China’s NPI prices have remained firm despite falling production costs because freely available inventories have tightened. FeNi, meanwhile, has followed lower benchmark nickel prices and faced competition from cheaper refined nickel, compressing its premium over NPI. The divergence could reverse as Chinese output rises and Indonesian producers switch capacity back to NPI.

SMM Weekly Stainless Steel Futures Review — week of July 13–17, 2026. Cooling US inflation and tight Indonesian nickel ore supply push the benchmark contract up RMB 450/mt in the week.

Steel Authority of India Limited (SAIL) and Indonesia's PT Krakatau Steel have signed a joint venture agreement to establish a stainless steel slab plant in Indonesia with an annual production capacity of 500,000 tonnes. The project aims to strengthen industrial cooperation between the two companies and support the development of stainless steel production in Indonesia, with the planned facility focused on manufacturing stainless steel slabs for further processing and downstream applications. The partnership marks a significant step in expanding regional stainless steel manufacturing capabilities and reflects growing India-Indonesia collaboration in the steel sector.

I. Key Points In H1 2026, nickel prices exhibited wide fluctuations characterized by a “rebound from lows—consolidation at highs—pullback and consolidation” pattern. The most-traded LME nickel contract surged from $14,000/mt at the beginning of the year to near $20,000 in May, before pulling back to $16,000-17,000 in July; the most-traded SHFE nickel contract climbed from 110,000 yuan/mt to above 150,000 yuan/mt, and then retreated to 125,000-130,000 yuan/mt. The driving logic of this market move was the intertwined resonance of three main themes: a shift in Indonesia’s resource policies, repeated fluctuations in global macro liquidity expectations, and the impact of geopolitical conflicts on raw material costs. The center of nickel prices did rise compared to 2025, but the “shadow of surplus” has not dissipated. In H2 2026, the key variables for tracking nickel prices are as follows: First, the approval results of Indonesia’s RKAB quota revision in July. A significant increase in the quota would substantially narrow the supply deficit and weigh on nickel prices. Second, the Fed’s policy path — whether the hawkish signal from the June dot plot will persist — which affects the US dollar index and the valuation center of commodities. Third, sulphur supply and the situation in the Strait of Hormuz, which determines the cost support strength along the MHP–nickel sulphate–refined nickel chain. Fourth, demand from stainless steel and NEV ternary power batteries. Fifth, the pace of global visible inventory destocking. Sustained destocking would serve as a real support signal, while high inventories would limit price elasticity. Under a neutral scenario, LME nickel prices are expected to trade in the range of $15,500-17,500/mt in H2. II. Macro Environment – Reversal of Liquidity Expectations, Substantial Impact of Geopolitical Costs, and the ‘Dual Strength’ Pattern of the RMB 1. Fed Policy Path: ‘From Dovish to Hawkish’ At the beginning of the year, the market widely expected 50-100 bp of rate cuts in H1 2026, and the US dollar index fell below 97 at one point, creating a relatively loose liquidity environment. However, mid-year, new Fed Chair Kevin Warsh’s hawkish stance surprised the market. The June meeting kept rates unchanged and the dot plot signaled a bias toward rate hikes, leading to a systematic revision of the previously priced “dovish delivery” logic. This directly weighed on the valuation of industrial metals such as nickel, serving as a key macro trigger for the nickel price decline in June. 2. Geopolitical Conflicts Expanded from ‘Safe-Haven Trades’ to ‘Real Cost Shocks’ The Middle East situation (tensions among the US, Israel and Iran, and disturbances in the Strait of Hormuz) not only pushed up energy and safe-haven premiums, but also, through the critical link of sulphur supply, directly raised the production cost of Indonesia’s MHP (each mt of MHP in metal content consumes about 10 mt of sulphur), forming the core driver of the pulse-like surge in nickel prices in May. After a ceasefire agreement was reached between the US and Iran in mid-June, energy and safe-haven premiums receded, leading to a peak and subsequent pullback in commodities, confirming the dual impact of geopolitical variables on nickel prices. 3. China’s Macroeconomy and RMB ‘Dual Strength’ Provide a Unique Offset Against a generally stronger US dollar, the onshore RMB bucked the trend, appreciating from 6.98 to 6.79 (a gain of about 2.9%). The relative strength of the RMB, with the exchange rate declining (USD/CNY fell), caused import costs to drop sharply, opening the import window and generating arbitrage profits. However, as large volumes of imported nickel flowed into the domestic market, the spot supply of nickel plates in China increased, accelerating the pace of inventory buildup and weighing on domestic prices. At the same time, LME nickel inventories decreased, leading to a repair of the SHFE/LME nickel price ratio, and the import window closed again in May. III. Indonesia's Industrial Policy—Systemic Transformation from "Expanding Capacity" to "Controlling the Chain to Raise Prices" In H1 2026, Indonesia's nickel industry policy completed a strategic shift, systematically deploying a policy package centered on "controlling supply, stabilizing prices, and enhancing resource added value," which became the core fundamental variable driving wide fluctuations in nickel prices. 1. Significant tightening of total RKAB quotas and tilted allocation structure At the beginning of the year, Indonesia's ESDM announced that the 2026 nickel ore quota would be drastically cut from 379 million wmt in 2025 to 270 million wmt. The world's largest single nickel mine project, WBN, saw its 2026 quota suffer a "cliff-like" reduction; its quota was exhausted in May, leading to full-scale production cuts and shutdowns, stoking persistent concerns over tight supply in H1. The Indonesian authorities have clarified that July 1 to 31, 2026 will be the mid-year application period for supplementary RKAB quotas, prioritizing compliant miners with integrated domestic downstream smelting capacity (such as supporting NPI or HPAL projects). The mid-year policy game over RKAB quotas is intensifying. 2. HPM pricing formula reform shifts from single nickel pricing to multi-element comprehensive pricing The new formula effective April 15 incorporates associated elements such as iron, cobalt, and chromium into the value component for the first time. Indonesia sought to recapture the undervalued value of associated resources into the pricing system, raising benchmark prices for nickel ore and intermediate products across the cost side. However, this reform met strong opposition from the domestic smelting industry, which argued that it would further squeeze smelting profits amid already surging sulfur and energy costs. 3. Indonesian government officially releases new export control regulations for ferronickel (FeNi) and NPI In July, Indonesia further strengthened export supervision of high-value-added nickel products under Finance Minister Regulation (KMK) No.32/MK/BC/2026 (implementing Trade Minister Regulation No.17/2026). The new regulation targets products under HS Code Ex.7202.60.00, including ferronickel (FeNi) ingots and lumps with nickel content ≥8%, sponge ferronickel (Sponge FeNi) and granular ferronickel (Nugget FeNi) with nickel content ≥4%, as well as low-grade ferronickel products with 2% ≤ Ni <4% and iron content ≥75% (covering some NPI products). Export requires a surveyor's report (LS) and relevant export licenses; from January 1, 2027, export will generally only be allowed through state-owned export enterprises (BUMN Ekspor), with exemptions under specific circumstances. Overall, Indonesia is currently tightening quotas, raising taxes and fees, and imposing export controls to elevate resource value, seeking to keep nickel prices within its officially recognized desired range ($19,000-20,000/mt) over the long term. On the other hand, it must balance stability of the industry chain and foreign investor confidence in actual implementation, thus exhibiting a game-like characteristic of "tight first then loose, adjusting while implementing."The extreme policy uncertainty was one of the core reasons behind the wide fluctuations in nickel prices in H1. IV. Changes in Nickel Intermediate Product Raw Materials: Restructuring of the Cost Transmission Chain 1. MHP and High-Grade Nickel Matte: A Dynamic Game Dominated by "Auxiliary Material Costs" There are three main production routes for nickel sulphate raw materials: MHP (hydrometallurgy): the dominant route with the largest long-term growth, but highly dependent on sulphur; high-grade nickel matte (pyrometallurgy RKEF conversion / oxygen-enriched side-blowing route): an alternative route with low dependence on sulphur and relatively stable cost elasticity; nickel briquette dissolution: the least economical, feasible only within specific price spread windows. The sharp fluctuations in sulphur prices in H1 reshaped the cost structure of the entire nickel industry chain. Producing one mt in metal content of MHP requires approximately 10 mt of sulphur, while tensions in the Strait of Hormuz disrupted Indonesia’s sulphur import channels, forcing Huayou Cobalt’s Huafei Nickel-Cobalt to cut production on some lines starting in May. Sulphur prices surged, with the SMM sulphur CIF Indonesia price peaking at $1,300/mt, and the cost shock was transmitted step by step along the “sulphur—MHP—nickel sulphate—electrodeposited nickel” chain, becoming one of the core drivers behind the rapid nickel price rise in May. The high-grade nickel matte route, relying on pyrometallurgy, is far less dependent on sulphur than MHP. Consequently, during the sulphur price spike, high-grade nickel matte’s cost advantage over MHP widened significantly, creating direct substitution pressure on MHP’s market share. In terms of production trends, Indonesia’s MHP production edged up about 0.02% YoY to 206,000 mt in metal content in January-June 2026. Over the same period, high-grade nickel matte posted the most impressive growth, with production up about 123% YoY to 185,000 mt in metal content, strengthening its position in the competition for nickel sulphate raw materials. In the medium and long term, however, once sulphur supply normalizes and MHP costs pull back, the MHP route, with its scale effects and relatively mature cost curve, will reclaim its dominant share of the nickel sulphate raw material market; after all, MHP projects’ capacity base is far larger than that of high-grade nickel matte, and its cobalt by-product also provides a substantial marginal revenue contribution (about $4,500/mt Ni). 2. Production Capacity Switching Game Between High-Grade Nickel Matte and NPI High-grade nickel matte and NPI share the same RKEF production lines and laterite nickel ore resources, differing only in whether a sulphidation conversion stage is added at the end. The conversion decision is essentially a profit-maximization problem: when the marginal revenue of high-grade nickel matte relative to NPI covers the additional equipment and process losses of sulphidation conversion, lines switch to high-grade nickel matte; otherwise, they tend toward NPI. The conversion profit chart shows that profit for NPI-to-high-grade-nickel-matte conversion appeared only in April-May. After MHP production cuts in May, the monthly nickel sulphate raw material deficit was about 8,000 mt Ni, theoretically requiring increased high-grade nickel matte production to fill. However, due to RKAB quota constraints and the continued decline in NPI feed grade, integrated enterprises prioritized supplying stainless steel, making it difficult for high-grade nickel matte to offset the MHP raw material shortfall. This was a key reason why nickel sulphate prices remained firm even after refined nickel prices fell sharply in May. 5. Refined Nickel Supply-Demand Pattern: High Inventory vs. Structural Tightness Expectations 1. Supply Side: Electrodeposited Nickel Capacity Continues to Expand, Production Hits Repeated Records The most certain trend on the supply side is the sustained release of electrodeposited nickel capacity and production in China and Indonesia. According to SMM data, from January to June 2026, China’s refined nickel production was 215,000 mt, a YoY growth rate of 9%; Indonesia’s refined nickel production was 56,000 mt, a YoY growth rate of 97%. Meanwhile, at the beginning of 2026, China’s refined nickel trade pattern underwent a temporary reversal. Previously, benefiting from the explosion in electrodeposited nickel capacity, China had once been expanding its net exports of refined nickel. However, entering Q1 2026, as the price spread between Chinese and overseas markets opened up and the import arbitrage window was activated, China turned back into a net importer of refined nickel, with net imports exceeding 80,000 mt in January-April. 2. Demand Side: New Energy Recovery, Stainless Steel Support, and Steady Alloy & Special Steel In H1 2026, stainless steel, the largest downstream application of nickel, maintained mild growth. Total stainless steel production in China and Indonesia from January to June was approximately 23 million mt, up about 2% YoY. Steel mills maintained relatively high operating rates throughout H1, with stable apparent consumption. In the new energy (ternary battery) sector, nickel demand saw a strong recovery. From January to June, China’s ternary cathode precursor production was 528,000 mt, up 32% YoY; ternary cathode material production was 493,000 mt, up 40% YoY. Alloy & special steel and electroplating, although accounting for a relatively low share of total primary nickel consumption, played a critical role in refined nickel demand in H1 due to their irreplaceability. From January to June, China’s total refined nickel demand was approximately 140,000 mt, up 9% YoY. Military and aerospace demand strengthened, while high-end manufacturing demand remained steady with moderate growth. 3. Inventory Side: Global Visible Inventory Remains at Historical Highs Despite wild swings in nickel prices in H1, global visible nickel inventory remained at relatively high historical levels. LME nickel inventory fluctuated in the range of 270,000-280,000 mt for an extended period. China’s social inventory and exchange warrants experienced significant buildup. As of July, SMM refined nickel social inventory reached 130,000 mt, with total global inventory hitting a high of 497,000 mt. High visible inventory posed a significant constraint on nickel price rises. In June, after digesting supply disruption narratives, the market refocused on the fundamental reality of “high inventory and lackluster demand,” and nickel prices pulled back from a temporary high to around $16,100/mt. 6. H2 2026 Risk Alerts and Nickel Price Forecasts Based on the logic of H1, nickel price trends in H2 are expected to maintain a fundamental pattern dominated by policy gaming, with macro factors amplifying volatility. The following variables merit close monitoring: 1. The final outcome of the RKAB quota revision approval in Indonesia in July; 2. whether the US Fed's policy path in H2 will continue its hawkish stance; 3. whether sulfur supply can substantially return to normal, and whether there is a risk of repeated disruptions in the Strait of Hormuz situation; 4. whether end-use demand from stainless steel and new energy sectors can show a substantial improvement; 5. the destocking pace of global visible inventory. Based on the above price influencing factors, a scenario analysis for nickel prices is conducted: Bearish scenario (quotas being more accommodative than expected): quota increase ≥30% + sulfur pullback + high inventory pressure → LME nickel $14,000—$16,000/mt. Neutral scenario (highest probability): quota slightly increased but still tight + sulfur consolidates at highs → LME nickel $15,500—$17,500/mt. Bullish scenario (tight quotas + secondary cost surge): quotas continue to tighten + export controls + repeated geopolitical tensions push up sulfur → LME nickel $17,000—$19,000/mt.

[SMM Analysis] Stainless Steel Costs and Prices Pull Back in Tandem, Steel Mill Profits Remain Basically Stable This week, stainless steel prices and production costs fell together, and steel mill profit margins remained basically stable. Based on 304 cold-rolled as the benchmark, the profit margin calculated with current raw materials was 2.07%, while that using inventory raw materials was 1.33%. Nickel-based raw material cost side, high-grade NPI prices showed a pullback trend this week. During the week, SHFE nickel and SS futures were in the doldrums overall. Although there were widespread expectations of tight supply for high-grade NPI and upstream smelters and traders maintained firm offers, stainless steel mills' production schedule expectations pulled back, leading to weaker demand, and coupled with the simultaneous decline in stainless steel prices, the industry's acceptance of high-priced supply was very limited, and market transactions remained sluggish. As of this Friday, high-grade NPI with mainstream grade of 10%-12% fell by 8 yuan per nickel unit, closing at 1,133 yuan per nickel unit. Stainless steel scrap market, stainless steel scrap prices pulled back slightly this week. The weak futures market transmitted downward to spot cargo, and combined with sluggish off-season demand and reduced steel mill production schedules, rigid demand weakened further. Although steel scrap had an economic advantage over NPI, providing floor support for prices, uncertainty over Indonesian policies kept the market in a wait-and-see stance. Under the weight of bearish fundamentals, short-term stainless steel scrap prices are expected to continue to be in the doldrums. As of this Friday, the mainstream 304 off-cuts price in the Shanghai region fell by 100 yuan/mt, with the latest quotation at approximately 10,400 yuan/mt. Chromium-based raw material cost side, high-carbon ferrochrome prices continued to edge down this week. High-carbon ferrochrome production remained high...

[SMM Analysis] Finished Product Prices Fall in Tandem, Stainless Steel Mill Profits Slightly Compressed This week, stainless steel prices and production costs declined in tandem, with steel mill profit margins narrowing slightly. Using 304 cold-rolling as the assessment basis, the profit margin calculated with current raw material costs stood at 2.28%, while that based on inventory raw materials was 2.1%. On the nickel-based raw material cost side, high-grade NPI prices showed a downward pullback this week. Affected by weakening SHFE nickel and SS futures, coupled with disturbances from Indonesian nickel ore news, although NPI producers and traders maintained a strong willingness to hold prices firm, expectations of off-season maintenance and production cuts at stainless steel mills and the pullback in stainless steel prices led to low acceptance of high-priced raw materials, driving high-grade NPI prices to decline and pull back. As of this Friday, high-grade NPI with a mainstream grade of 10%-12% fell by 8.5 yuan per nickel unit, closing at 1,141 yuan per nickel unit. In the stainless steel scrap market, prices fell in tandem this week. SS futures pulled back and stainless steel finished product prices declined, dragging down stainless steel scrap. Currently in the traditional consumption off-season, end-use demand is weak, and expectations of lower steel scrap demand due to mill production cuts and maintenance, along with bearish macro sentiment, led to more cautious purchasing attitudes. Although stainless steel scrap holds an economic advantage over NPI and finds some bottom support, it is struggling to withstand the combined weight of multiple bearish factors, and the short-term market remains under pressure. As of this Friday, mainstream 304 off-cuts in Shanghai fell by 50 yuan/mt, with the latest quotation at approximately 10,500 yuan/mt. On the chrome-based raw material cost side, high-carbon ferrochrome prices continued to edge down this week. This week, TISCO and Tsingshan successively...