Over the past half-century of industrialisation, the global seaborne iron ore market took shape and solidified into a "duopoly" supply structure dominated by Australia's Pilbara region and Brazil's Carajás and Iron Quadrangle regions. However, with the evolution of macroeconomic cycles, the structural shift in China's economic growth momentum, and the historic imperative for the global steel industry to transition toward low-carbonisation and green development, this traditional supply landscape is undergoing an unprecedented reshaping. On November 26, 2025, as the first commercial vessel loaded with Simandou iron ore slowly departed Mabariya Port for the open sea, Guinea's Simandou iron mine officially commenced production. As the world's largest and highest-quality greenfield iron ore project, this milestone signalled the gradual rise of the African continent—long relegated to a secondary position—as an important emerging force in the global ferrous metals market. Why should we pay attention to the African market? The African continent's iron ore resources are regarded as the third most important region for global iron ore supply, after Brazil's Carajás region and Australia's Pilbara region. The sheer scale and high grade of its resources account for 13.8% of global iron ore resources. It is also set to be the primary supply-side growth driver over the next five years. Therefore, changes in African iron ore will long remain a key market determining international iron ore prices . This article provides a comprehensive analysis of the current status and landscape of African iron ore and select steel markets, offers an in-depth discussion of future development trends, and presents a data-driven outlook on market changes. I. Global Iron Ore Background According to SMM survey data, as of 2025, global iron ore production is estimated at approximately 2.472 billion mt. Of this, Africa contributed approximately 95 million mt, accounting for nearly 4% of total global production. With the successive commissioning of various large-scale mining projects, Africa's iron ore capacity is expected to double by 2030, reaching a scale of nearly 259 million mt. Assuming no production cuts in other regions, Africa-produced iron ore's global market share is expected to rise to nearly 10%, while the global iron ore market's oversupply is estimated to increase to approximately 220 million mt. (Chart-1: Balance Sheet) Although the international iron ore market has already entered a prolonged cycle of loose supply, the substantive supply shock from African iron ore is expected to materialise gradually only over the next five years. In the short term, based on an estimated 15 million mt of new African shipments in 2026, their outstanding high-grade characteristics are expected to quickly meet steel mills' current demand for low-carbon ore blending, allowing the market to absorb them smoothly, with a relatively mild impact on absolute international iron ore prices. The key point to watch will be from 2028 to 2029. As railway, port, and other infrastructure facilities still under development in Africa are fully connected, the surge in high-grade iron ore production will exert heavy downward pressure on the right side of the global iron ore cost curve. This will not only systematically push down the price center of iron ore but also trigger intense structural squeeze; that is, the survival space for low-grade, high-cost mines will be significantly compressed. This price downcycle is expected to persist through 2028. When international ore prices fall below the marginal cost support level of $90/mt, non-mainstream small mines on the far right of the cost curve will be forced to shut down and exit the market. By then, the global iron ore supply landscape will have completed a new round of reshuffle, re-forming a multi-oligopoly ecosystem dominated by ultra-large, low-cost mines (including new African mines), supplemented by quality mid-sized mines. (Chart-2: Price Forecast Curve) II. African Market Current Landscape: South Africa as the Dominant Leader with Multiple Strong Players, West African Countries Actively Expanding Having analyzed the foundation of the global iron ore market landscape, the focus will now shift to the overall situation in Africa. As the primary driving force behind supply growth over the next five years, Africa's iron ore production is concentrated in West Africa and South Africa. Currently, Africa is dominated by three major countries. Among them, South Africa is the largest producer, with production reaching approximately 67 million mt in 2025, and its export shipments firmly hold an absolute dominant position of approximately 65% of Africa's total iron ore exports. However, constrained by potential structural limitations, the future organic growth potential of South Africa's iron ore industry is relatively limited. As major iron ore projects in other emerging resource-rich African countries successively come into production and release capacity, South Africa's share in Africa's overall export market is expected to face sustained contraction. Next is Mauritania, as Africa's second-largest iron ore producer, with production of 15 million mt in 2025 and export volumes of approximately 12 million mt, accounting for 12% of the African market. Mauritania borders the Atlantic Ocean, possesses abundant high-grade iron ore deposits deep in the Sahara Desert, and enjoys exceptionally favorable geographic location and mineral resources. Moreover, it is within close proximity to European and Middle Eastern markets that urgently need green industrial raw materials, providing it with unique advantages for absorbing the global transfer of green metallurgical capacity. It will be a highly promising iron ore supplier in the future. In addition, Sierra Leone, as another important supply hub in the region, also has an expected production of 12 million mt in 2025, holding a stable share of approximately 12% in the African export market. Chinese-invested iron ore mines within the country are actively expanding their operations. Macro trade flow perspective, based on full-year 2024 trade data, the proportion of African iron ore shipped to the Chinese market was relatively low compared to traditional mainstream mining regions, accounting for only about 60%, while the broader Asian market encompassing China, Japan, and South Korea collectively absorbed approximately 70% of African iron ore shipments. Meanwhile, Western European countries represented by the Netherlands and Germany constituted the core secondary shipping destination for African iron ore, with a trade flow share of nearly 14%. The remaining marginal trade flows exhibited a diversified pattern, radiating broadly to emerging steel capacity clusters in the Middle East, including Bahrain, Oman, and Saudi Arabia. (Chart-3: African Iron Ore Market Overview) Enterprise level, Kumba Iron Ore and Assmang , both based in South Africa, became Africa's largest and second-largest iron ore producers with annual production of 37 million mt and 17 million mt, respectively. Kumba's mines such as Sishen are globally renowned for producing high-grade fines (>62%) and premium lump with excellent physical and metallurgical properties (Premium Lump, Fe 65.2%). Under the current trend of blast furnace emission reduction, this type of lump ore that can be directly charged into furnaces and reduce sintering carbon emissions has been highly sought after by the market, commanding a significant premium. Assmang also possesses high-quality iron ore assets, jointly controlled by African Rainbow Minerals (ARM) and Assore at a 50:50 ratio. Its Assmang fines and Assmang lump (grade at 64-65%) are also high-quality direct furnace charge materials. However, for this enterprise, the biggest bottleneck lies not at the pit head but on the rails. Heavy reliance on Transnet's rail shipping capacity means that logistics bottlenecks frequently cap its shipment volumes. SNIM (Société Nationale Industrielle et Minière de Mauritanie) is Mauritania's state-owned mining company and Africa's third-largest iron ore producer after the two South African companies. Unlike mainstream Australian and Brazilian ore, SNIM's products occupy a unique niche in terms of physicochemical specifications and market segmentation. Its most widely traded product is TZFC fines, characterized by extremely low aluminum (Al2O3) and phosphorus (P) content. As an excellent blending raw material, major steel mills prefer to blend SNIM ore fines with high-aluminum Australian fines (such as certain Pilbara blend ores) to significantly dilute the impurity ratio in furnace charge and optimize blast furnace performance. (Chart-4: Top-Tier Enterprises) III. Transformation of the African Market: Major Producing Countries May Stagnate While Emerging Projects Become Key Growth Drivers So where will future growth come from? According to SMM observations, the African market is expected to undergo significant structural changes over the next five years. Multiple large-scale iron ore projects across African countries are already under construction and plan to commence production before 2030. Based on estimates, Africa's iron ore supply is expected to grow substantially from approximately 95 million mt currently to 260 million mt over the next five years, representing a cumulative increase of up to 85%. The market landscape will also shift from South Africa-dominated exports led by Western players to Guinea-dominated exports. (Chart-5: African Market Production Trend) The primary growth driver will come from Guinea in West Africa. The country's renowned Simandou iron ore mine, jointly developed by multiple enterprises, is currently the world's largest undeveloped high-grade open-pit hematite deposit. With resource reserves exceeding 5 billion mt and a designed capacity of 120 million mt, it is the project with the greatest strategic potential to reshape the existing iron ore market landscape. Since the first ore shipment in late November 2025, as of Q1 2026, Simandou's main export port, Morebaya Port, has cumulatively shipped nearly 1.6 million mt. Blocks 1 and 2, developed under the leadership of the Winning Consortium Simandou (WCS), have been successfully commissioned, with 2026 capacity expected to be achieved and shipments expected to reach full production of 60 million mt within the next 2–3 years. Blocks 3 and 4, which are expected to commence production in Q1 2026, are led by Simfer (a Rio Tinto & Baowu joint venture) and are expected to ship 5 million mt of ore in 2026, reaching full production of 60 million mt over 30 months. In other words, Guinea is expected to reach 120 million mt before 2030, vaulting to become the world's second-largest iron ore project, behind only Brazil's S11D project (with a post-expansion designed capacity of 200 million mt, expected to commence production in 2030). Other countries such as Liberia, Gabon, Sierra Leone, and Congo Republic all have iron ore projects under development, with a combined capacity of approximately 46 million mt planned to commence production by 2030. The largest among these is the Tokadeh Phase II project (Tokadeh Phase II) in Liberia, owned by ArcelorMittal (AML), which is expected to commence production in H2 2026 and reach full production of 20 million mt capacity by year-end, with iron ore concentrate expected to exceed Fe 66%. Given that AML's steelmaking capacity in Europe cannot absorb such a massive increase in the short term, the majority of Tokadeh 's products are expected to flow into the international market for trading, exerting downward pressure on iron ore concentrate prices. Currently, the largest exporting country, South Africa, is expected to largely maintain its production within the range of 63–67 million mt, with a risk of slight decline. The primary reason is that South Africa's iron ore transportation is highly dependent on the heavy-haul railway line (TFR) from Sishen to Saldanha Port. In recent years, Transnet Freight Rail (TFR), under South Africa's national transport company Transnet, has seen a significant decline in transport capacity due to numerous issues including locomotive and rolling stock shortages, frequent cable theft, and prolonged underinvestment in infrastructure, resulting in severely reduced transportation capacity for major bulk commodities such as iron ore and coal. South Africa's largest iron ore mine, Kumba, in its 2025 year-end financial report released in February 2026, indicated that its total finished product inventories reached as high as 7.5 million mt , increasing rather than decreasing compared to 6.9 million mt at the end of 2024. As railway transport capacity failed to match mine production capabilities, major South African iron ore producers were forced to accumulate large inventories at mine sites. To prevent inventory overflow, miners had to proactively lower production guidance. Although miners have been working to address transportation issues, the deep-rooted railway problems are difficult to resolve in the short term. Beyond 2030, there is also Mauritania's SNIM strategic growth blueprint. In the first phase (Horizon 1), the company plans to raise annual capacity to 45 million mt by 2031 through implementing lean production, equipment and technology upgrades, and joint development of new reserves. Of this, 20 million mt will be absorbed by SNIM's own wholly-owned capacity, while another 25 million mt will be achieved through attracting international capital to form joint ventures. Furthermore, SNIM has even set its sights on 2045 (Horizon 3), formulating a long-term goal of raising annual capacity to 80 million mt . In addition, there is the MIFOR project in the DRC. On March 26, 2026, the DRC signed a relevant memorandum of understanding with China, and the MIFOR project was listed as a flagship project with priority support. The mine is estimated to hold cumulative resources of 15 billion to 20 billion mt, with an average grade exceeding 60%. Its potential scale is considered to be approximately 2.5 times that of the Simandou project in Guinea. The first phase of the project is expected to cost $28.9 billion, involving the construction of a heavy-haul freight railway combined with Congo River shipping, ultimately connecting to the Banana deep-water port on the Atlantic coast. Initial annual production is expected to be 50 million mt, with a long-term goal of expanding to 300 million mt per year . All these projects are destined to make Africa an indispensable source of iron ore supply in the future. (Chart-6: Selected African Iron Ore Projects) IV. Global Steel Industry Chain Transformation: Will Africa, as a Hub of High-Grade Ore, Empower DRI Production? Notably, most of Africa's currently operating and planned iron ore projects have an average total iron grade (Fe) largely above 65% , with extremely low impurity content. This scarce high-grade ore is an ideal raw material for the direct reduced iron (DRI) process. As the DRI-EAF green steel route gains traction in Europe, the US, and China, future demand for iron ore with grades of 65% and above will surge exponentially. This will confer an exceptionally high "grade premium" on major iron ore projects including South Africa's Kumba, Guinea's Simandou, and other mines coming into production in the future. In the long run, the pricing benchmark for iron ore is inevitably shifting away from the traditional Platts 62% index, and African miners will gain bargaining leverage when renewing long-term agreements, thereby reshaping the global industry chain profit distribution landscape. In line with the global carbon neutrality trend, international investors, encouraged by local governments, are actively deploying high-value-added processing facilities, including DRI plants and high-grade pellet plants, aiming to fully leverage Africa's abundant high-grade iron ore resources and enormous energy potential for DRI production. Based on SMM's observations, approximately 200,000kt of DRI capacity is expected to emerge in Africa by 2030. The largest project among them is an 8.1 million mt DRI complex located in Libya, a joint venture between Turkish steel mill Tosyali and Libya's national steel company. (Chart-7: African DRI Projects) As China advances its "dual carbon" goals, the steelmaking industry is undergoing corresponding adjustments. China has set out a strategic blueprint for carbon peaking by 2030 and carbon neutrality by 2060. The traditional high-carbon-emission long-process steelmaking route dominated by blast furnace-converter operations is facing extremely stringent capacity replacement policies and environmental protection regulations. Meanwhile, the global trade system is also accelerating the imposition of carbon costs — for example, the implementation of the EU's Carbon Border Adjustment Mechanism (CBAM) — compelling the global steel supply chain to accelerate its transition from the source toward a low-carbon or even zero-carbon "green steel" era. Under this irreversible transformation trend, the short-process route combining DRI with electric furnace (EAF) has become the most commercially feasible decarbonization pathway. To meet the surging global demand for green steel in the future, market forecasts indicate that by the 2030s, global DRI designed capacity will need to increase by hundreds of millions of metric tons. This dramatic expansion in production scale will profoundly reshape the global steel supply landscape. The share of traditional pig iron production will gradually decline, while low-carbon DRI supply will directly determine the competitiveness of major economies in the global green steel market. In particular, the "hydrogen metallurgy" technology, which uses green hydrogen to replace natural gas and coal for iron ore reduction, is widely recognized by the industry as the core to achieving ultimate zero-carbon steelmaking. (Chart-8: Reshaping of the Steel Industry Chain Under Green Transformation) Represented by world-class high-quality iron ore projects such as Simandou in Guinea, the gradual commissioning of these super mines is expected to inject over 100 million mt of high-grade iron ore supply into the global market annually, significantly alleviating the global shortage of DRI-grade ore. More critically, North Africa and West Africa possess solar and wind energy potential that is second to none globally, enabling large-scale green hydrogen production at extremely low costs locally. This perfect combination of "high-grade ore + affordable green hydrogen" has led multinational capital and steel giants to increasingly favor establishing DRI production lines directly on African soil, reducing iron ore locally into low-carbon Hot Briquetted Iron (HBI) that is convenient for transport, before shipping it to electric furnaces in Asia and Europe for smelting. As a result, Africa will formally transition from the old era to become an indispensable part of the green iron production chain.

[SMM Stainless Steel Daily Review] US-Iran Ceasefire Boosted SS Futures Higher, Stainless Steel Spot Market Showed Signs of Warming On April 8, SMM reported that SS futures showed a strengthening and upward-probing trend. Influenced by the US-Iran ceasefire agreement, non-ferrous metal futures generally opened higher in the morning session, with SS futures rising in tandem, closing at 14,325 yuan/mt by the midday session. Spot market side, driven by the news, the strengthening of SS futures lifted spot market activity, with inquiry enthusiasm increasing notably. Although downstream buyers had not yet accepted higher offers, traders' quotes had already edged up. The most-traded SS futures contract strengthened and probed higher. At 10:15 AM, SS2605 was quoted at 14,265 yuan/mt, up 65 yuan/mt from the previous trading day. Spot premiums for 304/2B in the Wuxi area ranged from 155-355 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi remained flat; for cold-rolled trimmed-edge 304/2B coils, the average price in Wuxi remained flat and in Foshan held steady; cold-rolled 316L/2B coils in Wuxi remained flat; hot-rolled 316L/NO.1 coils were quoted flat in Wuxi; cold-rolled 430/2B coils in both Wuxi and Foshan held steady. The stainless steel market is currently in the traditional peak consumption season of "Golden March and Silver April." Downstream demand fundamentals recovered compared with the earlier period, with end-user procurement continuing at a just-in-time pace, and overall trading volume was sufficient to hold quotes firm. However, affected by macro news disturbances and futures fluctuations, downstream end-user clients still maintained a wait-and-see sentiment, showing no willingness to stockpile, and transactions fluctuated with changes in news. Futures side, the Iranian geopolitical conflict...

[SMM Nickel Flash] Supply side, the center of upstream offers continued to decline, with some traders continuously lowering their intended prices. Demand side, the market remained relatively sluggish, and the price spread between high- and low-grade NPI continued to widen. Overall, consumption was relatively weak, and high-grade NPI prices maintained a slight downward trend.

(Kitco News) – BRICS+ nations now hold 17.4% of global gold reserves, up from 11.2% in 2019, while the dollar’s share of global reserves fell to its lowest level since 1994 – and one BRICS member could well buy as much as all other countries combined, according to Michael Harris, technical analyst at EBC Financial Group.

[SMM Chrome Daily Review: Market Operated Steadily after the Holiday, Demand Remained Subdued and Transactions Were Slightly Mediocre] April 7, 2026: The ferrochrome and chrome ore market saw limited fluctuations...

[SMM Cast Aluminum Alloy Morning Comment: Weak Demand, ADC12 Spot Continued to Weaken] Spot side, the ADC12 market continued in the doldrums yesterday. Affected by aluminum prices being in the doldrums and poor demand-side performance, market sentiment turned cautious. Most market participants slightly lowered their quotes, while a few enterprises held prices steady and took a wait-and-see approach. Currently, low-priced resources increased, the transaction center shifted downward, and prices showed a passive pullback pattern. In the short term, against the backdrop of marginally weakening cost support and limited demand improvement, ADC12 prices are expected to remain in the doldrums.

As of now, the FOB price of Indonesian MHP nickel was $15,341/mt Ni, and the FOB price of Indonesian MHP cobalt was $51,425/mt Co. MHP payables (against SMM battery-grade nickel sulphate index) stood at 86-87, and the MHP cobalt element payable indicator (against SMM refined cobalt (Rotterdam warehouse)) was 94. The FOB price of Indonesian high-grade nickel matte was $15,623/mt Ni.

April 7, 2026: The average warrant price fell $2/mt from the previous trading day, closed at $63/mt (price range $58-68/mt); the average B/L price was flat from the previous trading day, closed at $61/mt (price range $56-66/mt); the average EQ copper (CIF B/L) price fell $1/mt from the previous trading day, closed at $33/mt (price range $26-40/mt), with quotes referencing cargoes arriving from mid-April to early May. During the day, B/L offers remained high, but buyers showed weak acceptance. The trading range was largely in line with last Thursday, but trading volume was low. A small volume of ER copper B/L arriving in mid-April was heard offered at $70/mt, QP May; EQ B/L arriving in mid-April was offered at $40/mt, EQ B/L arriving in mid-to-late April was offered at $40/mt, B/L arriving in mid-May was offered at $55/mt, with a small volume traded at $28-33/mt, QP May. General ER copper warrants for delivery within this week were offered at $60/mt, QP May.

Since the outbreak of the US-Iran war on February 28, 2026, financial and commodity markets have experienced a severe correction and roller-coaster ride.

[SMM Cast Aluminum Alloy Morning Comment: Weaker Aluminum Prices Weigh on the Market, ADC12 Remains in the Doldrums] Spot side, the ADC12 market continued to fluctuate downward. Affected by the widening decline in aluminum prices, market sentiment turned cautious, and most enterprises lowered their quotations; a few enterprises temporarily held prices steady and stayed on the sidelines with support from costs. As the Qingming Festival holiday approaches, downstream stockpiling demand fell short of expectations, with procurement still mainly driven by rigid demand, and transaction performance showed no obvious improvement. Coupled with market expectations of weakening demand in April, ADC12 prices are still facing some downward pressure in the short term, and the market remains in the doldrums.