Futures: Overnight, LME lead opened at $1,895.5/mt. After the opening, prices quickly fell to $1,885.5/mt, then fluctuate rangebound within the $1,888–1,896.5/mt range, with a balanced tug-of-war between longs and shorts and cautious market sentiment. After 0:00, prices rose further, breaking above the previous trading range and touching a high of $1,901/mt, before finally closing at $1,898.5/mt. A small bullish candlestick was recorded, up $0/mt, or 0.0%. Overnight, the most-traded SHFE lead 2605 contract opened at a low of 16,420 yuan/mt. In early trading, SHFE lead prices rose rapidly, then saw wide swings within the 16,440–16,481 yuan/mt range, with an evident tug-of-war between longs and shorts. Intraday volatility narrowed, and prices gradually stabilized around 16,455–16,465 yuan/mt, while trading volume pulled back simultaneously and market sentiment turned cautious. Late in the session, SHFE lead broke upward again, touching a high of 16,500 yuan/mt, then quickly pulled back to finally close at 16,470 yuan/mt. A small bullish candlestick was recorded, up 50 yuan/mt, or 0.3%. On the macro front: 1. Poll: Trump’s approval rating fell to its lowest level since returning to the White House. 2. US media: The US Department of Justice admitted it lacked evidence in its investigation into Powell. 3. Turkey considered using its $135 billion gold reserves to defend the lira. 4. Israeli media: The US intended to seek a one-month ceasefire to discuss a 15-point agreement with Iran. 5. Goldman Sachs maintained its overweight recommendation on Chinese equities (A-shares and Hong Kong stocks). Spot fundamentals: SHFE lead remained in the doldrums, while suppliers held prices firm on shipments. Quotations in Jiangsu, Zhejiang, Shanghai were raised slightly in spot premiums, while quotations for cargoes self-picked up from production site at primary lead plants changed little. Mainstream producing areas quoted premiums of 0-50 yuan/mt against the SMM #1 lead price, with a few quoting premiums of 100 yuan/mt ex-works. On the secondary lead side, some secondary lead enterprises had maintenance plans, and circulating cargoes in the spot market were limited. Secondary refined lead was quoted at premiums of 0-75 yuan/mt against the SMM #1 lead average price, ex-works. Downstream enterprises maintained purchasing as needed, but some engaged in more bargaining. In addition, as secondary lead prices inverted against primary lead, spot order purchases tilted toward primary lead. Inventory: As of March 24, LME lead inventory fell by 725 mt, or 0.26%, to 283,350 mt. As of March 23, SMM social inventory of lead ingot across five regions pulled back somewhat from previous inventory at high levels. Today’s Lead Price Forecast: Supply side, primary lead smelters held firm offers, and spot premiums in Jiangsu, Zhejiang, Shanghai were raised slightly, while quotations for cargoes self-picked up from production site at primary lead smelters changed little. Some secondary lead smelters had maintenance plans, and circulating cargoes in the spot market were limited. Demand side, downstream enterprises maintained purchasing as needed, but some engaged in more bargaining, and as secondary lead prices inverted against primary lead, spot order procurement tilted toward primary lead. According to SMM analysis, SHFE lead prices were likely to remain in the doldrums in the short term.

[SMM Morning Zinc Briefing: Stronger US Dollar Index Put LME Zinc Under Pressure and Slightly Lower]: Overnight, LME zinc opened at $3,095/mt. After the opening, LME zinc fluctuated downward along the daily average line, hitting an intraday high of $3,097/mt. Near the close, LME zinc fell to a low of $3,027/mt, and finally closed down at $3,038.5/mt, down $64.5/mt, a decline of 2.08%, while trading volume decreased to 11,298 lots...

Gold is doing the opposite of what it should. The metal is falling for a reason most investors did not see coming. Wall Street's biggest banks have not changed their outlook. Here is why that matters.

SMM News: Following our previous analysis of the transportation and wind power sectors, this installment shifts focus to the critical demand drivers in the consumer and construction domains: White Goods , Consumer Electronics , and Real Estate-related applications (Elevators and Power Tools). While these sectors individually consume less magnetic material per unit compared to New Energy Vehicles (NEVs), their sheer aggregate volume makes them indispensable pillars of the Neodymium-Praseodymium (Pr-Nd) market. However, data from early 2026 reveals a troubling trend of stagnation and structural contraction across these traditional strongholds. I. White Goods: The Dual Pressure of Production Slumps and Material Substitution In the white goods sector, Neodymium-Iron-Boron (NdFeB) magnets are primarily utilized in two key applications: compressors for inverter air conditioners and motors for drum and impeller washing machines . 1. Air Conditioners: A Sharp Contraction in Output and Dosage According to data from the National Bureau of Statistics (NBS), China’s cumulative air conditioner production for January-February 2026 stood at 40.118 million units , a staggering 35% year-on-year (YoY) decline compared to the 61.921 million units produced in the same period of 2025. (Reason: This drastic drop is attributed to a combination of factors: firstly, an unusually mild winter across major consumption regions significantly dampened heating demand, leading to a destocking cycle among distributors. Secondly, the real estate sector’s continued downturn has severely curtailed new housing completions, directly reducing the installation of centralized and split AC systems. Lastly, high inventory levels carried over from 2025 forced manufacturers to aggressively cut production schedules in Q1 2026 to avoid capital lock-up.) Looking at the full year, SMM forecasts a marginal growth of 0.96% for 2026, with total annual production projected at 271.095 million units . (Reason: The near-flat growth outlook reflects a mature market saturation where replacement demand, rather than new installations, drives volume. While export markets offer some resilience against domestic weakness, rising trade barriers and logistical costs in key regions like Europe and North America are expected to cap significant expansion.) Applying SMM’s calculation model: Inverter Penetration: 99% NdFeB Motor Penetration: 92% Specific Consumption: Assumed at 100g/unit for 2026. Based on these parameters, the total NdFeB consumption for the air conditioner sector in 2026 is estimated at 24,691 tons , representing a 23% decrease from the 29,163 tons consumed in 2025. The core driver of this decline is twofold: first, the persistently high prices of Pr-Nd since the second half of 2025 have accelerated the industry’s cost-reduction initiatives. Second, there is a clear technological shift towards minimizing rare earth usage. The average single-unit dosage has dropped from 120g/unit in 2025 to 100g/unit in 2026 , as manufacturers optimize motor designs and, in some lower-end models, substitute with ferrite magnets or induction motor technologies where efficiency standards allow. 2. Washing Machines: A Slow Erosion of Demand For January-February 2026, China’s cumulative washing machine production was 18.58 million units , a slight 0.3% YoY decline from the 18.51 million units in the same period of 2025. (Reason: The stability in production volumes masks underlying weakness. The slight dip is primarily due to weak consumer confidence impacting discretionary spending on home appliance upgrades. Furthermore, the export market for washing machines has faced headwinds from sluggish global economic growth and intensified competition from Southeast Asian manufacturing hubs, offsetting modest domestic recovery efforts.) SMM projects a full-year growth rate of 3.1% for 2026. (Reason: This modest recovery is underpinned by government-led "trade-in" subsidy policies aimed at boosting domestic consumption of energy-efficient appliances. Additionally, product innovation in the high-end segment, such as washer-dryer combos and smart features, is expected to stimulate some replacement demand, though the overall ceiling remains low.) Demand Calculation Logic: Drum Washer Penetration: 63% (High-end, 98% use NdFeB) Impeller Washer Penetration: 28% (Mid-range, 50% use NdFeB) Specific Consumption: 290g/unit for drum washers; 240g/unit for impeller washers. Under this model, the total NdFeB demand for washing machines in 2026 is estimated at 27,204.52 tons , a 0.2% decrease from 27,262 tons in 2025. The sector is experiencing a slow but steady erosion of demand. While high-end drum washers rely heavily on efficient NdFeB motors to meet stringent energy labels, the volatility of rare earth prices is prompting manufacturers to cautiously explore alternative motor designs or reduce magnet grades in non-critical applications. Consequently, the industry has adopted a strategy of gradual reduction rather than abrupt substitution, balancing performance requirements with cost control. Outlook: The trajectory for white goods in 2026 is undeniably pessimistic. Both production volumes and technical intensity (dosage per unit) are trending downward, creating a double drag on Pr-Nd demand. II. Consumer Electronics: Volume Resilience vs. Intensity Decline The consumer electronics sector, modeled by SMM, comprises four main segments: Mobile Phones , Tablets , Desktops/Laptops , and Smartwatches . These devices utilize NdFeB primarily for acoustic components (speakers/receivers) and haptic feedback motors, with emerging uses in magnetic charging interfaces. The specific consumption is generally low, ranging from 2-5g/unit , except for desktops which average 15g/unit . Market Performance (Jan-Feb 2026): Mobile Phones: 220 million units (+6.8% YoY). Micro-computer Equipment: 41.956 million units (-31% YoY). Breakdown: 21% Tablets, 27% Desktops, 52% Laptops. Smartwatches: 8.196 million units (+7.8% YoY). (Reason: The divergence in performance is stark. Mobile phone growth is driven by the global rollout of AI-enabled handsets and the replacement cycle for 5G devices, particularly in emerging markets. Conversely, the sharp collapse in micro-computer equipment reflects the post-pandemic normalization of demand; the massive stockpiling of devices during 2020-2022 has led to a prolonged digestion phase. Additionally, extended device lifespans due to improved hardware durability have further suppressed replacement rates for PCs and tablets.) 2026 Full-Year Forecast: SMM anticipates a 1% growth for mobile phones and micro-computers combined, and a 5% growth for smartwatches. (Reason: The muted outlook for computing devices stems from persistent macroeconomic uncertainty and corporate IT budget tightening. For smartwatches, growth is fueled by increasing health-monitoring capabilities and deeper ecosystem integration with smartphones. However, the entire sector faces a cloud of uncertainty due to escalating geopolitical tensions affecting supply chains and rising memory chip prices, which may force OEMs to revise production targets downward later in the year.) Demand Estimation: Mobile Phones: 3,109.8 tons Micro-computers: 2,018.9 tons Smartwatches: 125.06 tons Total 2026 Demand: 5,253.76 tons , a 3% decline from 5,421.19 tons in 2025. The primary driver for this decline is the continuous, albeit slow, reduction in specific consumption. As miniaturization advances and alternative magnetic materials improve, the amount of NdFeB required per device is shrinking. Despite the relatively low single-unit dosage, the massive scale of the consumer electronics industry ensures it remains a significant consumer of NdFeB. Moreover, this sector is characterized by highly standardized supply chains, where major OEMs maintain binding agreements with certified magnet suppliers, making demand relatively stable but resistant to price-driven spikes. III. Real Estate Related: Elevators and Power Tools The final segment covers industries tightly coupled with the real estate cycle: Elevators and Handheld Power Tools . 1. Elevators: Policy Support vs. Structural Headwinds In January-February 2026, elevator production reached 150,000 units , a 7.1% YoY increase . (Reason: This short-term surge is largely attributable to the acceleration of projects that were delayed in late 2025, as developers rushed to meet pre-delivery deadlines before stricter regulatory inspections took effect. Additionally, government mandates for retrofitting old residential communities with elevators in urban renewal zones provided a temporary boost to order books.) However, SMM forecasts a full-year contraction of -3% for 2026. (Reason: The long-term outlook is grim due to the fundamental slowdown in new residential construction starts, which remain at multi-year lows. The debt crisis plaguing major property developers continues to stall new project launches, directly impacting the demand for new elevator installations. While the retrofit market offers some support, it is insufficient to offset the collapse in new building commissions.) Calculation: Energy-saving Elevator Penetration: 90% Specific Consumption: 6 kg/unit (for energy-saving models). Total 2026 Demand: 7,222.6 tons , a 1.3% increase from 7,125.3 tons in 2025. (Reason for Growth: The slight increase in total tonnage despite falling production volumes is entirely driven by the rising penetration of energy-saving elevators. Stricter national energy efficiency standards (GB standards) are forcing manufacturers to adopt permanent magnet synchronous motors (PMSM) over traditional asynchronous motors, thereby increasing the average NdFeB dosage per unit even as the total number of units declines.) 2. Handheld Power Tools: A Direct Casualty of Property Slump Production of handheld power tools in Jan-Feb 2026 was 29.566 million units , down 0.24% YoY . SMM projects a -3% decline for the full year 2026. (Reason: The downturn is inextricably linked to the stagnation in the global and domestic real estate markets. Reduced renovation activities and a slowdown in infrastructure projects have dampened demand for professional-grade tools. Furthermore, high inventory levels in distribution channels across North America and Europe, resulting from over-ordering in 2024, have led to a prolonged period of destocking.) Definition & Scope: According to the National Bureau of Statistics, handheld electric tools refer to portable motor-driven tools operated by hand, including electric drills, grinders, sanders, saws, and screwdrivers . These products are highly sensitive to housing turnover and renovation rates. Demand Calculation: NdFeB Penetration: 60% Specific Consumption: 80g/unit Total 2026 Demand: 9,134 tons , a sharp 13.4% drop from 10,548 tons in 2025. The significant contraction in this sector underscores the deep correlation between the property market and industrial metal demand. As the real estate sector remains in a prolonged adjustment phase, the downstream demand for power tools—and consequently NdFeB—faces sustained pressure. Conclusion The analysis of white goods, consumer electronics, and real estate-related sectors paints a picture of structural weakness for 2026. While niche policy drivers (like energy-saving elevator mandates) provide isolated pockets of growth, the overarching trends are defined by production saturation, inventory destocking, and aggressive material substitution . The combined effect of lower production volumes and reduced single-unit dosages creates a formidable headwind for Pr-Nd prices. In the final installment of this series, we will pivot to the future: examining the burgeoning demand from Low-Altitude Economy (eVTOLs), Robotics (Industrial and Service), and the relentless expansion of Electric Two-Wheelers . These emerging sectors may hold the key to offsetting the declines observed in traditional industries and reshaping the long-term demand curve for rare earth magnets.

At the start of the year, there was plenty of excitement around silver. The precious metal was soaring and reaching record highs along the way. However, it has declined from the highs it reached in January.

Solid-state batteries were a hot topic at the 2026 Two Sessions, where delegates noted that the industry is at a critical inflection point, moving from “samples” to “products.”

Gold prices fall due to interest rate gloom and Middle East tensions. US Fed and major central banks likely to maintain current interest rates. Long-term gold outlook positive, seen as a hedge against risks.

This week (March 13, 2026–March 19, 2026), multiple enterprises in the solid-state battery sector were active: Dali Times commenced construction of a 2 GWh specialized semi-solid-state battery base; EVE’s Longquan Phase III/IV all-solid-state batteries rolled off the line in Chengdu; Chery released its 600 Wh/kg Rhino all-solid-state battery technology。

March 13 (Reuters) - Gold was on track for a second straight weekly loss, even as it edged higher on Friday, as surging oil prices dampened rate cut bets and caused investors to cover margin calls, while a rising dollar and U.S. yields also pressured prices.

[SMM Analysis] Freight Rates Surge, Making Deals Difficult for Steel Expor ters Affected by the US-Iran conflict, tight energy supply and sharply higher fuel costs, compounded by exchange rate fluctuations, have continuously pushed up China's export offers in recent days. Compared with the beginning of the month (March 6), SMM HRC prices have been raised by $9/mt; galvanizing prices rose by $11/mt; CRC rose by $5/mt; billet rose by $6/mt; and rebar rose by $6/mt. However, looking back at market transaction performance, deals weakened again recently. According to the SMM survey, ocean freight rates surged sharply, with current freight to the Middle East as high as $50-60. Most outside China clients remained on the sidelines; shipowners also refused to commit tonnage while waiting for the market to stabilize. For China exporters, there were offers but no market, making shipments difficult. Meanwhile, market sources said Hadeed, the GCC's only flat steel producer, raised its May hot-rolled coil (HRC) prices, still related to shipping restrictions in the Strait of Hormuz. HRC cargoes previously booked from China and other origins were also being redirected to the west coast, mainly heading to Jeddah Port, bringing high inland transportation costs. As for global steel prices, in India, in addition to rising raw material costs and rupee depreciation, a sudden LNG energy shortage further pushed up production costs, forcing steel mills to maintain a strong willingness to hold prices firm despite the traditional domestic off-season and blocked exports. In the Southeast Asian market, price increases were accepted entirely passively, mainly due to the rigid pass-through of high ocean freight rates by overseas suppliers. Although Southeast Asian buyers hesitated to take orders, they had no choice but to passively accept the increases against the backdrop of persistently high geopolitical logistics costs. At the same time, CIS export offers also rose significantly, benefiting from the intensifying geopolitical conflict in the Middle East and the resulting short-term global supply tightens. In the Middle East market, meanwhile, as war tensions continued to escalate, the closure of the Strait of Hormuz completely disrupted transportation, while freight rates and delivery uncertainty pushed the sheets & plates import markets in the UAE and Saudi Arabia into a complete standstill. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.