[SMM Stainless Steel Daily Review] News-Driven Disturbances Pushed SS Futures Higher to Test the Upside, Confidence in the Stainless Steel Spot Market Gradually Recovered SMM News, March 24: SS futures rose strongly. Affected by market fluctuations triggered by news of geopolitical conflict yesterday, SS futures rose sharply in the night session, and the daytime session maintained a fluctuating but relatively strong trend, closing at 14,290 yuan/mt by midday. In the spot market, boosted by the sharp rise in SS futures, market confidence somewhat recovered; although the increase in traders' spot quotations was limited, both inquiries and transactions showed signs of recovery during the week. The current market is heavily disturbed by news factors, and changes in the geopolitical conflict still need close attention. The most-traded SS futures contract strengthened and moved higher. At 10:15 a.m., SS2605 was quoted at 14,305 yuan/mt, up 125 yuan/mt from the previous trading day. Spot premiums for 304/2B in Wuxi were in the range of 115-315 yuan/mt. In the spot market, the average price of cold-rolled 201/2B coils in Wuxi rose by 50 yuan/mt; for cold-rolled trim-edge 304/2B coils, the average price in Wuxi rose by 50 yuan/mt, while the average price in Foshan was unchanged; cold-rolled 316L/2B coils in Wuxi were unchanged; for hot-rolled 316L/NO.1 coils, Wuxi quotations were unchanged; cold-rolled 430/2B coils in both Wuxi and Foshan were also unchanged. As the market entered the traditional peak consumption season of "Golden March and Silver April," although the stainless steel market ushered in a seasonal recovery window, end-use demand fell short of expectations, downstream wait-and-see sentiment gradually intensified, and the procurement side only maintained a restocking pace for rigid demand, with none of the transaction momentum typically seen in the peak season emerging. The market's view on stainless steel prices...
Mar 24, 2026 14:24Dalian iron ore was generally weak today. The most-traded contract, I2605, finally closed at 806.5 yuan/mt, down 1.83% from the previous trading session. Spot prices fell by about 10-15 yuan from the previous trading day. Traders actively offered quotes, while steel mills mainly made inquiries and purchases based on rigid demand, with cautious inquiries; overall, the spot market trading atmosphere was average. According to the latest SMM survey data, hot metal daily average production reached 2.4049 million mt this week, an increase of 15,000 mt WoW, with demand showing a steady improvement. In terms of supply, some iron ore originally planned for shipment to the Middle East began to be redirected to the Chinese market, including some ore grades used for direct reduced iron (DRI), increasing market supply options and putting some pressure on prices. From a macro perspective, the situation in the Middle East remained tense, and the escalation of war triggered a sharp rise in energy prices, driving up global inflationary pressure. Expectations for US dollar interest rate cuts weakened significantly, leading to a certain pullback in commodity prices, including iron ore prices. Overall, iron ore prices faced strong resistance in the short term, but downside room was limited, and the market is expected to continue moving in a sideways range.
Mar 25, 2026 17:29[SMM Daily Brief Review of Coking Coal and Coke] In terms of supply, with costs remaining high, most coke producers saw wider losses and began to push for a coke price hike, but losses remained within an acceptable range, and coke production stayed stable. On the demand side, steel trading improved somewhat, steel mills became more willing to produce, and daily average hot metal production continued to increase, further boosting rigid demand for coke. Overall, coke fundamentals shifted toward tightness, but steel mills showed only average acceptance of higher coke prices, and the coke market may remain generally stable with slight rise in the short term.
Mar 25, 2026 15:59Dalian iron ore futures rose in early trading and pulled back in the afternoon. The most-traded contract, I2605, finally closed at 824 yuan/mt, up 0.55% from the previous trading session. Spot prices rose by about 2-5 yuan from the previous trading day. Traders were relatively active in offering quotes, while steel mills made fewer inquiries and purchased cautiously, with overall transactions in the spot market remaining average. In terms of fundamental data, blast furnace maintenance intensity continued to pull back this week, with maintenance affecting hot metal production by 1.65 million mt, down 206,500 mt WoW. It was expected to decrease by a further 180,000 mt next week to 1.4684 million mt, indicating a gradual improvement on the demand side. In terms of supply, tight supply still persisted in the market, and there was no news of any significant adjustment, which remained supportive for iron ore in the short term. However, some funds, out of concern over downstream risks, tended to stay on the sidelines, and overall wait-and-see sentiment was strong. In summary, iron ore prices were expected to hover at highs in the short term.
Mar 24, 2026 16:55On Tuesday, Eastern Time, Chicago Fed President Goolsbee warned that the energy shock stemming from the Middle East conflict is threatening the US Fed’s dual mandate, complicating its monetary policy outlook and potentially delaying interest rate cuts—echoing earlier remarks by Fed Governor Barr that inflation risks and oil prices support keeping rates unchanged for longer. Specifically, the energy price shock poses risks to both sides of the US Fed’s dual mandate, making the trade-off between controlling inflation and supporting economic growth more complex. “The new shock has undoubtedly disrupted the US Fed’s plans... and inflation was already uncomfortably high even before the shock occurred,” Goolsbee said bluntly. Goolsbee noted that central bank policymakers around the world lack clear historical experience to draw on in dealing with the current mix of geopolitical risks and inflationary pressures, and therefore “this is a bad situation for central banks.” Goolsbee stressed that the current path of interest rates at central banks around the world still depends heavily on how the conflict evolves, especially its impact on energy markets. As for the US Fed, he said he is not yet able to judge whether it will be able to cut interest rates again, because that outlook depends on the duration of the conflict and the extent to which rising oil prices affect overall inflation. “Only if inflation shows improvement can one realistically expect rates to fall this year,” he added, further reinforcing the US Fed’s data-dependent stance. The US Fed’s Internal Stance Is Turning More Cautious These remarks by Goolsbee were highly consistent with earlier comments by Fed Governor Michael Barr. Barr had previously also emphasized that, given that US inflation remains above target and elevated oil prices are further pushing up inflation, interest rates may need to remain unchanged “for some time.” In addition, Barr likewise pointed out that although the US labour market appears to be stabilizing, US Fed officials need to see clear evidence of sustained disinflation before considering interest rate cuts. Taken together, these comments highlight the US Fed’s increasingly cautious shift in stance. As geopolitical developments exert a growing influence on the US inflation outlook, the combination of persistent price pressures and external shocks has reinforced expectations that high inflation will last longer, while also creating uncertainty over the feasibility of further policy easing in the near term. For markets, the key point is that after the Russia-Ukraine shock several years ago, energy-driven inflation risks have now been firmly incorporated into the US Fed’s reaction function. As a result, US Fed rate expectations may remain sensitive not only to economic data, but also to developments in the Middle East conflict and their impact on oil prices.
Mar 25, 2026 10:46As supply and demand for construction steel were not fully matched across different markets, regional supply-demand mismatches created price differentiation, which in turn drove the cross-regional circulation of steel resources. When the regional price spread gradient was appropriate, regions with surplus construction steel capacity and production often shipped excess resources out, thereby rebalancing construction steel resources across regions.
Mar 24, 2026 15:54SMM will launch two new price points for Indonesia 316L stainless steel, "Indonesia 316L/NO.1 Coil Mill Edge" and "Indonesia 316L/2B Coil Mill Edge," effective March 13, 2026.
PriceMar 11, 2026 18:14In recent years, Indonesia has solidified its position as a global supply and export hub for the stainless steel industry. With the continuous upgrade of local production capabilities, the export volume of 304L series stainless steel has seen significant growth. Due to its superior intergranular corrosion resistance and weldability, 304L is increasingly demanded in the chemical, energy, and high-end manufacturing sectors across Asia, Europe, and the Middle East. To better reflect the supply-demand fundamentals of the low-carbon stainless steel market and to provide global traders and downstream users with more precise settlement references and risk management tools, SMM has decided to expand its overseas price assessment portfolio. Effective December 26, 2025 , SMM will officially launch the following two new price points: "304L/NO.1 Coil-ME, FOB Indonesia, USD/mt" and "304L/2B Coil-ME, FOB Indonesia, USD/mt" . The details of the new price points are as follows: 1. Product Name: 304L/NO.1 Coil-ME, FOB Indonesia, USD/mt Quality: Standard thickness 4mm, thickness range 4.0-8.0mm, width 1520mm, Mill Edge, conforming to ASTM A480/A480M. Brand Listing: ITSS, GCNS, OSS Definition: FOB Indonesia main ports Unit: USD/tonne Quantity: Min 20 tonnes Timing: 1-3 Months Publication Time: Daily, by 11:00 am Jakarta Time (Working Days) Payment Terms: L/C / TT at sight in USD, or other payments normalized. 2. Product Name: 304L/2B Coil-ME, FOB Indonesia, USD/mt Quality: Standard thickness 2mm, thickness range 1.5-2.0mm, width 1240mm, Mill Edge, conforming to ASTM A480/A480M. Brand Listing: Yongwang, Ruipu, IMR ARC Steel Definition: FOB Indonesia main ports Unit: USD/tonne Quantity: Min 20 tonnes Timing: 1-3 Months Publication Time: Daily, by 11:00 am Jakarta Time (Working Days) Payment Terms: L/C / TT at sight in USD, or other payments normalized. For any inquiries, please contact the SMM Nickel & Stainless Steel Industry Research Department. SMM Nickel & Stainless Steel Industry Research Department December 18, 2025
PriceDec 18, 2025 17:50Dear Customer, Dear Valued Client, To keep pace with the rapid development of the secondary copper industry and meet the market's need for in-depth analysis of the recycling industry and the supply-demand pattern of copper cathode, our company has conducted a deep optimization of our data models. We are now systematically upgrading and adjusting the standards and content of monthly supply-demand balance data related to China's copper scrap, and implementing the following treatment for historical data: I. Adjustments Made This upgrade primarily optimizes and updates the following indicators in the balance sheet: Discontinuation of "SMM Domestic Copper Scrap Supply" and "SMM Domestic Copper Scrap Supply - Forecasted Value," and adjustment of the two data points under "Domestic Copper Scrap Production": "Domestic Old Scrap Production (Metal Content)" and "Domestic Old Scrap Production (Metal Content) - Forecasted Value." (Data modification path: Database - Copper - Copper Scrap - Production) II. Treatment of Historical Data Historical domestic copper scrap production data will no longer be updated starting from September 2025. Subsequent data will be uniformly released according to the new standards, with the revised data retroactively applied from January 2025. If you have any questions, please feel free to contact the SMM customer service team at any time. Thank you for your continued support and trust! III. Effective Date Effective from February 1, 2026 SMM Information & Technology Co., Ltd. SMM Copper Research Team Liang Kaihui, 86-21-5159-5826 January 21, 2026
DataJan 21, 2026 13:54