On Tuesday, Eastern Time, Chicago Fed President Goolsbee warned that the energy shock stemming from the Middle East conflict is threatening the US Fed’s dual mandate, complicating its monetary policy outlook and potentially delaying interest rate cuts—echoing earlier remarks by Fed Governor Barr that inflation risks and oil prices support keeping rates unchanged for longer. Specifically, the energy price shock poses risks to both sides of the US Fed’s dual mandate, making the trade-off between controlling inflation and supporting economic growth more complex. “The new shock has undoubtedly disrupted the US Fed’s plans... and inflation was already uncomfortably high even before the shock occurred,” Goolsbee said bluntly. Goolsbee noted that central bank policymakers around the world lack clear historical experience to draw on in dealing with the current mix of geopolitical risks and inflationary pressures, and therefore “this is a bad situation for central banks.” Goolsbee stressed that the current path of interest rates at central banks around the world still depends heavily on how the conflict evolves, especially its impact on energy markets. As for the US Fed, he said he is not yet able to judge whether it will be able to cut interest rates again, because that outlook depends on the duration of the conflict and the extent to which rising oil prices affect overall inflation. “Only if inflation shows improvement can one realistically expect rates to fall this year,” he added, further reinforcing the US Fed’s data-dependent stance. The US Fed’s Internal Stance Is Turning More Cautious These remarks by Goolsbee were highly consistent with earlier comments by Fed Governor Michael Barr. Barr had previously also emphasized that, given that US inflation remains above target and elevated oil prices are further pushing up inflation, interest rates may need to remain unchanged “for some time.” In addition, Barr likewise pointed out that although the US labour market appears to be stabilizing, US Fed officials need to see clear evidence of sustained disinflation before considering interest rate cuts. Taken together, these comments highlight the US Fed’s increasingly cautious shift in stance. As geopolitical developments exert a growing influence on the US inflation outlook, the combination of persistent price pressures and external shocks has reinforced expectations that high inflation will last longer, while also creating uncertainty over the feasibility of further policy easing in the near term. For markets, the key point is that after the Russia-Ukraine shock several years ago, energy-driven inflation risks have now been firmly incorporated into the US Fed’s reaction function. As a result, US Fed rate expectations may remain sensitive not only to economic data, but also to developments in the Middle East conflict and their impact on oil prices.

SMM Morning Meeting Summary: Overnight, LME copper opened at $12,016.5/mt. After dipping to $11,955.5/mt in early trading, its center rose sharply to a high of $12,160/mt, and then continued to hover at highs, finally closing at $12,092.5/mt, down 1.05%. Trading volume reached 23,000 lots, open interest stood at 293,000 lots, up 406 lots from the previous trading day, mainly reflecting increased short positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 93,600 yuan/mt and touched a low of 93,480 yuan/mt at the open. Its center then moved higher to a high of 94,990 yuan/mt, after which copper prices maintained a fluctuating trend at highs, finally closing at 94,670 yuan/mt, up 0.17%. Trading volume reached 51,000 lots, open interest stood at 198,000 lots, down 533 lots from the previous trading day, mainly reflecting reduced short positions throughout the day.

[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.

[SMM Morning Zinc Briefing: Stronger US Dollar Index Put LME Zinc Under Pressure and Slightly Lower]: Overnight, LME zinc opened at $3,095/mt. After the opening, LME zinc fluctuated downward along the daily average line, hitting an intraday high of $3,097/mt. Near the close, LME zinc fell to a low of $3,027/mt, and finally closed down at $3,038.5/mt, down $64.5/mt, a decline of 2.08%, while trading volume decreased to 11,298 lots...

[SMM Silicon-Based PV Morning Meeting Summary] Silicon Metal: Spot silicon metal prices remained in a stalemate consolidation. Yesterday, SMM east China oxygen-blown #553 silicon was at 9,100-9,300 yuan/mt, and #441 silicon at 9,300-9,500 yuan/mt, unchanged from the previous day. The quote center of some silicon enterprises was slightly lower than that of trading firms engaging in both spot and futures market, while downstream users mainly transacted at lower prices, and overall market trading activity was subdued. Polysilicon: N-type recharging polysilicon was quoted at 38-47 yuan/kg. Polysilicon prices continued to decline somewhat recently, mainly affected by market sentiment and inventory clearance by some leading enterprises. At present, low-priced polysilicon has already fallen below the cost line of some manufacturers, and the sentiment to hold quotes firm has strengthened somewhat. The upstream market was also still watching wafer price movements.

[SMM Cast Aluminum Alloy Morning Comment: Aluminum Prices Halted Their Decline, but Wait-and-See Sentiment Remained Unchanged; Rangebound Movement May Continue in the Short Term] Spot market, yesterday the overall ADC12 market continued to hold prices steady. Aluminum prices showed signs of halting their decline, but market sentiment recovered only limitedly, and enterprises generally chose to postpone price adjustments and mainly adopt a wait-and-see stance. Demand side, downstream orders did not improve significantly, and just-in-time procurement remained the main approach, with mediocre transaction performance. Against the backdrop of easing cost-side fluctuations and insufficient demand support, ADC12 prices may continue to fluctuate within a range and remain relatively stable in the short term, with relatively limited momentum for price adjustments. Further attention should still be paid to aluminum price trends and the recovery of end-use demand.

Futures: Overnight, LME lead opened at $1,895.5/mt. After the opening, prices quickly fell to $1,885.5/mt, then fluctuate rangebound within the $1,888–1,896.5/mt range, with a balanced tug-of-war between longs and shorts and cautious market sentiment. After 0:00, prices rose further, breaking above the previous trading range and touching a high of $1,901/mt, before finally closing at $1,898.5/mt. A small bullish candlestick was recorded, up $0/mt, or 0.0%. Overnight, the most-traded SHFE lead 2605 contract opened at a low of 16,420 yuan/mt. In early trading, SHFE lead prices rose rapidly, then saw wide swings within the 16,440–16,481 yuan/mt range, with an evident tug-of-war between longs and shorts. Intraday volatility narrowed, and prices gradually stabilized around 16,455–16,465 yuan/mt, while trading volume pulled back simultaneously and market sentiment turned cautious. Late in the session, SHFE lead broke upward again, touching a high of 16,500 yuan/mt, then quickly pulled back to finally close at 16,470 yuan/mt. A small bullish candlestick was recorded, up 50 yuan/mt, or 0.3%. On the macro front: 1. Poll: Trump’s approval rating fell to its lowest level since returning to the White House. 2. US media: The US Department of Justice admitted it lacked evidence in its investigation into Powell. 3. Turkey considered using its $135 billion gold reserves to defend the lira. 4. Israeli media: The US intended to seek a one-month ceasefire to discuss a 15-point agreement with Iran. 5. Goldman Sachs maintained its overweight recommendation on Chinese equities (A-shares and Hong Kong stocks). Spot fundamentals: SHFE lead remained in the doldrums, while suppliers held prices firm on shipments. Quotations in Jiangsu, Zhejiang, Shanghai were raised slightly in spot premiums, while quotations for cargoes self-picked up from production site at primary lead plants changed little. Mainstream producing areas quoted premiums of 0-50 yuan/mt against the SMM #1 lead price, with a few quoting premiums of 100 yuan/mt ex-works. On the secondary lead side, some secondary lead enterprises had maintenance plans, and circulating cargoes in the spot market were limited. Secondary refined lead was quoted at premiums of 0-75 yuan/mt against the SMM #1 lead average price, ex-works. Downstream enterprises maintained purchasing as needed, but some engaged in more bargaining. In addition, as secondary lead prices inverted against primary lead, spot order purchases tilted toward primary lead. Inventory: As of March 24, LME lead inventory fell by 725 mt, or 0.26%, to 283,350 mt. As of March 23, SMM social inventory of lead ingot across five regions pulled back somewhat from previous inventory at high levels. Today’s Lead Price Forecast: Supply side, primary lead smelters held firm offers, and spot premiums in Jiangsu, Zhejiang, Shanghai were raised slightly, while quotations for cargoes self-picked up from production site at primary lead smelters changed little. Some secondary lead smelters had maintenance plans, and circulating cargoes in the spot market were limited. Demand side, downstream enterprises maintained purchasing as needed, but some engaged in more bargaining, and as secondary lead prices inverted against primary lead, spot order procurement tilted toward primary lead. According to SMM analysis, SHFE lead prices were likely to remain in the doldrums in the short term.

[SMM Tin Brief Commentary: SHFE Tin Stopped Falling and Rebounded, Closing Up 2.94% as Macro Pressure and Bottom Support Vied Against Each Other]

SMM, March 25: Overnight, LME lead opened at $1,895.5/mt. After the opening, prices quickly fell to $1,885.5/mt, and then fluctuate rangebound within the $1,888–1,896.5/mt range, with a balanced tug-of-war between longs and shorts and relatively cautious market sentiment. After 0:00, prices rose and broke above the previous trading range, hitting a high of $1,901/mt before closing at $1,898.5/mt. A small bullish candlestick was recorded, up $0/mt, or 0.0%. Overnight, the most-traded SHFE lead 2605 contract opened at a low of 16,420 yuan/mt. In early trading, SHFE lead prices rose rapidly, and then saw wide swings within the 16,440–16,481 yuan/mt range, with an evident tug-of-war between longs and shorts. Intraday volatility narrowed, with prices gradually stabilizing around 16,455–16,465 yuan/mt, while trading volume also pulled back and market sentiment turned cautious. Late in the session, SHFE lead again broke upward, hitting a high of 16,500 yuan/mt, then quickly pulled back to close at 16,470 yuan/mt. A small bullish candlestick was recorded, up 50 yuan/mt, or 0.3%. Supply side, primary lead smelters held firm offers, while spot premiums in Jiangsu, Zhejiang, Shanghai edged up slightly, and quotes for primary lead smelter cargoes self-picked up from production site changed relatively little. Some secondary lead smelters had maintenance plans, and spot market circulating cargoes were limited. Demand side, downstream enterprises maintained purchasing as needed, but some engaged in more bargaining. In addition, as secondary lead prices were inverted against primary lead, spot order purchases tilted toward primary lead. According to SMM analysis, SHFE lead prices are likely to remain in the doldrums in the short term.

As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.