As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.

SMM, March 24: The most-traded SHFE lead 2605 contract opened at 16,435 yuan/mt intraday. After the opening, prices edged lower, and the tug-of-war between longs and shorts intensified. SHFE lead prices fluctuated at lows in consolidation, touching an intraday low of 16,385 yuan/mt. Thereafter, bulls gradually gained strength and prices fluctuated higher, but with insufficient upward momentum, lead prices pulled back again and fluctuated rangebound within the 16,429-16,451 yuan/mt range. Near the close, SHFE lead prices dipped slightly and finally settled at 16,420 yuan/mt. A small bearish candlestick was recorded, up 25 yuan/mt, or 0.15%. In terms of supply, primary lead enterprise quotes saw discounts narrow slightly from last Friday, and spot cargo available for pickup at plants with medium to large discounts decreased significantly; in the secondary refined lead market, fewer merchants offered quotes, with relatively prominent price divergence between upstream and downstream players. Downstream buyers showed limited acceptance of premiums, while upstream quotes stayed firm and willingness to sell remained cautious. On the demand side, downstream enterprise procurement pace was relatively scattered, with most purchases centered on the execution of long-term contracts. Some enterprises replenished inventories on dips based on immediate needs, and overall market transactions were mixed. SMM expects SHFE lead prices to remain in the doldrums in the short term. Statement on data sources: Except for public information, all other data is derived by SMM through processing based on public information, market communication, and SMM's internal database models, and is for reference only and does not constitute decision-making advice.

[SMM Tin Midday Commentary: SHFE Tin Pulled Back Under Pressure in Early Trading After Rebounding, and Spot Transactions Weakened]

Strait of Hormuz disruptions and Iran tensions are driving up aluminum prices and premiums. Aluminium Bahrain and Qatalum have cut output, while feedstock is tight. Rerouting via Port of Sohar or Saudi ports raises costs and delays. Buyers are turning to China, India, Russia, Canada, and scrap to offset risk. Prolonged disruption could reduce Middle East market share and reprice it as higher-risk supply.

According to SMM data, during the second half of the traditional "Golden March" peak consumption season (March 16 - March 20, 2026), the most-traded stainless steel futures contract (SS2605) trended lower from its highs under the dual pressure of macroeconomic headwinds and tepid actual demand. By the close on March 20, the contract retreated to 14,150 yuan/mt (approx. $2,051/mt), down 125 yuan/mt (approx. $18/mt) from last Friday's close of 14,275 yuan/mt (approx. $2,069/mt). The market's core feature this week was the marginal weakening of previous bullish factors: international macro signals tilted hawkish, raw material upward momentum stalled, and the substantive recovery of end-user demand during the peak season remained lackluster, prompting a rational pullback in futures prices after hitting resistance. Macro-Economy: Divergence Between Global Hawkishness and Chinese Resilience On the macroeconomic front, a significant divergence emerged between global and Chinese economic data and policy directions. Internationally, the U.S. Federal Reserve ushered in a "Super Central Bank Week," deciding to hold its benchmark interest rate steady at 3.5%-3.75%. Influenced by developments in the Middle East and sticky inflation, the Fed's latest dot plot—despite maintaining expectations for one rate cut this year and next—revealed a distinctly hawkish tilt. Market bets on rate cuts for the entire year were slashed to less than 11 basis points. The dashed hopes for loose dollar liquidity weighed on the overall valuation of the base metals sector. In China, the National Bureau of Statistics released January-February economic data showing a stable start to the year. Value-added industrial output grew by 6.3% year-on-year, and total retail sales of consumer goods increased by 2.8%, though real estate development investment still fell by 11.1% YoY. This structural divergence indicates a certain resilience in Chinese manufacturing, but the drag from the property sector continues to cap the upward elasticity of end-user consumption. Fundamentals: Destocking Continues, But Spot Market Feels Lukewarm Fundamentally, social inventories maintained a destocking trend, but the spot market still lacked vigor. The latest SMM data shows social inventories falling further to 979,300 mt this week, a decrease of 18,800 mt from last week's 998,100 mt. The continuous decline in inventories sent a positive industry signal, stabilizing market sentiment to some extent. However, the spot market still felt cold. Overall quotes remained stable, and end-user procurement strictly followed a just-in-time purchasing model, failing to exhibit the across-the-board boom expected during a peak season and leading to a strong wait-and-see sentiment. Currently, although the destocking trend is preserved, constrained by high absolute inventory levels and the anticipated supply increment from March steel mill resumptions, traders are maintaining a steady pace of shipments without resorting to aggressive panic selling. Costs: High-Level Loosening Pauses Cost-Driven Logic The cost side also showed signs of loosening from its highs. As of March 20, high-grade nickel pig iron (NPI) quotes ended their previous unilateral rally, edging down to 1,084 yuan/mtu (approx. $157/mtu), while high-carbon ferrochrome prices held steady at 8,650 yuan/50 mt (approx. $1,254/50 mt). With the pullback in futures prices and the sustained caution of steel mills regarding high-priced raw materials, NPI faced resistance in breaching the 1,100 yuan mark. The stabilization of raw material prices at high levels, coupled with slight price concessions, has temporarily alleviated the upward pressure on steel mills' cost centers, bringing the previously strong "cost-driven" logic to a temporary halt. Outlook and Strategy In conclusion, the stainless steel market this week entered a "deep water" zone where peak season expectations are repeatedly tested against reality. The Fed's hawkish stance pressured macro sentiment, while the "tepid" state of just-in-time end-user demand left fundamentals lacking intrinsic upward momentum. However, two consecutive weeks of steady destocking and stable spot quotes have effectively limited the depth of the market's correction. Looking ahead to next week, the market will continue to seek a balance between "high inventories + supply increments" and "continuous destocking + just-in-time demand floor." The key focus will be whether the destocking slope reverses due to concentrated arrivals at steel mills. In the short term, the most-traded SS contract is expected to shift into a broad range-bound trend.

SMM News, March 23: Data brief: As of Monday, March 23, SMM copper inventories in major regions nationwide fell 14.54% WoW from last Monday, with all regions posting significant destocking. Specifically, in Shanghai, the arrival pace of imported and domestic supplies remained normal, while downstream consumption continued to recover on the back of the pullback in copper prices, leading to notable inventory drawdowns; in Jiangsu, downstream consumption also improved significantly amid the sharp pullback in copper prices; in Guangdong, downstream consumption remained highly buoyant, and together with tighter supply, spot inventory dropped sharply. Looking ahead, arrivals of imported and domestic supplies are expected to remain stable, with the overall supply side tending to stabilize; on the demand side, the continued pullback in copper prices will further stimulate downstream procurement demand, and rigid demand is expected to continue to be released. According to survey data, the weekly operating rate of copper cathode rod is expected to rise to 83.76% this week, up 2.25 percentage points WoW. Considering both supply and demand, the market has currently formed a pattern of “stabilizing supply and continued recovery in consumption,” and social inventory is expected to continue destocking this week.

SMM Morning Meeting Summary: Overnight, LME copper opened at $11,816/mt. After dipping to $11,798/mt in early trading, its center rose sharply to a high of $12,395/mt, then hovered at highs, and finally closed at $12,221/mt, up 3.27%. Trading volume reached 52,000 lots, and open interest stood at 292,000 lots, down 944 lots from the previous trading day, mainly reflecting bears cutting positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 95,010 yuan/mt. After the opening, its center moved higher to a high of 95,900 yuan/mt, after which copper prices maintained a fluctuating trend at highs. Near the close, it dipped to 94,530 yuan/mt and finally closed at 93,840 yuan/mt, up 2.12%. Trading volume reached 120,000 lots, and open interest stood at 198,000 lots, down 6,741 lots from the previous trading day, mainly reflecting bears cutting positions throughout the day.

[SMM Chrome Daily Review: Price Gains Slowed, and the Chrome Market Operated Steadily] March 23, 2026 News: Quotations for chrome ore and ferrochrome remained unchanged for the time being...

This week, ferrous metals fluctuated at highs, with raw material ore and coking products outperforming steel. Against the backdrop of the escalating conflict in the Middle East, ore and coking products held up well, supported by higher shipping costs and transmission from coal and coke as energy substitutes. In the second half of the week, supply and demand data for hot-rolled coil and rebar were released. The increase in rebar inventory slowed markedly; however, hot-rolled coil demand was lower than the same period last year, and the pace of post-holiday recovery was relatively slow, leaving steel as a whole with limited upward momentum, while futures retreated after rapid rise. In the spot market, trading in the Chinese market was average this week.....

This week, total rebar inventory stood at 8.3525 million mt, up 57,800 mt WoW, or 0.7% (previously +3.46%). Compared with the same period of the lunar calendar last year, it increased by 281,200 mt, or 3.48% (previously +4.58%).