June 11, 2026 The Big Picture The sharp rise in the price of gold since 2023 peaked at $5,500 earlier this year. Since then, the price has been clearly trending downward. Recently, the 200-day moving average and the upper line of the green trend channel were broken to the downside. Currently, there are four support levels: + the round number of $4,000 + the low from late 2025 at this level + the upper line of the orange trend channel + the purple upward trend line (derived from the 24-day lows) Should the gold price fall even further, another massive support level awaits in the $3,400–$3,500 range. Here, on the one hand, lies the resistance zone from 2025, which had formed prior to the last two upward waves (gray line), and on the other hand, the middle line of the orange trend channel and the lower green trend line. Below that, the round figure of $3,000 would come into focus—that is also where the lower line of the orange trend channel will be located in the near future. Source: Comdirect Source: https://goldinvest.de/en/chart-update-gold-will-it-hold-at-4-000-where-are-the-next-support-levels

[Domestic and overseas aluminum prices see a modest simultaneous recovery; China's destocking stabilizes with limited upside room] SMM maintains its assessment that inventory will drop to around 1.28 million mt by late June, and is expected to further approach 1.2 million mt by end-June or early July. The futures market sees short-term stabilization signals, but high domestic inventory pressure remains relatively evident, which is expected to limit the upside room for domestic aluminum prices. In the short term, domestic aluminum prices are expected to mainly fluctuate and consolidate.

On the afternoon of June 2, the People's Government of Leiyang City and Centennial Tree Group Co., Ltd. signed an investment cooperation agreement for the green smart manufacturing project of high-end silicon-aluminum-based functional new materials with an annual capacity of 300,000 mt. The green smart manufacturing project for high-end silicon-aluminum-based functional new materials is expected to cover a total area of about 310 mu, build workshops of approximately 90,000 m², and is planned to have a deep processing capacity of 300,000 mt per year. After completion, it will rely on Leiyang's abundant kaolinite resources to realize full-chain production from raw ore mining to high-end ceramic raw materials, coating fillers, and papermaking additives.

Jinqiao Green New Materials (Jiangmen) Co., Ltd. plans to construct a pure electric low-carbon aluminum alloy project, which is currently in the environmental impact statement acceptance announcement stage.

From June 3 to June 5, Indonesia Critical Minerals 2026 was held at the Pullman Jakarta Central Park in Jakarta, Indonesia. The conference was organized by Shanghai Metals Market (SMM) and co-organized by the Indonesia Nickel Miners Association (APNI) , the Ministry of Foreign Affairs of the Republic of Indonesia , the National Economic Council of Indonesia , and MMR , in a strategic partnership with the Jakarta Futures Exchange . The conference featured six dedicated forums: the main forum, the nickel and cobalt forum, the tin forum, the coal & energy transition forum, the aluminum forum, and dedicated sub-forums, attracting 3,500+ attendees from 45 countries and regions worldwide, featuring more than 120+ speakers sharing insights on market prices, supply-demand patterns, industry policies, low-carbon development, and ESG development, etc. Additionally, SMM has also meticulously arranged two rounds of panel discussions: Senior Executives' Roadmaps to Overcome Resource, Cost, Technology & ESG Challenges The "Green Premium" Myth vs. Reality: Who Will Pay for Decarbonization in the Critical Minerals Supply Chain? Conference Background In recent years, global nickel and cobalt raw material supply has frequently encountered various disruptions: Indonesia significantly lowered its nickel ore mining quota to 260–270 million mt, tightening nickel resource release at the source; the DRC continuously reduced cobalt ore export quotas, leading to a marked contraction in tradable cobalt raw materials worldwide. Multiple supply variables continued to roil nickel and cobalt commodity futures. Meanwhile, Indonesia is not only the core hub of the global nickel industry chain but also a key production area for global new cobalt supply at this stage. Its industrial control policies, commissioning pace of capacity, and industry chain layout changes directly shape the evolution of the global nickel-cobalt supply-demand pattern. Currently, the global nickel and cobalt industry is at a critical development stage featuring supply-demand restructuring, policy innovation, and value reassessment. To accurately forecast the nickel and cobalt market trends in 2026, deeply analyze the latest industrial control details in Indonesia, and help upstream and downstream players across the industry chain break down collaboration barriers, the Nickel and Cobalt Forum was launched. The forum brought together global mines, smelters, trading firms, downstream end-users, and investment and financing institutions to conduct in-depth discussions on key topics such as market supply and demand trends, policies and regulations, production technology iteration, and cross-border industrial cooperation, jointly exploring new growth drivers for high-quality industry development. Click to view the conference photo gallery June 4: Keynote Speeches Keynote Speech: Mining Regulatory Outlook: RKAB Quota Planning and Indonesia's Next-Phase Downstream Mineral Expansion Path Guest Speaker: Totoh Abdul Fatah, Secretary General of the Directorate General of Mineral and Coal, Ministry of Energy and Mineral Resources Totoh Abdul Fatah noted that RKAB is the key policy instrument for Indonesia to regulate mineral output, coordinate the orderly rollout of industries, and align with the nation's downstream industrialization priorities. Indonesia is endowed with exceptional mineral and coal resources, with significant reserves and capacity in several key strategic commodities including nickel, cobalt, copper, tin, bauxite, gold and silver, and iron ore. Leveraging these unique resource advantages, Indonesia holds a critical strategic position in the global mineral supply chain, and its value is especially prominent in the energy transition wave, providing strong support for the development of power batteries, renewable energy equipment, and high-end manufacturing. The next phase of downstream mineral development is not about curbing growth, but about improving development quality, clarifying development direction, strengthening regulatory management, and reinforcing the sustainability of growth. Future smelter layout must match ore supply capability, be aligned with resource conservation, and coordinate multiple factors including energy infrastructure readiness, environmental protection access standards, and domestic industry value addition. In light of these considerations, the Indonesian government is promoting an industrial logic shift from pure capacity expansion to strategic optimization of resource allocation, ensuring that mineral resources are precisely directed to industry segments that can maximize national economic benefits. Indonesia's downstream mineral industrialization has made concrete progress. Currently, 14 smelters are in operation, primarily producing products such as nickel oxide, pig iron, and copper cathode. Covering both existing operating plants and new projects under construction, the entire industry chain has attracted a total realized investment of $7.849 billion. Breakdown: nickel sector investment of $2.535 billion, aluminum sector $2.181 billion, iron ore projects $47 million, and copper sector $3.084 billion. This is continuously improving the supporting system of the domestic mineral industry chain. This progress demonstrates that Indonesia's downstream mineral policy has achieved tangible results. However, challenges remain for the industry: not only must new smelting projects be completed and commissioned on schedule, but they also require stable supporting supply to achieve efficient operations, green and low-carbon production, and deep integration into the domestic industry chain value system. Indonesia's development direction is very clear: the downstream transformation of minerals will continue to advance, and during the implementation process, policy enforcement constraints and top-level strategic guidance will be further strengthened. The RKAB management system and ore source allocation control rules are key to building a robust and more resilient industrial ecosystem. Future smelting project planning needs to coordinate four key dimensions: sustainable resource development, supply-demand market equilibrium, ESG compliance implementation, and enhancement of national value added. Indonesia has always been open to quality investment, especially high-quality investment, relying on foreign capital to achieve technology transfer and localization, expand local employment, and support long-term economic growth. In other words, Indonesia's industrial development not only pursues growth, but is committed to achieving high-quality growth that is compliant, sustainable, and globally competitive. Keynote Speech: Nickel at a Crossroads：A Five-Year Outlook on Global Nickel — Navigating Policy, Supply, and Demand Shifts Speaker: Thomas Feng, Head of Industry Research, Shanghai Metals Market Feng projects that the global primary nickel market will show a supply deficit in 2026, continue the oversupply trend in 2027, and shift to a tight balance in 2029. Regarding refined nickel prices, on the cost side, global sulfur supply and demand will face a persistent deficit in the next 2–3 years. In the case of short-term strait blockades, sulfur prices remain high, strengthening the cost support for the sulfur-MHP-refined nickel chain. From a macro perspective, the U.S.-Israel-Iran conflict has triggered wild swings in energy prices, pushing up inflation expectations. In the short term, global commodity prices will face considerable fluctuations. In the long term, global geopolitical uncertainty may become the new normal in the future, increasing the volatility of refined nickel prices. Nickel Ore Upstream Repricing: Indonesia's Benchmark Price Raise, Quota Tightening, and Increased Dependence on the Philippines Indonesia Nickel Ore RKAB Quotas: Tight Balance Emerges as the 2026 Main Theme According to SMM analysis, following the Indonesian Ministry of Energy and Mineral Resources' (ESDM) official denial of market rumors that RKAB production quotas would be raised across the board by 25%–30%, the government will handle supplementary quotas under strict case-by-case reviews starting from H2 2026, evaluating each miner's compliance, capacity, and resource reserves. At its core, this constitutes a routine and orderly optimisation of the existing 260–270 million wmt quota cap, paving the way for a more stable and sustainable market environment. Supply RKAB Approval Progress: As of April, Indonesia's cumulative approved RKAB quotas stand at 240 million wmt. SMM expects that, under expectations of continued nickel ore supply tightening, supplementary quotas around mid-year 2026 will be approximately 15%. Philippine Import Driver: SMM expects that this year, Indonesia's nickel ore imports from the Philippines will rise from approximately 15 million in 2025 to 22 million. Tightness in the domestic trade nickel ore supply will accelerate supplementation through imports from the Philippines. Demand Affected by the tight sulfur supply, MHP output has fallen short of earlier expectations. As a result, Indonesia's nickel ore demand for full-year 2026 is expected to be reduced to 303 million wmt. In 2026, actual nickel ore production will remain constrained by factors such as the rainy season and the pace of RKAB quota approvals, leaving overall output below theoretical supply levels. Panel Discussion: Upstream Opportunities & Challenges for Nickel Mine Owners Moderator: Enzo Brooklyn, Senior Nickel Analyst, SMM Panelists: Luca Maiotti, Policy Analyst, Organisation for Economic Co-operation and Development (OECD) Aldo Namora, President Director, PT Ceria Metalindo Prima Jerome Baudelet, CEO, Eramet Indonesia Patrick Lim, Country Head, HyperStrong Indonesia Keynote Speech: Achieving Energy Efficiency and Operational Success: The MMD Approach at Mah Moe Speaker: Fuad Budidarma Pratama, General Manager, MMD Mining Machinery Indonesia Keynote Speech: Global Nickel Market Outlook Speaker: Ricardo Ferreira, Director of Market Research and Statistics, International Nickel Study Group (INSG) Ricardo Ferreira noted that global primary nickel production is estimated to have declined by approximately 4% YoY, measured across the full chain from raw ore mining to finished primary nickel products. Most of this decrease originated from Indonesia, while expectations also pointed to a pullback in Chinese nickel output. According to the monthly bulletin released earlier, global primary nickel already edged down by about 1% in Q1, with Indonesia down roughly 3% and China down about 1%. Keynote Speech: New Refining Technologies for Laterite Nickel and Spent Batteries Speaker: Dr. Chunwei Liu, Managing Director of Resource Extraction, Botree Recycling Technologies Distribution of Laterite Nickel Ore Resources Laterite nickel ore accounts for 55% of global nickel resources and is the main source of nickel for industrial production worldwide. With the continuous development and promotion of high-nickel batteries, market demand for nickel—and consequently for laterite nickel ore processing—has grown significantly. Geographic concentration: Mainly distributed in tropical countries within 30° north and south of the equator. Three core regions: Southeast Asia: Indonesia, the Philippines (major laterite nickel ore producing areas). Americas: Cuba, Brazil. Oceania: Australia, New Caledonia. Panel Discussion: Nickel Price Volatility, Product Spreads, and Policy Shifts: What Will Define the Market in the next 5 years? Moderator: Slupek Kamila, Secretary-General, INSG Panelists: Jim Lennon, Analyst, Macquarie Septian Hario Seto, Member, National Economic Council Republic of Indonesia Denis Sharypin, Strategic Marketing Director, Norilsk Nickel Edric Koh, Head of Corporate Sales, Asia, London Metal Exchange Mark Selby, CEO & Director, Canada Nickel Company Keynote Speech: Korean Battery Supply Chain Strategy and Indonesia's Role Speaker: James (IKHWAN) Choi, Country Manager, Korea Office, SMM Korea Office Keynote Speech: Retreat or Evolve? The Counter-Attack of High-Nickel Batteries under the LFP Siege: Solid State, 4680, and the "Range Anxiety" Premium Speaker: Jared Zhu, Head of Consulting, Renewable Energy & Non-ferrous Metals, Shanghai Metals Market Jared noted that LFP batteries have steadily increased their market share in power battery and energy storage markets in recent years. With the rapid development of emerging sectors such as humanoid robots, industrial robots, and electric vertical take-off and landing vehicles (eVTOL), ternary batteries, leveraging their performance advantages, are more competitive than LFP batteries. Solid-state batteries are regarded by the industry as a must-win field for future competition, but it is worth noting that this new technology, capable of rewriting industry rules, still has a long development cycle before full commercialization. Positioning in the LFP Era LFP Accelerates Replacement of Ni-Co-Mn in Energy Storage and EVs, Leading in Scale and Growth SMM forecasts the global share of EV power battery types from 2026 to 2027, expecting LFP batteries to account for around 68% in 2026, with that ratio rising to about 70% in 2027. For ESS battery types, from 2022 to 2025, the share of LFP batteries in global ESS batteries continued to rise, and in 2026, it is expected to increase to around 99%. Keynote Speech: QMAG - Market Leader of Calcined Magnesia for Nickel/Cobalt MHP Production Speaker: Christoph Beyer, Managing Director of Queensland Magnesia (QMAG) Dr. Keynote Speech: Cobalt in Focus: Powering the Next Chapter of Critical Minerals Speaker: Dinah McLeod, Director General, Cobalt Institute June 5: Nickel and Cobalt Forum Keynote Speeches Keynote Speech: Balancing Risk and Reward: Investing in Indonesia's Nickel and Cobalt Value Chain Speaker: Izzie Huo, Senior Research Fellow, Shanghai Metals Market Panel Discussion: Too Much Nickel? Balancing Oversupply Risks with Long-Term Investment in Indonesia Moderator: Jean Tang, Commercial Director, Shanghai Metals Market Panelists: Ali Safdar, Managing Director & Partner, BCG (Boston Consulting Group) Arif Perdana Kusumah, Chairman, Forum Industri Nikel Indonesia (FINI) Ditya Maharhani Harninda, Senior Vice President Corporate Banking 2, PT Bank Negara Indonesia Tbk (Persero) Keynote Speech: Valve Solutions for Severe Service in HPAL Speaker: Changsong Deng, President of International Business Division, ANTIWEAR Keynote Speech: Breaking the Import Dependency: Economics and Feasibility of Pyrite-based Acid Production for Indonesia's HPAL Supply Chain Speaker: Bede Beresford Evans, President Director, PT Sumbawa Timur Mining Keynote Speech: Key Technology and Economic Analysis of AI Power Microgrid Solutions in Mining Speaker: Frank Qi, CEO, Ai Power (Suzhou) Technology Co., Ltd. Keynote Speech: Value of Analytical Solutions in Mining Processes Speaker: Toh Tiong Yen, Sales Manager, Malvern Panalytical Keynote Speech: New Caledonia's Nickel Landscape Speaker: Gabriel Bensimon, Special Advisor to the President of the Government on Nickel and Mining-Related Matters, The Government of New Caledonia Keynote Speech: Global Flow of Nickel from Mining to End-Use Speaker: Dr. Steukers Veronique, President, Nickel Institute Primary nickel production is now dominated by Indonesia. In 2025, Indonesia produced around 50% of the world's primary nickel, compared to just 6% a decade earlier. Primary nickel production in the rest of the world declined. In 2025, primary nickel production in the rest of the world, excluding Indonesia and China, accounted for just over 20% of the global total, down from 65% a decade earlier. Indonesia and China are the core driving forces shaping the global nickel supply chain landscape. From the perspective of nickel product circulation structure, NPI, backed by Indonesia's capacity advantage, firmly dominates the circulation mainstream; in terms of global nickel raw material supply by grade, Class 2 nickel accounts for approximately 58%, Class 1 nickel for just under 30%, and nickel chemical products for the remaining around 13%. Panel Discussion: Meet the Future of ESG: Standard, Challenges and Opportunities in Mining and Processing Moderator: Katz Benjamin, Policy Analyst, OECD Panelists: Dr. Chris Schlekat, Executive Director of NIPERA, Nickel Institute Ning Wang, Manager, Sustainable Development Department, China Chamber of Commerce of Metals, Minerals & Chemicals Importers & Exporters Yumo Li, Head of ESG Office in Tsingshan Board, Tsingshan Holding Group Vinícius Mendes Ferreira, Executive Advisor for Nickel Downstreaming, PT Vale Indonesia Fan Li, Sustainability and ESG Services Manager, dss+ Tom Fairlie, Senior Sustainability Manager, Cobalt Institute

From June 3 to June 5, the Indonesia Critical Minerals 2026 was held at the Pullman Jakarta Central Park in Jakarta, Indonesia. The conference was organized by Shanghai Metals Market (SMM) and co-organized by the Indonesia Nickel Miners Association (APNI) , the Ministry of Foreign Affairs of the Republic of Indonesia , the National Economic Council of Indonesia , and MMR , in a strategic partnership with the Jakarta Futures Exchange . The conference featured six dedicated forums: the main forum, the nickel and cobalt forum, the tin forum, the coal & energy transition forum, the aluminum forum, and dedicated sub-forums, attracting more than 3,500+ attendees from 45 countries and regions worldwide, featuring more than 150+ speakers sharing insights on market prices, supply-demand patterns, industry policies, low-carbon development, and ESG development, etc. Conference Background In the process of global industrial upgrading, the strategic value of critical metals has become increasingly prominent, and Southeast Asia has gradually emerged as a highly dynamic segment of the global mining landscape. As a major regional mineral producer, Indonesia has successively introduced multiple industrial policies for critical metals such as nickel, tin, aluminum, and copper, adjusting and optimizing areas including mining quotas, pricing mechanisms, tax policies, export management, and domestic market obligation over recent years. These efforts are guided by the goals of strengthening the regulatory framework, enhancing industrial added value, and optimizing resource revenues, and have had a significant impact on the global metal supply chain and market dynamics. As Indonesia’s premier flagship event for the mineral industry, this conference focuses on supply chain security of critical minerals including nickel, cobalt and tin, and adopts a dual-driven model of mining and energy. It commits to promoting Indonesia’s industrial upgrading from raw material export to high-value industrial chain development, while providing solid resource support and practical cooperation paradigms for regional and global energy transition. 》Click to view the photo gallery of the conference June 3: Main Forum Opening Ceremony Adam Fan, Chairman, Shanghai Metals Market Nanan Soekarna, Chairman, APNI Arif Havas Oegroseno, Vice Minister, Ministry of Foreign Affairs Ciyong Zou, Deputy to the Director General and Managing Director of the Directorate of Technical Cooperation and Sustainable Industrial Development, UNIDO (United Nations Industrial Development Organization) Sherly Tjoanda, Governor of North Maluku, North Maluku Government Todotua Pasaribu, Vice Minister, Ministry of Investment and Downstream Industry of Indonesia Drum Performance & Dance Show Opening Address Speaker: Adam Fan, Chairman of SMM Adam stated that this year marks the 4th year of the Indonesia Critical Minerals Conference. This flagship industry event is dedicated to building a global platform connecting Indonesia with the world. Empowering mineral resources through technology, the conference links producers and consumers to facilitate industrial chain and business cooperation. Boasting a record-high attendance, this year’s event gathers 3,500+ participants and 150+ speakers. The growing participation of global countries, enterprises and industry professionals demonstrates rising international trust and confidence in Indonesia’s critical mineral ecosystem. As cross-border collaboration is essential for building a robust global critical minerals supply chain, the conference strives to enhance supply chain transparency, interconnectivity and in-depth global industrial cooperation by bringing together industry insights and resources. Speaker: Nanan Soekarna, Chairman of APNI Nanan Soekarna stated in his remarks that the 4th Indonesia Critical Minerals was the largest to date in terms of attendance, demonstrating the global industry’s full confidence in Indonesia’s minerals industry, cross-border cooperation models, and Indonesia’s roadmap for sustainable mining development, and he extended his sincere gratitude to all participating partners. He noted that the core of development in the critical minerals sector has shifted from a simple contest of resources and capacity to the transformation of the sustainable value of natural resources, balancing diverse economic, social, and environmental benefits. By deepening downstream industry chain expansion, Indonesia aims both to enhance industrial value-added and to strengthen Indonesia's industrial positioning international and credibility in the global market. In the future, the core of global mining competition will not lie in resource reserves, but in transparent, responsible, and sustainable resource governance capabilities. Relying on global partners, Indonesia will uphold the philosophy of sustainable mining development and, through high-quality cooperation and shared value principles, work together to build the future of the critical minerals industry that balances ecology, benefits, and long-term development. Speaker: Arif Havas Oegroseno, Vice Minister, Ministry of Foreign Affairs Arif Havas Oegroseno mentioned that critical minerals are increasingly becoming a focal point of global geopolitical competition, with elements such as energy, minerals, and trade and economic rules being instrumentalized from time to time. Leveraging its domestic resource endowments, Indonesia is vigorously advancing downstream deep processing of minerals; this strategy is not limited to industrial upgrading, but is also a comprehensive development initiative that boosts employment, consolidates science and technology innovation capabilities, enhances industry chain resilience, and delivers inclusive gains from green development. In response to procurement demands from multiple parties, Indonesia adheres to a diversified cooperation approach by expanding a diverse range of procurement partners and promoting deeper participation by resource countries in technology R&D and industry chain value-added, thereby avoiding the risks of dependence on a single partnership. He also noted that for the future governance of critical minerals, ESG should truly become a competitive advantage for enterprises rather than a trade barrier, with its original purpose being to optimize environmental management, improve social responsibility, and empower enterprises to enhance quality and efficiency. In the face of a new round of industrial transformation, critical minerals serve as the core raw materials for energy transition, the digital economy, and the development of high-tech industries. Based on its resource endowment, Indonesia is determined to transform from a mineral resource producer into a reliable partner in the global industry chain and a co-builder of industry rules. It invites global investors, industry chain producers, and resource-producing countries to join hands, uphold the spirit of partnership, reject unreasonable additional conditions, and jointly build a new global pattern for critical minerals that is inclusive and universally beneficial. Keynote Speech: Investing in Critical Minerals Downstreaming: Unlocking the Full Value of Indonesia's Resources Guest Speaker: Todotua Pasaribu, Vice Minister, Ministry of Investment and Downstream Industry of Indonesia Todotua Pasaribu stated that against the backdrop of climbing global demand for critical minerals and concentrated resource origins, the strategic attributes of this category continue to stand out. Indonesia, leveraging its resource endowment, vigorously promotes the downstream transformation of the entire industry chain, which is a core national policy to boost the economy and optimize supply chain structures. Under the president's policy deployment, Indonesia has designated mineral deep processing as a pillar of industrial upgrading. The authorities have delineated 28 categories of strategic minerals across eight major sectors and estimated potential investment in related tracks at approximately $618 billion, which is expected to create 3 million new jobs annually upon implementation. The country has set investment attraction targets from 2024 to 2029, accompanied by annual implementation plans. The 2026 target is clear, and investment implementation progress in the first quarter has been steady. In recent years, downstream industry investment has accounted for nearly 30% of national fixed asset investment, becoming a key driver to boost the economy and helping the country sprint toward the 8% economic growth target by 2029. He further explained that Indonesia has already established downstream layouts in multiple critical mineral tracks, including nickel, tin, aluminum, copper, PV raw materials, and semiconductor raw materials. The nickel industry has extended from stainless steel production to the entire power battery industry chain, while the tin, aluminum, and copper sectors continue to expand into deep processing, electronic materials, and other high-value-added categories, synchronously deploying supporting industry chains for PV and semiconductors. To solidify the conditions for industrial implementation, Indonesia has optimized the business environment in three aspects: accelerating approval processes, providing infrastructure support, and offering policy incentives. It has shortened project approval cycles, improved supporting facilities for hydropower, ports, and transportation, and implemented supportive measures such as tax reductions and tariff preferences, continuously attracting global capital and technological cooperation. This drives the country's transformation from a raw material exporter to a high-value-added product manufacturer, relying on multi-party collaboration to convert local mineral resources into sustainable industrial benefits. Guest Speaker: Ciyong Zou, Deputy to the Director General and Managing Director of the Directorate of Technical Cooperation and Sustainable Industrial Development, UNIDO (United Nations Industrial Development Organization) Zou Ciyong said global demand for critical minerals continues to rise along with the rapid development of clean energy and digital industries, and the role of resource countries in ensuring stable mineral supply is becoming increasingly critical. Indonesia's transformation path from raw material extraction to deep processing can provide reference for resource countries in the Global South. Currently, mining development still faces multiple challenges such as environmental protection, carbon emissions, and livelihood supporting facilities. Sustainable development has become an imperative for the industry, which needs to balance economic benefits, green development and social inclusion. Leveraging its multilateral platform advantages, UNIDO empowers its member states in multiple dimensions, including industrial policy, technology transfer, investment and financing, and capacity building, promotes the establishment of a Global Green Mining Cooperation Alliance, and has implemented a demonstration project of the Indonesia Nickel Industry Eco-Industrial Park, using the project as a model to explore a sustainable development path for global mining. He pointed out that the long-term development of the critical minerals industry cannot be separated from in-depth international cooperation, and it is necessary to establish transparent public-private partnerships, build resilient supply chains, and uniformly implement common industry standards. Indonesia intends to join forces with partners from all sectors to tap the development potential of the industry, while insisting on placing environmental protection and sustainability at the forefront of industrial development. In the future, UNIDO will continue to engage with governments, industries and capital from multiple parties, working together to achieve coordinated economic, social and environmental benefits from mineral resources. Keynote Speeches Keynote Speech: Beyond Volume: How North Maluku Can Lead Indonesia’s Next Phase of Sustainable Downstream Growth? Guest Speaker: Sherly Tjoanda, Governor of North Maluku Province Sherly Tjoanda elaborated on how North Maluku can lead Indonesia's next phase of sustainable downstream development from the perspectives of geographical location, transportation advantages, skilled talent reserves, and the fact that North Maluku's nickel ore is high-grade ore. Keynote Speech: Two Decades of Critical Minerals: 2016-2036 - How Supply Structures Shape Market Dynamics Guest Speaker: Shirley Wang, VP, Shanghai Metals Market The Rule —Why resource-rich nations must process, not just mine A 1931 Question: Mine Today, or Wait? Hotelling gave mining a theoretical anchor. It was elegant — and incomplete. A rational resource-based country should ensure the rate of price increase is exactly equal to the return on investment (Interest rate) Four Reasons the Real World Departs from the Formula Substitution, policy shifts, demand surprises, and costs — each bends the expected path The Quiet Force Behind All of This Ore grades decline everywhere. Building downstream is not ambition. It is adaptation. Shirley analyzed this by comparing ore grades for nickel, tin, copper, alumina, and others for the years 2016, 2026, and 2036. ► Strategic Insight: Why Low-Grade Ore Is Changing the Rules • Continuously declining grades are forcing industrial upgrading and iteration. Deteriorating raw ore quality is driving mines and smelters to optimize production, increasing the utilization of low-grade ore, the application of new processes, and the recycling of secondary resources. • Pricing power is gradually shifting from trading markets to resource-rich governments. As high-grade mineral deposits are depleted, the impact of short-term supply and demand on prices weakens, and the pace at which resource-rich nations release supply becomes the core variable. Industry Mainline: Commonalities in Two Decades of Development Across Five Metals Nickel: Where One Country Anchors the Market Indonesia influences marginal incremental nickel supply, and the commissioning pace of its domestic industry dominates global nickel price movements. The analysis incorporated the global distribution of nickel mine capacity. Cost Structures Are Moving Apart RKEF costs face the steepest climb. Scale mattered yesterday. Cost discipline matters tomorrow. The Ore Base Is Quietly Shifting Looking at changes in the global nickel production cost structure, the primary low-cost raw material was high-grade primary nickel ore before 2015. From 2016 to 2026, the share of low-grade ore and laterite nickel ore mining has been climbing steadily. Currently, laterite nickel ore stands as the most cost-competitive raw material. As laterite nickel ore grades decline, future nickel production based on sulphide ore may increase. Keynote Speech: Indonesia's Green Nickel: From Us To The Next Generation Guest Speaker: Joseph Hong, President Commissioner, Neo Energy Keynote Speech: AI is NOT optional! Guest Speaker: Adam Fan, Chairman of SMM Adam noted that AI has become an essential requirement for the digital upgrade of the commodity industry. Leveraging a new AI technology system, SMM integrates macro and micro data, market intelligence, and industrial information through full-process intelligent processing, and with human-machine collaboration automatically generates in-depth industry reports — surpassing traditional manual approaches comprehensively in terms of timeliness, coverage, personalization, and depth of analysis. SMM has now deployed a mature industry AI solution: leveraging SMM’s massive database and customized AI capabilities, enterprises can enable intelligent inquiries, interactive reviews, and dynamic strategy simulations, accurately serving transaction analysis, production planning, and inventory strategies for non-ferrous metals such as cobalt, nickel, and copper. SMM AI Data Services offer a three-tier progressive intelligent solution for the metals industry: Instant Inquiry → Xiao Jin (Metrix): access real-time price trends and market insights, with data sourced from a premium subscription-grade database and insights calibrated by senior analysts; In-depth Research → Deep Report: a chapter-by-chapter analysis by product and region, featuring traceable charts and citations, and continuously updated as market conditions evolve; System Integration → MCP Data Services: covering over 200,000 real-time data indicators and more than 60 products across the entire industry chain, a single integration embeds the service into the enterprise AI framework. Keynote Speech: Indonesia's Post-Election Economy: Can the Country Sustain 5–6% Growth Amid Fiscal Pressures, Weak Export Prices and Heavy Industrial Power Subsidies? Speaker: Andre Simangunsong, Head of Mandiri Institute, Office of Chief Economist, Bank Mandiri Andre Simangunsong said Indonesia’s GDP grew by 5.6% in Q1 2026, with a full-year baseline forecast of 5.2%. The strong Q1 growth was primarily driven by a low base effect from delayed fiscal spending in 2025 and the front-loading of this year’s fiscal disbursements. The full year faces uncertainties from rising crude oil prices, geopolitical fluctuations, and a widening fiscal deficit. The 2026 fiscal budget is approximately IDR 2,000 trillion, focusing on eight key areas such as education and food security; 19 major industrial projects have already commenced, with nickel smelting and industry chain parks accelerating establishment, propelling the mineral sector’s transformation from raw resource exports to high-value-added deep processing. Indonesia has revised nickel ore royalty rules, introducing progressive royalty rates, promoting the upgrade of nickel products from nickel pig iron (NPI) to MHP and nickel sulphate, and laying out hydrometallurgical processing for low-grade ores; the outlook for the tin industry is positive. The banking sector’s loan-to-deposit ratio remains stable at 85%, and Bank Mandiri is advancing digital transformation and ESG-compliant lending to empower downstream industry projects. By combining industrial, fiscal, and financial strengths, Indonesia is expected to maintain a growth range of 5%–6% in the medium and long term. CXO Panel: Senior Executives' Roadmaps to Overcome Resource, Cost, Technology & ESG Challenges Moderator: Laksmi Kusumawati, Director of Downstream Planning and International Economic Cooperation, Ministry of National Development Planning/Bappenas Panelists: Bernardus Irmanto, President Director, PT Vale Indonesia Alex Sun, Chief Sustainability Officer and Vice President, Integrated Energy Service and Carbon Management, Envision Group Marvin R. Reinhart, Portfolio Management Department Head, Indonesia Battery Corporation Ilhamsyah Mahendra, Production & Commercial Director, PT Timah Tbk Keynote Speech: Breaking the Diesel Dependency: Reliable, Affordable Energy for Island Mines Speaker: Mr. Fred Ge, C&I BESS Technical Solution Manager in Asia-Pacific, Sungrow Panel Discussion: The "Green Premium" Myth vs. Reality: Who Will Pay for Decarbonization in the Critical Minerals Supply Chain? Moderator： MARCO KAMIYA， UNIDO Representative, Regional Office in Jakarta for Indonesia, Timor Leste and the Philippines UNIDO (United Nations Industrial Development Organization) Panelists: Ary Sudijanto, Deputy for Climate Change Control and Carbon Economic Value Governance, Ministry of Environment, Government of Indonesia Antti Koulumies, CEO, Terrafame Anna Stancher, Senior Project Manager, Responsible Minerals Initiative Yumo Li, Head of ESG Office in Tsingshan Board, Tsingshan Holding Group Lihui Sun, Vice President, Chief Sustainability Officer, Huayou Cobalt Cocktail Party We extend our sincere gratitude to the global logistics leader Access World for its exclusive sponsorship of the cocktail party at this conference. Founded in 1933, Access World has grown from a family business into an international logistics organization operating in 25 countries, with a strategically located network of ports and warehousing facilities in prime locations, ensuring the efficient daily handling and flow of goods. As an end-to-end logistics service provider, Access World has long been committed to simplifying global supply chains and enhancing the efficiency of commodity circulation. It is worth noting that this marks the second consecutive year Access World has generously sponsored the cocktail dinner at the Indonesia Mining Conference & Critical Minerals Conference. For this steadfast commitment and dedication to deeply cultivating the industry and continuously empowering industry exchanges, the organizing committee and all attendees express our deep respect and gratitude. Check-in & Networking

On June 9, a fire broke out at Chemical Grade Plant 3, or CGP3, at the Greenbushes lithium operation. The fire was quickly extinguished, no injuries were reported, and CGP1 and CGP2 continued to operate as normal. The following day, IGO confirmed that its FY2026 spodumene concentrate production guidance of 1.375–1.425 million tonnes remained unchanged. Chemical Grade Plant 4, or CGP4, is scheduled to commence construction in 2027. Viewed in isolation, this was a well-contained operational incident. However, the location of the fire deserves closer attention. CGP3 is not part of Greenbushes’ existing production base. It represents incremental supply currently ramping up at the far-left end of the global lithium cost curve. The project involved approximately A$880 million of investment and is designed to add around 500,000 tonnes per year of spodumene concentrate capacity. First ore was fed into the plant in December 2025, and the facility had originally been expected to reach nameplate capacity around mid-2026. The damage assessment is still under way. Neither the repair cost nor the recovery timeline has been quantified. The fact that production guidance remains unchanged should therefore be understood as an initial assessment rather than a definitive conclusion. The key question is not whether IGO has immediately revised its annual guidance. It is whether the CGP3 ramp-up schedule will be delayed. Should the market be concerned when an incremental production line at the world’s lowest-cost lithium mine experiences an operational disruption? To answer this question, it is useful to examine the role of Australian lithium mines in the broader lithium pricing mechanism. Note on the CGP3 ramp-up timeline: At IGO’s FY2026 second-quarter results briefing in late January 2026, management stated that CGP3 had received first ore in December 2025 and would require approximately five months to ramp up to nameplate capacity. Some English-language transcripts recorded management as referring to completion “by the end of the calendar year.” However, based on the timing of first ore feed, a five-month ramp-up period would imply completion around mid-2026, before the end of Australia’s FY2026 financial year. This is also consistent with the company’s previous guidance. The transcript may therefore have intended to say “by the end of the financial year.” This article adopts the mid-2026 ramp-up assumption. The timing is relevant because the June 9 fire occurred only weeks before the originally expected completion of the ramp-up. The actual impact should become clearer in IGO’s fourth-quarter report, which is expected in late July. Greenbushes: A Reference Point at the Bottom of the Cost Curve Greenbushes’ most important advantage begins with ore grade. It is one of the world’s largest and highest-grade hard-rock lithium mines currently in production. Its ore grade is approximately twice the industry average. For a spodumene operation, grade directly affects processing efficiency. To produce one tonne of SC6 concentrate, Greenbushes needs to process materially less ore than a typical mine. This provides a structural advantage across mining, beneficiation, energy consumption and tailings management. Greenbushes also benefits from scale. The operation currently has several processing facilities, with combined nominal ore-processing capacity of around 6.5 million tonnes per year and spodumene concentrate capacity of up to approximately 1.5 million tonnes per year. Once CGP3 completes its ramp-up, the mine will add a further 500,000 tonnes per year of concentrate capacity. With the mine life extended to 2045, Greenbushes combines low costs with long-term supply capacity. This explains the mine’s resilience during the lithium price downturn. During 2024 and 2025, lithium prices declined sharply. A number of higher-cost Australian mines and Chinese lepidolite projects faced production cuts or temporary shutdowns. Greenbushes, however, continued to maintain relatively strong profitability and moved ahead with the CGP3 expansion. Greenbushes does not represent the industry’s average cost. It represents the most competitive end of the global hard-rock lithium cost curve. For that reason, Greenbushes is better understood as a reference point for the bottom of the cycle. As lithium prices fall, higher-cost supply exits first, while low-cost assets remain in operation. The closer prices move toward the cost range of Greenbushes, the fewer marginal producers remain capable of operating normally, and the more advanced the supply-side clearing process becomes. This does not mean that lithium prices can never fall below the cost level of Greenbushes. In the short term, inventory pressure, liquidity conditions and market sentiment can push prices below the cost levels implied by the marginal supply curve. Greenbushes is not an absolute price floor. Its significance is that it provides a structural reference point for assessing how far supply-side clearing has progressed. Greenbushes: The Largest Producer, but with Limited Freely Traded Supply Although Greenbushes produces large volumes of spodumene concentrate, relatively little of that material enters the open spot market directly. The mine is operated by Talison Lithium. Talison is owned by Tianqi Lithium Energy Australia, or TLEA, and Albemarle. TLEA is in turn jointly owned by Tianqi Lithium and IGO. Greenbushes concentrate is primarily distributed through shareholder offtake arrangements and supplied into the downstream conversion systems of Tianqi, Albemarle and their respective partners. Under normal conditions, the material is not sold directly into the open market. Greenbushes therefore provides a useful example of why lithium supply should be analysed through several different layers: Resources → Design capacity → Actual production → Saleable volume → Freely traded spot volume Greenbushes ranks among the world’s largest producers by actual output. However, because most of its concentrate is locked into shareholder offtake arrangements, the amount available for open-market trading remains relatively limited. This means Greenbushes affects lithium pricing mainly through indirect channels. First, it determines the size of the lowest-cost portion of global lithium supply and therefore plays an important role in shaping the lithium chemical cost curve. Second, its operating costs, offtake pricing mechanism and expansion schedule provide reference points for long-term contract negotiations and price assessments in the spodumene market. By contrast, short-term spot prices are often more directly influenced by marginal resources that are not fully locked into shareholder arrangements and must actively seek buyers in the market. These include certain Australian mines, African lithium resources and trader-held cargoes. This explains an apparent paradox. An additional 500,000 tonnes of Greenbushes concentrate capacity can materially change the medium-term supply-demand balance, yet its immediate impact on the spot market may be limited. Meanwhile, the shutdown or restart of a marginal mine producing only 100,000–200,000 tonnes per year can quickly influence spot quotations and market sentiment if its output is sold on a market basis. Short-term pricing is not determined solely by total production. It is also shaped by the volume of material that is freely available for negotiation and immediate transaction. The same logic applies to lithium carbonate. Price elasticity depends not only on total inventory but also on how much inventory is genuinely available for circulation. The largest producer does not necessarily exert the most direct influence over the spot market. Short-term marginal pricing is usually driven by the resources that are tradeable, negotiable and available for immediate delivery. However, shareholder offtake does not mean that Greenbushes material is completely isolated from the market. If lithium conversion plants within the Tianqi or Albemarle systems reduce operating rates, or if downstream conversion assets experience operational issues, part of the concentrate originally intended for internal consumption may re-enter the market indirectly through tolling, resale or inventory adjustments. These volumes are rarely captured in public statistics, but they can affect the actual liquidity of the spodumene market. Tracking this material requires a broader set of indicators, including shareholder conversion-plant operating rates, concentrate inventories, tolling arrangements and import flows. This type of “shadow spot supply” is harder to observe than nominal mine production, yet it can become relevant at specific points in the cycle. SC6 and Lithium Chemicals: The Direction of Price Transmission Reversed Within a Year The relationship between Australian spodumene concentrate prices and Chinese lithium chemical prices has completed a full cycle over the past year. During the first half of 2025, spodumene prices followed lithium chemical prices downward. Australian miners reduced costs materially in the first quarter but largely avoided production cuts. Mining companies remained willing to ship material, and the price of SC6 concentrate fell to around US$620 per tonne. Falling concentrate prices then placed additional pressure on lithium chemical prices, reinforcing the downward cycle. At the time, the key market question was straightforward: When would the mining sector finally reduce supply? The direction of transmission reversed in the end of third quarter. The announcement that 27 mining licences in Yichun could be cancelled, together with the suspension of the Jianxiawo mine, tightened expectations around domestic Chinese lithium supply. Lithium chemical prices moved first. SC6 prices then followed, with greater elasticity. By December, the monthly average price had recovered to around US$1,300 per tonne. Formula-based pricing mechanisms linked to lithium chemical prices allowed mining companies to capture a large share of the upside, while Chinese converters saw their processing margins squeezed. At the same time, the impairment and expansion adjustments at the Kwinana lithium hydroxide project highlighted the challenges facing Australian downstream conversion. The project has faced difficulties in cost control, production ramp-up and operational stability. TLEA’s Kwinana lithium hydroxide refinery was fully impaired in mid-2025, the second train was suspended, and IGO made clear that it would prioritize mining. These developments reinforce Australia’s role as a supplier of spodumene concentrate rather than a major lithium chemical conversion hub. As a result, the relationship between SC6 prices and Chinese lithium chemical prices is likely to remain strong. However, the speed and magnitude of transmission will continue to depend on inventories, contract formulas, shipping cycles and converter operating rates. One of the most useful indicators is the implied conversion margin between SC6 concentrate and lithium chemical spot prices. When the implied conversion margin turns negative, Chinese converters purchasing third-party concentrate are effectively losing cash on incremental production. The market then needs to rebalance through at least one of three channels: Spodumene concentrate prices decline; Lithium chemical prices rise; Converters reduce operating rates. This indicator provides a useful way to judge whether bargaining power currently sits with the mining segment or the conversion segment. Australian Mine Restarts: Lithium Prices Develop an Upper Constraint The key theme for Australian lithium mines during 2024 and 2025 was supply-side clearing. In 2026, the theme has shifted toward reactivation. As lithium prices recovered during the first half of the year and futures briefly exceeded RMB 200,000 per tonne, a series of restart decisions emerged across May and June. Project Action Timing Key Point Bald Hill, Mineral Resources Restart after approximately 18 months of suspension Restart announced in May; first concentrate expected in July Restart cost of around A$20 million Ngungaju, PLS Processing plant restart Planned for July Approximately 200,000 tonnes per year of restored output Finniss, Core Lithium Final investment decision approved; financing secured Targeting first ore in the third quarter Financing package of approximately US$205 million Kathleen Valley, Liontown Expansion under assessment Ongoing Further details pending Mt Cattlin, Rio Tinto Remains suspended Suspended since March 2025 Restart conditions remain unclear Taken together, these cases show that the true threshold for mine restart is more complex than a simple comparison between lithium prices and cash costs. Bald Hill moved from restart announcement to expected first concentrate production in around two months. The mine had remained in a production-ready care-and-maintenance state, and Mineral Resources has its own mining-services platform, allowing it to mobilize mining, crushing and haulage internally without relying heavily on external contractors. This type of asset represents the fastest-reacting segment of supply when prices recover. Finniss is a different case. The project first monetized inventories through Glencore to improve liquidity, then assembled a financing package involving convertible debt, additional borrowings and equity issuance before reaching a final investment decision. For miners with weaker balance sheets, a restart is not simply an operational decision. It is a financing event. A low-price cycle does not eliminate the resource base. It eliminates the ability to finance production. The market impact of the restart wave is already visible. Lithium carbonate futures reached a two-year high of RMB 200,500 per tonne on May 13 before retreating to around RMB 160,000–170,000 per tonne in June. One reason for the pullback is that the market has begun to price in the return of idle supply. The mechanism is straightforward: Prices rise → Idle capacity restarts → Expected supply increases → Prices come under pressure The list of suspended Australian mines, once ranked by restart economics and response time, effectively becomes an upside supply curve for lithium prices. The CGP3 fire and the restart wave represent two sides of the same market. At the low-cost end of the curve, incremental Greenbushes supply has experienced an operational disruption, creating a bullish signal. At the higher-cost end, idle assets are returning to production, creating a bearish signal. From a resource perspective, lithium prices in 2026 are searching for equilibrium between these two forces. Lithium Prices in 2026 May Become More Volatile, but One-Way Trends Could Be Shorter Once prices rise, the factor that ultimately limits the upside is the speed at which idle capacity returns to the market. Bald Hill, Finniss and Ngungaju represent a broader pool of suspended or standby assets that can respond when lithium prices move sufficiently above their cash-cost thresholds and remain there for long enough. However, restart supply is not instantaneous. From the moment a restart is announced, companies need to remobilize personnel, inspect equipment, resume mining and processing, build concentrate inventories and arrange shipments. Depending on the asset, concentrate may enter the market within two months or only after several quarters. This delay creates a window during which supply disruptions can push prices higher. The suspension of the Jianxiawo mine and the CGP3 fire at Greenbushes matter not because global lithium resources have suddenly become scarce, but because short-term freely available supply has tightened while idle capacity has not yet fully returned. Compared with the previous cycle, this risk-premium window appears to be shortening. An increasing number of mines are being placed on care and maintenance rather than permanently closed. Mining-services companies, traders and downstream customers are also becoming more involved in restart financing and offtake arrangements. Once prices move back above the relevant breakeven levels, some idle assets can return more quickly. This does not necessarily mean lithium prices will become more stable. Supply disruptions can still trigger rapid price increases. However, the duration and magnitude of one-way rallies are likely to face stronger constraints from restart expectations. Prices may become more volatile in the short term, but sustained unilateral trends could become shorter. Conclusion Australian lithium mines influence lithium prices through several distinct channels. Greenbushes provides a structural reference point at the bottom of the hard-rock lithium cost curve. However, because most of its output is absorbed through shareholder offtake arrangements, it does not directly determine short-term spot pricing. Spot-market tightness is more directly influenced by marginal saleable supply: Australian mines, African resources and trader-held inventories that are available for negotiation and immediate transaction. Once lithium prices rise, the speed at which suspended assets restart becomes the key constraint on the duration of the rally. The framework can therefore be summarized in three lines: Low-cost mines provide a structural reference point for the bottom of the cycle. Freely traded supply determines short-term spot-market tightness. The speed of mine restarts determines how long an upside cycle can last. The CGP3 fire and the restart wave sit at opposite ends of this framework. One represents a disruption to low-cost incremental supply. The other represents the return of higher-cost idle capacity. Lithium prices in 2026 will continue to seek equilibrium between these two forces. Lesley Yang Senior New Energy Analyst, SMM yangle@smm.cn

On June 9, a fire broke out at Greenbushes Chemical-Grade Beneficiation Plant 3 (CGP3). The fire was quickly extinguished with no casualties, CGP1 and CGP2 continued normal operations, and IGO confirmed the next day that its FY2026 concentrate guidance of 1.375 million to 1.425 million mt remained unchanged. CGP4 is planned to commence in 2027. Judging solely by the announcement, this was a well-handled operational incident. However, the location of the fire warrants closer attention: CGP3 is not existing capacity but incremental capacity being ramped up at the far left of the global cost curve – with a total investment of about AUD 880 million, designed to add approximately 500,000 mt/year of concentrate capacity, and which only achieved first feed in December 2025 and was originally expected to reach full production by mid-this year. The damage assessment is still ongoing, repair costs and timetable are yet to be quantified, and the so-called "guidance maintained" is based only on information from the initial stage of the incident. What merits tracking going forward is not the guidance itself, but whether the timing of reaching full production will be delayed. At the world's lowest-cost mine, a new production line has had a minor incident – should the market be concerned? Today, I aim to break down and clarify this mechanism by analyzing the role of Australian ore in the lithium price formation. Note: Clarification on the timeline for CGP3 reaching full production. At its FY26 Q2 results briefing in late January 2026, IGO stated that CGP3 achieved first feed in December 2025 and that ramp-up to nominal capacity would take approximately five months. Some English transcripts recorded management's remarks as "completing ramp-up before the end of the calendar year" (end of the calendar year). However, based on the timing of first feed, five months corresponds to mid-2026, i.e., before the end of the Australian financial year (FY26), which is consistent with the company's previously disclosed guidance of "reaching full production in mid-2026." The transcript likely mistook "end of the financial year" for "end of the calendar year." This article adopts the "mid-2026 full production" timeline. This timing implies that the June 9 CGP3 fire occurred a few weeks before the originally scheduled full production, and the actual impact will be confirmed in IGO's Q4 report (expected in late July). Greenbushes: A Benchmark at the Bottom of the Cost Curve Greenbushes' most fundamental advantage lies first in its ore grade. It is one of the world's largest and highest-grade hard-rock lithium mines in production, with raw ore grade roughly double the industry average. For spodumene mines, grade directly determines mining and processing efficiency. To produce one tonne of SC6 concentrates, Greenbushes needs to process significantly less raw ore than typical mines, giving it natural cost advantages in mining, beneficiation, energy consumption, and tailings management. Building on its high-grade ore, Greenbushes also benefits from economies of scale. The mine site now hosts multiple beneficiation plants with a combined nominal processing capacity of approximately 6.5 million mt/year, supporting a maximum lithium concentrate capacity of up to 1.5 million mt; once CGP3 has fully ramped up, it will add roughly 500,000 mt of additional concentrate capacity. With the mine life further extended to 2045, Greenbushes not only possesses low-cost advantages but also strong long-term supply capability. This is why Greenbushes has demonstrated significant resilience during the lithium price downturn. From 2024 to 2025, as lithium prices continued to pull back, many high-cost Australian mines and Chinese lepidolite projects faced pressure to suspend or cut production, yet Greenbushes maintained relatively sound profitability and continued to advance the CGP3 expansion. It represents not the industry's average cost, but the most competitive end of the global hard-rock lithium ore cost curve. Therefore, Greenbushes serves as a useful benchmark for observing the industry bottom. When lithium prices fall, high-cost capacity exits first, while low-cost capacity continues to produce. The closer prices move to Greenbushes' cost range, the fewer marginal units of capacity can sustain normal operations in the market, and the nearer supply exits are to completion. Greenbushes Has the Largest Production, but Limited Free-Float Volume Although Greenbushes has a very large production scale, relatively little of its concentrates can enter the spot market directly. Greenbushes is operated by Talison Lithium, whose shareholders include TLEA and Albemarle, with TLEA jointly held by Tianqi Lithium and IGO. The spodumene concentrates produced at the mine are primarily allocated under shareholder offtake arrangements, flowing to lithium chemical production lines within the shareholder systems of Tianqi, Albemarle, and others, and are not normally offered for direct sale to the market. Viewed through the framework of [Resources – Designed Capacity – Actual Production – Saleable Volume – Available Spot Volume], Greenbushes is a very typical case. Its actual production ranks among the world's largest, but since most of its concentrates are locked up within its shareholder system, the volume truly available for market-based transactions is relatively limited. This also means Greenbushes' influence on market prices is mostly indirect. On one hand, it defines the scale of global low-cost lithium resource supply, which has an important impact on the lithium chemical cost curve; on the other, its operating costs, offtake pricing, and expansion pace also serve as key references for long-term lithium ore contract negotiations and price assessments. By contrast, what really influences spot lithium ore prices in the short term are typically the marginal resources not fully locked up by shareholder offtake agreements and needing to find buyers on the market. These include some Australian mines, African lithium ore, and saleable cargo held by traders. Therefore, while the addition of approximately 500,000 mt of concentrate capacity at Greenbushes will alter medium and long-term supply-demand expectations, its short-term impact on the spot market may not be particularly pronounced. In contrast, the suspension or resumption of a marginal mine with an annual output of over 100,000 mt that primarily sells on the open market could rapidly influence spot quotes and market sentiment. It is well known that short-term prices are not entirely determined by total output; rather, they depend more on the volume of material freely available for trading in the market. For example, lithium carbonate's price elasticity hinges more on the current available volume in the market. The mine with the largest output does not necessarily hold the most direct pricing power in the spot market; what truly dictates short-term marginal prices are typically resources that are available, negotiable, and require immediate transaction. However, shareholder offtake does not mean such concentrates are completely isolated from the market. When smelters within the frameworks of shareholders like Tianqi and Albemarle reduce their operating rates, or when some smelting lines operate erratically, concentrates originally intended for internal consumption may indirectly enter the market through toll processing, resales, or inventory adjustments. These cargoes are usually not publicly tallied but affect the actual circulating volume in the lithium ore market. Their tracking requires assessment by combining shareholder smelter operating rates, concentrate inventory, toll processing arrangements, and import flows. In analyzing Australian ore supply, such shadow spot cargoes are often harder to observe than a mine's nominal production, yet can significantly influence the market during specific phases. SC6 and Lithium Chemicals: Transmission Direction Reversed Once Within a Year The price transmission relationship between Australian ore concentrates (SC6, CIF China) and China's lithium chemicals has completed a full round trip over the past year. In H1 2025, ore prices followed the downtrend. In Q1, Australian mines aggressively cut costs but did not reduce production, showing a strong willingness to sell. SC6 fell all the way to around $620/mt, and the lower concentrate prices, in turn, pressured lithium chemicals downward, forming a spiral. The market's concern at the time was: When would mines finally be willing to cut? The situation reversed starting at the end of Q3. The announcement of Yichun's plan to cancel 27 mining rights, along with the suspension at Jianxiawo, tightened expectations for domestic resource supply. Lithium chemical prices moved first, and SC6 followed with an uptrend that proved even more elastic—by December, the average price had already returned to around $1,300/mt. Formula pricing, linked to lithium chemical prices, allowed the mining side to capture the bulk of the upside gains, while the tolling margins of Chinese smelters were instead compressed. Meanwhile, the impairment and expansion adjustments at the Kwinana project reflect that lithium chemical conversion in Australia continues to face high hurdles in terms of cost control, production ramp-up, and operational stability. TLEA's Kwinana lithium hydroxide plant was fully impaired in mid-2025, with the second-phase construction halted, and IGO has clearly shifted its priority to mining. The role of Australian ore in the industry chain has been refixed as a supplier of concentrates, and the linkage between SC6 and Chinese lithium chemical prices will only tighten going forward, not decouple. The implied smelting margin—calculated by multiplying SC6 by the processing coefficient and comparing it to spot lithium chemical prices—has turned negative, meaning Chinese smelters using externally purchased ore are losing cash. Either ore prices must pull back or lithium chemical prices must rise; one of the two is inevitable. This indicator is the most powerful gauge of whether mines or lithium chemicals hold more pricing power. Australian Mine Production Resumptions: Price Breaks Through the Ceiling The key words for Australian ore in 2024-2025 were market exits, while in 2026 they have become revivals. Lithium prices have been climbing steadily since the beginning of the year, with futures prices once surpassing 200,000 yuan/mt, triggering a series of production resumptions in May and June: Project Action Timing Notes Bald Hill (MinRes) Resumed production after an 18-month shutdown Announced in May, first concentrates expected in Jul Restart cost approximately A$20 million Ngungaju Plant (PLS) Restart Planned for Jul Resuming roughly 200,000 mt/year Finniss (Core Lithium) FID approved, financing secured Targeting first ore in Q3 Financing approximately $205 million Kathleen Valley (Liontown) Evaluating expansion In progress — Mt Cattlin (Rio Tinto) Remains shut down From Mar 2025 to present Restart conditions not yet clarified Looking at these cases together, the real threshold for resuming production is more complex than simply having prices exceed cash costs. Bald Hill took only about two months from announcement to first ore because it had maintained a production-ready state throughout the shutdown, and MinRes's own mining services division could internally mobilize all operations—mining, crushing, and transport—without needing to wait for external contractors. Assets of this type are the quickest-responding supply when prices rise. Finniss, by contrast, was an entirely different situation: it first sold inventory to Glencore in exchange for liquidity, then cobbled together three financing instruments—convertible bonds, debt, and a share placement—before reaching FID. For mines with fragile balance sheets, resuming production is not an operational decision but a financing event; what low-price cycles destroy is not resources, but financing capacity. The market consequences of the resumption wave are already visible. Lithium carbonate hit a two-year high of 200,500 yuan/mt on May 13, then pulled back to the 160,000–170,000 yuan range in June, partly because the market saw resumption supply coming back. The logic is straightforward: when prices rise, idle capacity resumes production, supply expectations increase, and prices pull back. That list of idle capacity in Australia, when sorted, essentially forms the supply curve above lithium prices. The CGP3 fire and this wave of production resumptions are actually two sides of the same market: disruption to the incremental supply at the far left of the cost curve is bullish, while idle capacity at the right end accelerating its return is bearish. Looking at lithium prices this year from the resource perspective, equilibrium is being sought between these two forces. Lithium prices in 2026 are expected to fluctuate more frequently, but one-sided market moves will be shorter. After prices rise, what truly caps the height of the rally is the speed at which idle capacity re-enters the market. Projects under care and maintenance or on standby, such as Bald Hill, Finniss, and Ngungaju, essentially constitute elastic supply above lithium prices. When lithium prices return above the cash costs of these projects and stay there long enough, mines have the incentive to resume production. But production resumptions do not happen instantly. From the announcement of a restart to the rehiring of personnel, equipment maintenance, resumption of mining and processing, inventory buildup, and finally, the entry of concentrates into the market, it typically takes from two months to several quarters. This time lag is the window during which supply disruptions can drive prices higher. The suspension at Jianxiawo and the CGP3 fire at Greenbushes were able to affect market sentiment not because of a sudden global shortage of lithium resources, but because of a reduction in short-term available supply while idle capacity had yet to return. Compared to the previous cycle, it is worth noting that the window for risk premiums arising from resource-side disruptions is shortening. A growing number of mines are opting for care and maintenance rather than permanent closure; mining service companies, traders, and downstream enterprises are also participating in restart financing and offtake arrangements. As long as prices return above the break-even line, some idle capacity can resume more quickly. This means that in the future, lithium prices may still rise rapidly following supply disruptions, but the duration and height of one-sided market moves will be more easily constrained by production resumption expectations. Prices may not necessarily become more stable, but supply feedback could be faster. SMM New Energy Analyst Yang Le

SMM June 12 News: Metals market: As of the midday close, domestic base metals nearly all rose. SHFE copper rose 1.51%, SHFE tin rose 2.97%. SHFE nickel rose 0.94%. SHFE aluminum rose 1.06%. SHFE zinc rose 0.43%. SHFE lead fell 0.31%. In addition, casting aluminum linked futures rose 0.45%, alumina most-traded linked futures rose 1.45%. Lithium carbonate most-traded linked futures rose 3.85%. Silicon metal most-traded linked futures rose 0.63%. Polysilicon linked futures rose 5.91%. Ferrous metals all rose, iron ore rose 0.13%, rebar rose 0.66%, hot-rolled coil rose 0.74%, stainless steel rose 2.15%. Coking coal and coke: coking coal most-traded contract rose 3.02%, coke most-traded contract rose 5.63%. Overseas base metals: as of 11:38 AM, LME metals all rose. LME copper rose 1.01%, LME aluminum rose 0.54%, LME lead edged up. LME zinc rose 0.26%, LME tin rose 0.25%, LME nickel rose 0.67%. Precious metals: as of 11:38 AM, COMEX gold rose 2.63%, COMEX silver rose 5.36%. Domestic precious metals: SHFE gold most-traded linked futures rose 1.89%, SHFE silver most-traded linked futures rose 4.36%. Furthermore, as of the midday close, platinum most-traded linked futures rose 3.99%, palladium most-traded linked futures rose 5.69%. As of the midday close, the most-traded Europe container shipping futures contract fell 1.16% to 3,929.5 points. As of 11:38 AM on June 12, some futures midday quotes: Spot and fundamentals Copper: Today, Guangdong #1 copper cathode spot against the front-month contract: high-quality copper reported at 270 yuan/mt up 30 yuan/mt from the previous trading day, standard-quality copper reported at a premium of 210 yuan/mt up 30 yuan/mt, SX-EW copper reported at a premium of 150 yuan/mt up 30 yuan/mt. The average price of Guangdong #1 copper cathode was 104,715 yuan/mt up 1,090 yuan/mt from the previous trading day, and the average price of SX-EW copper was 104,625 yuan/mt up 1,075 yuan/mt. Spot market: Guangdong inventory has declined for 9 consecutive days and has now hit a new low for the year... Macro front China: [PBOC's open market operations net injected 178 billion yuan on the day, and net injected 885.8 billion yuan this week] PBOC conducted 393 billion yuan of 7-day reverse repo operations today, with 215 billion yuan of 7-day reverse repos maturing, resulting in a net injection of 178 billion yuan on the day. This week, PBOC conducted 1,112 billion yuan of 7-day reverse repo operations, with 226.2 billion yuan of 7-day reverse repos maturing, realizing a net injection of 885.8 billion yuan this week. (Jinshi Data APP) [Guangzhou: Fully Advance the Implementation of Major Projects Such as Intelligent Connected Vehicles and NEVs, Artificial Intelligence, Semiconductors and Integrated Circuits, and Low-Altitude Economy] The “Guangzhou Commerce Development 15th Five-Year Plan (Draft for Public Comments)” was released for public consultation. It highlighted the need to fully advance the implementation of major projects including intelligent connected vehicles and NEVs, ultra-high-definition video and new-type displays, green petrochemicals and new materials, intelligent equipment and robotics, artificial intelligence, semiconductors and integrated circuits, and low-altitude economy, and cultivate a group of leading intermediate product enterprises that are high-tech, manufacturing single champions, and specialized and sophisticated. Promote the accelerated development of intermediate product trade in foreign trade transformation and upgrading bases, and cultivate a number of well-known brands and “chain leader” enterprises. Support enterprises in using technologies such as the industrial internet, big data, and artificial intelligence for digital transformation, improving production efficiency and product quality, and driving the intermediate product trade to leap toward high-end and digital-intelligent development. (Jinshi Data APP) On the US dollar front: As of 11:38, the US dollar index rose 0.06% to 99.75. According to CME “FedWatch”: The probability that the US Fed will keep interest rates unchanged through June is 98.5%, and the probability of a cumulative 25bp rate cut is 1.5%. The probability that the US Fed will keep interest rates unchanged through July is 91.3%, the probability of a cumulative 25bp rate hike is 7.4%, and the probability of a cumulative 25bp rate cut is 1.4%. Market expectations for a US Fed rate hike have been pushed back from December this year to January next year, and the possibility of a rate hike this year is no longer fully priced in. (Jinshi Data APP) Amid sustained inflationary pressure driven by the Iran war, US producer prices in May rose at the fastest pace in more than three years. Data released by the Bureau of Labor Statistics on Thursday showed that the US PPI rose 6.5% YoY in May, the largest increase since November 2022, and rose 1.1% MoM. The core PPI, excluding food and energy, rose 4.9% YoY. The report highlighted the growing damage to the US economy from the energy price shock caused by the closure of the Strait of Hormuz. As the conflict is unlikely to be resolved in the short term, businesses are passing on higher energy and transportation costs, and other goods and services are also becoming more expensive. Combined with data earlier this week showing that consumer prices in May rose at the fastest pace in three years, Thursday's PPI report may further strengthen market expectations for a US Fed rate hike in 2026. As the labour market appears to be regaining growth momentum, the US Fed is shifting its focus to curbing inflation. On the data front: Today will see the release of Germany May CPI MoM Final, UK April Three-Month GDP MoM, UK April Manufacturing Production MoM, UK April Seasonally Adjusted Goods Trade Balance, UK April Industrial Production MoM, France May CPI MoM Final, US June 1-Year Inflation Expectations Prelim, and US June University of Michigan Consumer Sentiment Index Prelim. In addition, watch for: the Huawei Developer Conference on June 12-14; Elon Musk’s commercial space company SpaceX plans to list on the Nasdaq on June 12, 2026. Crude oil: As of 11:38, oil prices in both benchmarks fell, with WTI crude down 1.12% and Brent crude down 1.15%. The US and Iran may reach a preliminary agreement on a memorandum of understanding, causing oil prices to pull back slightly. According to CCTV, on June 11 local time, US President Trump posted on the social media platform “Truth Social” that, given that consultations with Iran had been submitted to the highest leadership of Iran and approved, he had canceled the strike and bombing operation originally planned for that night against Iran. According to the latest OPEC data, Iran’s crude oil production fell 19% last month, as the US blocked the country’s ports amid the ongoing conflict. Data from the monthly report released on Thursday showed that Iran’s daily output dropped by 546,000 barrels to 2.33 million barrels per day. Meanwhile, OPEC’s latest monthly report showed that the organization on Thursday lowered its 2026 global oil demand growth forecast to 970,000 barrels per day, marking its second consecutive downward revision. Since the outbreak of the Iran war, the producer group has believed that the conflict’s impact on consumption has been consistently smaller than that estimated by other forecasters such as the US Energy Information Administration and the International Energy Agency, both of which expect demand to decline in 2026. In addition, the report noted that the oil producer group raised its forecast for oil demand growth in 2027. (Jinshi Data APP) Spot Market at a Glance: ► ► ► ► ► ► ► ► ► ► ► ► ► ►

CMR Green Technologies, India’s largest non-ferrous metal recycler, is expected to make a strong stock market debut after its IPO was subscribed more than 127 times. The INR 6.31 billion (USD 66.3 million) offering attracted strong interest from institutional, non-institutional and retail investors, while grey market premiums indicate a potential listing gain of around 36%. CMR is a leading supplier of secondary aluminum products with an estimated 42-45% share of India’s automotive cast alloy market, serving customers including Maruti Suzuki, Honda Cars India, Bajaj Auto and Hero MotoCorp. The company operates 13 recycling facilities across India and produces recycled aluminum alloys, billets and other non-ferrous metal products. Growing demand from electric vehicles, recycling initiatives and decarbonization efforts is expected to support the company’s long-term growth outlook.