exports last month. SMM's steel export order data showed that due to the ongoing overseas off-season and consecutive overseas price declines, steel export orders in May-June declined significantly MoM from the previous period. Figure 3: SMM Steel Export Order Volumes Source: SMM 5. Anti-Dumping Cases with Impact Increased in June New anti-dumping related cases in China increased in June, involving products such as steel pipes, coated sheets, cold-rolled, stainless steel, hot-rolled, and medium-thickness plates. Details of the cases and their impact volumes are shown in the table below. Table 3: New Anti-Dumping Cases in June Source: SMM Overall, against the backdrop of the overseas off-season coupled with a narrowing price advantage, the weakness in earlier export orders may gradually be reflected in export data. SMM expects that actual steel exports in July will face some downward pressure. However, as overseas prices continue to pull back and hit bottom, some new procurement demand may be released. Figure 4: Steel Exports and Forecast, 2024-2026 Source: SMM Source Declaration: All data other than publicly available information is processed by SMM based on public information, market communication, and SMM's internal database models, and is for reference only and does not constitute any decision-making advice. Note: This article is original content of this official account. If you need to reprint, whitelist, or cooperate, please contact us. Without permission, no one may reprint, modify, use, sell, transfer, display, translate, compile, disseminate, or otherwise disclose the above content to any third party or permit any third party to use it. Otherwise, Shanghai Metals Market (SMM) will pursue legal liability for infringement, including but not limited to claiming contractual breach of contract liability, disgorgement of unjust enrichment, and compensation for direct and indirect economic losses. Scan to Get Free Information

HRC prices: Over the coming year, from 2026 to 2027, China has nearly 40 million mt of HRC capacity projects under planning and construction, with production expected to increase further in 2026. Demand side, China's macro policies are expected to remain accommodative, and the manufacturing sector is likely to continue introducing policies to stimulate consumption, with demand expectations staying resilient. However, affected by anti-dumping measures and export structure adjustments, the decline in HRC exports will weigh on the domestic high-supply pattern. Overall, HRC prices are expected to continue hovering at lows in 2026. But considering that overseas geopolitical conflicts are pushing up inflation expectations and transmitting to commodity prices, coupled with coal and coke prices hitting bottom in 2025 and entering a new recovery uptick cycle, against the backdrop of cost push, the average HRC price may rebound slightly compared to 2025. Looking ahead to the next five years, considering that the peak period of new production capacity has passed, with the accelerated promotion of industry mergers and reorganizations and the continuous optimization of the capacity structure, HRC supply growth is expected to gradually slow down and stabilize starting from 2027. SMM expects that around 2028, a policy package of supply-side production restrictions plus steel export scale tightening may re-emerge, and the improvement in the overcapacity contradiction may bring about a round of upside opportunities for HRC prices. However, unlike the intensity of the 2015 supply-side reforms that were coupled with real estate easing and shantytown renovation destocking policies, after the phased capacity removal ends, the overall downward trend in China's steel consumption will be hard to reverse, which will limit the upside room of this HRC price rally driven by supply-demand imbalance easing. Additionally, the supply-demand pattern of iron ore trending looser will also pull down costs, and HRC prices are expected to come under pressure again after a brief rise. Steel mill profits: Considering that China's surplus steel capacity is resolved through steel exports, this necessitates China's steel prices to stay relatively low to support price advantages and orders, which will also limit the upside room of China's steel prices, steel mill profits are expected to remain at low marginal levels in H2 2026. China Hot-Rolled Coil Annual Supply-Demand Balance （ The line chart represents China's HRC price, and the bar chart represents the HRC balance. ）

On June 9, customs data showed that China exported 10.341 million mt of steel in May 2026, an increase of 844,000 mt MoM, up 8.9% MoM. Cumulative exports from January to May reached 44.554 million mt, down 8.1% YoY. China imported 451,000 mt of steel in May 2026, a decrease of 14,000 mt MoM, down 3.1% MoM. Cumulative imports from January to May totaled 2.255 million mt, declining 12.2% YoY. Table1 – Steel Import and Export Data Overview, January-May Source: SMM Steel Exports in May Crossed 10 Million mt MoM According to SMM's export schedule survey for May, planned HRC exports that month stood at 1.1435 million mt, up 213,500 mt from actual April exports, a 23% MoM increase. Meanwhile, SMM export order data showed that from March to April, domestic export prices held a strong advantage in international markets, and overseas demand for semi-finished products remained present. Export orders reached a periodical high in mid-April, providing some support for May exports exceeding 10 million mt. Table 2– China Total Steel Exports Source: SMM Steel Imports in May Declined MoM On the import side, steel imports stood at 451,000 mt in May, edging down MoM. From January to May, China imported a total of 2.255 million mt of steel, down 12.2% YoY; net steel exports reached 42.299 million mt. Short-Term Steel Export Outlook 1. Global manufacturing diverges notably; US accelerates sharply while domestic new export orders slide from highs Global manufacturing activity showed marked divergence in May 2026. The latest PMI data indicates the US accelerated strongly, rising to 54% from 52.7% in April, though cost surges driven by inflation posed significant headwinds. The Eurozone PMI dropped to 47.5% from 48.8%. India continued to demonstrate resilience: its May manufacturing PMI reached 55%, a three-month high, fueled by robust domestic demand, infrastructure spending, and new business growth. China's new export orders index came in at 48.6% in May, down 1.7 percentage points MoM, reflecting some weakening in export demand. 2. Overseas supply continues to decline, particularly evident in the Middle East World Steel Association data shows global crude steel production fell 1.9% YoY to 153.4 million mt in April 2026. Excluding China, output in the rest of the world slid 4.25% MoM, with production schedule paces diverging significantly across regions. Among markets outside China, India and Vietnam maintained high production levels, mainly benefiting from the structural ramp-up dividends brought by new capacity commissioning. Meanwhile, the US and Germany also stood out in April: the US was directly boosted by seasonal Q2 production schedule expansions in high-end manufacturing sectors such as automobiles, while Germany's four consecutive months of production rebound essentially reflected a strategic inventory build by steel mills in response to raw material price fluctuations. In contrast, Middle East production continued its steep YoY plunge during the month, mainly attributable to wartime energy controls and systemic logistical paralysis triggered by the US-Iran conflict and the full closure of the Strait of Hormuz. Overall, Middle East output remains in contraction. As original recipient countries face a lack of stable supply sources, coupled with the digestion of previous low-priced resources, China's steel export orders may encounter structural opportunities. Figure 1 – Global Crude Steel Production by Region Source: SMM 3. Price advantage remains notable, but Southeast Asian markets show price-cutting behavior to seize market share As of June 5, 2026, HRC export quotations (FOB) from India, Turkey, and the CIS stood at $550/mt, $645/mt, and $535/mt, respectively, while China's HRC export quotation (FOB) was $501/mt. China's HRC export quotations currently stand at discounts of -$49/mt, -$144/mt, and -$34/mt against these countries, keeping its steel export price advantage distinct. Recently, however, Southeast Asia entered its off-season; with domestic demand unable to support elevated prices, there are signs of price reductions to capture orders from the international market and disperse domestic pressures. The price spread between China and Southeast Asia has narrowed somewhat. Figure 2 – HRC Quotations in Key Global Markets Source: SMM 4. Export orders dropped notably in May, with a related slowdown after concentrated procurement According to SMM's latest survey of steel mill export schedules, planned HRC exports this month stand at 1.03 million mt, roughly steady compared with actual exports last month. SMM steel export order data indicates that, affected by holidays, export orders in May declined noticeably from April on a MoM basis. Orders for both flat products and long products slipped, signaling that overseas buyers have slowed their procurement pace after the earlier round of concentrated procurement. Figure 3 – SMM Steel Export Order Volumes Source: SMM 5. HRC faced the most cases entering the enforcement stage in May After the concentrated final rulings of anti-dumping cases in April, anti-dumping cases decreased somewhat in May, involving products including HRC, coiled rebar, section steel, and steel pipes. Specific cases and their affected volumes are shown in the table below: Table – New Anti-Dumping Cases in May Source: SMM Taking all factors into consideration, as the new export orders index narrows somewhat, Southeast Asian markets cut prices to compete for orders, and the significant contraction in export order volumes over the previous two months gradually feeds through to the shipment stage, the cushioning effect from earlier orders will weaken considerably. SMM expects that actual total steel exports in June will face some downward pressure. At the same time, as overseas supply of previously low-priced materials is absorbed and Chinese prices remain competitive, domestic export orders may show a bottoming-out recovery trend. Recent feedback from the Southeast Asian market also indicates new procurement demand for semi-finished products. Figure 4 – Steel Exports and Forecast, 2024-2026 Source: SMM Disclaimer on Data Sources: Except for publicly available information, all other data herein are processed and derived by SMM based on publicly available information, market communication, and SMM's internal database models. The content is for reference only and does not constitute decision-making advice. Note: This article is an original work published on this official account. For requests regarding reproduction, whitelist access, cooperation, or other matters, please contact us. Without permission, the content shall not be reproduced, modified, used, sold, transferred, displayed, translated, compiled, disseminated, or otherwise disclosed to third parties or licensed for third-party use. Upon discovery of any violation, Shanghai Metals Market will pursue infringement liability through legal means, including but not limited to demanding contractual breach of contract liability, return of unjust enrichment, and compensation for direct and indirect economic losses. Scan to Get Free Information

[SMM Analysis] Steel billet sees notable YoY increase, while UAE’s decline hits a new low By product: Steel billet’s increase remains impressive, mainly because previous geopolitical conflicts caused periodic logistical bottlenecks and surging insurance premiums in major billet and slab production areas at some local Middle East EAF mills and BF-based plants. Overseas billet supply faced a vacuum period, directly pushing global buyers to launch massive inquiries with China. Purchasing sentiment strengthened notably in Southeast Asia in particular. According to SMM’s order-taking survey, exports are expected to stay high in the short term. It is also worth noting that Vietnam’s anti-dumping duties on China’s HRC will be implemented on April 17. As a result, total HRC exports to Vietnam in April increased compared with March, driven by a final rush to front-load shipments before the deadline. Exports are expected to pull back again in May. Data Source: SMM, General Administration of Customs By country: Djibouti’s increase topped the list. Its product mix chart clearly shows that HRC (42%) and steel billet (30%) are the dominant products. As the “Gateway to East Africa” and a transshipment hub, Djibouti itself lacks large-scale consumption capacity. This surge is essentially because repeated Red Sea tensions caused large vessels to unload and transship directly in the Mediterranean or south of the Suez Canal, with Djibouti serving as a safe transit point serving East African inland infrastructure projects such as Ethiopia, or shipping onward via smaller vessels to North Africa. As a global shipping and trade settlement center, Singapore saw an increase of 290,000 mt, mainly due to centralized procurement and trade settlement by ASEAN and Chinese-invested construction projects in Singapore, which provided marginal support for China’s exports of bars, wire rods, and other infrastructure-related finished steel products. The UAE dropped 870,000 mt, and Saudi Arabia dropped 450,000 mt. This was primarily due to geopolitical uncertainties in the Middle East, compounded by excessive stockpiling by major Middle Eastern buyers earlier to avoid logistics risks, pushing the Middle East market into a defensive cycle of destocking and slower purchasing. Data Source: SMM, General Administration of Customs Outlook: SMM’s April orders remain at a high level, and May exports are still expected to see increases. According to SMM’s steel export order data, affected by holidays, steel export orders in April dipped slightly by 0.57% MoM from March. However, it is also learned that shipping to the Middle East is gradually recovering, and orders for slabs destined for Southeast Asia saw a significant increase in April. Taking all factors into consideration—with the new export orders index re-entering expansion territory, the export price advantage still significant, and export order performance excellent—SMM expects that China’s steel exports in May will still see growth, with steel billet continuing to play a dominant role. Data Source: SMM Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Analysis] Indian Steel Prices Continued to Weaken, Southeast Asian Procurement Sentiment Remained Cautious From the price spread model, billet/slab: Chinese resources expanded their advantage in the Indonesian market, with the price spread hitting a new monthly low. The inversion between China HRC (FOB) and core ex-China markets deteriorated across the board this week, with multiple indicators hitting historical or periodic highs mid-week, except for the China-India spread which rebounded. Chinese resources are expected to continue offering low FOB prices to Southeast Asia and the Middle East next week, and the price spread matrix is unlikely to narrow significantly in the short term. Meanwhile, considering the approaching EU new regulations, June will be a window period for intense price collapse between Indian and Chinese resources in non-EU markets (such as the Middle East and ASEAN). By sub-market, Indian HRC export prices continued to weaken last week, with suppliers lowering offers to stimulate demand amid an overall sluggish regional market. Vietnam remained the primary export destination for Indian SAE1006 HRC, with August shipment offers gradually declining from $580/mt CFR to $565–570/mt CFR. The price decline was still driven by persistently weak demand, intensified competition among exporters, and widespread market expectations of further regional price declines. According to market rumors, a 30,000 mt cargo of Indian HRC was transacted at $565–570/mt CFR Vietnam last week, below the latest market offer of $572/mt CFR quoted on Friday. However, overall transaction activity remained limited, with Vietnamese buyers mostly adopting a wait-and-see strategy, focusing on the upcoming new monthly HRC price announcements from Formosa Ha Tinh Steel Corporation and Hoa Phat Group before deciding on new procurement plans. Market participants noted that cautious downstream demand and expectations of continued price declines continued to suppress buyer restocking willingness. Overall, the demand environment facing Indian exporters remained challenging. Southeast Asian market: Affected by weak downstream demand and market expectations of further price declines, overall steel trading sentiment remained cautious, with procurement activity continuing to be suppressed. In Vietnam, domestic HRC prices showed a weakening trend due to sluggish new orders and traders maintaining low inventory management. Downstream buyers also mostly adopted a wait-and-see approach, on one hand waiting for local steel mills to announce new monthly offers, and on the other hand closely monitoring China steel futures price fluctuations. Meanwhile, Indonesian suppliers remained among the most competitive sellers in the region, offering HRC to Vietnam at approximately $585/mt CFR, continuing to exert pressure on regional prices. On June 1, Hoa Phat announced its latest price adjustment, lowering HRC offers by $13/mt. Following this announcement, local market transaction prices are expected to continue declining. Overall, seasonal demand weakness, ample market supply, and cautious procurement behavior will collectively keep trading activity in the Southeast Asian market subdued. Turkish market: Affected by the Eid al-Adha holiday, sheets & plates trading in the Middle East and Turkey largely stalled this week, with long and flat product prices remaining stable. By product, as July shipping quota is about to be readjusted, EU buyers' purchasing remained weak, and Turkey's HRC exports to the EU had been quiet since before the holiday. However, as current orders were relatively sufficient, Turkish steel mills were not in a hurry to lower prices to close deals before the quota announcement, but instead focused more on domestic sales. In the long product market, due to regional conflicts and geopolitical tensions in the Middle East causing continued logistics disruptions, China's rebar exports to the Middle East declined. Turkish suppliers successfully captured this market gap, with rebar exports rebounding significantly in April, and exports to Yemen, Africa, and parts of Europe also achieved notable growth. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

Indonesia's HRC exports to Southeast Asia remain active, mainly driven by its price competitiveness, with export FOB offers edging down to 565 USD/tonne. According to SMM research, recent transactions of Indonesian HRC to the Vietnamese market have been concluded at around 585 USD/tonne CFR.

[SMM Steel] US hot rolled coil (HRC) exports totaled 53,666 mt in March 2026, up 10.7% from February but down 11.1% YoY, according to US Department of Commerce data. Export value increased to $59.47 million from $53.52 million in February. Mexico remained the largest destination with 38,520 mt, followed by Canada with 14,609 mt.