[Hyundai Motor Steps Up Its EV Push in China Amid US Tariff Pressure] South Korea’s Hyundai Motor is intensifying its EV strategy in China, setting an aggressive target of selling more than 40,000 NEVs this year in a bid to reduce its reliance on the US market as US tariff pressure continues to mount. According to industry sources, Hyundai Motor plans to raise NEV production at its joint venture Beijing Hyundai to 41,500 units in 2026, up more than 33-fold YoY; by then, the share of new energy car models in total production will surge from just 0.6% last year to about 20%. Hyundai Motor has also set its total sales target in China for this year, including exports, at 218,000 units, up 10.8% from 2025.

The global aluminum market is currently characterized by a distinct divergence between overseas and domestic markets. Overseas markets have performed strongly amid supply-side disruptions, while the domestic market has also strengthened due to similar supply disturbances but remained relatively weak compared with the LME. Details on supply, demand, trade and market structure are as follows: I. Overseas Aluminum Market: Prominent Supply Tightness and Sustained Pressure on Inventories The core contradiction in overseas aluminum markets lies in supply contraction and low inventory levels, exacerbated by geopolitical conflicts, further intensifying supply tightness. In terms of LME inventory data, current inventories remain on a continuous downward trend, greatly weakening their supportive role in the market. Historically and recently, LME cancelled warrants peaked at 178,000 tonnes earlier, accounting for 39% of total inventory. As a result, the effectively available LME inventory has dropped to its lowest level since May 2025, further highlighting tight overseas supply. Supply contraction has widened the market deficit, with production cuts at two key projects—EGA and Alba—having a particularly significant impact.On March 28, EGA’s Al Taweelah smelter in the UAE and Alba’s plant in Bahrain were attacked, causing equipment damage and sharply raising risks of capacity disruptions. This came on top of earlier disruptions: March 15: Alba reduced output at three production lines due to shipping disruptions in the Strait of Hormuz; March 12: Qatar’s Qatalum smelter suspended 40% of capacity due to natural gas supply cuts. Overseas primary aluminum supply deficits are expected to continue widening. Meanwhile, high energy costs in Europe have also reduced local semi-fabricated aluminum output, further tightening supply. Supply tightness has directly driven a sharp rise in overseas spot premiums. Amid supply concerns from escalating Middle East geopolitical conflicts, the Q2 MJP premium rose by approximately USD 156.5/t to USD 351.5/t. Specifically, major regional premiums rose markedly at end-March: CIF South Korea: from USD 168/t (early March) to USD 292/t; CIF Thailand: from USD 183/t to USD 317/t; European Duty Unpaid: from USD 345/t to USD 400/t; US Midwest DDP: from 103.75 cents/lb to 105.5 cents/lb. This fully reflects that expectations of tight primary aluminum supply have enabled sellers to push up quotations. Downstream demand and purchasing patterns vary significantly across regions: South Korea: Phase-wise restocking completed; weak downstream restocking sentiment, limited demand support. Southeast Asia: Dominated by term contract execution with limited spot restocking; insufficient incremental buying momentum. Europe: Rising supply shortage concerns amid production cuts in Qatar and Bahrain; downstream restocking underway, relatively strong demand. United States: Low inventories entering a restocking cycle, providing moderate market support. II. Domestic Aluminum Market: High Inventory Pressure, Weak and Constrained Demand In contrast to strong overseas markets, the domestic aluminum market has strengthened amid supply disruptions but underperformed relative to the LME, characterized by high inventories and constrained demand. High domestic aluminum prices have continued to suppress downstream purchasing. Current buying is mainly order-based rigid demand, with low willingness for active restocking, providing limited upward support. Domestic inventory pressure has not eased effectively: primary aluminum inventories remain elevated, and inventory destocking has progressed slower than expected, likely prolonging the digestion period.High inventories and high prices form dual constraints. Although the domestic market has upward momentum, it is weaker than overseas. Domestic spot premiums are expected to remain under pressure and further widen in the short term.

The current global aluminum market showed a clear divergence between markets outside and inside China. LME remained strong amid supply-side disruptions, while the Chinese market also strengthened under supply disruptions, though its overall performance was still relatively weaker than LME. Details on supply and demand, trade flows, and market structure are as follows: I. Overseas Aluminum Market: Tight Supply Became More Pronounced, Inventory Remained Under Pressure The core issue in the overseas aluminum market centered on supply contraction and low inventory, compounded by disruptions from geopolitical conflicts, with the tight supply pattern continuing to intensify. Based on LME inventory data, current inventory remained on a sustained downward trend, and the support provided by inventory to the market weakened significantly. Historical and recent data showed that LME cancelled warrants previously peaked at 178,000 mt, accounting for as much as 39 of total inventory. As a result, LME's actually available effective inventory fell to the lowest level since May 2025, further highlighting the tight supply situation outside China. The contraction on the supply side further amplified the deficit in markets outside China, with the impact of production cuts at the two key projects, EGA and Alba, being particularly prominent. On March 28, EGA's Al Taweelah production site in the UAE and Alba's plant in Bahrain were both attacked, and equipment damage sharply increased the risk of capacity disruptions. In addition, Alba had already started production cuts on three lines on March 15 due to shipping disruptions in the Strait of Hormuz, while Qatar's Qatalum aluminum smelter shut 40 of its capacity on March 12 due to a natural gas supply interruption. Against this backdrop, the supply gap in overseas aluminum ingot is expected to continue widening. Meanwhile, high energy costs in Europe also led to production cuts and volume reductions in local fabricated products, further exacerbating supply tightness. Tight supply directly pushed premiums in overseas spot markets sharply higher. Affected by supply concerns triggered by the escalation of geopolitical conflict in the Middle East, the Q2 MJP price rose by about $156.5/mt to $351.5/mt. Specifically, by month-end, premiums in major regions all showed a significant upward trend: CIF South Korea premiums rose from $168/mt at the beginning of the month to $292/mt; CIF Thailand premiums rose from $183/mt to $317/mt; Europe duty-unpaid premiums rose from $345/mt to $400/mt; and US Midwest DDP premiums rose from 103.75¢/lb at the beginning of the month to 105.5¢/lb, fully reflecting that current expectations of tight overseas aluminum ingot supply pushed sellers to raise offers. From the perspective of downstream demand and procurement pace across overseas regions, clear divergence was evident: South Korea: phased restocking had already been completed earlier, and downstream purchase and restocking sentiment was currently weak, with demand providing limited support to the market; Southeast Asia: the market was currently focused on digesting inventories, with only partial spot order restocking demand, and overall momentum for new purchases was insufficient; Europe: affected by production cuts in Qatar and Bahrain's aluminum industries, market concerns over a supply deficit continued to intensify, and downstream players were gradually carrying out restocking purchases, with demand showing relatively strong performance; US: inventory was currently at a low level and was entering a restocking cycle, providing some support to the market. II. China’s Aluminum Market: Under Pressure from Inventory at High Levels, with Suppressed and Weak Demand In contrast to the strength of the LME, although China’s aluminum market was likewise supported by supply disruptions and showed an upward trend, its overall performance remained relatively weaker than the LME, with the core pattern characterized by “elevated inventory and suppressed demand.” On the price front, persistently high aluminum prices in China continued to restrain downstream purchasing demand. At present, the downstream procurement pace is mainly driven by order-based just-in-time procurement, while willingness to restock proactively remains subdued, making it difficult to form stronger demand support. China has not effectively eased inventory pressure—domestic aluminum ingot remains at inventory at high levels, and the pace of inventory drawdown was slower than expectations. Inventory drawdown is expected to take even longer going forward. Inventory at high levels and high aluminum prices have formed a dual constraint, leaving the Chinese market with upward momentum, but weaker than that of the LME. In the short term, spot premiums in China are expected to remain under pressure and widen further. Source: SMM

In Q1 2026, China’s aluminum semis exports showed a pronounced pattern of product-category divergence amid the interplay of three factors: the long-term impact of the cancellation of export tax rebates in December 2024, the divergence in demand structures outside China, and the sudden outbreak of geopolitical conflict in the Strait of Hormuz.....

Korea’s battery industry is expanding beyond EVs into ESS and other applications. As a result, competition is shifting from product performance toward broader supply chain capabilities. InterBattery 2026 highlighted this transition.

While maintaining a growth structure centered on EVs, South Korea’s battery industry is accelerating its expansion into energy storage systems (ESS) and non-automotive application fields, entering a new phase of transformation. As a result, the basis of competition is shifting from product performance to broader supply chain capabilities. At InterBattery 2026 held in March, major South Korean battery producers showcased a diverse range of products for ESS, AI infrastructure, and industrial applications, underscoring this shift. The industry’s focus is now moving from the single EV market to a broader landscape of energy and industrial applications.

With utilization rates among Korean battery manufacturers remaining around 50% and reflecting a timing mismatch between demand and supply, utilization is increasingly emerging as a key indicator of cost structure and operational efficiency in a context where capacity expansion has preceded demand realization.

The International Finance Corporation ('IFC') is providing a loan of up to $125 million to 'OCI TerraSus Sdn. Bhd.' for a semiconductor-grade polysilicon manufacturing facility in Malaysia. The plant, a joint venture between Korea's 'OCI' and Japan's 'Tokuyama Corporation', is located in Sarawak and has a planned capacity of 10,000 MT with a total investment of $435 million. Powered by renewable energy, it is billed as Southeast Asia's first such facility, producing high-purity materials for silicon wafers and semiconductor chips amid surging 'AI' demand. This follows a $250 million 'IFC' loan granted last August for a 100,000 MT polysilicon plant in Oman.

Import side, cumulative refined lead imports in January-February reached 33,412 mt, surging 732.08% YoY. Of this, February imports alone were 21,072 mt, up 70.77% MoM and 1,169.62% YoY, hitting a new high for the same period in recent years; raw material supply remained ample.

India’s steel market in 2026 is expected to remain balanced, with demand slightly outpacing supply. Domestic consumption will absorb most output, while imports decline overall and exports increase modestly as a balancing mechanism. Supported by strong growth and infrastructure investment, India is transitioning toward a demand-led steel market with solid long-term potential.