Dalian iron ore was generally weak today. The most-traded contract, I2605, finally closed at 806.5 yuan/mt, down 1.83% from the previous trading session. Spot prices fell by about 10-15 yuan from the previous trading day. Traders actively offered quotes, while steel mills mainly made inquiries and purchases based on rigid demand, with cautious inquiries; overall, the spot market trading atmosphere was average. According to the latest SMM survey data, hot metal daily average production reached 2.4049 million mt this week, an increase of 15,000 mt WoW, with demand showing a steady improvement. In terms of supply, some iron ore originally planned for shipment to the Middle East began to be redirected to the Chinese market, including some ore grades used for direct reduced iron (DRI), increasing market supply options and putting some pressure on prices. From a macro perspective, the situation in the Middle East remained tense, and the escalation of war triggered a sharp rise in energy prices, driving up global inflationary pressure. Expectations for US dollar interest rate cuts weakened significantly, leading to a certain pullback in commodity prices, including iron ore prices. Overall, iron ore prices faced strong resistance in the short term, but downside room was limited, and the market is expected to continue moving in a sideways range.

[SMM Cast Aluminum Alloy Morning Comment: Aluminum Prices Halted Their Decline, but Wait-and-See Sentiment Remained Unchanged; Rangebound Movement May Continue in the Short Term] Spot market, yesterday the overall ADC12 market continued to hold prices steady. Aluminum prices showed signs of halting their decline, but market sentiment recovered only limitedly, and enterprises generally chose to postpone price adjustments and mainly adopt a wait-and-see stance. Demand side, downstream orders did not improve significantly, and just-in-time procurement remained the main approach, with mediocre transaction performance. Against the backdrop of easing cost-side fluctuations and insufficient demand support, ADC12 prices may continue to fluctuate within a range and remain relatively stable in the short term, with relatively limited momentum for price adjustments. Further attention should still be paid to aluminum price trends and the recovery of end-use demand.

Futures: Overnight, LME lead opened at $1,895.5/mt. After the opening, prices quickly fell to $1,885.5/mt, then fluctuate rangebound within the $1,888–1,896.5/mt range, with a balanced tug-of-war between longs and shorts and cautious market sentiment. After 0:00, prices rose further, breaking above the previous trading range and touching a high of $1,901/mt, before finally closing at $1,898.5/mt. A small bullish candlestick was recorded, up $0/mt, or 0.0%. Overnight, the most-traded SHFE lead 2605 contract opened at a low of 16,420 yuan/mt. In early trading, SHFE lead prices rose rapidly, then saw wide swings within the 16,440–16,481 yuan/mt range, with an evident tug-of-war between longs and shorts. Intraday volatility narrowed, and prices gradually stabilized around 16,455–16,465 yuan/mt, while trading volume pulled back simultaneously and market sentiment turned cautious. Late in the session, SHFE lead broke upward again, touching a high of 16,500 yuan/mt, then quickly pulled back to finally close at 16,470 yuan/mt. A small bullish candlestick was recorded, up 50 yuan/mt, or 0.3%. On the macro front: 1. Poll: Trump’s approval rating fell to its lowest level since returning to the White House. 2. US media: The US Department of Justice admitted it lacked evidence in its investigation into Powell. 3. Turkey considered using its $135 billion gold reserves to defend the lira. 4. Israeli media: The US intended to seek a one-month ceasefire to discuss a 15-point agreement with Iran. 5. Goldman Sachs maintained its overweight recommendation on Chinese equities (A-shares and Hong Kong stocks). Spot fundamentals: SHFE lead remained in the doldrums, while suppliers held prices firm on shipments. Quotations in Jiangsu, Zhejiang, Shanghai were raised slightly in spot premiums, while quotations for cargoes self-picked up from production site at primary lead plants changed little. Mainstream producing areas quoted premiums of 0-50 yuan/mt against the SMM #1 lead price, with a few quoting premiums of 100 yuan/mt ex-works. On the secondary lead side, some secondary lead enterprises had maintenance plans, and circulating cargoes in the spot market were limited. Secondary refined lead was quoted at premiums of 0-75 yuan/mt against the SMM #1 lead average price, ex-works. Downstream enterprises maintained purchasing as needed, but some engaged in more bargaining. In addition, as secondary lead prices inverted against primary lead, spot order purchases tilted toward primary lead. Inventory: As of March 24, LME lead inventory fell by 725 mt, or 0.26%, to 283,350 mt. As of March 23, SMM social inventory of lead ingot across five regions pulled back somewhat from previous inventory at high levels. Today’s Lead Price Forecast: Supply side, primary lead smelters held firm offers, and spot premiums in Jiangsu, Zhejiang, Shanghai were raised slightly, while quotations for cargoes self-picked up from production site at primary lead smelters changed little. Some secondary lead smelters had maintenance plans, and circulating cargoes in the spot market were limited. Demand side, downstream enterprises maintained purchasing as needed, but some engaged in more bargaining, and as secondary lead prices inverted against primary lead, spot order procurement tilted toward primary lead. According to SMM analysis, SHFE lead prices were likely to remain in the doldrums in the short term.

SMM, March 25: Overnight, LME lead opened at $1,895.5/mt. After the opening, prices quickly fell to $1,885.5/mt, and then fluctuate rangebound within the $1,888–1,896.5/mt range, with a balanced tug-of-war between longs and shorts and relatively cautious market sentiment. After 0:00, prices rose and broke above the previous trading range, hitting a high of $1,901/mt before closing at $1,898.5/mt. A small bullish candlestick was recorded, up $0/mt, or 0.0%. Overnight, the most-traded SHFE lead 2605 contract opened at a low of 16,420 yuan/mt. In early trading, SHFE lead prices rose rapidly, and then saw wide swings within the 16,440–16,481 yuan/mt range, with an evident tug-of-war between longs and shorts. Intraday volatility narrowed, with prices gradually stabilizing around 16,455–16,465 yuan/mt, while trading volume also pulled back and market sentiment turned cautious. Late in the session, SHFE lead again broke upward, hitting a high of 16,500 yuan/mt, then quickly pulled back to close at 16,470 yuan/mt. A small bullish candlestick was recorded, up 50 yuan/mt, or 0.3%. Supply side, primary lead smelters held firm offers, while spot premiums in Jiangsu, Zhejiang, Shanghai edged up slightly, and quotes for primary lead smelter cargoes self-picked up from production site changed relatively little. Some secondary lead smelters had maintenance plans, and spot market circulating cargoes were limited. Demand side, downstream enterprises maintained purchasing as needed, but some engaged in more bargaining. In addition, as secondary lead prices were inverted against primary lead, spot order purchases tilted toward primary lead. According to SMM analysis, SHFE lead prices are likely to remain in the doldrums in the short term.

The operating rate of major copper cathode rod enterprises in China stood at 81.51% last week (March 13–March 19), marking the fourth consecutive week of MoM improvement since the Chinese New Year, with industry sentiment continuing to recover. The strong rebound in the operating rate in this round was mainly driven by two factors: first, the relatively weak operating rates of secondary copper rod enterprises, coupled with the price difference between copper cathode and copper scrap remaining at a relatively low level, significantly weakened the substitution effect between copper cathode and copper scrap, leaving more market room for copper cathode rod; second, improving orders for downstream wire and cable and enamelled wire boosted a faster drawdown in enterprises' finished product inventories. As copper prices broke above low-level support, downstream procurement sentiment continued to heat up, and new orders for copper cathode rod enterprises showed a pattern of concentrated volume release. Most enterprises reported that their production pace could no longer keep up with shipment progress, and some had already begun to proactively control the pace of taking orders to ensure contract fulfillment. From the downstream industry perspective, wire and cable as well as enamelled wire enterprises also benefited from the pullback in copper prices, with operating rates steadily rebounding, further boosting demand for copper rod. Inventory side, although the pullback in copper prices boosted enterprises' willingness to restock, constrained by limited room for capacity release, enterprises did not excessively stockpile on dips and mostly maintained normal production raw material reserves. Meanwhile, due to continued downstream pick-up of goods, enterprises' capacity was unable to fully match order demand, accelerating the drawdown of finished product inventories. Enterprises Raise Processing Fees and Increase Margin Requirements to Control Risks After copper prices pulled back sharply, downstream purchase willingness increased significantly, and order concentration rose markedly. To reasonably control the pace of taking orders, some enterprises urgently raised processing fees. At the same time, affected by the increased uncertainty in the pace of cargo pick-up caused by concentrated downstream order placement, as well as the continued decline in copper prices, enterprises became more concerned about the default risk of earlier high-priced orders, and some enterprises simultaneously increased margin ratios to strengthen risk control. Looking ahead, with copper prices rising at present, downstream procurement sentiment has clearly weakened. To ensure stable deliveries, copper cathode rod enterprises are expected to maintain relatively high operating loads. Although rigid demand is gradually being fully released, against the backdrop of low finished product inventories, enterprises will still maintain high operating rates to replenish inventory. Accordingly, SMM expects the operating rate of China's copper cathode rod enterprises to fluctuate at highs in March.

[Overnight, LME Aluminum and SHFE Aluminum Edged Up Slightly, but Aluminum Prices Faced Short-Term Pressure at High Levels] Continued destocking in LME inventory provided bottom support for LME aluminum, but amid tightening fund liquidity and profit-taking by bulls, upward momentum remained insufficient, and the backwardation structure weakened somewhat. China’s social inventory rose to a high for the same period in nearly five years, and the inventory buildup cycle had yet to end, with high inventory and weak spot fundamentals jointly weighing on upward momentum. The divergence between domestic and overseas drivers continued, the SHFE/LME price ratio kept weakening, and prices were mainly under pressure in the short term.