[SMM Tin Midday Review: Resonance Between Macro Pressures and Supply Recovery Kept SHFE Tin Under Pressure and Continued to Weaken]

SMM Nickel News, March 19: Macro and Market News: (1) The US Fed kept interest rates unchanged at 3.5%-3.75%, while Governor Milan believed rates should be cut by 25 basis points. The impact of developments in the Middle East on the US economy remained uncertain. The dot plot maintained expectations for one interest rate cut in each of the next two years, but the distribution turned more hawkish. Market bets on the US Fed's rate cuts for the full year were reduced from about 20 basis points to less than 11 basis points. (2) Powell believed interest rates were at the high end of the neutral range, or slightly restrictive, leaving policy in a favorable position, and said the current situation was not stagflation. This energy supply disruption was a one-off event. Regarding whether he would remain in office, Powell stressed that he would not leave before the investigation concluded, and might not leave even after it concluded. If no successor was confirmed, he would continue to serve as acting chair. Spot Market: On March 19, the SMM price of #1 refined nickel fell by 3,100 yuan/mt from the previous trading day. In terms of spot premiums, the average price of Jinchuan #1 refined nickel was 6,750 yuan/mt, up 200 yuan/mt from the previous trading day; mainstream electrodeposited nickel brands in China were quoted at -300-400 yuan/mt. Futures Market: The most-traded SHFE nickel contract (2605) plunged sharply during the session and closed the morning session at 131,760 yuan/mt, down 2.79%. Tensions in the Middle East remained elevated, and the escalating conflict between Iran and Israel triggered market concerns over rising energy prices, intensifying inflation, and economic slowdown. Safe-haven sentiment heated up. Combined with the US Fed keeping interest rates unchanged while raising inflation expectations, expectations for interest rate cuts were revised down, causing metal prices to fall sharply across the board. Pressure from the macro perspective may continue to dominate market sentiment, and nickel prices are expected to remain in the doldrums.

This week, the second-life battery market showed clear structural divergence. On the cost side, although lithium carbonate prices saw a temporary uptick this week, they trended downward overall; nickel sulphate prices edged down slightly, while cobalt sulphate prices remained stable. The cost side was mainly affected by fluctuations in lithium carbonate prices. On the supply side, driven by terminal energy storage demand, inventories of new battery cells at battery cell manufacturers were critically low, and the supply of Grade A battery cells was heavily diverted, causing supply in the second-life battery market to remain tight. On the demand side, 280Ah and 314Ah energy storage battery cells were subject to concentrated procurement in the market, resulting in severe shortages and noticeably rising prices. Meanwhile, demand in the EV sector remained weak, inventory was relatively sufficient, and second-life power battery cell prices stayed stable.

[SMM Stainless Steel Daily Review] SS Futures Continued to Pull Back, Stainless Steel Spot Quotes Were Lowered SMM News on March 19: SS futures extended their further downward pullback. Against the backdrop of hawkish remarks from the US Fed and escalating geopolitical conflicts, non-ferrous metal futures generally moved lower, with SS also declining in tandem and closing at 13,935 yuan/mt by the midday break. In the spot market, continued declines in SS futures significantly weakened market confidence; coupled with the recent pullback in high-grade NPI prices, market expectations for cost support also softened. In a market where transactions had already been sluggish this week, inquiries and deals weakened further; in addition, March supply remained high, prompting traders to lower their quotes for 304 stainless steel during the day. However, supported by news yesterday that steel mills were holding prices firm, 200-series stainless steel rose against the trend, with 201 stainless steel prices moving higher. Further attention should still be paid to downstream end-user purchase conditions. The most-traded SS futures contract fell and pulled back. As of 10:15 a.m., SS2605 was quoted at 13,930 yuan/mt, down 100 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 340-540 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coil in Wuxi rose 50 yuan/mt; for cold-rolled trim-edge 304/2B coil, the average price in Wuxi fell 150 yuan/mt and in Foshan fell 50 yuan/mt; cold-rolled 316L/2B coil in Wuxi fell 200 yuan/mt; for hot-rolled 316L/NO.1 coil, Wuxi quotes fell 100 yuan/mt; cold-rolled 430/2... in both Wuxi and Foshan.

[SMM Daily Review: Sharp Drop in Nickel Prices Dragged Down Market Confidence, High-Grade NPI Price Center Pulled Back] March 19 News: SMM's upstream sentiment factor for high-grade NPI was 2.88, up 0.07 MoM, and the downstream sentiment factor for high-grade NPI was 1.59, up 0.02 MoM.

Recently, two hydrogen-powered excavators, two hydrogen-powered loaders, and four hydrogen-powered wide-body mining trucks were officially put into operation in the Jinshan mining area, marking the implementation of the integrated “production, storage, refueling, transportation, and use” layout of Daye’s hydrogen energy industry in the application segment. This achieved the large-scale use of hydrogen-powered heavy engineering equipment in mining areas across China and injected new momentum into the green, low-carbon transformation of mines. As core equipment developed by Taiyuan Heavy Machinery, the TZ350EH hydrogen-powered excavator and TZ958EH hydrogen-powered loader worked in coordination with hydrogen-powered wide-body mining trucks, covering the entire process of mining, loading, and transportation. The equipment emitted only pure water, thoroughly improving the operating environment of traditional mining areas. This batch of hydrogen-powered equipment was deeply optimized for the complex working conditions of mines, with prominent core advantages: the hydrogen-powered excavator featured zero emissions and low noise, and could operate at full load after just five minutes of hydrogen refueling; the hydrogen-powered loader integrated hydrogen power with heavy-load performance and, equipped with proprietary technology, reduced consumption and improved efficiency; the hydrogen-powered wide-body mining truck offered fast energy replenishment, a high energy recovery rate, and excellent low-temperature starting performance, laying a solid foundation for green transportation. This large-scale deployment enabled hydrogen-powered equipment to undergo practical verification in real mining scenarios. It not only opened up a new path for the clean replacement of mining equipment, but also stabilized market demand for upstream hydrogen production, storage, and transportation, promoted coordinated development across the upstream and downstream segments of the hydrogen energy industry chain, and provided a replicable and scalable practical model for transforming traditional mining areas into green and intelligent mines.