[SMM Analysis] Steel Export Review: Geopolitical Conflicts Trigger the Reshaping of the Export Landscape In terms of steel billet exports , the main target market in the first two months remained Indonesia. Part of the cargoes was imported by Chinese-funded or joint-venture rolling mills in Indonesia for further processing and use, thereby avoiding Southeast Asia’s import tariffs on finished steel products, while another part was supplied directly to local projects under construction. Meanwhile, Southeast Asia, Africa, and South America formed a solid base of exports. In particular, on the African side, Djibouti, as a core transshipment hub, had been handling a large volume of circulating resources. Turkey, meanwhile, saw a wave of concentrated external purchases due to delays in steel scrap vessel schedules and spot-futures price spread arbitrage. In terms of bar exports , the share to Hong Kong, China declined somewhat from the end of last year, while exports to Singapore overtook it. The main reason was that procurement in Singapore was rigidly driven by local public housing renewal and public infrastructure projects, such as the Greater Southern Waterfront, according to construction periods, with actual end-user consumption remaining relatively stable; whereas Hong Kong, China, as a capital and logistics transshipment hub, saw some earlier speculative re-export orders constrained by offshore exchange-rate fluctuations at the beginning of the year and funding borrowing costs. Traders proactively reduced some speculative exposure for financial risk hedging purposes, which led to a decline in transshipment procurement volume. Looking ahead to March , with the full blockade of the Strait of Hormuz, Iran’s semi-finished products export channels were effectively cut off. Chinese steel billet is expected to absorb these additional export orders arising from geopolitical conflict, and traders and steel mills will also accelerate shipments to markets outside China such as Southeast Asia to gain a larger replacement share. Therefore, total steel billet exports still have room to rise. By contrast, Chinese bar exports mainly rely on short-haul regional shipping routes into the inland areas within Asia, and were subject to extremely limited direct impact from the disruption of long-haul Middle East logistics. Therefore, March shipments are expected to remain stable, supported by rigid-demand restocking within the region. Source: SMM, General Administration of Customs Unlike the strong performance of billets, sheets & plates exports in the first two months were unsatisfactory. The cumulative exports of both cold galvanized and hot-rolled products in January and February declined YoY , with the drop in hot-rolled products being more pronounced. However, it should be noted that before the full suspension of navigation through the Strait of Hormuz at the end of February, logistics channels to the Middle East remained open, which secured a critical delivery window for sheets & plates. Therefore, in terms of HRC exports , Saudi Arabia still firmly ranked first among export destinations with a volume of 348,000 mt , mainly because its large-scale non-oil infrastructure and manufacturing projects in China were still in an intensive construction phase, with strong end-user steel demand, which also prompted local buyers to lock in relatively lower-priced Chinese HRC ahead of shipping disruptions, thereby maintaining its leading position. Pakistan (230,000 mt ), by contrast, saw this mainly due to bottlenecks in domestic supply, creating phased concentrated restocking demand, and according to the SMM survey, most purchases were made by downstream pipe factories. From the perspective of cold galvanized exports , the Southeast Asian market was currently in a stage of rapid development, and macroeconomic expansion had created a huge gap in flat steel products. Thailand in particular (304,000 mt ) was in a concentrated raw material stocking cycle for local downstream auto manufacturers at the beginning of this year, so just-in-time procurement by multiple physical manufacturers directly pushed up local imports. Looking ahead to March , under the dual impact of the Strait of Hormuz blockade and the Ramadan effect, sheets & plates exports to the Middle East core region are expected to face a sharp contraction. SMM shipping data showed that steel arrivals had already declined by more than 900,000 mt. However, under the pressure of elevated destocking in China, this portion of blocked exports is expected to be redirected to Southeast Asia and other alternative markets with “rigid manufacturing demand” for redistribution, thereby offsetting shipment reductions caused by localized logistics disruptions. Therefore, there is no need for excessive concern over total sheets & plates exports in March Source: SMM, General Administration of Customs Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Analysis] Freight Rates Surge, Making Deals Difficult for Steel Expor ters Affected by the US-Iran conflict, tight energy supply and sharply higher fuel costs, compounded by exchange rate fluctuations, have continuously pushed up China's export offers in recent days. Compared with the beginning of the month (March 6), SMM HRC prices have been raised by $9/mt; galvanizing prices rose by $11/mt; CRC rose by $5/mt; billet rose by $6/mt; and rebar rose by $6/mt. However, looking back at market transaction performance, deals weakened again recently. According to the SMM survey, ocean freight rates surged sharply, with current freight to the Middle East as high as $50-60. Most outside China clients remained on the sidelines; shipowners also refused to commit tonnage while waiting for the market to stabilize. For China exporters, there were offers but no market, making shipments difficult. Meanwhile, market sources said Hadeed, the GCC's only flat steel producer, raised its May hot-rolled coil (HRC) prices, still related to shipping restrictions in the Strait of Hormuz. HRC cargoes previously booked from China and other origins were also being redirected to the west coast, mainly heading to Jeddah Port, bringing high inland transportation costs. As for global steel prices, in India, in addition to rising raw material costs and rupee depreciation, a sudden LNG energy shortage further pushed up production costs, forcing steel mills to maintain a strong willingness to hold prices firm despite the traditional domestic off-season and blocked exports. In the Southeast Asian market, price increases were accepted entirely passively, mainly due to the rigid pass-through of high ocean freight rates by overseas suppliers. Although Southeast Asian buyers hesitated to take orders, they had no choice but to passively accept the increases against the backdrop of persistently high geopolitical logistics costs. At the same time, CIS export offers also rose significantly, benefiting from the intensifying geopolitical conflict in the Middle East and the resulting short-term global supply tightens. In the Middle East market, meanwhile, as war tensions continued to escalate, the closure of the Strait of Hormuz completely disrupted transportation, while freight rates and delivery uncertainty pushed the sheets & plates import markets in the UAE and Saudi Arabia into a complete standstill. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Hot Topic] Estimated “Cliff-Like” Drop in China’s Steel Exports—A Ramadan Pattern or a War Shock? As mentioned above, [Persian Gulf Shutdown? The Impact of the U.S.-Iran Conflict on Global Steel Trade] amid the US–Iran conflict, global steel trade was shaken and reshaped. Another topic that has recently been widely discussed in the market is: what impact will this war have on China’s total export volume? Before going into detail, it is important to remind everyone that the current focus has largely remained on geopolitical conflict, while often overlooking that this period coincides with Ramadan, a seasonal trough. Therefore, to quantify the war’s actual impact more accurately, SMM conducted corresponding “dehydration” adjustments based on ferrous panoramic shipping data. Most Direct Impact: A Deep Shortfall on the Shipping Side Data Source:SMM Ferrous Metal Shipping According to the table above, in the absence of war, during Ramadan 2025, China’s average weekly shipments to Gulf countries were about 327,000 mt, while the average weekly shipments in the month after Ramadan ended were 450,400 mt. Therefore, keeping average weekly shipments at around 300,000 mt during Ramadan is considered a “normal contraction” level. By further comparing the same-period data for 2026 and 2025, we can precisely calculate the quantified impact caused by the war. As of the latest date, in the first 20 days of Ramadan, China exported and shipped only 5,000 mt, with a weekly average of only 1,750 mt. Estimation logic: If there were no war, based on a neutral assessment using the 2025 Ramadan benchmark, total shipments in the first 20 days should have been about 930,000 mt; therefore, the war resulted in shipment losses of about 925,000 mt. Therefore, we can conclude that the more than 99% plunge on the shipping side was most likely caused by the war (route blockades, shipowners’ risk aversion), and the Ramadan factor is almost negligible in the face of such a massive decline. Delayed Effects on the Arrival Side Data Source: SMM Ferrous Metal Shipping In addition to the impact on the shipping side, SMM ’s ferrous panoramic shipping data also showed that after operations were suspended at multiple ports, a combination of factors—such as vessels being unable to berth and unload—led to a decline in the total volume of steel arriving at ports. As of the latest date, average weekly arrivals were about 220,200 mt, down by roughly 82,000 mt/week from 302,200 mt over the same period last year. Estimation logic: assuming no war impact and using a neutral assessment based on the 2025 Ramadan benchmark, cumulative arrivals in the first 20 days should have been about 863,400 mt, implying a cumulative shortfall of about 234,000 mt. Cause breakdown: it is expected that the decline on the arrivals side was not as pronounced as that on the shipments side, because among these 12 arriving vessels, most carried orders that had already been dispatched before the full outbreak of the war or in the early stage of the situation (Jan 25–Feb 25). Therefore, this 234,000 mt gap was mainly due to war-driven route detours (delays) and partial port shutdowns. Data Source: SMM Ferrous Metal Shipping In summary, based on the data, we can conclude that Ramadan was merely the “backdrop,” while the war was the “main cause.” If the impact were only from Ramadan, we should still have had about 300,000 mt of steel shipped to the Gulf each week. The reality, however, is that since Feb 18, our average weekly shipments have plunged to less than 2,000 mt. This means that, within the currently observed gap, shipment losses of more than 900,000 mt were entirely caused by war-related order stagnation or shipping lane disruptions. The 27% decline currently seen on the arrivals side is only the beginning; the real “vacuum period” will fully emerge in late March, during the latter part of Ramadan. At present, a phased contraction in China’s total steel exports to the Middle East has become a foregone conclusion. Does this mean the strong momentum of China’s full-year exports will come to a halt here? According to SMM steel export take-order data, last week, the total orders taken by 31 exporters were about 765,000 mt, up 20.76% MoM. Among them, export orders for long products were about 437,000 mt, up 56.07% MoM; export orders for sheets & plates were about 328,000 mt, down 7.21% MoM. Against the backdrop of rising export prices, this growth did not stem from a broad-based global economic recovery, but from forced shifts in trade flows driven by geopolitical conflicts. On the one hand, instability in Iran diverted Southeast Asian orders to China, driving a boom in steel billet exports; on the other hand, conflict in the Middle East pushed up shipping costs, and the surge in fuel prices directly caused physical disruptions along the trade chain. Even if there is overseas demand, the sharp rise in freight rates also weakened the pricing advantage of Chinese steel products. SMM Steel Export Orders Taken - 31 Companies (10kt) Data Source:SMM Weekly Steel Export Report Therefore, although the reduction in exports to the Middle East has already been confirmed by the data, assessing its impact on China’s total exports for the full year still needs to be based on a “global rebalancing” perspective: is the “gap” created after demand in Gulf countries is constrained being converted into “incremental volume” in other markets? What is the actual absorption capacity of these emerging incremental markets? Can they offset the monthly shipping loss of 900,000 mt from the Middle East? Please continue to follow SMM Steel Industry Research; we will regularly update global shipping developments… Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Analysis] Persian Gulf Shutdown? The Impact of the U.S.-Iran Conflict on Global Steel Trade On February 28, 2026, the conflict between the United States and Iran escalated into a full-scale outbreak, causing a sudden spike in Middle Eastern geopolitical tensions. As a global chokepoint for energy and bulk commodity maritime transport, the Strait of Hormuz has seen shipping disrupted and routes tightened, directly impacting the nerves of the global supply chain. This "Golden Waterway" is not only a lifeline for oil but also a critical strategic corridor for the global steel import and export trade . Once passage is restricted, it will deliver a comprehensive shock to the international steel trade landscape. Amidst the turmoil of war, what disruptions and restructuring will the global steel trade face? SMM's latest research provides an in-depth analysis. In the short term, the U.S.-Iran conflict poses a risk of stalling steel imports and exports in the Persian Gulf region, putting pressure on China's steel exports. Multiple disruptions along Gulf shipping routes have caused significant delays in exporters' orders. According to SMM research, the current Middle East situation has disrupted multiple ports in the Gulf region. Bahrain has suspended port activities, including pilotage services. Jebel Ali Port has halted all operations due to a fire caused by intercepting airstrike debris. Qatar's Ras Laffan and Messaid ports remain operational but with reduced traffic, GPS signal interference, and the government closure of its airspace. Similarly, new orders and shipments for Chinese exporters have also been significantly hindered. Data Source:SMM Impact Assessment of Core Ports within the Strait of Hormuz Should a physical blockade occur at this strategic chokepoint, the five most directly affected key inner-bay ports experiencing “instant logistics paralysis” would be: Port of Bandar Abbas, Port of Khomeini, Port of Jebel Ali, Port of Khalifa, and King Abdullah Port. Simultaneously, a Strait blockade would threaten to disrupt approximately 10% of global seaborne steel trade (primarily semi-finished products and specialty ores) . Iran's production of direct reduced iron (DRI) also holds significant weight in global supply; any disruption could drive up costs for electric arc furnace steelmaking in the Middle East. Data Source: SMM Ferrous Metal Shipping After the blockade, will goods become completely impossible to transport? While maritime routes will indeed come to a near standstill, the flow of goods won't cease entirely. It will simply become extremely costly, slow, and require complex overland transshipment. For instance, strategic alternative ports outside the strait include Sohar Port, Chabahar Port, and Gwadar Port. Data Source: Compiled by SMM based on publicly available information Trade Chokehold Triggered by Insurance Withdrawals Equally severe as the strait blockade is the withdrawal of war risk insurance. Marine insurers Skuld and Gard have announced they will cancel war risk coverage due to escalating tensions in the Middle East. Local feedback from the UAE indicates most insurers refuse to underwrite war risk insurance for the Red Sea. This means traders must bear multiple uncontrollable factors and assume all consequences, which will significantly impact new orders. Summary: The Hormuz Crisis's “Hedging Effect” on China's Steel Market Leads to Short-Term Export Pressure Short-Term Negative Impact (Suppression of Demand and Logistics): The sudden halt in Gulf shipping routes will cause China's total exports to Middle Eastern countries like Saudi Arabia and the UAE to plummet dramatically. Export disruptions may even force resources to flow back into the domestic market, intensifying supply pressure and exerting downward pressure on steel prices. Data Source: SMM, GACC Mid-term outlook: As a major steel supplier, Iran's halted exports will trigger tightening supply of steel billets in Southeast and South Asia. From Construction to Industry: Iran's Steel Export Structure Transformation and the Peak Era Dominated by “Billet” According to data released by the Iranian Steel Producers Association (ISPA), 2025 marked the “peak era” for Iran's steel exports, with its export structure exhibiting an extremely aggressive trend: ① Absolute Dominance of Semi-Finished Products: From March to December 2025, Iran's billet exports reached 4.58 million tons (+37.7% YoY), while slab exports hit 1.54 million tons (+44.6% YoY). This confirms the earlier observation that the current strait blockade will trigger significant “slab panic” among downstream steel mills in Southeast Asia and the Middle East. ② Structural Leap in Flat Products: Finished flat product exports surged from 307,000 tons in the same period last year to 1.03 million tons. Notably, the significant increase in hot-rolled coil (867,000 tons) and coated steel (up 76.7% YoY) indicates Iran's gradual transition from a “construction steel supplier” to an “industrial raw material supplier.” ③ Weakness and contraction in long products: In contrast, exports of finished long products (rebar, wire rod) declined by 9.9%, while structural steel exports plummeted by 27.7%. This trend of “reducing long products while increasing flat products” has, against the backdrop of stalled infrastructure projects, actually heightened the risk of inventory buildup for finished goods. Data Source: ISPA Mid-term positive factors: Cost and substitution support Iran's steel export shortfall of nearly 11 million tons will trigger regional supply tightness, forcing some Southeast Asian and South Asian buyers to shift procurement to China, creating “substitution-driven incremental demand.” Simultaneously, rising crude oil prices may push up costs across the entire industrial chain, providing bottom-up support for steel prices. Although logistics disruptions and project suspensions will suppress export performance in the short term, the reshuffling of the global supply landscape is expected to partially offset the negative impact. Chinese steel may play a key role in filling the global gap. Long-term outlook: Iran's ceasefire may temporarily impact the global steel market Hoarding effect under blockade: Iran's sharply rising mill and port inventory pressures According to the latest global steel statistics report released by the World Steel Association (WSA), Iran's cumulative crude steel production reached 31.8 million tons in 2025, marking a year-on-year increase of approximately 1.4% compared to 2024 and solidifying its position as the world's tenth-largest steel producer. In December 2025, Iran's monthly crude steel output hit 3 million tons, a significant year-on-year increase of 16.2%. This indicates that Iranian steel mills were operating at peak capacity just before the conflict erupted. In January 2026, its crude steel output reached approximately 2.6 million tons, marking a 15.1% year-on-year increase. Against the backdrop of a 6.5% year-on-year decline in global crude steel production during January, Iran demonstrated an “independent trend.” According to SMM research, the high production levels from earlier periods have led to severe inventory backlogs at domestic steel mills. The logistics blockade that began in late February prevented the full shipment of steel produced during this high-output phase out of the Persian Gulf. Consequently, ports and mill warehouses are now stockpiling large quantities of slabs and billets originally intended for export. Once the situation eases, this “low-priced inventory” could flood the market at dumping prices. However, considering Iran's post-ceasefire reconstruction needs and the actual release of these supplies, SMM will continue to monitor developments closely. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Analysis] Significant Accumulation of HRC in Ningbo After the Holiday, Slow Demand Recovery Drags on Transactions According to the SMM survey, in the first week after the holiday, the large-aperture inventory of SMM HRC in Ningbo was 492,000 mt (as of February 25), up 114,000 mt WoW from the week before the holiday. This week, HRC futures first rose and then fell, with spot prices falling by 10-30 yuan/mt WoW from the period before the holiday, and transaction performance was relatively poor during the week. As of the afternoon close on February 27, the most-traded HRC 2605 futures contract closed at 3,215 yuan/mt. Meanwhile, according to the SMM survey, in the Ningbo spot trading market this week, in terms of prices, as of the afternoon of February 27, spot offers closed at 3,230-3,240 yuan/mt, with prices falling by 10 yuan/mt WoW from February 13 during the week. In terms of transactions, the recovery pace of downstream procurement demand after the holiday fell short of expectations, with overall transactions being relatively poor. Even when futures rose mid-week, it was difficult to achieve transactions when spot prices followed the adjustment. In terms of arrivals, the shipping pace of mainstream resources was normal, with an increase in DDH arrivals, so the extent of inventory accumulation was slightly higher than expected. Looking ahead, with logistics returning to normal, inventories will gradually decline, but given the current slow recovery in demand, the decline is not expected to be overly optimistic, and it is anticipated to gradually expand over the next 2-3 weeks. This week, SMM released its weekly HRC balance data, showing an MoM increase in HRC production. This week, SMM statistics showed that the total social inventory of HRC in 86 warehouses (large sample) across the country was 5.3775 million mt, up 1.1404 million mt from the period before the holiday and up 31.57% YoY on the lunar calendar. By region, the markets with significant accumulation were in southern China, eastern China, and northern China. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Analysis] Holiday Stability in Overseas Prices, Divergent Trading Performance HRC prices in Thailand and Malaysia mostly held steady. As the holidays largely coincided with those in the domestic market and shipments were affected by the Chinese New Year, overall transaction activity remained relatively weak. The galvanizing market in Thailand performed moderately, but due to low-priced resources capturing market share, downstream shipments were somewhat impacted, leaving limited room for price increases. Influenced by factors such as Ramadan, HRC trading in Indonesia also trended toward mediocrity, while overseas export offers remained stable amid a wait-and-see stance. However, supported by government policies promoting increased use of domestically produced steel in the local shipbuilding industry, medium and long-term demand for sheets & plates in Indonesia is expected to remain relatively optimistic.The Black Sea market recently exhibited overall calm, with FOB offers for HRC exports pulling back slightly compared to pre-holiday levels. Although some routine transactions were concluded, overall market activity remained sluggish. Despite tight spot supply in the domestic Indian HRC market, it remains range-bound due to weak overall procurement demand, lacking momentum for price increases. Turkish HRC export offers have seen slight increases, following the price hike trend among European producers. European and US markets face strong policy and cost disruptions: although the US Supreme Court overturned some previously imposed tariffs by the president, the subsequent announcement of new global tariffs of up to 15% has sharply heightened market risk aversion. In European markets such as Italy, steel mills are leading ex-factory price increases against a backdrop of tight spot supply. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

[SMM Tin Futures Review: Post-Holiday Work Resumption Pace Remains Slow, the Most-Traded SHFE Tin Contract Fluctuates at Highs]

[SMM Analysis] Global Steel Market Weekly Review Issue 12 Steel prices moved down first then up last week, while export prices fluctuated rangebound. As of February 4, China's HRC FOB offers stood at $467/mt, and steel billet at $440/mt. Market transactions showed that order-taking momentum for steel billet improved compared to earlier periods, with traders preferring to secure downstream orders first before opportunistically sourcing from upstream suppliers. For sheets & plates, order intake remained robust over the past two weeks; however, following this week's price decline, traders' willingness to sell weakened. Some steel mills in north China faced scheduling pressure, and a few product varieties temporarily suspended offers. Overseas markets, Southeast Asia: Vietnam, in particular, is currently a region with robust demand, as accelerated infrastructure construction directly boosted construction steel prices. Capacity expansion by local leading enterprises such as Hoa Phat Group is altering the regional supply landscape and enhancing the competitiveness of domestic products. Meanwhile, the CFR transaction price for China-origin wide coil to Vietnam was referenced at $485-490/mt, up WoW from previous levels, mainly benefiting from pre-Chinese New Year local procurement demand release. Middle East market: Market sources indicated that billet exporters, after pausing due to political and internet restrictions, are gradually returning to the market, with KSC planning to tender large volumes of steel billet and slab. Recent exports of sheet & plate products from China to the Middle East also increased, with current HRC CFR prices around $500-505/mt. The demand center in the Middle East is shifting, as Saudi Arabia moves from pursuing landmark mega-projects toward more pragmatic logistics, mining, and industrial infrastructure, which could represent potential demand growth points for pipe materials. Copyright and Intellectual Property Statement: This report is independently created or compiled by SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"), and SMM legally enjoys complete copyright and related intellectual property rights. The copyright, trademark rights, domain name rights, commercial data information property rights, and other related intellectual property rights of all content contained in this report (including but not limited to information, articles, data, charts, pictures, audio, video, logos, advertisements, trademarks, trade names, domain names, layout designs, etc.) are owned or held by SMM or its related right holders. The above rights are strictly protected by relevant laws and regulations of the People's Republic of China, such as the Copyright Law of the People's Republic of China, the Trademark Law of the People's Republic of China, and the Anti-Unfair Competition Law of the People's Republic of China, as well as applicable international treaties. Without prior written authorization from SMM, no institution or individual may: 1. Use all or part of this report in any form (including but not limited to reprinting, modifying, selling, transferring, displaying, translating, compiling, disseminating); 2. Disclose the content of this report to any third party; 3. License or authorize any third party to use the content of this report; 4. For any unauthorized use, SMM will legally pursue the legal responsibilities of the infringer, demanding that they bear legal responsibilities including but not limited to contractual breach liability, returning unjust enrichment, and compensating for direct and indirect economic losses. Data Source Statement: (Except for publicly available information, other data in this report are derived from publicly available information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics, customs import and export data, various data published by major associations and institutions, etc.), market exchanges, and comprehensive analysis and reasonable inferences made by the research team based on SMM's internal database models. This information is for reference only and does not constitute decision-making advice. SMM reserves the final interpretation right of the terms in this statement and the right to adjust and modify the content of the statement according to actual circumstances.

Chinese steel futures rose first and then fell last week, and prices continued to pull back after this week's opening. Current normal HRC export offers are at $460-465/mt, with buyer bids around $445-450/mt. Overseas clients recently held an overall bearish view on the steel market, leading to moderate transaction performance through price reductions. As futures pulled back, market inquiries increased. In the Thai market this week, apart from HRC prices being lowered, most other mainstream imported resources held steady. Traders mainly adopted a wait-and-see approach, awaiting the announcement of ex-factory price policies from mainstream steel mills. It is noteworthy that recent frequent overseas anti-dumping and anti-circumvention investigations mostly involve cold-rolled products and HRC. According to an SMM survey, Thailand has now initiated an anti-circumvention investigation on wide coil. Following Vietnam's wide coil anti-circumvention case, this marks a further strengthening of trade barriers in the Southeast Asian market, and China's subsequent HRC exports are expected to face increased difficulty.

According to SMM's assessment, China's antimony ingot (including antimony ingot, crude antimony conversion, antimony cathode, etc.) production in May 2025 increased by approximately 4.2% MoM compared to the previous month. In detail, among the 33 surveyed producers currently assessed by SMM, 11 producers halted production, an increase of 3 from the previous month; 19 producers experienced production cuts, a decrease of 2 from the previous month; and 3 producers maintained relatively normal production levels, a decrease of 1 from the previous month. From the perspective of antimony ingot production, antimony production in May slightly increased again after a significant decline in April, which many market participants considered a normal phenomenon. The recent volatile market prices also contributed to the high elasticity of market production. Currently, many overseas ore sources are still unable to enter the domestic market, and market participants indicated that the overall domestic raw material supply remains tight. However, with the correction of antimony market prices, the shipping sentiment of antimony ore suppliers has begun to strengthen. Nevertheless, as many producers announced production halts and cuts from late May to early June, market participants anticipate that China's national antimony ingot production in June 2025 is likely to experience a significant decline compared to May. Note: Since May 2022, SMM has been publishing its assessed production of SMM national antimony ingot (including antimony ingot, crude antimony conversion, antimony cathode, etc.). Benefiting from SMM's high coverage rate in the antimony industry, SMM surveyed a total of 33 antimony ingot producers distributed across 8 provinces nationwide, with a total sample capacity exceeding 20,000 mt and a total capacity coverage rate of over 99%. This report is an original and/or compiled work of SMM Information & Technology Co., Ltd. (hereinafter referred to as "SMM"). SMM legally holds the copyright and is protected by the "Copyright Law of the People's Republic of China" and other relevant laws, regulations, and applicable international treaties. Without written permission, it is prohibited to reprint, modify, sell, transfer, display, translate, compile, disseminate, or disclose the above content to any third party in any form or permit any third party to use it. Otherwise, once discovered, SMM will pursue legal liability for infringement, including but not limited to requiring the assumption of contractual liability for breach, returning unjust enrichment, and compensating for direct and indirect economic losses. The content contained in this report, including but not limited to information, articles, data, charts, images, sounds, videos, logos, advertisements, trademarks, trade names, domain names, layout designs, and any or all other information, is protected by the "Copyright Law of the People's Republic of China", the "Trademark Law of the People's Republic of China", the "Anti-Unfair Competition Law of the People's Republic of China", and other relevant laws, regulations, and applicable international treaties concerning copyright, trademark rights, domain name rights, commercial data information property rights, and other rights. It is owned or held by SMM and its relevant right holders. Without written permission, no institution or individual may reprint, modify, use, sell, transfer, display, translate, compile, disseminate, or disclose the aforementioned content to any third party in any other form, or permit any third party to use it. Otherwise, once discovered, SMM will pursue legal action to hold the infringing party liable, including but not limited to demanding compensation for breach of contract, returning unjust enrichment, and compensating for direct and indirect economic losses. *All data in this report is based on publicly available market information (including but not limited to industry news, seminars, exhibitions, corporate financial reports, brokerage reports, data from the National Bureau of Statistics (NBS), customs import and export data, and various data published by major associations and institutions), and relies on SMM's internal database models. It is internally processed and reasonably inferred by the SMM research team. The information provided in this report is for reference only, and risks are borne by the user. This report does not constitute direct advice for investment research and decision-making. Clients should make decisions cautiously and should not use this as a replacement for their own independent judgment. Any decisions made by clients are unrelated to SMM. In addition, SMM is not responsible for any losses or liabilities arising from unauthorized or illegal use of the viewpoints expressed in this report. SMM reserves the right to modify and ultimately interpret the terms of this statement.