On March 27, Dongxing Aluminum achieved its production targets for key products such as electrolytic aluminum, aluminum coils, and aluminum rods in the first quarter. Among them, the output of electrolytic aluminum was 425,800 tons, aluminum coils were 160,100 tons, and aluminum rods were 30,200 tons. The electrolytic cell operation rate reached a maximum of 99.9%, and the on-site conversion rate of molten aluminum reached 95.7%.

National Aluminium Company (NALCO) reported that its 130 kWp rooftop solar project in the Damanjodi mining area had officially commenced operations. Meanwhile, the smelter's 960 electrolytic cells continued to operate at full capacity, with an annual operating scale of approximately 460,000 mt. At present, NALCO is expected to add 500,000-600,000 mt of aluminum capacity. The project is currently in the feasibility study and environmental impact assessment (EIA) stage; however, its progress is constrained by the construction schedule of the power plant.

After the Start of Spring, in the Luotuoquanzi Industrial Park of Xinxing Development Zone in Xinjiang, red factory buildings stand on the Gobi Desert like desert camels. In the dawn, 360 600KA electrolytic cells were successfully powered up and began operating, with molten aluminum surging like lava. This hot land is rapidly emerging as the largest green aluminum production base in Northwest China, injecting low-carbon vitality into the transformation of energy-intensive industries. The project has a total investment of 5.143 billion yuan and is expected to construct an annual production line of 580,000 mt of aluminum, along with a full set of supporting facilities.

An aluminum smelter in Shanxi recently commenced the construction of an electrolytic cell upgrading and replacement project, which involves the installation of 600KA aluminum electrolytic cells. The project is expected to be operational by mid-2026.

An aluminum smelter in Shanxi recently commenced the construction of an electrolytic cell upgrade and replacement project, which involves building 600KA aluminum electrolytic cells. The project is expected to be operational by mid-2026.

Recently, the first prebaked anode electrolytic cell in the electrolysis workshop of the Tongliao Zalhaner 350,000 mt green power aluminum project (Phase II of Zhalhaner Aluminum) undertaken by the Sixth Metallurgical Construction Corporation of China passed the acceptance inspection smoothly, laying a technical foundation for the subsequent fabrication and installation of 70 electrolytic cells and achieving a phased breakthrough in the project construction.

Recently, the project of the aluminum smelter in North Kalimantan, Indonesia, undertaken by the Sixth Metallurgical Construction Corporation, has achieved significant progress—the first batch of 15 electrolytic cells has successfully arrived at the project site and all have been hoisted into place in one go, marking the project's entry into the core equipment installation phase.

Recently, the project of the aluminum smelter in North Kalimantan, Indonesia, undertaken by the Sixth Metallurgical Construction Corporation, has achieved significant progress—the first batch of 15 electrolytic cells have been successfully delivered to the project site and all have been hoisted into place in one go, marking the project's entry into the core equipment installation phase.

Huomei Hongjun Aluminum & Power Co., Ltd. recently achieved a significant breakthrough in the field of ground insulation fault detection for aluminum electrolytic cells. Its "Detection Method for Ground Insulation Fault of Aluminum Electrolytic Cell" was authorized by the Italian Patent and Trademark Office. This method detects the alternating current (AC) voltage component to ground for each electrolytic cell in the series of aluminum electrolytic cells and analyzes and calculates the variation patterns of their AC ground potential amplitudes and phases. When a sudden change occurs in the curve of the AC potential amplitude or phase, it can be determined that a ground fault exists. By calculating the modulus maxima of the derivative function of the variation curve, the location of the faulty cell can be accurately identified. This technology boasts notable advantages such as real-time monitoring and precise positioning, high accuracy and low misjudgment, and strong applicability. This innovative achievement fills a technological gap in the industry and provides strong support for the intelligent and efficient development of the aluminum industry.

[Many "Firsts" in Jiangxi] The first aircraft, the first diesel-wheeled tractor, the first military sidecar motorcycle, the first coastal defense missile, the first artificial satellite of New China, and even the current C919 large passenger aircraft were all born here. [Industrial Advantages] The non-ferrous metal industry is the largest pillar industry in Jiangxi Province. The new connotations of the "dual controls" on energy consumption, the "dual carbon" goals, and high-quality development have set new requirements for the expansion and strengthening of the non-ferrous metal industry. Promoting the further healthy, rapid, and orderly development of the non-ferrous metal industry and enhancing its core competitiveness are inevitable requirements for transforming Jiangxi from a major province of non-ferrous metal resources into a strong province of the non-ferrous metal industry. It is also a crucial measure to facilitate Jiangxi's achievement of carbon peaking by 2030. Relying on Jiangxi Province's abundant non-ferrous mineral resources, the non-ferrous metal industry in Jiangxi has developed rapidly, with its scale continuously expanding and its level steadily improving. It has become the largest pillar industry in Jiangxi, currently a key "trillion-yuan" industry being cultivated in the province, and an undeniable "anchor" of Jiangxi's manufacturing sector. Jiangxi has become an important mining and production site for non-ferrous metals in China. Jiangxi Province boasts superior ore-forming geological conditions and abundant mineral resources, making it one of China's important bases for non-ferrous, rare, rare earth, and uranium minerals, with a relatively high degree of mineral resource complementarity. Jiangxi's seven major types of minerals—copper, tungsten, rare earths, uranium, tantalum-niobium, gold, and silver—are known as the "Seven Golden Flowers." According to Jiangxi Province's "2+6+N" action plan for high-quality and leapfrog development of industries, the province's main business income from the non-ferrous metal industry is expected to reach the trillion-yuan level. To promote the healthy development of Jiangxi Province's non-ferrous metal industry, facilitate foreign economic and trade cooperation, and guide the integration of Jiangxi's non-ferrous metal industry with international standards, the organizing committee, after conducting in-depth market and project analysis surveys at the grassroots level multiple times with government authorities and industry associations, has decided to hold the "2025 China (Jiangxi) International Non-Ferrous Metals and Metallurgical Industry Exhibition" at the Nanchang Greenland International Expo Center from November 23-25, 2025. We look forward to seeing you there! [ Exhibition Schedule ] Registration and Booth Setup: November 21-22, 2025; Opening Ceremony: 9:30 AM, November 23, 2025 Exhibition and Trading: November 23-25, 2025; Dismantling of Booths: 2:00 PM, November 25, 2025 [Scope of Exhibits] Non-Ferrous Metal Raw Materials: Raw materials of non-ferrous metal mineral products such as copper, aluminum, magnesium, titanium, zinc, lead, manganese, zirconium, vanadium, nickel, molybdenum, silicon, antimony, tin, chromium, tungsten, tantalum, and indium; magnetic materials, rare and rare earth materials, precious metal materials, and various alloy materials; Non-Ferrous Metal Products: Copper products, aluminum products, titanium alloy products, magnesium alloy products, powder metallurgy products, etc.; Metallurgical Equipment and Technologies: Smelting furnaces, refining equipment, smelting pumps and valves, conveying equipment, heat exchange equipment, flue gas acid-making equipment, corrosion-resistant equipment, hydrometallurgy equipment, electrolysis equipment, high-power rectifier power supplies, electrolytic cells, extraction equipment, surface treatment equipment, etc.; Metalworking Machine Tools: Lathes, milling machines, sawing machines, drilling machines, grinding machines, punch presses, boring machines, and machining centers. Electrical discharge machines (EDMs), wire-cut EDMs, laser processing equipment, etc.; Metal automation control equipment: frequency converters, fieldbuses, industrial personal computers (IPCs), instruments and meters, automation control, robots, electronic application systems, weighing instruments, and information-based solutions for the equipment manufacturing industry, etc.; Auxiliary materials for metal production: chemicals, solvents, refractory materials, catalysts, gases, lubricating oils, etc.; Powder metallurgy: raw materials, equipment, products, 3D printing, polymer powder materials, ceramic powder materials; Casting, die-casting, and forging: supporting products such as castings, casting equipment, casting materials, casting molds, casting/pouring robots, new casting technologies, various heat treatment furnaces, industrial furnaces, die-castings, die-casting molds, die-casting machines and peripheral equipment, post-processing equipment for die-castings, surface treatment technologies and equipment, die-casting robots, and supporting products for new die-casting technologies, forgings, flanges and ring parts, forging equipment and accessories, surface treatment technology and equipment, automation, forging mold manufacturing technologies and equipment, and forging raw materials. Geological (mine) exploration technology and equipment: geophysical prospecting technology, geochemical prospecting technology, aerial survey and remote sensing technology, surveying and mapping technology, geological data processing, mineral product analysis, and laboratory instruments and meters. Mining technology and equipment: excavation equipment, drilling and rock-breaking equipment, loading equipment, transportation equipment (excavators, loaders, underground mining vehicles, mine dump trucks), hoisting equipment, drilling rigs, construction machinery, etc. [Media Promotion] 65 authoritative financial media outlets, including Jiangxi Daily, Jiangxi TV's Economic Channel, Dajiang.com's Finance Channel, Jiangxi.com, China.com, China Daily Website, and China Finance Online; 10 popular self-media platforms, including Sohu, NetEase, and Toutiao; 53 leading professional media outlets in industries such as China Mining Network, China Excavator Network, China Foundry Network, China Die Casting Network, China Automotive Manufacturing Network, China Nonferrous Metals Network, Nonferrous Metals Information Network, and metalworking, as well as 180 other relevant professional media outlets in other industries; Comprehensive keyword search customer coverage through online search platforms such as Baidu Promotion and 360 Promotion; [Concurrent Events] 2025 China Foundry Technology Innovation Outstanding Contribution Award Ceremony 2025 China Metallurgical Melting and Casting Technology Seminar 2025 China Recycled Metal Industry Chain Integration and Development Forum 2025 China New Energy Vehicle and Auto Body Lightweight Summit Forum 2025 China Green Mine Development Forum [Exhibition Details] ★Standard booth (3m×3m): Domestic enterprises: RMB 9,800 yuan per booth; Foreign enterprises: RMB 15,800 yuan per booth; ★International brand booth (9 ㎡, with luxury decoration): RMB 12,800 yuan per booth; Foreign enterprises: RMB 18,800 yuan per booth; ★Indoor bare space (minimum rental area of 36㎡): Domestic enterprises: RMB 1,000 yuan per ㎡; Foreign enterprises: RMB 2,000 yuan per ㎡; Booth equipment: Two fluorescent tubes, one waste paper basket, display panels, header boards, one table and two chairs, air conditioning, lighting, security, cleaning, etc. Note: No exhibition equipment or facilities are provided in the open space. The special decoration management fees and {{hydropower}} fees charged by the exhibition hall shall be borne by the exhibitors and their special decoration contractors. [Secretariat of the Organizing Committee] Contact Person: Jia Song 150-3826-2376 (WeChat sync) 138-3921-4033 (WeChat sync)