The operating rate of major copper cathode rod enterprises in China stood at 81.51% last week (March 13–March 19), marking the fourth consecutive week of MoM improvement since the Chinese New Year, with industry sentiment continuing to recover. The strong rebound in the operating rate in this round was mainly driven by two factors: first, the relatively weak operating rates of secondary copper rod enterprises, coupled with the price difference between copper cathode and copper scrap remaining at a relatively low level, significantly weakened the substitution effect between copper cathode and copper scrap, leaving more market room for copper cathode rod; second, improving orders for downstream wire and cable and enamelled wire boosted a faster drawdown in enterprises' finished product inventories. As copper prices broke above low-level support, downstream procurement sentiment continued to heat up, and new orders for copper cathode rod enterprises showed a pattern of concentrated volume release. Most enterprises reported that their production pace could no longer keep up with shipment progress, and some had already begun to proactively control the pace of taking orders to ensure contract fulfillment. From the downstream industry perspective, wire and cable as well as enamelled wire enterprises also benefited from the pullback in copper prices, with operating rates steadily rebounding, further boosting demand for copper rod. Inventory side, although the pullback in copper prices boosted enterprises' willingness to restock, constrained by limited room for capacity release, enterprises did not excessively stockpile on dips and mostly maintained normal production raw material reserves. Meanwhile, due to continued downstream pick-up of goods, enterprises' capacity was unable to fully match order demand, accelerating the drawdown of finished product inventories. Enterprises Raise Processing Fees and Increase Margin Requirements to Control Risks After copper prices pulled back sharply, downstream purchase willingness increased significantly, and order concentration rose markedly. To reasonably control the pace of taking orders, some enterprises urgently raised processing fees. At the same time, affected by the increased uncertainty in the pace of cargo pick-up caused by concentrated downstream order placement, as well as the continued decline in copper prices, enterprises became more concerned about the default risk of earlier high-priced orders, and some enterprises simultaneously increased margin ratios to strengthen risk control. Looking ahead, with copper prices rising at present, downstream procurement sentiment has clearly weakened. To ensure stable deliveries, copper cathode rod enterprises are expected to maintain relatively high operating loads. Although rigid demand is gradually being fully released, against the backdrop of low finished product inventories, enterprises will still maintain high operating rates to replenish inventory. Accordingly, SMM expects the operating rate of China's copper cathode rod enterprises to fluctuate at highs in March.
Mar 25, 2026 15:22[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.
Mar 25, 2026 09:12[SMM Morning Zinc Briefing: Stronger US Dollar Index Put LME Zinc Under Pressure and Slightly Lower]: Overnight, LME zinc opened at $3,095/mt. After the opening, LME zinc fluctuated downward along the daily average line, hitting an intraday high of $3,097/mt. Near the close, LME zinc fell to a low of $3,027/mt, and finally closed down at $3,038.5/mt, down $64.5/mt, a decline of 2.08%, while trading volume decreased to 11,298 lots...
Mar 25, 2026 08:51[SMM Cast Aluminum Alloy Morning Comment: Aluminum Prices Halted Their Decline, but Wait-and-See Sentiment Remained Unchanged; Rangebound Movement May Continue in the Short Term] Spot market, yesterday the overall ADC12 market continued to hold prices steady. Aluminum prices showed signs of halting their decline, but market sentiment recovered only limitedly, and enterprises generally chose to postpone price adjustments and mainly adopt a wait-and-see stance. Demand side, downstream orders did not improve significantly, and just-in-time procurement remained the main approach, with mediocre transaction performance. Against the backdrop of easing cost-side fluctuations and insufficient demand support, ADC12 prices may continue to fluctuate within a range and remain relatively stable in the short term, with relatively limited momentum for price adjustments. Further attention should still be paid to aluminum price trends and the recovery of end-use demand.
Mar 25, 2026 09:03SMM News, March 25: In early trading, SHFE aluminum 2604 fluctuated downward, but was slightly higher than the previous trading day. Overall market buying sentiment was good, and sellers held prices firm as aluminum prices remained at relatively low levels. Later in the morning, SHFE aluminum 2604 fluctuated upward, with its center running higher than the previous trading day. Some sellers still did not quote prices, while some showed a notably stronger willingness to hold prices firm. Overall market buying sentiment was good. Today’s mainstream transaction prices were concentrated around the average price of the SHFE aluminum 04 contract to a premium of 10 yuan/mt. Today, the east China market shipment sentiment index was 2.64, up 0.01 WoW; the purchasing sentiment index was 2.42, up 0.02 WoW. Today, aluminum prices stopped falling and rebounded. Affected by the fear of further declines over the previous two days, traders and downstream processing enterprises in central China showed slightly improved buying sentiment today from the previous day, but overall transactions had not yet returned to a fully active state, and buyers tended to purchase at wider discounts. Ultimately, actual transaction prices in the central China market ranged from a discount of 20 yuan to a premium of 10 yuan against the central China price. Today, the central China market shipment sentiment index was 2.64, up 0.01 WoW; the purchasing sentiment index was 2.42, up 0.02 WoW. Inventory side, aluminum ingot inventory in major consumption regions increased by 4,000 mt from the previous period today, with Guangdong being the main source of destocking. In the short term, aluminum ingot continued its post-Chinese New Year seasonal inventory buildup. Supported by bullish sentiment, premiums are expected to remain on a narrowing trend.
Mar 25, 2026 13:59SMM Morning Meeting Summary: Overnight, LME copper opened at $12,016.5/mt. After dipping to $11,955.5/mt in early trading, its center rose sharply to a high of $12,160/mt, and then continued to hover at highs, finally closing at $12,092.5/mt, down 1.05%. Trading volume reached 23,000 lots, open interest stood at 293,000 lots, up 406 lots from the previous trading day, mainly reflecting increased short positions overall. Overnight, the most-traded SHFE copper 2605 contract opened at 93,600 yuan/mt and touched a low of 93,480 yuan/mt at the open. Its center then moved higher to a high of 94,990 yuan/mt, after which copper prices maintained a fluctuating trend at highs, finally closing at 94,670 yuan/mt, up 0.17%. Trading volume reached 51,000 lots, open interest stood at 198,000 lots, down 533 lots from the previous trading day, mainly reflecting reduced short positions throughout the day.
Mar 25, 2026 09:13Dear Valued Client, To keep pace with the rapid development of the secondary copper industry and meet the market's need for in-depth analysis of the recycling industry and the supply-demand pattern of copper cathode, our company has conducted a deep optimization of our data models. We are now systematically upgrading and adjusting the standards and content of monthly supply-demand balance data related to China's copper scrap, with the following treatment applied to historical data: I. Adjustments Made The following data points have been newly launched: "Copper Scrap New and Old Scrap Production: Domestic Old Scrap: Annual", "Copper Scrap New and Old Scrap Production: Domestic New Scrap: Annual", "Copper Scrap New and Old Scrap Production: Domestic Copper Scrap: Annual", "Copper Scrap New and Old Scrap Production: Domestic Old Scrap - Forecast: Annual", "Copper Scrap New and Old Scrap Production: Domestic New Scrap - Forecast: Annual", and "Copper Scrap New and Old Scrap Production: Domestic Copper Scrap - Forecast: Annual"—a total of six new data points. (Access path for new data: Database - Copper - Copper Scrap - Production - Domestic Copper Scrap Production) II. Historical Data Processing The following four historical data series will cease to be updated starting from December 2025: "Domestic Copper Scrap Supply (Metal Content), ID: a10031747", "SMM Domestic Copper Scrap Supply: YoY, ID: a10031748", "Domestic Copper Scrap Supply (Metal Content) - Forecast, ID: a12731971", and "SMM Domestic Copper Scrap Supply YoY - Forecast, ID: a12731972". Going forward, the new standards will be uniformly applied for data releases, with the revised data traceable back to 2020. Should you have any questions, please feel free to contact the SMM customer service team at any time. Thank you for your continued support and trust! III. Effective Date February 1, 2026 SMM Information & Technology Co., Ltd. SMM Copper Research Team Liang Kaihui, 86-21-5159-5826 January 22, 2026
DataJan 22, 2026 15:31With the development of the scrap metal industry, companies are paying increasing attention to scrap aluminum varieties and price points. To meet market demands and provide more comprehensive spot price information, SMM, after extensive market research and preliminary communication, plans to launch an optimized Malaysian scrap aluminum price point on October 13, 2025: - Tense Scrap Malaysia (Mixed Aluminium Castings) Introduction to the new SMM Malaysian scrap aluminum price points: SMM, taking into account the import-export and local demand characteristics of Malaysian end-users across different application scenarios, and based on overseas policies and market changes, has revised the Malaysian scrap aluminum price points. The specific details are as follows: Adjustment 1: Addition of Tense Scrap Malaysia (Mixed Aluminium Castings) . This price point will replace the existing Shredded Mixed Aluminum Castings (Tense) Scrap in Malaysia, FOB. - Updated price point name and definition: Malaysia Scrap Aluminum Mixed Aluminum Castings (Tense) , EXWorks, excluding VAT, USD/tonne. - Reason: The new price point better aligns with the local scrap aluminum market conditions under updated Malaysian policies, thereby more accurately reflecting market prices. - Launch date: October 13, 2025 - Update frequency: The new price point will be updated before 12:00 PM on the first working day of each week (Kuala Lumpur time). Adjustment 2: Discontinuation of Shredded Mixed Aluminum Castings (Tense) Scrap in Malaysia, FOB . - Discontinuation date: October 10, 2025 We welcome more companies from both upstream and downstream industries to participate and support SMM in better serving the new energy industry chain. If you have any questions, please feel free to contact Liu Xiaolei at (+86)15021973263 or Chin Khai Yuen at (+60)124247012, or email adrian.chin@smm.cn.
PriceSep 26, 2025 15:43In recent years, with the steady development of Malaysia's manufacturing and stainless steel processing industries, the local stainless steel scrap recycling system has become increasingly mature. The number of recyclers, sorting facilities, and reprocessing enterprises has grown significantly, and the proportion of locally recycled scrap in the circular economy continues to rise, providing strong support for regional stainless steel raw material supply. Meanwhile, Malaysia has become one of the main sources of stainless steel scrap imported by India. According to trade statistics, Malaysia exported approximately 107,000 tons of stainless steel scrap to India in 2024, reflecting strong linkage between the two countries in raw material recycling. Large domestic recycling and processing enterprises possess advanced sorting and reprocessing capabilities, enabling them to classify and process regional scrap and steadily supply high-quality materials to major Asian stainless steel producers in Japan, South Korea, and elsewhere. Against the backdrop of a diversified regional raw material structure and growing value of recycled resources, Malaysia's domestic ex-works stainless steel scrap prices have become an important reference indicator for the Southeast Asian stainless steel industry. To meet market demand, enhance price transparency, and help industry participants stay informed of regional price trends, SMM announces that effective October 30, 2025 , it will officially launch: Malaysia 304 SS Scrap,Ex-works Malaysia,USD/tonne Price specifications: Description: Malaysia 304 SS Scrap,Ex-works Malaysia,USD/tonne Quality: Commercial practice standard. Approx. Ni 8%, Cr 18%, non-magnetic, clean scrap, free from oil, coating, and visible impurities. No radioactive or hazardous waste. Definition: Ex-works Malaysia Unit: USD/tonne Quantity: Minimum 10 tonnes Timing: Prompt Publication: 11:30 a.m. Kuala Lumpur time Payment Terms: Cash on same day,other payment terms normalized SMM Nickel & Stainless Steel Industry Research Department October 29, 2025
PriceOct 29, 2025 13:30