Announcement No. 20 of 2026 has officially come into effect, clarifying that China will resume levying consumption tax on lithium-ion batteries from September 1, 2026. The policy adopts a tiered tax rate mechanism: the period from September 2026 to August 2027 will serve as a policy transition period, with the consumption tax rate applied at 2%; from September 1, 2027, the rate will be officially raised to 4%.

Entering late July, China's tungsten market has overall moved into a phase of stage-based consolidation and repair. Following a sustained deep pullback in tungsten prices, low-priced goods in the market have become hard to find, as upstream mines and supplier traders have been hoarding, holding back from selling, and showing a strong willingness to hold prices firm, while the center of spot order transactions has steadily moved higher. Coupled with the boost to market sentiment from long-term contract purchase quotations by leading tungsten enterprises, transaction activity at the mine and APT ends has recently warmed up. However, constrained by the traditional consumption off-season in the industry, downstream end-use demand has yet to see a marked recovery, leaving the overall market in a structurally split pattern, with upstream raw material prices rebounding as suppliers hold prices firm, while downstream demand remains relatively weak. A Tungsten Enterprise Lowers Long-Term Contract Quotations for the Second Half of July A tungsten enterprise has lowered its long-term contract quotations for the second half of July, as detailed below: According to the long-term contract purchase quotations of a tungsten enterprise in Chongyi for the second half of July, the details are as follows: 1. 55% wolframite concentrates: 411,000 yuan/standard tonne, down by 37,000 yuan/standard tonne from the previous quotation; 2. 55% scheelite concentrates: 410,000 yuan/standard tonne, down by 37,000 yuan/standard tonne from the previous quotation; 3. APT (national standard grade 0): 605,000 yuan/mt, down by 55,000 yuan/mt from the previous quotation. Tungsten Prices Bid Farewell to Declines, Notch Two Consecutive Gains Looking back at the trend in this cycle, after the average price of wolframite concentrates rebounded to the previous high of 527,500 yuan/standard tonne in mid-to-early June, the trend continued to weaken. The core drag factor was the persistently sluggish downstream end-use demand, compounded by the ongoing digestion cycle of raw material inventories after earlier concentrated stockpiling by enterprises, which significantly weakened market price support. Starting from June 17, tungsten prices embarked on an overall weak downward path. Compared to the average price of 527,500 yuan/standard tonne on June 16, the average price of 402,500 yuan/standard tonne on July 17 marked a decline of 125,000 yuan/standard tonne over a period of just over one month, a drop of 23.7%. After the rapid pullback in tungsten prices, stage-based bottom support gradually emerged in the tungsten market. The tightening of upstream goods and rising sentiment of holding back from selling and holding prices firm pushed tungsten prices to stop falling and stabilize, then ushered in a two-consecutive-day rebound. According to SMM quotations, the price of wolframite concentrates (≥65%) on July 21 was 410,000~415,000 yuan/standard tonne, with an average price of 412,500 yuan/standard tonne, up 1.23% from the previous trading day. Currently, low-priced goods on the market are quite scarce, and suppliers have generally ceased offloading at low prices. Coupled with the fact that long-term contract purchase prices from leading tungsten enterprises are higher than mainstream spot transaction prices, this has effectively boosted market confidence, driving spot transaction prices to gradually converge with long-term contract prices. Market Outlook Short term, supported by tightening raw material supply and strong sentiment among suppliers to hold prices firm, the tungsten market will mainly see a slight rebound and consolidation at lows in late July, and the market does not yet have the conditions for a significant reversal. A substantial recovery in the market still hinges on the traditional downstream consumption peak season from August to September, driven by end-user order recovery and the release of concentrated restocking demand to push prices higher. Currently, the industry chain has relatively consistent expectations for the seasonal recovery, and some enterprises may gradually begin advance stockpiling at low prices, which is expected to bring marginal improvement to the tungsten market. At present, the tungsten market is at a critical period of stopping the decline and consolidating at lows, with market recovery focused on the upstream raw material side. The downstream tungsten powder and cemented carbide sectors remain trapped in the traditional consumption off-season, with stable end-user operating rates and scarce new orders. Enterprises generally adopt a just-in-time essential restocking strategy, with no large-scale stockpiling activity, unable to support a significant rise in raw material prices. However, the industry chain has formed a broad consensus on the market recovery after August, and advance stockpiling at low prices in the market is gradually increasing, which is expected to drive the industry chain’s marginal improvement earlier. Markets outside China are affected by the summer holiday, with sluggish trading and high prices but no actual transactions, as prices continue to consolidate at high levels, with very low risk of a sharp decline. The divergent pattern between domestic and overseas markets is expected to persist. Going forward, close attention will be paid to four key variables: first, the pace of supply release from domestic mines and changes in suppliers’ holding firm sentiment; second, the pace of downstream cemented carbide end-user operating rate recovery and the strength of concentrated restocking; third, the market guidance role of APT long-term contract prices; fourth, the circulation volume of recycled tungsten scrap and the procurement release of downstream recycled raw materials. Recommended reading:

In H1, the industry showed distinct characteristics: upstream raw material imports experienced a mix of hot and cold trends, while mid-and downstream aluminum processing product exports saw explosive growth. Diverging domestic and overseas demand, shifting overseas manufacturing orders, and changes in the overseas raw material supply landscape are jointly reshaping the trade pattern of China's aluminum industry chain.

In H1 2026, the zinc calcine market was characterized by persistently tight raw material supply, gradually declining supply, and processing fees that rose initially before pulling back.

[2026 Zinc Calcine H1 Review: Tightening Raw Materials, TCs Rising Then Falling] In H1 2026, the zinc calcine market overall exhibited the characteristics of "persistently tight raw materials, gradually shrinking supply, and TCs rising first then falling.

[Cost Squeeze and Overcapacity: 2026 Zinc Oxide H1 Review and Market Outlook] Overall H1 operating run showed a trend of “low-level pullback during Chinese New Year — phased recovery after the holiday — weakening again in the off-season”, with the industry average operating rate in H1 falling 0.11 percentage points YoY.

[2026 Copper Plate/Sheet and Strip Semiannual Review and Outlook: H1 Operating Rate Hits a Five-Year High for the Same Period, Emerging Sectors Underpin Industry Resilience] In H1 2026, after experiencing wild swings in copper prices at the start of the year and the seasonal shutdown during the Chinese New Year, China's copper plate/sheet and strip industry entered a rapid recovery path from March onward, presenting an overall...

SMM statistics show the comprehensive operating rate of China's copper billet enterprises was 46.09% in June, down 3.18 percentage points MoM and pulling back slightly by 0.06 percentage points YoY

According to the latest SMM data, the comprehensive operating rate of China's copper billet enterprises continued its downward trend in June, with a significant polarization pattern between large and small mills. The tightening supply of recycled brass raw materials and the traditional end-use demand entering a deep off-season formed a dual drag, while only orders for copper billets from the new energy and AI supporting sectors provided structural support. Finished product inventories at enterprises accumulated slightly. Based on feedback from sample enterprises, market expectations for the industry in July were generally pessimistic, with the triple headwinds of off-season pressure, raw material bottlenecks, and material substitution resonating. The operating rate is expected to decline further. June industry operating data released, capacity polarization gap continues to widen : According to SMM statistics, the comprehensive operating rate of China's copper billet enterprises was 46.09% in June, down 3.18 percentage points MoM and pulling back slightly by 0.06 percentage point YoY, with overall production staying low. By enterprise scale, large leading enterprises leveraged stable raw material channels, ample capital reserves, and long-term quality client resources to show relatively stronger production resilience, with an operating rate of 52.6% in June; medium-sized enterprises were squeezed by both raw material and order pressures, restricting capacity release, with an operating rate of only 38.76%; small processing plants faced the most prominent pressure, with the operating rate falling to 23.44%, further intensifying the industry’s polarization. Supply-side bottlenecks remain unresolved, with losses continuing to squeeze processing margins : Raw material shortages remain the core pain point constraining copper billet production. Currently, reverse invoicing controls for recycled resources have been continuously tightened, significantly shrinking the circulation of compliant scrap brass in China. The willingness to sell at the recycling end is low, narrowing the procurement channels for domestic secondary copper at processing plants; enterprises have instead increased their purchases of imported recycled brass, but overseas quotations have continued to rise, keeping import procurement costs high. On the one hand, tight supply and purchasing premiums are driving up raw material costs; on the other, weak traditional end-user orders make it difficult to pass on processing charges , leaving most brass billet processing plants stuck in a “raw materials hard to buy, processing unprofitable” dilemma, with industry profit margins being continuously squeezed. Some small and medium-sized enterprises, facing losses from raw material costs, have proactively scaled back production schedules and controlled output to avoid risks, further dragging down the overall operating rate. Demand-side off-season characteristics are prominent, with demand from old and new tracks showing a stark contrast : The seasonal weakening of demand has had a clear impact on the industry. June is the traditional off-season for downstream brass consumption in air conditioning, plumbing, valves, and ordinary hardware. Downstream end-user enterprises purchased as needed, with no concentrated stockpiling. The scale of new orders continued to shrink, and the overall trading atmosphere for brass billets turned sluggish. Demand structure shows significant divergence : Traditional brass category orders continue to weaken, but high-purity copper billet demand provides a strong offset. Three electric systems for NEVs, large-power charging piles, PCS, as well as AI servers, GPU cooling modules, optical module precision pins and other parts continue to release stable rigid demand, driving copper billet enterprise orders to remain steady, becoming the only demand resilience sector in the industry. However, sluggish procurement from traditional end-users drags down the overall shipment pace, copper billet enterprises' finished product inventories continue to accumulate, and inventory pressure gradually emerges , with the stockpiling turnover cycle in plants lengthening and production enthusiasm further dampened. July market outlook: Multiple bearish factors resonate, and the operating rate is expected to decline again , based on frontline survey feedback from national sample copper billet enterprises, market expectations for July industry operation are generally pessimistic; improvement momentum is insufficient in the short term, and multiple negative factors will continue to ferment: raw material bottlenecks have no relief space in the short term, off-season pressure continues to intensify, and structural support is unlikely to boost the overall market. On both the supply and demand sides, SMM expects the comprehensive operating rate of domestic copper billet to fall by 2.44 percentage points MoM to 43.65% in July, down 1.17 percentage points YoY , and the industry's low-level operation is expected to persist. In the short term, the copper billet industry still needs to wait for the recovery of the traditional peak consumption season and a substantial easing in the supply of recycled raw materials before seeing a simultaneous recovery in operating rates and profitability.

[Tungsten Flash] SMM, July 1: The tungsten market mainly saw weak consolidation today. Trading volume at the mine side contracted, downstream smelters had few orders, and with inventories at high levels, enterprises mostly purchased tungsten concentrates and recycled raw materials as needed. Some traders mainly pushed for lower prices. The negotiation center for spot orders of 55% tungsten concentrates was around 440,000-460,000 yuan per standard tonne. SMM 65% tungsten concentrates closed at 491,000 yuan per standard tonne today, down 10,000 yuan per standard tonne from yesterday, but still up 56,500 yuan per standard tonne from early June. Going forward, key focus will be on mine tender transactions and the new round of long-term contract information.