On Tuesday, Eastern Time, Chicago Fed President Goolsbee warned that the energy shock stemming from the Middle East conflict is threatening the US Fed’s dual mandate, complicating its monetary policy outlook and potentially delaying interest rate cuts—echoing earlier remarks by Fed Governor Barr that inflation risks and oil prices support keeping rates unchanged for longer. Specifically, the energy price shock poses risks to both sides of the US Fed’s dual mandate, making the trade-off between controlling inflation and supporting economic growth more complex. “The new shock has undoubtedly disrupted the US Fed’s plans... and inflation was already uncomfortably high even before the shock occurred,” Goolsbee said bluntly. Goolsbee noted that central bank policymakers around the world lack clear historical experience to draw on in dealing with the current mix of geopolitical risks and inflationary pressures, and therefore “this is a bad situation for central banks.” Goolsbee stressed that the current path of interest rates at central banks around the world still depends heavily on how the conflict evolves, especially its impact on energy markets. As for the US Fed, he said he is not yet able to judge whether it will be able to cut interest rates again, because that outlook depends on the duration of the conflict and the extent to which rising oil prices affect overall inflation. “Only if inflation shows improvement can one realistically expect rates to fall this year,” he added, further reinforcing the US Fed’s data-dependent stance. The US Fed’s Internal Stance Is Turning More Cautious These remarks by Goolsbee were highly consistent with earlier comments by Fed Governor Michael Barr. Barr had previously also emphasized that, given that US inflation remains above target and elevated oil prices are further pushing up inflation, interest rates may need to remain unchanged “for some time.” In addition, Barr likewise pointed out that although the US labour market appears to be stabilizing, US Fed officials need to see clear evidence of sustained disinflation before considering interest rate cuts. Taken together, these comments highlight the US Fed’s increasingly cautious shift in stance. As geopolitical developments exert a growing influence on the US inflation outlook, the combination of persistent price pressures and external shocks has reinforced expectations that high inflation will last longer, while also creating uncertainty over the feasibility of further policy easing in the near term. For markets, the key point is that after the Russia-Ukraine shock several years ago, energy-driven inflation risks have now been firmly incorporated into the US Fed’s reaction function. As a result, US Fed rate expectations may remain sensitive not only to economic data, but also to developments in the Middle East conflict and their impact on oil prices.
Mar 25, 2026 10:46Strait of Hormuz disruptions and Iran tensions are driving up aluminum prices and premiums. Aluminium Bahrain and Qatalum have cut output, while feedstock is tight. Rerouting via Port of Sohar or Saudi ports raises costs and delays. Buyers are turning to China, India, Russia, Canada, and scrap to offset risk. Prolonged disruption could reduce Middle East market share and reprice it as higher-risk supply.
Mar 24, 2026 17:22As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.
Mar 24, 2026 15:54Recently, Mingyang Hydrogen’s MYH-K-1000 electrolyzer completed the authoritative evaluation under the China Hydrogen Alliance’s “Leader Program” and received the official test report. With multiple industry-leading performance indicators, it has established a new benchmark for alkaline electrolyzers adapted to fluctuating new energy scenarios, marking a major technological milestone for the company in the field of hydrogen energy equipment. This product is the first 1,000 Nm³/h-class alkaline electrolyzer on the China Hydrogen Alliance’s field-testing platform to achieve the “15th Five-Year Plan” target of 20%–120% ultra-wide flexible load regulation . At the 20% minimum load, it can stably control hydrogen content in oxygen to within 1.5%, enabling long-term stable operation. It also features rapid load response capability of 5%/s to 10%/s. Its core performance is industry-leading and perfectly suited to the flexible operating conditions of wind and solar power generation, providing robust support for the development of the green fuel industry. The test certification presentation ceremony was held at Mingyang Hydrogen’s Beijing Center. Yu Tianxiao, Director of the Quality Value Center at Guoneng Hydrogen Innovation and Deputy General Manager of Hydrogen Testing Technology, presented the certification report to Pan Yongle, Executive Director and CEO of Mingyang Hydrogen, and both parties witnessed this important moment together. Rigorous Field Testing Validates Outstanding Performance, Strong Results Under Extreme Cold Conditions According to the alliance’s field-test data, under 100% rated load, the MYH-K-1000 kept hydrogen content in oxygen below 0.5% and successfully passed load ramp-up and ramp-down tests at 3%/s and 5%/s. Under the ultra-low load of 20%, hydrogen content in oxygen remained compliant, while DC power consumption was as low as 3.85 kWh, achieving efficient and stable operation. This long-duration test was conducted throughout in an outdoor environment at minus 20°C . The product still demonstrated excellent cold and hot start capabilities, as well as high reliability, high safety, and fully flexible operating characteristics, overcoming the longstanding low-temperature operating limitations of traditional electrolyzers and enabling adaptation to more extreme application scenarios. Breakthroughs in Core Technology Innovation Set a New Industry Benchmark This electrolyzer adopts advanced integrated die-casting technology, delivering high consistency in its internal structure. The area of its electrolysis unit is 75% larger than that of traditional designs, and it overcomes sealing challenges on the basis of zero-electrode-gap technology, significantly improving product performance and production efficiency and setting a new technological benchmark for the industry. Company Statement: Continuous Innovation-Driven Development and Deepening Commitment to Hydrogen Energy Equipment Pan Yongle, CEO of Mingyang Hydrogen, stated that this certification is the result of the team’s technological breakthroughs. The company will continue to uphold the philosophy of “innovation-driven, green future,” further increase R&D investment, launch more high performance products, provide global clients with high-quality hydrogen energy solutions, and support the industry’s high-quality development.
Mar 24, 2026 11:53Jan-Feb 2026 China magnesium exports reached 72.7kt, up 3.4kt YoY. Magnesium alloy led with +33.1% YoY, orders booked through April. Magnesium ingot fell 6.8% due to weak European demand, while powder grew 10.3%. However, US-Israel conflict disrupted Middle East aluminum plants, halting regional magnesium orders and pressuring Q2 outlook despite the strong start.
Mar 23, 2026 17:59The gold price is currently causing nervousness once again. Since the start of the war involving the USA and Israel against Iran, the precious metal has recorded a daily loss of 4% for the second time.
Mar 23, 2026 10:34Dear Users: Hello: To ensure data consistency with the source and respond to customer feedback, we have expanded the unit of zinc-related import and export data in the non-ferrous metals database to the smallest level. Core changes: Units such as "10,000 mt" and "mt" have been changed to "kg". The specific details are announced as follows: I. Reasons for Adjustment Due to the need for country-specific breakdown of imports and exports, the unit has been adjusted to the smallest value To better serve customers, SMM has expanded the import and export data related to the zinc industry chain to include all countries. This will result in the previously set units such as "mt" and "10,000 mt" being unable to match data from all countries. Therefore, SMM has changed the unit to the smallest value. II. Adjustment Details III. Effective Date of Adjustment This adjustment will take effect on August 8, 2025 SMM (Shanghai Metals Market) August 4, 2025
DataAug 4, 2025 11:34Dear User, During the development of the automotive steel market, changes have occurred in some mainstream brands, materials, and specifications. As a result, certain prices in the SMM Automotive Section currently deviate from the actual market situation. SMM has decided to discontinue the price points for certain materials/specifications of alloy structural steel, spring steel, cold heading steel, carbon round steel, and mold steel, effective from February 13, 2026. Customers who use the relevant prices for settlement should pay attention to the time period and adjust their price usage promptly to avoid any impact on your business due to the discontinuation of these price updates. A total of 10 price points are being discontinued, with details as follows: Spring Steel 65Mn Φ6.5-20 (Nationwide) Cold Heading Steel 35K Φ6.5-20 (Nationwide) Alloy Structural Steel 20CrMo Φ16-200 (Nationwide) Alloy Structural Steel 35CrMo Φ16-200 (Nationwide) Alloy Structural Steel 40MnBH Φ29-250 (Nationwide) Carbon Round Steel 45# Φ16-18 (Nationwide) Carbon Round Steel 45# Φ131-180 (Nationwide) Mold Steel 1.2311 21-120*1800-2200 (Nationwide) Mold Steel 4Cr13 Φ20-130 (Nationwide) Mold Steel W6Mo5Cr4V2Co5/M35 Φ20-80 (Nationwide) https://car.smm.cn/price Recommended new prices for use are as follows: Specialty Wire Rod: https://car.smm.cn/price?type_id=19&item_id=115&goods_id=0 Specialty Bar: https://car.smm.cn/price?type_id=19&item_id=114&goods_id=0 Mold Steel: https://car.smm.cn/price?type_id=19&item_id=117&goods_id=0
PriceJan 30, 2026 16:30SMM is delisting 11 price points for various automotive steels, effective February 6, 2026, due to market changes.
PriceJan 26, 2026 19:33