Gold has lost significant ground in recent weeks, but for Wells Fargo, this apparently changes little in the long-term picture. The US bank has reaffirmed its positive outlook for the precious metal and significantly raised its price target for the current year.

Today, the most-traded BC copper 2605 contract opened at 85,020 yuan/mt. Its center fluctuated upward and, after hitting a high of 84,940 yuan/mt, began to decline. Near the close, it touched a low of 84,260 yuan/mt and finally settled at 84,410 yuan/mt, down 0.09%. Open interest reached 6,279 lots, an increase of 157 lots from the previous trading day, while trading volume came in at 3,298 lots, a decrease of 1,106 lots from the previous trading day. On the macro front, a US Fed governor mentioned that interest rates could be cut gradually by 1 percentage point within a year, while Powell said energy shocks are usually short-lived and patience is warranted. After the remarks, the market priced in only about 3 basis points of rate cuts by year-end. Meanwhile, Iran’s parliament approved the imposition of strait transit fees, US-Iran talks continued, Trump threatened to strike Iran’s energy facilities if the talks collapsed, and Europe said Iran had armed the Houthis in the Red Sea conflict, though internal differences remained. The market was still trading these developments. Fundamentals, supply side, imported cargoes had continued to arrive recently, and overall spot circulation was relatively ample. Demand side, as a new monthly procurement cycle begins, the previously accumulated purchasing demand from downstream enterprises will be gradually released. The SHFE copper 2605 contract closed at 95,340 yuan/mt. Based on the BC copper 2605 contract price of 84,410 yuan/mt, its after-tax price was 95,383 yuan/mt. The price spread between the SHFE copper 2605 contract and BC copper was -43 yuan/mt. The spread remained inverted and narrowed somewhat from the previous day.

For almost four weeks, the war against Iran has kept the world on edge – a conflict that leaves deep marks not only geopolitically but also economically. Volatility and uncertainty in global markets are increasing daily.

SMM Morning Meeting Summary: Overnight, LME copper opened at $12,223/mt. In early trading, it saw wide swings and climbed to $12,278/mt. Subsequently, the center of copper prices moved straight downward to a low of $12,153.5/mt, before fluctuating widely again and finally closing at $12,195/mt, up 0.44. Trading volume reached 15,300 lots, and open interest stood at 295,000 lots, down 454 lots from the previous trading day. Overnight, the most-traded SHFE copper 2605 contract opened at 96,100 yuan/mt and hit a high of 96,240 yuan/mt in early trading. Subsequently, the center of copper prices gradually moved lower to 95,210 yuan/mt, before fluctuating rangebound and finally closing at 95,350 yuan/mt, down 0.05. Trading volume reached 36,500 lots, and open interest stood at 183,000 lots, down 2,394 lots from the previous trading day, mainly due to bulls reducing positions.

The gold price has undergone a sharp correction since its January high, unsettling many investors. The price decline of more than $1,000 per ounce appears at first glance to represent a break in the previous uptrend. However, according to analysts at WisdomTree, this movement reflects less a fundamental change in the macroeconomic situation than a combination of position adjustments, liquidity needs, and short-term market pressure.

Precious metals staged their first coordinated rally in nearly two weeks on Tuesday as the prospect of a diplomatic resolution to the U.S.-Iran conflict continued to lift market sentiment and weaken the dollar.

[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.

SMM, March 24: SHFE aluminum 2604 fluctuated downward in early trading, slightly higher than the previous trading day. Overall market buying sentiment was relatively good, and sellers held prices firm as aluminum prices remained at relatively low levels. Today’s mainstream transaction prices were concentrated at SHFE aluminum 04 contract +10 yuan/mt. Today, the east China market shipments sentiment index was 2.79, up 0.07 MoM; the purchasing sentiment index was 3.34, up 0.04 MoM. As aluminum prices extended their decline, traders in the central China market showed weak purchase sentiment. With the month-end settlement date approaching, suppliers made heavy shipments and showed limited willingness to hold prices firm. Downstream processing enterprises were wary of further price declines, with no expectation of large-scale stockpiling at low prices for now. Overall market purchase activity was sluggish, and prices showed a continued price collapse trend. Ultimately, actual transaction prices in the central China market were concentrated in the range from a premium of 20 yuan over the central China price to a discount of 20 yuan to the central China price. Today, the central China market shipments sentiment index was 2.63, flat MoM; the purchasing sentiment index was 2.4, down 0.08 MoM. Inventory side, aluminum ingot inventory in major consumption areas increased by 6,500 mt MoM today, with destocking mainly coming from Gongyi and Guangdong. In the short term, after the Chinese New Year, aluminum ingot inventory continued to see seasonal inventory buildup. Affected by bullish sentiment, premiums are expected to remain on a narrowing trend.

SMM News: Following our previous analysis of the transportation and wind power sectors, this installment shifts focus to the critical demand drivers in the consumer and construction domains: White Goods , Consumer Electronics , and Real Estate-related applications (Elevators and Power Tools). While these sectors individually consume less magnetic material per unit compared to New Energy Vehicles (NEVs), their sheer aggregate volume makes them indispensable pillars of the Neodymium-Praseodymium (Pr-Nd) market. However, data from early 2026 reveals a troubling trend of stagnation and structural contraction across these traditional strongholds. I. White Goods: The Dual Pressure of Production Slumps and Material Substitution In the white goods sector, Neodymium-Iron-Boron (NdFeB) magnets are primarily utilized in two key applications: compressors for inverter air conditioners and motors for drum and impeller washing machines . 1. Air Conditioners: A Sharp Contraction in Output and Dosage According to data from the National Bureau of Statistics (NBS), China’s cumulative air conditioner production for January-February 2026 stood at 40.118 million units , a staggering 35% year-on-year (YoY) decline compared to the 61.921 million units produced in the same period of 2025. (Reason: This drastic drop is attributed to a combination of factors: firstly, an unusually mild winter across major consumption regions significantly dampened heating demand, leading to a destocking cycle among distributors. Secondly, the real estate sector’s continued downturn has severely curtailed new housing completions, directly reducing the installation of centralized and split AC systems. Lastly, high inventory levels carried over from 2025 forced manufacturers to aggressively cut production schedules in Q1 2026 to avoid capital lock-up.) Looking at the full year, SMM forecasts a marginal growth of 0.96% for 2026, with total annual production projected at 271.095 million units . (Reason: The near-flat growth outlook reflects a mature market saturation where replacement demand, rather than new installations, drives volume. While export markets offer some resilience against domestic weakness, rising trade barriers and logistical costs in key regions like Europe and North America are expected to cap significant expansion.) Applying SMM’s calculation model: Inverter Penetration: 99% NdFeB Motor Penetration: 92% Specific Consumption: Assumed at 100g/unit for 2026. Based on these parameters, the total NdFeB consumption for the air conditioner sector in 2026 is estimated at 24,691 tons , representing a 23% decrease from the 29,163 tons consumed in 2025. The core driver of this decline is twofold: first, the persistently high prices of Pr-Nd since the second half of 2025 have accelerated the industry’s cost-reduction initiatives. Second, there is a clear technological shift towards minimizing rare earth usage. The average single-unit dosage has dropped from 120g/unit in 2025 to 100g/unit in 2026 , as manufacturers optimize motor designs and, in some lower-end models, substitute with ferrite magnets or induction motor technologies where efficiency standards allow. 2. Washing Machines: A Slow Erosion of Demand For January-February 2026, China’s cumulative washing machine production was 18.58 million units , a slight 0.3% YoY decline from the 18.51 million units in the same period of 2025. (Reason: The stability in production volumes masks underlying weakness. The slight dip is primarily due to weak consumer confidence impacting discretionary spending on home appliance upgrades. Furthermore, the export market for washing machines has faced headwinds from sluggish global economic growth and intensified competition from Southeast Asian manufacturing hubs, offsetting modest domestic recovery efforts.) SMM projects a full-year growth rate of 3.1% for 2026. (Reason: This modest recovery is underpinned by government-led "trade-in" subsidy policies aimed at boosting domestic consumption of energy-efficient appliances. Additionally, product innovation in the high-end segment, such as washer-dryer combos and smart features, is expected to stimulate some replacement demand, though the overall ceiling remains low.) Demand Calculation Logic: Drum Washer Penetration: 63% (High-end, 98% use NdFeB) Impeller Washer Penetration: 28% (Mid-range, 50% use NdFeB) Specific Consumption: 290g/unit for drum washers; 240g/unit for impeller washers. Under this model, the total NdFeB demand for washing machines in 2026 is estimated at 27,204.52 tons , a 0.2% decrease from 27,262 tons in 2025. The sector is experiencing a slow but steady erosion of demand. While high-end drum washers rely heavily on efficient NdFeB motors to meet stringent energy labels, the volatility of rare earth prices is prompting manufacturers to cautiously explore alternative motor designs or reduce magnet grades in non-critical applications. Consequently, the industry has adopted a strategy of gradual reduction rather than abrupt substitution, balancing performance requirements with cost control. Outlook: The trajectory for white goods in 2026 is undeniably pessimistic. Both production volumes and technical intensity (dosage per unit) are trending downward, creating a double drag on Pr-Nd demand. II. Consumer Electronics: Volume Resilience vs. Intensity Decline The consumer electronics sector, modeled by SMM, comprises four main segments: Mobile Phones , Tablets , Desktops/Laptops , and Smartwatches . These devices utilize NdFeB primarily for acoustic components (speakers/receivers) and haptic feedback motors, with emerging uses in magnetic charging interfaces. The specific consumption is generally low, ranging from 2-5g/unit , except for desktops which average 15g/unit . Market Performance (Jan-Feb 2026): Mobile Phones: 220 million units (+6.8% YoY). Micro-computer Equipment: 41.956 million units (-31% YoY). Breakdown: 21% Tablets, 27% Desktops, 52% Laptops. Smartwatches: 8.196 million units (+7.8% YoY). (Reason: The divergence in performance is stark. Mobile phone growth is driven by the global rollout of AI-enabled handsets and the replacement cycle for 5G devices, particularly in emerging markets. Conversely, the sharp collapse in micro-computer equipment reflects the post-pandemic normalization of demand; the massive stockpiling of devices during 2020-2022 has led to a prolonged digestion phase. Additionally, extended device lifespans due to improved hardware durability have further suppressed replacement rates for PCs and tablets.) 2026 Full-Year Forecast: SMM anticipates a 1% growth for mobile phones and micro-computers combined, and a 5% growth for smartwatches. (Reason: The muted outlook for computing devices stems from persistent macroeconomic uncertainty and corporate IT budget tightening. For smartwatches, growth is fueled by increasing health-monitoring capabilities and deeper ecosystem integration with smartphones. However, the entire sector faces a cloud of uncertainty due to escalating geopolitical tensions affecting supply chains and rising memory chip prices, which may force OEMs to revise production targets downward later in the year.) Demand Estimation: Mobile Phones: 3,109.8 tons Micro-computers: 2,018.9 tons Smartwatches: 125.06 tons Total 2026 Demand: 5,253.76 tons , a 3% decline from 5,421.19 tons in 2025. The primary driver for this decline is the continuous, albeit slow, reduction in specific consumption. As miniaturization advances and alternative magnetic materials improve, the amount of NdFeB required per device is shrinking. Despite the relatively low single-unit dosage, the massive scale of the consumer electronics industry ensures it remains a significant consumer of NdFeB. Moreover, this sector is characterized by highly standardized supply chains, where major OEMs maintain binding agreements with certified magnet suppliers, making demand relatively stable but resistant to price-driven spikes. III. Real Estate Related: Elevators and Power Tools The final segment covers industries tightly coupled with the real estate cycle: Elevators and Handheld Power Tools . 1. Elevators: Policy Support vs. Structural Headwinds In January-February 2026, elevator production reached 150,000 units , a 7.1% YoY increase . (Reason: This short-term surge is largely attributable to the acceleration of projects that were delayed in late 2025, as developers rushed to meet pre-delivery deadlines before stricter regulatory inspections took effect. Additionally, government mandates for retrofitting old residential communities with elevators in urban renewal zones provided a temporary boost to order books.) However, SMM forecasts a full-year contraction of -3% for 2026. (Reason: The long-term outlook is grim due to the fundamental slowdown in new residential construction starts, which remain at multi-year lows. The debt crisis plaguing major property developers continues to stall new project launches, directly impacting the demand for new elevator installations. While the retrofit market offers some support, it is insufficient to offset the collapse in new building commissions.) Calculation: Energy-saving Elevator Penetration: 90% Specific Consumption: 6 kg/unit (for energy-saving models). Total 2026 Demand: 7,222.6 tons , a 1.3% increase from 7,125.3 tons in 2025. (Reason for Growth: The slight increase in total tonnage despite falling production volumes is entirely driven by the rising penetration of energy-saving elevators. Stricter national energy efficiency standards (GB standards) are forcing manufacturers to adopt permanent magnet synchronous motors (PMSM) over traditional asynchronous motors, thereby increasing the average NdFeB dosage per unit even as the total number of units declines.) 2. Handheld Power Tools: A Direct Casualty of Property Slump Production of handheld power tools in Jan-Feb 2026 was 29.566 million units , down 0.24% YoY . SMM projects a -3% decline for the full year 2026. (Reason: The downturn is inextricably linked to the stagnation in the global and domestic real estate markets. Reduced renovation activities and a slowdown in infrastructure projects have dampened demand for professional-grade tools. Furthermore, high inventory levels in distribution channels across North America and Europe, resulting from over-ordering in 2024, have led to a prolonged period of destocking.) Definition & Scope: According to the National Bureau of Statistics, handheld electric tools refer to portable motor-driven tools operated by hand, including electric drills, grinders, sanders, saws, and screwdrivers . These products are highly sensitive to housing turnover and renovation rates. Demand Calculation: NdFeB Penetration: 60% Specific Consumption: 80g/unit Total 2026 Demand: 9,134 tons , a sharp 13.4% drop from 10,548 tons in 2025. The significant contraction in this sector underscores the deep correlation between the property market and industrial metal demand. As the real estate sector remains in a prolonged adjustment phase, the downstream demand for power tools—and consequently NdFeB—faces sustained pressure. Conclusion The analysis of white goods, consumer electronics, and real estate-related sectors paints a picture of structural weakness for 2026. While niche policy drivers (like energy-saving elevator mandates) provide isolated pockets of growth, the overarching trends are defined by production saturation, inventory destocking, and aggressive material substitution . The combined effect of lower production volumes and reduced single-unit dosages creates a formidable headwind for Pr-Nd prices. In the final installment of this series, we will pivot to the future: examining the burgeoning demand from Low-Altitude Economy (eVTOLs), Robotics (Industrial and Service), and the relentless expansion of Electric Two-Wheelers . These emerging sectors may hold the key to offsetting the declines observed in traditional industries and reshaping the long-term demand curve for rare earth magnets.

[SMM Tungsten Daily Review: Slight Price Collapse in the Scrap Tungsten Market, Ore and Upstream Smelting Products Consolidated Sideways] SMM News, March 23 In the short term, prices across the tungsten industry chain still showed divergence between primary and recycled materials. China was currently in a transition period marked by tightening supply on the raw ore side and a rising utilization rate of recycled materials. Smelters still needed some time to adjust their restocking practices and complete the adaptation and transition from a long-term contract pricing model led by the ore side to a scrap tungsten market procurement model featuring higher-frequency transactions and greater sensitivity to sentiment.