[SMM Daily Brief Review of Coking Coal and Coke] In terms of supply, with costs remaining high, most coke producers saw wider losses and began to push for a coke price hike, but losses remained within an acceptable range, and coke production stayed stable. On the demand side, steel trading improved somewhat, steel mills became more willing to produce, and daily average hot metal production continued to increase, further boosting rigid demand for coke. Overall, coke fundamentals shifted toward tightness, but steel mills showed only average acceptance of higher coke prices, and the coke market may remain generally stable with slight rise in the short term.

[SMM Cast Aluminum Alloy Morning Comment: Aluminum Prices Halted Their Decline, but Wait-and-See Sentiment Remained Unchanged; Rangebound Movement May Continue in the Short Term] Spot market, yesterday the overall ADC12 market continued to hold prices steady. Aluminum prices showed signs of halting their decline, but market sentiment recovered only limitedly, and enterprises generally chose to postpone price adjustments and mainly adopt a wait-and-see stance. Demand side, downstream orders did not improve significantly, and just-in-time procurement remained the main approach, with mediocre transaction performance. Against the backdrop of easing cost-side fluctuations and insufficient demand support, ADC12 prices may continue to fluctuate within a range and remain relatively stable in the short term, with relatively limited momentum for price adjustments. Further attention should still be paid to aluminum price trends and the recovery of end-use demand.

On March 25, the SMM average price of battery-grade nickel sulphate remained stable.

[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.

The operating rate of major copper cathode rod enterprises in China stood at 81.51% last week (March 13–March 19), marking the fourth consecutive week of MoM improvement since the Chinese New Year, with industry sentiment continuing to recover. The strong rebound in the operating rate in this round was mainly driven by two factors: first, the relatively weak operating rates of secondary copper rod enterprises, coupled with the price difference between copper cathode and copper scrap remaining at a relatively low level, significantly weakened the substitution effect between copper cathode and copper scrap, leaving more market room for copper cathode rod; second, improving orders for downstream wire and cable and enamelled wire boosted a faster drawdown in enterprises' finished product inventories. As copper prices broke above low-level support, downstream procurement sentiment continued to heat up, and new orders for copper cathode rod enterprises showed a pattern of concentrated volume release. Most enterprises reported that their production pace could no longer keep up with shipment progress, and some had already begun to proactively control the pace of taking orders to ensure contract fulfillment. From the downstream industry perspective, wire and cable as well as enamelled wire enterprises also benefited from the pullback in copper prices, with operating rates steadily rebounding, further boosting demand for copper rod. Inventory side, although the pullback in copper prices boosted enterprises' willingness to restock, constrained by limited room for capacity release, enterprises did not excessively stockpile on dips and mostly maintained normal production raw material reserves. Meanwhile, due to continued downstream pick-up of goods, enterprises' capacity was unable to fully match order demand, accelerating the drawdown of finished product inventories. Enterprises Raise Processing Fees and Increase Margin Requirements to Control Risks After copper prices pulled back sharply, downstream purchase willingness increased significantly, and order concentration rose markedly. To reasonably control the pace of taking orders, some enterprises urgently raised processing fees. At the same time, affected by the increased uncertainty in the pace of cargo pick-up caused by concentrated downstream order placement, as well as the continued decline in copper prices, enterprises became more concerned about the default risk of earlier high-priced orders, and some enterprises simultaneously increased margin ratios to strengthen risk control. Looking ahead, with copper prices rising at present, downstream procurement sentiment has clearly weakened. To ensure stable deliveries, copper cathode rod enterprises are expected to maintain relatively high operating loads. Although rigid demand is gradually being fully released, against the backdrop of low finished product inventories, enterprises will still maintain high operating rates to replenish inventory. Accordingly, SMM expects the operating rate of China's copper cathode rod enterprises to fluctuate at highs in March.

SMM Morning Meeting Summary: Overnight, LME copper opened at $12,016.5/mt. After dipping to $11,955.5/mt in early trading, its center rose sharply to a high of $12,160/mt, and then continued to hover at highs, finally closing at $12,092.5/mt, down 1.05%. Trading volume reached 23,000 lots, open interest stood at 293,000 lots, up 406 lots from the previous trading day, mainly reflecting increased short positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 93,600 yuan/mt and touched a low of 93,480 yuan/mt at the open. Its center then moved higher to a high of 94,990 yuan/mt, after which copper prices maintained a fluctuating trend at highs, finally closing at 94,670 yuan/mt, up 0.17%. Trading volume reached 51,000 lots, open interest stood at 198,000 lots, down 533 lots from the previous trading day, mainly reflecting reduced short positions throughout the day.

[SMM Daily Chrome Commentary: Cost Support Kept Offers Firm, with Limited Recent Market Fluctuations] March 25, 2026: Chrome ore quotations saw no adjustment, while low- and micro-carbon ferrochrome prices were raised somewhat...

[SMM Daily Review: High-Grade NPI May Still Have Downside Room Under the Dual Pressure of End-Users and Steel Scrap] March 24 News: SMM's upstream sentiment factor for high-grade NPI was 2.88, up 0.01 MoM, while the downstream sentiment factor for high-grade NPI was 1.59, down 0.04 MoM.

[SMM Silicon-Based PV Morning Meeting Summary] Silicon Metal: Spot silicon metal prices remained in a stalemate consolidation. Yesterday, SMM east China oxygen-blown #553 silicon was at 9,100-9,300 yuan/mt, and #441 silicon at 9,300-9,500 yuan/mt, unchanged from the previous day. The quote center of some silicon enterprises was slightly lower than that of trading firms engaging in both spot and futures market, while downstream users mainly transacted at lower prices, and overall market trading activity was subdued. Polysilicon: N-type recharging polysilicon was quoted at 38-47 yuan/kg. Polysilicon prices continued to decline somewhat recently, mainly affected by market sentiment and inventory clearance by some leading enterprises. At present, low-priced polysilicon has already fallen below the cost line of some manufacturers, and the sentiment to hold quotes firm has strengthened somewhat. The upstream market was also still watching wafer price movements.

SMM, March 25: During the day, the most-traded SHFE lead 2605 contract opened at 16,495 yuan/mt. After the opening, driven by broad gains across the nonferrous metals complex, prices quickly surged to an intraday high of 16,590 yuan/mt, then fluctuated lower, giving back part of the gains and moving slightly around the daily average line. Near the close, the SHFE lead price center edged higher, fluctuating rangebound within the 16,488-16,542 yuan/mt range, while the tug-of-war between longs and shorts eased. It finally closed at 16,495 yuan/mt. A small bullish candlestick was recorded, up 75 yuan/mt, or 0.46%. Primary lead suppliers held prices firm, and premiums in Jiangsu, Zhejiang, Shanghai were raised slightly. Coupled with tight circulating supply caused by maintenance at some secondary lead enterprises, this supported lead prices. Downstream buyers mainly purchased as needed. As secondary lead prices inverted against primary lead prices, spot orders showed a stronger preference for primary lead. Overall, spot support remained strong, providing downside support for lead prices, but with more downstream bargaining and a lack of strong upward momentum, prices are expected to remain rangebound in the short term. Data source disclaimer: Except for public information, all other data is processed and derived by SMM based on public information, market communication, and SMM's internal database models, and is for reference only and does not constitute decision-making advice.