On March 25, the SMM average price of battery-grade nickel sulphate remained stable.

The operating rate of major copper cathode rod enterprises in China stood at 81.51% last week (March 13–March 19), marking the fourth consecutive week of MoM improvement since the Chinese New Year, with industry sentiment continuing to recover. The strong rebound in the operating rate in this round was mainly driven by two factors: first, the relatively weak operating rates of secondary copper rod enterprises, coupled with the price difference between copper cathode and copper scrap remaining at a relatively low level, significantly weakened the substitution effect between copper cathode and copper scrap, leaving more market room for copper cathode rod; second, improving orders for downstream wire and cable and enamelled wire boosted a faster drawdown in enterprises' finished product inventories. As copper prices broke above low-level support, downstream procurement sentiment continued to heat up, and new orders for copper cathode rod enterprises showed a pattern of concentrated volume release. Most enterprises reported that their production pace could no longer keep up with shipment progress, and some had already begun to proactively control the pace of taking orders to ensure contract fulfillment. From the downstream industry perspective, wire and cable as well as enamelled wire enterprises also benefited from the pullback in copper prices, with operating rates steadily rebounding, further boosting demand for copper rod. Inventory side, although the pullback in copper prices boosted enterprises' willingness to restock, constrained by limited room for capacity release, enterprises did not excessively stockpile on dips and mostly maintained normal production raw material reserves. Meanwhile, due to continued downstream pick-up of goods, enterprises' capacity was unable to fully match order demand, accelerating the drawdown of finished product inventories. Enterprises Raise Processing Fees and Increase Margin Requirements to Control Risks After copper prices pulled back sharply, downstream purchase willingness increased significantly, and order concentration rose markedly. To reasonably control the pace of taking orders, some enterprises urgently raised processing fees. At the same time, affected by the increased uncertainty in the pace of cargo pick-up caused by concentrated downstream order placement, as well as the continued decline in copper prices, enterprises became more concerned about the default risk of earlier high-priced orders, and some enterprises simultaneously increased margin ratios to strengthen risk control. Looking ahead, with copper prices rising at present, downstream procurement sentiment has clearly weakened. To ensure stable deliveries, copper cathode rod enterprises are expected to maintain relatively high operating loads. Although rigid demand is gradually being fully released, against the backdrop of low finished product inventories, enterprises will still maintain high operating rates to replenish inventory. Accordingly, SMM expects the operating rate of China's copper cathode rod enterprises to fluctuate at highs in March.

Spot prices of #1 copper cathode in North China against the front-month contract were reported at a discount of 110 yuan/mt to a discount of 50 yuan/mt today, unchanged from the previous trading day, while the average transaction price rose 1,635 yuan/mt from the previous trading day to 95,595 yuan/mt.

Dalian iron ore futures strengthened during the morning session before paring gains in the afternoon. The most-traded I2605 contract settled at 824 RMB per tonne, representing a 0.55% increase from the prior trading day.

[SMM Daily Chrome Commentary: Cost Support Kept Offers Firm, with Limited Recent Market Fluctuations] March 25, 2026: Chrome ore quotations saw no adjustment, while low- and micro-carbon ferrochrome prices were raised somewhat...

[SMM Silicon-Based PV Morning Meeting Summary] Silicon Metal: Spot silicon metal prices remained in a stalemate consolidation. Yesterday, SMM east China oxygen-blown #553 silicon was at 9,100-9,300 yuan/mt, and #441 silicon at 9,300-9,500 yuan/mt, unchanged from the previous day. The quote center of some silicon enterprises was slightly lower than that of trading firms engaging in both spot and futures market, while downstream users mainly transacted at lower prices, and overall market trading activity was subdued. Polysilicon: N-type recharging polysilicon was quoted at 38-47 yuan/kg. Polysilicon prices continued to decline somewhat recently, mainly affected by market sentiment and inventory clearance by some leading enterprises. At present, low-priced polysilicon has already fallen below the cost line of some manufacturers, and the sentiment to hold quotes firm has strengthened somewhat. The upstream market was also still watching wafer price movements.

[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...

[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.

SMM News, March 24: Aluminum ingot: On March 24, SMM A00 aluminum (Foshan) was reported at 23,440, up 30, at a discount of 170 against the current-month contract, narrowing by 5 (unit: yuan/mt) The SHFE aluminum 04 contract generally stabilized today. Supported by aluminum prices halting their decline and edging up slightly, the South China spot market stabilized and improved, and buyers generally showed good purchasing sentiment today. Spot prices were significantly below the monthly average price, and sellers firmly held prices firm. However, amid weekend inventory buildup and ample circulating cargo, overall support for firm prices was clearly constrained under high inventory pressure. Mainstream transaction prices in the market today were concentrated at premiums of -175 yuan/mt to -165 yuan/mt against the SHFE aluminum 04 contract.

Recently, Mingyang Hydrogen’s MYH-K-1000 electrolyzer completed the authoritative evaluation under the China Hydrogen Alliance’s “Leader Program” and received the official test report. With multiple industry-leading performance indicators, it has established a new benchmark for alkaline electrolyzers adapted to fluctuating new energy scenarios, marking a major technological milestone for the company in the field of hydrogen energy equipment. This product is the first 1,000 Nm³/h-class alkaline electrolyzer on the China Hydrogen Alliance’s field-testing platform to achieve the “15th Five-Year Plan” target of 20%–120% ultra-wide flexible load regulation . At the 20% minimum load, it can stably control hydrogen content in oxygen to within 1.5%, enabling long-term stable operation. It also features rapid load response capability of 5%/s to 10%/s. Its core performance is industry-leading and perfectly suited to the flexible operating conditions of wind and solar power generation, providing robust support for the development of the green fuel industry. The test certification presentation ceremony was held at Mingyang Hydrogen’s Beijing Center. Yu Tianxiao, Director of the Quality Value Center at Guoneng Hydrogen Innovation and Deputy General Manager of Hydrogen Testing Technology, presented the certification report to Pan Yongle, Executive Director and CEO of Mingyang Hydrogen, and both parties witnessed this important moment together. Rigorous Field Testing Validates Outstanding Performance, Strong Results Under Extreme Cold Conditions According to the alliance’s field-test data, under 100% rated load, the MYH-K-1000 kept hydrogen content in oxygen below 0.5% and successfully passed load ramp-up and ramp-down tests at 3%/s and 5%/s. Under the ultra-low load of 20%, hydrogen content in oxygen remained compliant, while DC power consumption was as low as 3.85 kWh, achieving efficient and stable operation. This long-duration test was conducted throughout in an outdoor environment at minus 20°C . The product still demonstrated excellent cold and hot start capabilities, as well as high reliability, high safety, and fully flexible operating characteristics, overcoming the longstanding low-temperature operating limitations of traditional electrolyzers and enabling adaptation to more extreme application scenarios. Breakthroughs in Core Technology Innovation Set a New Industry Benchmark This electrolyzer adopts advanced integrated die-casting technology, delivering high consistency in its internal structure. The area of its electrolysis unit is 75% larger than that of traditional designs, and it overcomes sealing challenges on the basis of zero-electrode-gap technology, significantly improving product performance and production efficiency and setting a new technological benchmark for the industry. Company Statement: Continuous Innovation-Driven Development and Deepening Commitment to Hydrogen Energy Equipment Pan Yongle, CEO of Mingyang Hydrogen, stated that this certification is the result of the team’s technological breakthroughs. The company will continue to uphold the philosophy of “innovation-driven, green future,” further increase R&D investment, launch more high performance products, provide global clients with high-quality hydrogen energy solutions, and support the industry’s high-quality development.