Starting from the new all-time high of USD 5,602 on January 29, the gold price has now been in a correction phase for over three months, characterized so far by two sharp downward waves, two recovery waves, and most recently by another downward wave since mid-April.

Recent Performance of Key Iron Ore Price Spreads Since 2024, large-scale iron ore projects in and outside China have been continuously commissioned, leading to a notable increase in iron ore supply. However, the sharp decline in downstream steel demand caused the iron ore supply-demand gap to widen continuously. The iron ore supply-demand pattern shifted from tight to loose, which also led to a year-on-year decline in average iron ore prices. Nevertheless, influenced by multiple factors such as iron ore supply and demand, port inventory, and steel mill profits, the frequency of price spread fluctuations among iron ore varieties increased. SMM reviewed the recent trends of key price spreads, as detailed below: ◼ Internal Differentiation Among Medium-Grade Resources, with Price Spreads Widening Significantly Affected by long-term contract negotiations, the trade liquidity of mainstream medium-grade ore deteriorated significantly. The lack of trade liquidity in certain varieties was directly transmitted to variety price spreads, with price spread fluctuations of mainstream medium-grade ore such as MNPJ intensifying notably. Among them, the price spread between PB fines and Jimblebar fines was the most sensitive: In early September 2025, the price spread between the two was 20 yuan/mt. As news of the ban on Jimblebar fines port cargo pick-up was released, its spot price came under pressure and dropped sharply, with the price spread quickly widening to around 50 yuan/mt. In addition, affected by the reduction in tradable varieties of mainstream Australian medium-grade ore, the variety price spreads between PB fines and Newman fines, as well as MAC fines, also showed a notable narrowing trend. Source: SMM ◼ High-Grade Premium Highlighted, Price Difference Between High and Medium-Grade Ore Widening Rapidly From Q4 2025 to date, price spread fluctuations among high, medium, and low-grade ore were equally intense. After entering 2026, structural contradictions in the iron ore market became further pronounced. Affected by declining raw ore quality from northern Brazilian mining areas, IOCJ fines supply experienced a trend of contraction. Coupled with the cost-effectiveness recovery brought by earlier price weakness and the release of concentrated restocking demand from steel mills ahead of Chinese New Year, IOCJ fines prices received strong support. Meanwhile, mainstream medium-grade ore remained tight in available resources due to trade flow disruptions. Against the backdrop of a shift between high and low-grade resources, the price difference between high and medium-grade ore widened again. Reviewing the period from November 2025 to March 2026, north China entered the heating season, and environmental protection-driven production restrictions became more frequent. As Chinese New Year and the Two Sessions approached, production restrictions were further tightened, with blast furnaces at steel mills in multiple areas of Hebei shut down, leading to a notable decline in hot metal production. Notably, during this period, steel mill profits remained generally stable, and some enterprises, in pursuit of higher output, tended to increase the blast furnace blending ratio of high and medium-grade ore while correspondingly reducing procurement of low-grade ore. Driven by this structural demand shift, the price difference between medium and low-grade ore widened. Source: SMM ◼ Lump-Fines Price Spread Experienced a "V"-Shaped Trend, Declining First Then Rising Since sintering processes generate relatively high pollution emissions, environmental protection-driven production restrictions typically prioritized restricting sintering and shaft furnace production. In north China and north-east China, during heating seasons or major events, if production restriction periods are prolonged, steel mills often increase the proportion of lump ore in their mix to alleviate tight supply of sinter and pellet, thereby driving lump ore prices to rise rapidly. However, over the past three years, the impact of seasonal factors on lump ore demand has gradually weakened, mainly for three reasons: first, steel mills have successively completed ultra-low emission retrofits for flue gas, reducing overall pollution intensity; second, sintering machines in Hebei and other regions have surplus capacity, and environmental protection-driven production restrictions have mostly been limited to within one week, significantly reducing the actual impact on production; third, steel mill profits have been under pressure, reducing the pursuit of hot metal production, and the proportion of high-grade ore usage has adjusted downward accordingly. Under the combined influence of the above factors, since H2 2024, lump ore premiums have continued to decline, hitting a new low by the end of 2025. Meanwhile, the price spread between PB lump and PB fines also narrowed significantly, contracting from 195 yuan/mt to 63 yuan/mt, a decline of over 50%. Against this backdrop, the cost-effectiveness of lump ore gradually became more prominent. Combined with the extended environmental protection-driven production restriction period in northern China in November 2025, the proportion of lump ore usage began to increase. However, as lump ore premiums had remained low for an extended period, product returns were poor, and major mines correspondingly reduced lump ore production. Driven by both supply contraction and demand growth, lump ore premiums rebounded, and the lump-fines price spread widened accordingly. As of mid-March 2026, lump ore premiums have risen to a periodic high, up nearly 280% from early January. The lump-fines price spread has also gradually widened to above 100 yuan/mt. Source: SMM Key Driving Logic of Product Price Spreads Mix Adjustment Led by Steel Mill Profits (Core Driver) ◼ 1 Profit Expansion Phase: High Hot Metal Production Drives Demand for High-Grade Ore When steel mill profits widened and per-mt crude steel returns were higher, steel mills pursued pig iron production and tended to raise the grade of furnace feed. When selecting iron ore, they preferred to purchase high-grade or medium-grade ore. As shown, in H1 2025, profits of common billet at China's steel mills rebounded notably. Common billet profits reached a peak of nearly 350 yuan/mt. At this point, to boost production, steel mills moderately increased the proportion of high-grade IOCJ fines, as well as high-grade lump and pellet usage. Demand growth over a certain period stimulated high-grade ore price increases, and it was clearly evident that the price spread between high-grade and medium-grade ore began to widen. Source: SMM ◼ 2 Profit Contraction Phase: Cost Reduction and Efficiency Improvement Boost Low-Grade Ore Procurement After steel mill profits contracted, to reduce costs and improve efficiency, steel mills significantly increased their focus on cost-effectiveness across iron ore products, tending to prioritize products with higher cost-effectiveness. Within the mid-grade ore range, steel mills preferred varieties with a larger price spread relative to PB fines. Meanwhile, weakening profits meant that higher pig iron or crude steel production led to greater loss pressure. Therefore, steel mills controlled pig iron production rationally from the perspective of economic efficiency. However, given the high comprehensive costs of shutting down or reducing blast furnace loads, steel mills tended to maintain normal blast furnace operations while lowering furnace charge grade and increasing the use of low-grade ore. Under these circumstances, assuming other conditions remained unchanged, the price spread between mid- and low-grade ore tended to narrow. Taking the market around October 2025 as an example, billet profits continued to decline, and the mid-to-low-grade ore price spread narrowed accordingly. Data source: SMM Dual Transmission Paths of Seasonal Effects ◼ Seasonal factors influenced iron ore variety demand through dual paths of "end-use demand fluctuations" and "heating season environmental protection-driven production restrictions" ◼ 1. Seasonal fluctuations in end-use demand: impact on steel mill production and raw material procurement pace The shift between off-season and peak season in end-use demand created cyclical impacts on iron ore variety demand. Off-seasons were mainly concentrated in summer (June–August) and winter (November–February): high temperatures and heavy rainfall in summer suppressed construction, while hydropower replacing thermal power in south China lowered electric furnace production costs and squeezed blast furnace hot metal production; in winter, construction sites in north China shut down and steel demand contracted. During off-seasons, steel mills increased blast furnace maintenance and lowered furnace charge grade to control production, with demand for high-grade iron ore weakening accordingly. During peak seasons (spring March–May, autumn September–October), downstream construction activity was released intensively, steel mills actively ramped up production, and furnace charge grade rose in tandem, strengthening demand for high-grade fines, lump ore, and pellet, supporting their premium performance. In summary, seasonal fluctuations in end-use demand drove cyclical changes in iron ore variety demand by influencing steel mill production and furnace charge grade selection. Transmission logic: end-use demand fluctuations → steel mill production adjustments → changes in total iron ore procurement volume → corresponding shifts in variety demand structure Data source: SMM Data source: SMM ◼ 2. Environmental protection-driven production restrictions during the northern heating season: direct disruption to furnace charge structure and variety premiums Heating season environmental protection-driven production restrictions primarily targeted steel mills in north China, spanning November to April of the following year . During this period, if air quality failed to meet standards, local environmental protection authorities would initiate production restriction measures, prioritizing restrictions on sintering machines and shaft furnaces, leading to tighter supply of sinter and pellet. To maintain blast furnace operations, steel mills were forced to increase the proportion of lump ore in their charge mix, driving a seasonal strengthening of lump ore demand, which in turn supported lump ore premiums and a rise in the lump-fines price spread. Transmission logic: environmental protection policy → sinter machine production restrictions → forced adjustment of furnace charge structure → stronger demand for lump ore and pellet ore → premium fluctuations Data source: SMM Coke prices affected the iron ore product mix through dual channels of fuel costs and profit margins ◼ 1 High coke prices suppressed lump ore demand As raw material directly charged into furnaces, lump ore consumed more coke than sinter and pellet ore, so steel mills typically controlled the lump ore charging ratio at around 10%. During periods when coke prices fluctuated at highs, steel mills tended to reduce lump ore proportions to control fuel costs. Before H1 2024, coke prices fluctuated at highs, and the lump ore usage ratio continued to decline, falling to a low of 9.8%. However, as coke prices underwent nearly a year of decline and entered a low range, combined with relatively low lump ore premiums and the push from environmental protection-driven production restriction policies, the lump ore charging ratio gradually rebounded, once exceeding 11%. Data source: SMM ◼ 2 Demand for high-silicon fines suppressed The higher the silicon content in iron ore, the greater the blast furnace slag volume and the higher the coke ratio. Therefore, low-silicon smelting is a key direction for blast furnace process optimization and a critical lever for cost reduction and efficiency improvement. Among current iron ore products on the market, mainstream mid-grade ore Si content mostly ranges from 4-6%. Brazilian high-silicon BRBF has relatively high Si content at 10-12%. Therefore, Australian ore is mostly used as the primary material, while Brazilian ore and non-mainstream ore serve as auxiliary materials. When coke prices were at highs, the cost disadvantage of high-silicon resources became prominent, and steel mills tended to reduce Brazilian high-silicon BRBF, Indian fines, and South African fines, shifting to mid-to-high-grade fines with lower silicon content (such as PB fines and IOCJ fines). Going forward, the iron ore oversupply pattern will become more prominent, while under overcapacity pressure in China's steel sector, steel mill profits will remain poor. Therefore, cost reduction and efficiency improvement will be a long-term direction, driving stronger demand for low-silicon, low-aluminum products. Consequently, mainstream mid-grade ore will remain the product with the best market circulation. Data source: SMM ◼ 3 Rising share of mid-to-low-grade fines under low profits High coke and ore prices squeezed steel mill profits, and steel mills no longer pursued hot metal production maximization, instead increasing mid-to-low-grade fines usage and lowering charging grade to control costs. Based on historical data, such situations occurred in Q3 2024 and Q2 2025. Auxiliary Variables: Inventory, Substitution, and Preferences ◼ 1 Product substitution effect: mid-grade inter-substitution and "high-low blending" substitution In the product mix of steel mill sinter, "high-low blending" and "mid-grade blending" are commonly mentioned concepts, with the core principle being to select the optimal products based on the cost-effectiveness of different iron ore varieties. Under normal circumstances, steel mills use MNPJ (i.e., mainstream medium-grade ore types such as Mac fines, Newman fines, PB fines, and Jimblebar fines) as primary materials, or adopt a high-low grade combination of " IOCJ fines + super special fines " as primary materials, and adjust auxiliary material ratios based on the acidity and alkalinity of the primary materials. Using mainstream medium-grade ore types as primary materials is the more common practice. When mainstream medium-grade ore types are periodically less cost-effective — for example, when the combined cost of "IOCJ fines + super special fines" is lower than that of medium-grade PB fines — some steel mills periodically switch to high-low grade combinations as primary materials to reduce costs. As shown in the chart, during March to April of 2024 and 2025, the cost-effectiveness advantage of high-low grade combinations was significantly superior to that of medium-grade ore, and therefore some steel mills in regions such as Hebei and Shanxi predominantly chose high-low grade combinations as primary materials during these periods. Data source: SMM ◼ 2. Inventory Structure Drives Price Spreads among Varieties: Inventory Changes and Price Transmission Logic Inventory is the most intuitive reflection of short-term supply-demand imbalances in the iron ore market. When supply is loose or demand weakens, port inventory continues to rise, and inventory levels generally exhibit a negative correlation with prices. Once inventory accumulates to a certain level, it tends to exert significant downward pressure on prices. Over the past two years, the inventory and price trends of Ukrainian concentrate (hereinafter "Ukrainian concentrate") have well validated this pattern. In November 2023, Ukrainian concentrate shipments gradually resumed, but as steel mills still had concerns about the stability of its supply, actual usage did not increase significantly, leading to continued port inventory accumulation. By May 2024, SMM ten-port inventory data by variety showed that Ukrainian concentrate inventory exceeded 3 million mt , exerting significant downward pressure on prices, with Ukrainian concentrate prices falling from 1,200 yuan/mt at the beginning of the year to 900 yuan/mt. Meanwhile, the price spread between Ukrainian concentrate and PB fines also narrowed from 160 yuan/mt to 80 yuan/mt, and its cost-effectiveness advantage gradually emerged, driving a notable increase in steel mill demand. Entering early 2026, affected by a decline in Ukrainian concentrate supply, port inventory retreated from highs to around 1.1 million mt, and tightening supply supported a notable rebound in Ukrainian concentrate prices, with the price spread versus PB fines also widening from 80 yuan/mt to around 100 yuan/mt . Data source: SMM Variety Cost-Effectiveness Assessment Model and Selection Strategy ◼ 1. Horizontal Comparison: Micro-Indicator Assessment among Same-Grade Varieties. In recent years, global mainstream iron ore supply entered a resource transition period, with notable structural adjustment characteristics. On one hand, some aging mines faced resource depletion , with declining mining grades; on the other hand, new mines were still in the capacity ramp-up stage , and the transition between old and new resources still required time. As a result, quality indicators of multiple mainstream varieties were broadly downgraded. Among them, medium-grade ore indicators represented by PB fines and Newman fines weakened; due to declining raw ore quality in Brazil's northern system, not only did IOCJ fines production contract, but the proportion of high-silicon special IOCJ fines output also rose, with silicon content increase being particularly notable beyond the decline in iron grade. Against this backdrop, steel mills tended to assess the most cost-effective varieties by calculating comprehensive price spreads. From the perspective of minor indicator adjustment values, the smaller the adjusted price spread relative to the MMI 61% index, the better the variety met steel mill demand. Based on Q1 averages, Jimblebar fines offered the best cost-effectiveness, followed by PB fines, Mac fines, Newman fines, and BRBR. However, since Jimblebar fines could not be traded or delivered, PB fines remained the optimal choice among medium-grade ores. Data source: SMM ◼ 2. Vertical Comparison: Historical Percentile Timing of High, Medium, and Low-Grade Price Spreads Beyond the horizontal comparison of price spreads among varieties of similar grades, vertically examining price spread changes among high, medium, and low-grade ores was equally important. By analyzing historical percentiles of the price difference between high and medium-grade ore and the price difference between medium and low-grade ore, the relative valuation of each grade could be assessed to guide variety switching and timing. Price difference between high and medium-grade ore: when at historical highs, the high-grade premium was excessive, and switching to medium-grade was advisable under profit pressure; when at historical lows, high-grade cost-effectiveness stood out, and moderate allocation increases were appropriate. Beyond premiums, using IOCJ fines and PB fines as benchmarks and calculating based on their indicator costs, the neutral value of the price spread between the two was 100 yuan/mt. When the spread exceeded 100 yuan/mt, PB fines offered better cost-effectiveness; when below 100 yuan/mt, IOCJ fines were more cost-effective. Price difference between medium and low-grade ore: when at historical highs, low-grade advantages were evident, suitable for cost reduction during thin-margin periods; when at historical lows, medium-grade cost-effectiveness improved, allowing flexible adjustments. Using PB fines and SSF as benchmarks and calculating based on their indicator costs, the price spread between the two ranged from 100-120 yuan/mt, with a midpoint of 110 as the neutral value. When the spread exceeded 110 yuan/mt, super special fines offered better cost-effectiveness; when below 110 yuan/mt, PB fines were more cost-effective. Combining the historical percentiles of both, allocation windows for each grade could be captured based on profit cycles to achieve cost optimization. Data source: SMM ◼ 3 Morphology Comparison: Arbitrage Logic of Fines-Lump Price Spread and Lump Ore Premium. Taking the price spread between PB lump and PB fines as an example, influenced by steel mill profits and coke prices, the fines-lump price spread exhibited notable fluctuations. Historical data showed the price spread between PB lump and PB fines ranged approximately 80–500 yuan/mt. In H1 2021, driven by high steel mill profits and supply-demand mismatch, the fines-lump price spread once approached the historical high of nearly 500 yuan/mt. In recent years, as steel mill profits narrowed, the price spread contracted significantly. In 2025, the fines-lump price spread operated within a range of 70–220 yuan/mt, with an annual average of approximately 128 yuan/mt. In early 2026, the lump ore premium fell to $0.04/dmt, and the price spread narrowed to 65 yuan/mt. Given that China's overcapacity landscape has not fundamentally changed, steel mill profits are expected to remain basically flat with 2025, and the fines-lump price spread is likely to maintain the current range. Based on this assessment: When the lump-fines price spread exceeds 120 yuan/mt, PB fines offer better value; When the lump-fines price spread falls below 120 yuan/mt, PB lump offers better value. Steel mills can choose accordingly based on their own conditions. Data source: SMM ◼ 4 Substitution Comparison: Cost-Effectiveness Competition between Lump Ore and Pellet Generally, when steel mill profits are favourable, steel mills consider increasing the usage ratio of lump ore and pellet. Typically, the combined usage share of lump ore and pellet ranges between 20%–30%. In actual ore blending decisions, steel mills' price spread analysis between lump ore and pellet falls into two categories: inland steel mills usually compare the price spread between domestic pellet and lump ore such as PB lump and Newman lump; while coastal port steel mills focus more on the price spread between imported pellet and corresponding lump ore. In recent years, with the increase in China's pellet capacity and the decline in imported pellet volumes, the weighting of price spread comparison between same-grade lump ore and domestic pellet has further increased. Historical data showed the price spread between 62% grade pellet in Qingdao and PB lump ore at Qingdao port ranged approximately 40–260 yuan/mt, with an annual average price spread of approximately 108 yuan/mt in 2025. Considering steel mills' actual cost accounting, the price spread equilibrium point between pellet and lump ore is generally set at 120 yuan/mt. When the pellet-lump price spread exceeds 120 yuan/mt, lump ore offers better value; When the pellet-lump price spread falls below 120 yuan/mt, pellet offers better value. Steel mills can choose accordingly based on their own raw material conditions, logistics structure, and production requirements. Data source: SMM Carbon Neutrality as a Two-Way Driver: Steel Industry Restructuring Shifts Iron Ore Demand ◼ The rapid advancement of industrialisation has significantly intensified the impact on the global climate, making the urgency of achieving carbon neutrality increasingly pressing. Particularly over the past five years, major economies represented by China and the EU have not only defined their respective emission reduction targets but also successively introduced legally binding regulations, marking a shift in global climate governance from consensus to action. Going forward, China's Ecological Environment Code and the EU's European Climate Law and "Fit for 55" package will become the two major institutional benchmarks for global climate governance. China's carbon market and the EU's CBAM, from the two dimensions of domestic carbon pricing and cross-border carbon adjustment respectively, form core policy tools for effectively controlling carbon emissions. Source: SMM ◼ Driven by both domestic and international legislation, the steel industry will undergo an evolution in emission reduction pathways: process transformation from long-process to short-process steelmaking; low-carbon transition driving non-blast furnace ironmaking development and carbon constraints driving furnace charge structure upgrades. These pathways will collectively reshape the demand structure of iron ore, manifested as strengthened preference for high-grade, low-impurity iron ore concentrates and premium mainstream ore types, while demand for traditional sintering fines tends to narrow. ◼ 1. Process restructuring: the shift from long-process to short-process steelmaking will drive increased demand for mainstream varieties and high-grade ore Under the global backdrop of "carbon neutrality" goals, the steel industry is regarded as one of the key areas for industrial emission reduction. The traditional long process (blast furnace-converter process), due to its reliance on coke and iron ore, is considered a major source of high carbon emissions and has become a key target for regulation and transformation. Many countries have begun shifting toward the more environmentally friendly short process (steel scrap-electric furnace process), but this transition has been relatively slow in China. On one hand, electric furnace steelmaking is largely limited to rebar production; on the other hand, steel scrap supply is constrained. Additionally, considering factors such as melting costs and losses in steel scrap smelting, pig iron costs should be higher than steel scrap prices by 100-150 yuan/mt for steel scrap to be more cost-effective; if the price spread is below this level, pig iron offers better value. In 2025, the price spread between hot metal costs and steel scrap fluctuated in a range of -100-210. Pig iron costs were mostly more favorable than steel scrap, so the share of blast furnace steelmaking in China stayed high. Source: SMM In China, apart from profitability, short-process electric furnaces are also constrained by high electricity prices, steel scrap price fluctuations, and cost disadvantages , resulting in slow capacity growth. Although the national carbon market is already operational, current carbon prices have not been effectively incorporated into trading, which is not enough to drive a large-scale shift from long-process to electric furnaces, and enterprises mostly adopt gradual adjustments . Source: SMM Based on current policy and market conditions, before China's steel industry is formally included in the national carbon market trading and during the early stage of the EU's CBAM policy implementation, the blast furnace-converter long process will remain the dominant mode of global steel production over the next five years. However, under the dual pressures of domestic steel capacity capping and rising carbon prices in the future, China's electric furnace short process is entering a historic development opportunity, with its share of steelmaking set to gradually increase. By 2030, the share of electric furnace steelmaking is expected to reach around 35%. In the long term, this trend will gradually suppress iron ore demand, causing it to weaken. Against the backdrop of oversupply, competition among iron ore varieties will intensify, and therefore high cost-effective varieties with low silicon and aluminum content will become the optimal choice for steel mills. Undoubtedly, mainstream medium and high-grade ore such as PB fines, Mac fines, Newman fines, IOCJ fines, BRBF, and Simandou fines all belong to relatively high-quality varieties. ◼ 2 Low-carbon transition driving non-blast furnace ironmaking development, demand for high-grade iron ore concentrates with Fe content above 65% expected to continue rising Currently, global DRI production accounts for only 10% of total global production. As low-carbon technologies such as hydrogen-based DRI accelerate in application, DRI production share is expected to rise to 13% by 2030. In comparison, China's non-blast furnace ironmaking share is even smaller, with mass production not yet achieved and only leading steel enterprises in the trial production stage. Under current carbon neutrality requirements, China's non-blast furnace ironmaking is facing significant development opportunities. According to incomplete statistics, announced non-blast furnace ironmaking capacity totaled approximately 18 million mt, of which only 2 million mt were under construction, with the remaining 16 million mt of projects still in early stages, carrying relatively high risk coefficients. Whether these projects materialize depends on multiple factors including funding, market conditions, decarbonization policies, and government support, resulting in significant uncertainty regarding future commissioning time. Future projects will primarily be gas-based; current major DRI equipment uses coke oven gas (COG), but in the medium and long-term will gradually shift to green hydrogen. Data source: World Steel Association Data source: SMM Currently, the core requirements for DRI raw materials are "high grade, low impurities," with Fe grade ≥66% and SiO2+Al2O3 ≤3.5%. China's concentrates generally have relatively high silicon content, with some exceeding 10%. Therefore, only a few low-silicon concentrates can be used to produce direct reduced pellet feed. Ex-China high-grade concentrates offer a wider range of options. Data source: SMM As DRI production grows, demand for high-quality iron units is also increasing, leading to a structural rise in the share of high-grade iron ore and pure iron raw materials. As shown in the chart, varieties within the red box all have Fe content above 66%, with Si+Al content around 3.5%; these include some high-grade iron ore concentrates from China, Brazilian pellet feed concentrates, Peruvian concentrates, and emerging Simandou fines, all of which can serve as DRI raw materials. Data source: SMM ◼ 3. Carbon constraints drive furnace charge structure upgrades, with pellet replacing sinter becoming key to carbon reduction, and pellet-making concentrates with grades above 62% set to see significant growth. As China's steel industry pursues structural adjustment, optimization, and green, low-carbon, high-quality development, pellet ore as a premium raw material for blast furnaces has been increasingly favoured by the industry, driving the rapid development of the pellet sector. The energy consumption of the pellet production process is approximately 50% of that of the sinter production process. According to CISA's 2025 statistics, the average energy consumption of the sintering process among its member units was 48.5 kg/mt, while the average energy consumption of the pellet process was 25.23 kg/mt, indicating lower energy consumption in pellet production. Due to the different heat supply methods in pellet roasting compared to sintering, SO2, NOX, and CO2 emissions after combustion are much lower than those from the sintering process. In addition, pellet ore generates much less dust than sinter, making the pellet process more environmentally friendly. The emission comparison between the sintering process and the pellet process is shown in the chart below: Data source: SMM ◼ A high proportion of pellet ore in furnace charge is the direction and demand of current blast furnace charge structure development Compared with other countries in the world, China's blast furnace charge structure is dominated by sinter with a low pellet ratio , while blast furnaces in North America and Europe primarily use high proportions of pellets, with some blast furnaces reaching 100%. For example: SSAB's blast furnace in Sweden had a pellet ratio of 97.2%, Dofasco in Canada achieved 100% all-pellet smelting, and USS No. 14 blast furnace had a pellet ratio of 80%, etc. According to CISA's 2025 statistics, the average fuel ratio per unit of ironmaking at China's key steel enterprises was 523-525 kg/mt, approximately 70 kg higher than the average fuel ratio of European and American blast furnaces. The reason is that China's blast furnace charge is dominated by sinter, with sinter iron grade at around 54-57%, while pellet ore iron grade is above 62%. High sinter usage leads to high slag volume and high energy consumption in blast furnaces. Therefore, against the backdrop of carbon reduction, increasing the proportion of pellet ore usage is imperative. Data source: SMM ◼ Currently, there are three main types of pellet production equipment in China: shaft furnaces, chain grate-rotary kilns, and travelling grates . In recent years, pellet equipment with a single-unit capacity below 1.2 million mt/year (excluding ferroalloy and foundry pig iron pellets) has been classified as a restricted category; therefore, capacity replacement of pellet equipment continues, with new pellet projects predominantly using travelling grates, with single production line capacity mostly at 5 million mt. As a result, current pellet production is mainly based on rotary kilns and travelling grates. These two types of equipment have less stringent raw material requirements compared to shaft furnaces, allowing the blending of multiple ore types such as magnetite, hematite, and limonite. However, it must be concentrate, with a particle size requirement generally of -200 mesh, 70% or above. Commonly used varieties include: domestic concentrate, Ukrainian concentrate, Brazilian concentrate, Middle Eastern concentrate, Chilean concentrate, Australian concentrate, Sierra Leonean concentrate, etc. As the proportion of pellet usage increases in the future, demand for concentrate with grades of 62% and above will continue to expand. ◼ Overall, before 2030, as carbon neutrality policies and Europe's CBAM are still in the early stages of implementation, carbon emission costs have not yet become significantly prominent. Meanwhile, China's steel production is trending downward, while iron ore supply is accelerating, steel mill profits are under pressure, and cost reduction and efficiency improvement remain the industry's mainstream strategy. Therefore, procurement will continue to focus on low- and medium-grade iron ore, demand for non-mainstream ore varieties will remain robust, the price spread among high-, medium-, and low-grade ore will be difficult to widen, and premiums for lump ore and pellets will also stay at current low levels. ◼ After 2030, market requirements for green steel will gradually increase, the share of electric furnace steelmaking and non-blast furnace steelmaking will rise, and overall iron ore demand will decline notably. Although blast furnace capacity will decrease, operating rates may improve, driving down sinter demand while pellet demand increases significantly. This shift will lead to a sharp decline in fines demand and an expansion of market share for mainstream medium-grade ore; meanwhile, demand for high-quality concentrate will rise, pushing the price difference between high and medium-grade ore wider, and pellet premiums will also continue to climb. Additionally, although lump ore demand has some growth potential, the increase will be limited under carbon emission constraints, and lump ore premium elasticity will diminish accordingly.

As of April 24, SMM APT CIF Rotterdam averaged $3,050/mtu, down $135 WoW; Ferro-tungsten averaged $300/kg W, down $20 WoW. Trading remained thin as buyers and sellers stayed on the sidelines amid heightened wait-and-see sentiment.

[Brief Review of China's Domestic Ore Market] The domestic ore market in western Liaoning showed no significant fluctuations. Currently, the ex-factory prices of 66-grade iron ore concentrates on a wet basis and tax-exclusive basis stood at 730-740 yuan/mt. Recently, steel mills in the linked region of Tangshan slightly increased prices, and ore beneficiation plants held a strong bullish sentiment, with no willingness to sell below their psychological expectations. However, buyers maintained a cautious outlook on the market, keeping inquiries at low offers and restocking on demand at acceptable prices.

[Brief Review of China's Domestic Ore Market] The domestic ore market in western Liaoning showed no significant fluctuations. Currently, the ex-factory prices of 66-grade iron ore concentrates on a wet basis and tax-exclusive basis stood at 730-740 yuan/mt. Recently, steel mills in the linked region of Tangshan slightly increased prices, and ore beneficiation plants held a strong bullish sentiment, with no willingness to sell below their psychological expectations. However, buyers maintained a cautious outlook on the market, keeping inquiries at low offers and restocking on demand at acceptable prices.

Conclusion first: cobalt prices in H2 are more likely to rise than fall. Any disruption from external factors could further exacerbate tight supply, thereby pushing cobalt prices higher. Most Chinese-invested miners own self-built smelters or have cross-shareholding and long-term close cooperative relationships with downstream enterprises. Therefore, the DRC export quotas obtained by Chinese-invested companies will be delivered to China's downstream market in a timely and stable manner. We calculate the quotas of Chinese-invested and foreign-invested companies separately. I. Based on current market conditions, we make the following assumptions: 1. DRC shipment pace: maintaining current efficiency. It is expected that in July this year, goods from 25Q4 and 26Q1 will arrive at ports successively; by the end of 2026, goods from 26Q2-3 will arrive in batches. 2. Indonesian MHP supply: even with disruptions from external factors such as Middle East geopolitical conflicts, cobalt supply from Indonesian MHP will at least not decline YoY. Total cobalt imports from MHP in 2025 were 53,000 mt in metal content, and 2026 is expected to be no less than 53,000 mt in metal content. 3. China recycling volume: annualized based on enterprise recycling volumes in 26Q1. Monthly ternary cobalt recycling volume is expected to be no less than 1,000 mt in metal content, and high-cobalt recycling volume no less than 1,500 mt in metal content. 4. Raw material supply structure: intermediate product supply directed to ternary cathode is expected to decline to approximately 7,000 mt in metal content in H2 2026; no major shifts in other existing supply structures. 5. China inventory buffer: current upstream and downstream enterprise raw material inventories can sustain supply through June this year. Before intermediate products arrive in bulk during June-July, no supply disruption will occur across the market. Moreover, apart from refined cobalt, other raw materials no longer have large inventories. II. Supply and Demand 1. Ternary sector: Demand side: full-year 2026 ternary cobalt demand is estimated at 58,000 mt in metal content. Supply side: cobalt imports from MHP in 2026 at 53,000 mt in metal content; ternary cobalt recycling at approximately 12,000 mt in metal content; intermediate product supply to ternary in H2 2026 at 7,000 mt in metal content. 2. LCO, cathode additives, and cobalt powder: Demand side: total full-year 2026 demand for LCO, cathode additives, and cobalt powder is estimated at 81,000 mt in metal content. H1 is primarily focused on digesting inventories and high-cobalt recycling, with H2 (July-December) demand at approximately 42,000 mt in metal content. Supply side (H2): non-DRC quota sources combined with high-cobalt recycling are expected to provide at least 12,000 mt in metal content; from DRC export intermediate products, counting only the Chinese-invested enterprise portion, approximately 40,000 mt in metal content can be supplied. Total H2 supply is approximately 52,000 mt in metal content. 3. Refined Cobalt Rigid demand production: certain downstream industries have rigid demand for refined cobalt, consuming approximately 400 mt in metal content of intermediate products per month for refined cobalt production, with all raw materials being intermediate products. This volume is not high overall but remains stable. Inventory impact: under the high-priced intermediate product environment, the current large inventory of refined cobalt will have a significant impact on the production side. Therefore, we currently calculate based primarily on rigid demand production. 4. Chemicals Industries such as feed and adhesives have relatively stable monthly demand for cobalt hydroxide. On average, monthly demand is approximately 1,000 mt in metal content, with raw materials primarily being MHP. Considering all the above, inventory buildup by the end of 2026 is 8,000 mt in metal content for MHP and 7,000 mt in metal content for intermediate products. Miner behavior: some miners are currently purchasing intermediate products on the market at relatively high prices, close to or reaching the level of $26/lb. Judging from this behavior, market participants generally have expectations for the H2 market, and the likelihood of selling at low prices is relatively small. III. Future Expectations Based on the above supply-demand balance analysis, whether on the upstream supply or downstream demand side, any shortfall in supply versus expectations or any recovery in downstream demand will impact the current fragile balance, at which point foreign-invested goods will need to enter the market to supplement supply. Therefore, the overall tone for the 2026 cobalt market is considered to be more likely to rise than fall. Wang Zhaoyu 15927163529